ObjectiveTo compare the differences between wild Alpiniae Oxyphyllae Fructus（WAOF） and cultivated Alpiniae Oxyphyllae Fructus（CAOF） through a traditional quality evaluation system for medicinal materials. MethodsA total of 10 batches of WAOF and 12 batches of CAOF samples were collected from various regions of Hainan province. Relevant analytical methods from the 2020 edition of the Pharmacopoeia of the People's Republic of China were employed to observe the characteristics of WAOF and CAOF， followed by microscopic identification， thin-layer chromatography（TLC） identification， moisture content（toluene method）， total ash， acid-insoluble ash， water-soluble and alcohol-soluble extracts（hot dipping method）， water-soluble protein， total polysaccharides and total flavonoids（ultraviolet spectrophotometry）， and volatile oil content（method A under general rule 2204）. The contents of five active components（protocatechuic acid， chrysin， kaempferol， tectochrysin and nootkatone） were quantified using ultra-performance liquid chromatography（UPLC）， and the antioxidant activity was evaluated. Building upon traditional quality evaluation of AOF， quantitative measurements were conducted on its appearance traits including diameter， length， plumpness（diameter/length ratio）， and color. Canonical correlation analysis was performed using SPSS 26.0 to explore relationships between appearance traits and intrinsic quality. ResultsNo significant differences were observed between WAOF and CAOF in microscopic observation， TLC identification， moisture content， protocatechuic acid content， kaempferol content， odor， or antioxidant activity measured by 2，2ʹ-azino-bis（3-ethylbenzothiazoline-6-sulfonic acid）（ABTS） method. WAOF exhibited significantly higher levels in water-soluble extracts， alcohol-soluble extracts， total polysaccharide content， water-soluble protein content， 100-grain weight， length， and total color difference（ΔE^*ab） compared to CAOF（P<0.01）. In contrast， CAOF showed significantly higher levels of total ash， acid-insoluble ash， content of total flavonoids， volatile oil content， chrysin content， tectochrysin content， nootkatone content， diameter， plumpness， lightness（L^*）， red-green chromaticity（a^*）， yellow-blue chromaticity（b^*）， and antioxidant activity measured by 1，1-diphenyl-2-picrylhydrazyl（DPPH） method compared to WAOF（P<0.01）. Correlation analysis between 7 phenotypic traits and 8 quality traits revealed that among the phenotypic traits， plumpness， L^*， a^*， and b^* exerted significant influence on intrinsic quality. Among the quality traits， total flavonoids， volatile oils， nootkatone， chrysin， and tectochrysin contributed substantially to intrinsic quality. ConclusionPlumpness， L^*， a^*， and b^* of AOF significantly influence its intrinsic quality， and higher values of these parameters indicate relatively superior intrinsic quality. The comprehensive quality evaluation reveals that CAOF samples collected in this study are superior to their wild counterparts.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

