Abstract To promote adolescents active participation in physical activity and improve sleep quality, the article analyzes the relationship of adolescent physical activity with subjective sleep satisfaction, sleep latency, sleep continuity, sleep efficiency, and sleep duration. It explores potential mechanisms underlying the link between physical activity and sleep quality, including physiological mechanisms (circadian rhythms, body temperature, neuroendocrine systems, and immune function), and psychological mechanisms (stress relief, improvement of negative emotions, and promotion of mental relaxation). Based on existing research, it is recommended that adolescents engage in moderate to vigorous physical activity daily to promote improved sleep quality.

In recent years， repetitive transcranial magnetic stimulation （rTMS） has garnered significant attention as a therapeutic approach for sleep disorders in the elderly. However， the prevailing rTMS protocols are predominantly developed based on normative neurophysiological data derived from young adults and fail to incorporate individualized parameters tailored to the brain characteristics of the elderly. To address this gap， the consensus development group synthesized the latest evidence from 2010 to 2025 and established a standardized rTMS protocol specifically for elderly patients with sleep disorders. Adhering to the Appraisal of Guidelines for Research and Evaluation II （AGREE II） framework， systematically screened randomized controlled trials （RCTs） and systematic reviews regarding rTMS in the treatment of sleep disorders across various conditions. Meanwhile， the Grading of Recommendations Assessment， Development and Evaluation （GRADE） system was employed to rigorously grade the quality of evidence and the strength of recommendations. This consensus guideline delineates precise rTMS protocols for the management of sleep disorders in the elderly， highlights the adjustment of stimulation intensity according to scalp-cortex distance recommends either MRI‑guided neuronavigation or the Beam F3/F4 heuristic approach for accurate target localization， thereby providing precise rTMS intervention protocol for sleep disorders in the elderly， aiming to enhance clinical efficacy while ensuring treatment safety. ［Funded by National Key Research and Development Program （number， 2023YFC3603200）； General Program of Shenzhen Science and Technology Innovation Commission （number， JCYJ20240813112859008， JCYJ20240813112900002）； Youth Program of Shenzhen Kangning Hospital （number， KN2023A004）； www.guidelines-registry.cn number， PREPARE-2026CN530］

Objective: To investigate the association between brain and muscle Arnt like protein 1( BMAL 1) gene and ambulatory blood pressure (ABP) parameters in college students, and to explore the influence of the interaction between the gene and weight status on the ABP levels, so as to provide reference for early prevention of chronic cardiovascular diseases related to hypertension. Methods: During September 2022 to June 2024, a total of 510 college students were recruited from a university in Changsha, China for on site questionnaire investigation, physical examination, ABP monitoring and genotyping testing. Multiple linear regression method was used to explore the association between the BMAL 1 gene and ABP indicators. An interaction term was included in the general linear model of multiple linear regression to analyze the interactive effects of BMAL 1 gene polymorphisms and weight status on ABP levels. Results: The prevalence of abnormal 24 hour blood pressure, abnormal daytime blood pressure, and abnormal nighttime blood pressure were 3.3%, 3.1%, and 3.9%, respectively. Multiple linear regression analysis showed that the BMAL 1/rs7950226 polymorphism was positively correlated with the 24 hour diastolic blood pressure(DBP) and the daytime DBP level after adjusting for gender, age, and body mass index( β =0.87,0.99, both P <0.05). Also, interaction between BMAL 1/ rs 11022775 and weight status on the nighttime DBP level ( P interaction =0.03) was found. The CC genotype carriers had significantly higher nighttime DBP level ( β =3.52, P <0.05) among overweight/obesity college students, but no differences in nocturnal DBP levels were observed between CC genotype carriers and TT+CT genotype carriers among college students with normal body weight( P > 0.05). Conclusions The rs 7950226 polymorphism is associated with 24 hours DBP and daytime DBP levels. Significant interaction between rs 11022775 with weight status on the nighttime DBP level is found among college students.

