Objective: To compare the consistency between bioelectrical impedance analysis (BIA) and dual energy X ray absorptiometry (DXA) in measuring body composition among Tibetan children and adolescents and to explore the applicability of BIA in plateau region, so as to provide scientific and convenient body composition measurement support among children and adolescents. Methods: From May to June, 2022, a total of 344 Tibetan children and adolescents aged 6-17 years were selected from Golmud Municipal National Middle School and Changjiangyuan Nationality Primary School in Qinghai Province by cluster sampling method, and their fat mass, fat mass percentage and lean mass were measured by DXA and BIA. The consistency and correlation between the two methods were assessed by using the Wilcoxon rank-sum test, Spearman correlation analysis, intraclass correlation coefficient (ICC), and Bland-Altman analysis. Results: DXA measured fat mass and fat mass percentage were significantly higher than those obtained by BIA (6-12 years old: Z =9.91, 11.28; 13-17 years old: Z =9.02, 10.21), while lean mass and lean mass percentage were significantly lower than BIA results (6-12 years old: Z =-11.60, -11.30; 13-17 years old: Z =-10.77, -10.36) (all P < 0.05 ). The two methods showed strong correlations in fat mass and lean mass (all r >0.80, all ICC >0.90), but exhibited poor agreement in fat mass percentage and lean mass percentage (6-12 years old: Lin s CCC =0.64, 0.41; 13-17 years old: Lin s CCC = 0.79 , 0.35). Bland-Altman analysis showed that the difference between the two methods was negatively correlated with the average value in FM%(6-12 years old: r =-0.75, 13-17 years old: r =-0.79, both P <0.01). Conclusion BIA and DXA show high consistency in measuring body fat mass and lean body mass in Tibetan children and adolescents, although some bias is still present in certain individuals.

To summarize the clinical characteristics, antibody spectrum and neuroelectrophysiological features of autoimmune nodopathy(AN), and to explore the phenotypic differences among different antibody-positive subgroups.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

Three evaluation methods were recommended for the key properties of the intravascular catheter lubricating coating such as stability,lubricity and integrity,including insoluble particle test method,friction test procedure and appearance detection method.Fifteen batches of microcatheters produced by different manufacturers were selected for testing to clarify the three methods in test principle,step,result,characteristic.References were provided for the design,production,evaluation and regulation of intravascular catheters with lubricant coatings.[Chinese Medical Equipment Journal,2025,46(1):66-72]

Questionnaire survey and symposium were carried out on the implementation of GB 8369.1-2019 Transfusion sets for single use—Part 1:Gravity feed,and then analyses were performed on its implementation by relative enterprises,inspection and testing organizations and regulatory authorities,applicability,coordination and implementation constraints accordingly.Some suggestions were put forward,and it was of great significance for comprehensively grasping the overall situation,efficacy and problems of the standard implementation,promoting the updating and upgrading of the standard and facilitating the implementation of compulsory standards.[Chinese Medical Equipment Journal,2025,46(9):70-74]

Functional dyspepsia (FD), characterized by persistent or recurrent dyspeptic symptoms without identifiable organic, systemic or metabolic causes, is an increasingly recognized global health issue. The objective of this guideline is to equip clinicians and nursing professionals with evidence-based strategies for the management and treatment of adult patients with FD using traditional Chinese medicine (TCM). The Guideline Development Group consulted existing TCM consensus documents on FD and convened a panel of 35 clinicians to generate initial clinical queries. To address these queries, a systematic literature search was conducted across PubMed, EMBASE, the Cochrane Library, China National Knowledge Infrastructure (CNKI), VIP Database, China Biology Medicine (SinoMed) Database, Wanfang Database, Traditional Medicine Research Data Expanded (TMRDE), and the Traditional Chinese Medical Literature Analysis and Retrieval System (TCMLARS). The evidence from the literature was critically appraised using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) approach. The strength of the recommendations was ascertained through a consensus-building process involving TCM and allopathic medicine experts, methodologists, pharmacologists, nursing specialists, and health economists, leveraging their collective expertise and empirical knowledge. The guideline comprises a total of 43 evidence-informed recommendations that span a range of clinical aspects, including the pathogenesis according to TCM, diagnostic approaches, therapeutic interventions, efficacy assessments, and prognostic considerations. Please cite this article as: Zhang SS, Zhao LQ, Hou XH, Bian ZX, Zheng JH, Tian HH, Yang GH, Hong WS, He YY, Liu L, Shen H, Li YP, Xie S, Shu J, Zeng BF, Li JX, Liu Z, Xiao ZH, Xiao JD, Zheng PY, Huang SG, Chen SL, Fei GJ. International clinical practice guideline on the use of traditional Chinese medicine for functional dyspepsia (2025). J Integr Med. 2025; 23(5):502-518.
Dyspepsia/drug therapy* ; Humans ; Medicine, Chinese Traditional/methods* ; Practice Guidelines as Topic ; Drugs, Chinese Herbal/therapeutic use*

Coronary heart disease is a common cardiovascular disease.Intravascular imaging plays an important role in the management of coronary artery disease.In contemporary clinical practice,intravascular ultrasound(IVUS)and optical coherence tomography(OCT)are widely used.Near-infrared spectroscopy(NIRS)has attracted much attention due to the advantage of being able to sensitively identify lipid components.In recent years,NIRS is still being explored,although some applications have been reported.Lipids play an important role in the assessment of atherosclerotic plaque stability,which further affects the progression and prognosis of coronary heart disease.Therefore,this article will review the current application of NIRS in the diagnosis and treatment of coronary heart disease.It further provides an imaging basis for clinical disease diagnosis and treatment,evaluation and the development of multimodal technology.

Objective:To develop and validate an artificial intelligence-assisted system based on convolutional neural networks (CNN) for automatic lesion recognition in small intestinal capsule endoscopy.Methods:Three small intestinal capsule endoscopy datasets were used for training ( n=26 638), validating ( n=6 652), and testing ( n=1 013) the deep learning model, covering 12 lesion categories, including vascular malformations, hemorrhage, erosion, erythema, stenosis, lymphangiectasia, submucosal tumors, polyps, lymphoid follicles, foreign bodies, veins, and normal mucosa. CNN performance was measured by area under receiver operating characteristic curve (AUC), sensitivity, specificity, precision, accuracy, and F1 score, with comparisons with endoscopists of different experience levels. Results:The top-performing model (EfficientNet-CE) achieved 86.28% sensitivity, 98.67% specificity, and AUC of 0.987 4 across all categories. It demonstrated high accuracy (86.28%) and a processing speed of 52.43 frames per second, approximately 42.4 times faster than junior endoscopists (<3 years' experience) and 40.3 times faster than senior endoscopists (>5 years' experience).Conclusion:The CNN-based model allows rapid, accurate identification of 12 small intestinal lesion types and effectively supports endoscopists in reviewing capsule endoscopy examinations due to its high sensitivity.