ObjectivePancreatic ductal adenocarcinoma (PDAC) exhibits a limited response to current treatments due to its dense fibrotic stroma and highly immunosuppressive tumor microenvironment. In recent years, advancements in cellular immunotherapy, particularly chimeric antigen receptor macrophage (CAR-M) therapy, have offered new hope for pancreatic cancer treatment. Although CAR-M therapy demonstrates dual potential in directly killing tumor cells and remodeling the immune microenvironment, it still faces challenges such as complex in vitro preparation processes and low in vivo targeting and delivery efficiency. Therefore, developing strategies for efficient and targeted in vivo delivery of CAR genes has become crucial for overcoming current therapeutic limitations. This study aims to develop an orally administrable nano-gene delivery system for the targeted delivery of CAR genes to pancreatic tumor sites. MethodsCore nano-gene particles (PNP/pCAR) were constructed by loading plasmid DNA encoding CAR (pCAR) with cationic polypeptides (PNP). Subsequently, PNP/pCAR was surface-modified with β-glucan to prepare the targeted nanoparticles (βGlus-PNP/pCAR). The loading efficiency of PNP for pCAR was quantitatively assessed by gel retardation assay. The particle size, Zeta potential, morphology, and storage stability of PNP/pCAR were characterized using a Malvern particle size analyzer and transmission electron microscopy. At the cellular level, RAW 264.7 macrophages were selected. The cytotoxicity of PNP/pCAR was evaluated using the CCK-8 assay. The cellular uptake efficiency and lysosomal escape ability of the nanoparticles were assessed via flow cytometry and confocal microscopy. Transfection efficiency was quantitatively evaluated by detecting the expression of the reporter gene GFP using flow cytometry. At the in vivo level, an orthotopic pancreatic cancer mouse model was established. Cy7-labeled βGlus-PNP/pCAR nanoparticles were administered orally, and the fluorescence distribution in mice was dynamically monitored at 1, 2, 4, 8, and 16 h post-administration using a small animal in vivo imaging system. Forty-eight hours after oral gavage, the mice were euthanized, and pancreatic tumor tissues were collected for further analysis of intratumoral fluorescence signals using the imaging system. Additionally, βGlus-PNP/pCAR-GFP nanoparticles loaded with the reporter gene (GFP) were administered orally. Forty-eight hours post-administration, pancreatic tumor tissues were harvested to prepare frozen sections, and GFP expression was observed and analyzed under a fluorescence microscope. ResultsThe PNP carrier exhibited a high loading capacity for pCAR. The successfully prepared PNP/pCAR nanoparticles were regular spheres with a hydrodynamic diameter of approximately (120±10) nm and a Zeta potential of about +(6±1) mV. They maintained good structural stability after incubation in PBS buffer for 7 d. Cell experiments demonstrated that PNP/pCAR exhibited no significant cytotoxicity in RAW 264.7 cells while being efficiently internalized and effectively escaping lysosomal degradation. The transfection positive rate of PNP/pCAR-GFP in RAW 264.7 cells reached (25±3)%, surpassing that of Lipofectamine 2000-loaded pCAR-GFP (Lipo/pCAR-GFP), which was (20±1)%.In vivo experiments revealed that, compared to unmodified PNP/pCAR, βGlus-PNP/pCAR exhibited strongerin situ pancreatic tumor targeting ability after oral administration. Furthermore, oral administration of βGlus-PNP/pCAR-GFP resulted in significant GFP protein expression detectable within pancreatic tumor tissues. ConclusionThis study successfully constructed and validated an orally administrable, pancreatic cancer-targeting polypeptide-based nano-gene delivery system. It provides an important technological foundation in delivery systems and experimental basis for the subsequent development of in situ CAR-M-based therapeutic strategies for pancreatic cancer.

BackgroundPrenatal depression has an important impact on maternal health and pregnancy outcomes. Previous studies have shown that maternal prenatal depression is associated with social support， and social support is related to fear of childbirth. However， there is limited research on the relationship among maternal prenatal depression， social support and fear of childbirth， and no studies have specifically explored the influence of social support and fear of childbirth on prenatal depression in primiparous women. ObjectiveTo investigate the current status of prenatal depression among primiparous women， and to analyze the correlation between social support and fear of childbirth， and to further explore the influence of social support and fear of childbirth on prenatal depression in this population， so as to provide references for improving their mental health. MethodsA total of 380 primiparous women admitted to the inpatient department of Chengdu Wenjiang District People's Hospital from December 2022 to September 2023 were enrolled as study subjects. A self-made questionnaire， Edinburgh Postnatal Depression Scale （EPDS）， Social Support Rating Scale （SSRS） and Childbirth Attitudes Questionnaire （CAQ） were used to conduct the survey. Pearson correlation analysis was employed to examine the relationships between scale scores. Multiple linear regression analysis was conducted to identify influencing factors of prenatal depression. ResultsA total of 380 questionnaires were distributed， with 372 （97.89%） valid responses collected. Among the participants， 222 cases （59.68%） were identified with prenatal depression. Pearson correlation analysis revealed that EPDS score was negatively correlated with SSRS score （r=-0.283， P<0.01） and positively correlated with CAQ score （r=0.341， P<0.01）. Multiple linear regression analysis indicated that social support （β=-0.166， P<0.01） and fear of childbirth （β=0.269， P<0.01） were influencing factors of prenatal depression in primiparous women. ConclusionThe prevalence of prenatal depression among primiparous women is concerning， with depression levels showing significant associations with both social support and fear of childbirth.

