Objective: To investigate the association between monocyte to high-density lipoprotein cholesterol ratio (MHR) and periodontitis and to provide new epidemiologic evidence on the factors affecting periodontitis. Methods: Data on MHR, periodontitis, and other covariates were selected from the NHANES(National Health and Nutrition Examination) database for 3 cycles of subjects in 2009-2010, 2011-2012, and 2013-2014, and a total of 8 456 study subjects were included. The study participants were grouped according to the prevalence of periodontitis (presence or absence), and three regression models (unadjusted covariates, partially adjusted covariates, and fully adjusted covariates) were constructed to analyze the relationship between MHR and periodontitis by using a weighted logistic regression method with stepwise adjustment for confounders. MHR was divided into four groups from Q1 to Q4 according to quartiles from small to large for weighted trend analysis, and the nonlinear relationship between MHR (continuous) and periodontitis was analyzed using a restricted cubic spline with subgroup analysis and sensitivity analysis. Results: All three logistic regression models showed a positive association between MHR and periodontitis (OR = 2.92, 95%CI: 2.14-3.99, P<0.001 (not adjusted); OR = 1.97, 95%CI: 1.39-2.78, P<0.001 (partially adjusted); OR = 1.62, 95%CI: 1.10-2.39, P = 0.017 (fully adjusted)). Trend analysis showed a significantly higher risk of developing periodontitis in the Q4 group compared with the Q1 group in both single (OR = 1.92, 95% CI: 1.58-2.33, P<0.001) and multifactorial analyses (OR = 1.30, 95% CI: 1.03-1.64, P = 0.029). Restricted cubic spline results did not support a nonlinear relationship between MHR and periodontitis (P for nonlinear>0.05), subgroup analysis showed no significant interaction between the covariates and MHR (P>0.05), and sensitivity analysis also showed a positive correlation between MHR and periodontitis (OR = 1.67, 95%CI: 1.31-2.14, P<0.001). Conclusion MHR is positively associated with the risk of developing periodontitis.

Osteoporosis is a prevalent skeletal condition characterized by reduced bone mass and strength, leading to increased fragility. Buqi-Tongluo (BQTL) decoction, a traditional Chinese medicine (TCM) prescription, has yet to be fully evaluated for its potential in treating bone diseases such as osteoporosis. To investigate the mechanism by which BQTL decoction inhibits osteoclast differentiation in vitro and validate these findings through in vivo experiments. We employed MTS assays to assess the potential proliferative or toxic effects of BQTL on bone marrow macrophages (BMMs) at various concentrations. TRAcP experiments were conducted to examine BQTL's impact on osteoclast differentiation. RT-PCR and Western blot analyses were utilized to evaluate the relative expression levels of osteoclast-specific genes and proteins under BQTL stimulation. Finally, in vivo experiments were performed using an osteoporosis model to further validate the in vitro findings. This study revealed that BQTL suppressed receptor activator of NF-κB ligand (RANKL)-induced osteoclastogenesis and osteoclast resorption activity in vitro in a dose-dependent manner without observable cytotoxicity. The inhibitory effects of BQTL on osteoclast formation and function were attributed to the downregulation of NFATc1 and c-fos activity, primarily through attenuation of the MAPK, NF-κB, and Calcineurin signaling pathways. BQTL's inhibitory capacity was further examined in vivo using an ovariectomized (OVX) rat model, demonstrating a strong protective effect against bone loss. BQTL may serve as an effective therapeutic TCM for the treatment of postmenopausal osteoporosis and the alleviation of bone loss induced by estrogen deficiency and related conditions.
Animals ; NFATC Transcription Factors/genetics* ; Drugs, Chinese Herbal/pharmacology* ; Ovariectomy ; Osteoclasts/metabolism* ; Female ; Osteogenesis/drug effects* ; Rats, Sprague-Dawley ; Rats ; NF-kappa B/genetics* ; Osteoporosis/genetics* ; Signal Transduction/drug effects* ; Bone Resorption/genetics* ; Cell Differentiation/drug effects* ; Humans ; RANK Ligand/metabolism* ; Mitogen-Activated Protein Kinases/genetics* ; Transcription Factors