Objective To understand mosquito density, species composition, and seasonal variations around the Beijing Capital International Airport(BCIA)and provide scientific evidence for mosquito-borne disease prevention and control. Methods Meteorological data were collected from 2016 to 2022, and mosquito density was monitored at seven surveillance sites around the BCIA from May to October each year using CO2-baited mosquito traps to analyze the relationship between mosquito density and meteorological factors. Results In total,68 518 female mosquitoes were captured, with a mosquito density of 10.20 per light · hour. The dominant species was Culex pipiens pallens(73.90%), followed by Aedes albopictus(9.71%)and Ae. vexans(9.29%);the mosquito density was highest in 2016(14.8 per light·hour)and lowest in 2022(4.46 per light·hour). Significant statistical differences were observed in mosquito density among different species(F=18.118, P<0.05). The density of Cx. pipiens pallens and other mosquito species showed a mutually exclusive trend; the peak of mosquito density varied based on years and habitats, with significant statistical differences in mosquito density among different habitats(F=8.504, P<0.05). The highest mosquito density was observed near the Wenyu River(21.50 per light·hour), whereas the lowest was recorded at the BCIA construction site(2.44 per light· hour). The monthly average temperature(r=0.595), monthly average highest temperature(r=0.575), and monthly average lowest temperature(r=0.624)showed moderate positive correlations, whereas the monthly average air pressure(r=-0.484)showed a moderate negative correlation. The monthly average minimum temperature was included in the regression model(F=25.575, P<0.000), and the equation Y=1.029X4-8.181 was used. The monthly average air pressure 2 months prior(b=-2.418, β=-1.619, P<0.05)and the monthly average relative humidity(b=-0.739, β=-1.201, P<0.05)significantly negatively predicted the mosquito density. Notably, the regression equation used was y=2526.170+(-2.418)X9+(-0.739)X13. The exposure-response analysis revealed that the density of mosquitoes was not linearly related to the average monthly air pressure, rainfall, and duration of sunshine. Conclusions The dominant mosquito species around the BCIA was Cx. pipiens pallens, Ae. albopictus, and Ae. vexans. During the control of Cx. pipiens pallens, the impact on other mosquito species must also be considered. Environmental management, breeding sites, and scientific use of pesticides should be prioritized based on the activity periods of mosquitoes. Further studies on mosquitoes and meteorological factors should be conducted to provide references and novel avenues for mosquito control.

Objective To analyze the incidence rate and risk factors of atrial fibrillation (AF) in elderly patients with chronic obstructive pulmonary disease (COPD). Methods A total of 392 patients with COPD in the hospital were selected from December 2020 to December 2024. Patients' data (medical history, echocardiographic data, etc.) were recorded. The incidence rate of AF in patients was recorded and the patients were grouped according to whether or not they developed AF. The differences were compared between the two groups, and the risk factors of AF occurrence in elderly patients with COPD were analyzed. Results Among the 392 patients with COPD, 127 cases (32.40%) met the diagnostic criteria of AF. There were statistically significant differences in age, pulmonary infection, heart failure, diabetes, smoking history, disease duration, LAD, severe renal insufficiency and coronary heart disease between the AF group and the non-AF group (P<0.05). Multivariate logistic regression analysis suggested that age, pulmonary infection, heart failure, diabetes mellitus, smoking history, disease course, LAD, severe renal insufficiency and coronary heart disease were all risk factors for elderly patients with COPD (OR=1.129, 4.246, 3.955, 4.125, 2.038, 1.112, 1.102, 4.397, and 3.865, P<0.05). Conclusion The incidence rate of AF is high in elderly patients with COPD. Age, pulmonary infection, heart failure, diabetes mellitus, smoking history, course of disease, LAD, severe renal insufficiency, and coronary heart disease are all risk factors for AF.