The Expert Consensus on Clinical Application of Qinbaohong Zhike Oral Liquid in Treatment of Acute Bronchitis and Acute Attack of Chronic Bronchitis （GS/CACM 337-2023） was released by the China Association of Chinese Medicine on December 13^th， 2023. This expert consensus was developed by experts in methodology， pharmacy， and Chinese medicine in strict accordance with the development requirements of the China Association of Chinese Medicine （CACM） and based on the latest medical evidence and the clinical medication experience of well-known experts in the fields of respiratory medicine （pulmonary diseases） and pediatrics. This expert consensus defines the application of Qinbaohong Zhike oral liquid in the treatment of cough and excessive sputum caused by phlegm-heat obstructing lung， acute bronchitis， and acute attack of chronic bronchitis from the aspects of applicable populations， efficacy evaluation， usage， dosage， drug combination， and safety. It is expected to guide the rational drug use in medical and health institutions， give full play to the unique value of Qinbaohong Zhike oral liquid， and vigorously promote the inheritance and innovation of Chinese patent medicines.

Objective To establish and internally validate a predictive model for poorly differentiated adenocarcinoma based on CT imaging and tumor marker results. Methods Patients with solid and partially solid lung nodules who underwent lung nodule surgery at the Department of Thoracic Surgery, the Affiliated Brain Hospital of Nanjing Medical University in 2023 were selected and randomly divided into a training set and a validation set at a ratio of 7:3. Patients' CT features, including average density value, maximum diameter, pleural indentation sign, and bronchial inflation sign, as well as patient tumor marker results, were collected. Based on postoperative pathological results, patients were divided into a poorly differentiated adenocarcinoma group and a non-poorly differentiated adenocarcinoma group. Univariate analysis and logistic regression analysis were performed on the training set to establish the predictive model. The receiver operating characteristic (ROC) curve was used to evaluate the model's discriminability, the calibration curve to assess the model's consistency, and the decision curve to evaluate the clinical value of the model, which was then validated in the validation set. Results A total of 299 patients were included, with 103 males and 196 females, with a median age of 57.00 (51.00, 67.25) years. There were 211 patients in the training set and 88 patients in the validation set. Multivariate analysis showed that carcinoembryonic antigen (CEA) value [OR=1.476, 95%CI (1.184, 1.983), P=0.002], cytokeratin 19 fragment antigen (CYFRA21-1) value [OR=1.388, 95%CI (1.084, 1.993), P=0.035], maximum tumor diameter [OR=6.233, 95%CI (1.069, 15.415), P=0.017], and average density [OR=1.083, 95%CI (1.020, 1.194), P=0.040] were independent risk factors for solid and partially solid lung nodules as poorly differentiated adenocarcinoma. Based on this, a predictive model was constructed with an area under the ROC curve of 0.896 [95%CI (0.810, 0.982)], a maximum Youden index corresponding cut-off value of 0.103, sensitivity of 0.750, and specificity of 0.936. Using the Bootstrap method for 1000 samplings, the calibration curve predicted probability was consistent with actual risk. Decision curve analysis indicated positive benefits across all prediction probabilities, demonstrating good clinical value. Conclusion For patients with solid and partially solid lung nodules, preoperative use of CT to measure tumor average density value and maximum diameter, combined with tumor markers CEA and CYFRA21-1 values, can effectively predict whether it is poorly differentiated adenocarcinoma, allowing for early intervention.