Tooth ankylosis is a clinical condition where the tooth cementum directly fuses with the surrounding alveolar bone,leading to functional and aesthetic defects.The etiology involves genetic,metabolic,and local stimulation factors.The diagnosis of tooth ankylosis requires a combination of clinical manifestations and imaging examinations to improve the diagnostic accuracy.The treatment of tooth ankylosis presents significant challenges.Orthodontic treatment combined with other disciplines offers a new,comprehensive treatment approach,integrating traditional orthodontic techniques with osteotomy,distraction osteogenesis,orthodontic bone traction,corticotomy,dislocation,and autologous tooth transplantation techniques.The treatment of tooth ankylosis requires the cooperation of multiple disciplines,and the experts from orthodontics,oral surgery,and oral medicine collaborate to develop the optimal treatment plan.This comprehensive treatment method achieves better outcomes compared with traditional treatments.This review discusses the etiology,diagnosis,and orthodontic combined multidisciplinary treatment methods of tooth ankylosis,analyzes the advantages and disadvantages of various treatment options,evaluates the efficacy and risks,and provides new perspectives for the treatment of tooth ankylosis.

Objective: To explore the effect of different miniscrew placement heights on the distribution of biological forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization, to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments. Methods: Mimics, GeomagicStudio 2017, SolidWorks 2016, and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the following six working conditions: working condition 1 was the control group without miniscrews; working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm, 7 mm, 4 mm, and 1 mm from the top of the alveolar crest, respectively; working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane. Results: On the sagittal axis, miniscrew anchorage caused distal displacement of all teeth. Compared to the control group, in the miniscrew group, the displacement of the anterior molars exceeded that of the second molars. On the vertical axis, the result in the control group was similar to backward bending; the results in the miniscrew groups resembled the effect of a lever, lowering the lateral incisors and canines and raising the central incisors and first premolars. On the coronal axis, the second premolars and the first molars showed lingual displacement in the control group, and only the premolars and first molars showed lingual displacementin the miniscrew groups. The canines were the teeth that were most strongly affected by the change in miniscrew placement height. Conclusion The higher the miniscrew position is, the stronger the protective effect on the anterior anchorage. According to the miniscrew placement height, the mandibular arch should be properly narrowed, the central incisors and first premolars should be lowered, and the lateral incisors and canines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To design an enhanced postoperative recovery checklist for the patients who had surgery for laryngeal cancer,hence to instruct the patient with a standard procedure in rehabilitation.Methods A total of 72 patients who had surgery for laryngeal cancer in our department from April 2020 and April 2021 were enrolled as study subjects for a controlled study before and after surgery of different patients.A total of 37 patients who had surgery between April and September 2020 were assigned in the control group,while another 37 patients who had the surgery between October 2020 and April 2021 were assigned in the trial group.Patients in the control group were managed with a routine enhanced perioperative recovery plan,and those in the trial group were managed with the checklist,which was drafted by modification and improvement of the routine enhanced perioperative recovery plan through literature reviews and expert consultations.The two groups were compared in terms of the standardised rate of enhanced recovery compliance,medical staff satisfaction,average hospital-stay and patient satisfaction.Results The trial group showed significant improvement in comparison with the control group in terms of the standardised rate of enhanced recovery compliance(93.28%versus 84.08%),score of satisfaction level[(95.57±2.25)versus(92.60±2.49)],score of doctor satisfaction[(35.75±0.89)versus(32.88±1.50)],and the score of nurse satisfaction[(35.45±1.10)versus(33.00±1.30)](all P<0.05).The average hospital-stay in the trial group was significantly shorter than that in the control group[(9.89±3.32)days versus(12.60±4.33)days](P<0.05).Conclusion The designed checklist can improve the standardised rate of enhanced recovery compliance,the satisfaction of both medical staff and patients and facilitate the recovery of patient.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.