Objective: To analyze the distribution characteristics of fluoride and trichloromethane in drinking water in rural schools in Guizhou Province and assess their health risks, so as to provide a scientific basis for ensuring the safety of drinking water in rural schools. Methods: During the dry season (March to May) and wet season (July to September) of 2020 to 2022, 788 rural primary and secondary schools in agricultural counties (districts) in Guizhou Province were selected for investigation by using a direct sampling method. A total of 1 566 drinking water samples were collected from these schools, and the mass concentrations of fluoride and trichloromethane in the water samples were detected. The Mann-Whitney U test was used for intergroup comparison, and a health risk assessment model was employed to evaluate the health risks of students oral intake of fluoride and trichloromethane. Results: From 2020 to 2022, the mass concentrations of fluoride and trichloromethane in the drinking water of rural schools in Guizhou Province all met the standards, and the ranges were no detection to 0.99 mg/L and (no detection to 0.06)×10 -3 mg/L, respectively. The mass concentrations of fluoride in dry and wet seasons were 0.05(0.05,0.10), 0.05(0.05,0.10) mg/L, the mass concentrations of trichloromethane were [0.02(0.02,1.00)]×10 -3 , [0.02(0.02,1.00)]×10 -3 mg/L, the mass concentrations of fluoride in factory water and terminal water were 0.05(0.05,0.05), 0.05(0.05,0.10) mg/L, and the differences were not statistically significant ( Z=-0.04, -0.88, - 0.98 , P >0.05). There was a statistically significant difference in the mass concentration of trichloromethane between factory water and peripheral water [0.02(0.02,0.02)×10 -3 , 0.02(0.02,1.05)×10 -3 mg/L]( Z=-2.16, P < 0.05 ). The non-carcinogenic risk assessment values for students oral exposure to fluoride and trichloromethane were in the range of 0.01(0.01,0.03)-0.03(0.03,0.06) and [0.26( 0.26 ,14.54)]×10 -4 -[0.52(0.52,48.62)]×10 -4 , respectively, all of which were at acceptable levels; the carcinogenic risk assessment values for oral exposure to trichloromethane were in the range of [0.08(0.08, 4.51 )]×10 -7 -[0.16(0.16,15.07)]×10 -7 , indicating a low risk. Conclusions The health risks of students expore to fluoride and trichloromethane in drinking water in rural schools of Guizhou Province are low. It is necessary to strengthen the standardized management of disinfection in some rural drinking water projects and the monitoring of fluoride in water sources to reduce the exposure risk to children.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.

Objective: To evaluate the feasibility of dynamic contrast-enhanced MRI (DCE-MRI) in differentiating tumor deposits (TDs) from metastatic lymph nodes (MLNs) in rectal cancer. Materials and Methods: A retrospective analysis was conducted on 70 patients with rectal cancer, including 168 lesions (70 TDs and 98 MLNs confirmed by histopathology), who underwent pretreatment MRI and subsequent surgery between March 2019 and December 2022. The morphological characteristics of TDs and MLNs, along with quantitative parameters derived from DCE-MRI (K trans , kep, and v e) and DWI (ADCmin, ADCmax, and ADCmean), were analyzed and compared between the two groups.Multivariable binary logistic regression and receiver operating characteristic (ROC) curve analyses were performed to assess the diagnostic performance of significant individual quantitative parameters and combined parameters in distinguishing TDs from MLNs. Results: All morphological features, including size, shape, border, and signal intensity, as well as all DCE-MRI parameters showed significant differences between TDs and MLNs (all P < 0.05). However, ADC values did not demonstrate significant differences (all P > 0.05). Among the single quantitative parameters, v e had the highest diagnostic accuracy, with an area under the ROC curve (AUC) of 0.772 for distinguishing TDs from MLNs. A multivariable logistic regression model incorporating short axis, border, v e, and ADC mean improved diagnostic performance, achieving an AUC of 0.833 (P = 0.027). Conclusion The combination of morphological features, DCE-MRI parameters, and ADC values can effectively aid in the preoperative differentiation of TDs from MLNs in rectal cancer.