Through consulting herbal medicine， medical books， and local chronicles from past dynasties to modern times， this paper systematically researched Spatholobi Caulis from name， origin， producing areas， harvesting， processing， usage， quality evaluation， functions and indications， providing a reference for the development and utilization of famous classical formulas containing Spatholobi Caulis. According to the research， Spatholobi Caulis was first recorded in the Annals of Shunning Prefecture from the Qing dynasty. It was originally a medicinal herb commonly used in Shunning， Yunnan， and was named from the red juice resembling chicken blood that flowed out after the vein was cut off. The mainstream original plants of each dynasty were Kadsura heteroclita and Spatholobus suberectus. Among them， K. heteroclita mainly focused on dispersing blood stasis and unblocking meridians， mainly treating rheumatic pain and injuries caused by falls or blows， and it is mostly used as the raw material of Jixueteng ointments. S. suberectus was commonly used as decoction pieces in decoction， which had the functions of promoting blood circulation and replenishing blood， activating meridians and collaterals， and mainly used for treating anemia， irregular menstruation， and rheumatic bone pain. The production area of Spatholobi Caulis recorded in the Qing dynasty was Yunnan. Currently， the main production area of S. suberectus is Guangxi， while the main production area of K. interior is Yunnan. In the Qing dynasty， the usage of Spatholobi Caulis was an individual prescription with other herbs before making ointments， which was usually composed of the juice of it， safflower， angelica， and glutinous rice. But in modern times， Spatholobi Caulis is mostly sliced and dried for use. The quality of Spatholobi Caulis is often determined by the number of reddish-brown concentric circles on the cut surface， with a higher number indicating better quality. Additionally， the presence of resinous secretions is also considered desirable. Based on the research findings， it is suggested that when developing famous classical formulas containing Spatholobi Caulis， the choice of the primary source should be S. suberectus or K. heteroclita， taking into consideration the therapeutic effects of the formula. It is also recommended that the latest plant classification be referenced in the next edition of Chinese Pharmacopoeia， adjusting the primary source of Kadsurae Caulis to K. heteroclita to avoid confusion caused by inconsistent original names， and the functions adjust to promote Qi circulation and relieve pain， disperse blood stasis and unblock collaterals， treating injuries caused by falls and bruises.

Process analytical technology(PAT) is a key means for digital transformation and upgrading of the traditional Chinese medicine(TCM) manufacturing process, serving as an important guarantee for consistent and controllable TCM product quality. Near-infrared(NIR) spectroscopy has become the core technology for measuring the TCM manufacturing process. By incorporating NIR spectroscopy into PAT and starting from the construction of a smart platform for the TCM manufacturing process, this paper systematically described the development history and innovative application of the combination of NIR spectroscopy with chemometrics in measuring the TCM manufacturing process by the research team over the past two decades. Additionally, it explored the application of a validation method based on accuracy profile(AP) in the practice of NIR spectroscopy. Furthermore, the software development progress driven by NIR spectroscopy supported by modeling technology was analyzed, and the prospect of integrating NIR spectroscopy in smart factory control platforms was exemplified with the construction practices of related platforms. By integrating with the smart platform, NIR spectroscopy could improve production efficiency and guarantee product quality. Finally, the prospect of the smart platform application in measuring the TCM manufacturing process was projected. It is believed that the software development for NIR spectroscopy and the smart manufacturing platform will provide strong technical support for TCM digitalization and industrialization.
Spectroscopy, Near-Infrared/methods* ; Drugs, Chinese Herbal/analysis* ; Software ; Medicine, Chinese Traditional ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

Medical institutions, with their clinical practice foundation and abundant human use experience data, have become important carriers for the inheritance and innovation of traditional Chinese medicine(TCM) and the "cradles" of the preparation of new TCM. To effectively promote the transformation of new TCM originating from the TCM clinical practice in medical institutions and establish an effective evaluation index system for the transformation of new TCM conforming to the characteristics of TCM, consensus experts adopted the literature research, questionnaire survey, Delphi method, etc. By focusing on the policy and technical evaluation of new TCM originating from the TCM clinical practice in medical institutions, a comprehensive evaluation from the dimensions of drug safety, efficacy, feasibility, and characteristic advantages was conducted, thus forming a comprehensive evaluation system with four primary indicators and 37 secondary indicators. The expert consensus reached aims to encourage medical institutions at all levels to continuously improve the high-quality research and development and transformation of new TCM originating from the TCM clinical practice in medical institutions and targeted at clinical needs, so as to provide a decision-making basis for the preparation, selection, cultivation, and transformation of new TCM for medical institutions, improve the development efficiency of new TCM, and precisely respond to the public medication needs.
Medicine, Chinese Traditional/standards* ; Humans ; Consensus ; Drugs, Chinese Herbal/therapeutic use* ; Surveys and Questionnaires