Objective To create a mouse model of colorectal polyps with Apc-Kras-Cre gene mutations using the tamoxifen induction method.Methods Mice with Apc-Kras-Cre mutations were divided into four groups and injected intraperitoneally with different concentrations and dosages of tamoxifen for different durations,with group 1 injected with low dosage tamoxifen(5 mg/kg)for 1 day,group 2 injected with low dosage tamoxifen(5 mg/kg)for 3 days,group 3 injected with high dosage tamoxifen(50 mg/kg)for 1 day,group 4 injected with high dosage tamoxifen(50 mg/kg)for 3 days.C57BL/6J mice were used as a healthy control group and survival and changes in body weight were observed.All mice were euthanized 4 weeks post-tamoxifen induction and the colon length and number and size of intestinal polyps were observed.Histological changes in the intestinal tissue and polyps were detected by hematoxylin and eosin staining.Results The survival rate of male mice was higher(P＜0.001)and the morbidity rate of male mice was lower compared with female mice(P＜0.05).The survival rate differed significantly among the four groups(P＜0.01).All groups showed significant changes in body weight compared with the healthy control group(P＜0.001).There were also significant differences in weight changes between tamoxifen-induced groups 1 and 2,between groups 2 and 3,and between groups 1 and 4(P＜0.001,P＜0.01,P＜0.05,respectively).There were no significant differences in colon length between any treated group and the healthy control group(P＞0.05),but colon length did differ between tamoxifen-induced groups 1 and 3(P＜0.05).Polyp size varied in each group of tamoxifen-treated mice,with most polyps occuring at the distal end of the colon,while mice in groups 3 and 4 had more and larger polyps.Histopathological examination showed intestinal polyps with uneven and misaligned glandular and epithelial arrangements,a loosely-packed intestinal mucosal barrier,and irregularly-distributed crypts in tamoxifen-induced mice compared with the healthy control group,while mice in tamoxifen-induced groups 3 and 4 showed signs of inflammation and mice in group 4 showed necrosis of cells in some regions.Conclusions Tamoxifen-induced Apc-Kras-Cre model mice were successfully established,with the group 3 induction method being the most suitable.

Objective To explore the effect of different miniscrew placement heights on the distribution of biologi-cal forces produced by clear aligner combined with intramaxillary traction for mandibular molar distalization,to identify the miniscrew location that is conducive to the protection of lower anterior tooth anchorage and to provide a reference that can be used when designing clinical treatments.Methods Mimics,GeomagicStudio 2017,SolidWorks 2016,and Ansys workbench were used to establish finite element analysis models and perform mechanical analysis under the fol-lowing six working conditions:working condition 1 was the control group without miniscrews;working conditions 2 to 5 had miniscrew in the buccal bone cortex between the first and second molars of the lower jaw 10 mm,7 mm,4 mm,and 1 mm from the top of the alveolar crest,respectively;working condition 6 had the miniscrew in the center of the buccal tongue at the anterior edge of the ascending branch of the lower jaw 5 mm above the occlusal plane.Results On the sagittal axis,miniscrew anchorage caused distal displacement of all teeth.Compared to the control group,in the miniscrew group,the displacement of the anterior molars exceeded that of the second molars.On the vertical axis,the result in the control group was similar to backward bending;the results in the miniscrew groups resembled the effect of a lever,lowering the lateral incisors and canines and raising the central incisors and first premolars.On the coronal ax-is,the second premolars and the first molars showed lingual displacement in the control group,and only the premolars and first molars showed lingual displacementin the miniscrew groups.The canines were the teeth that were most strong-ly affected by the change in miniscrew placement height.Conclusion The higher the miniscrew position is,the stron-ger the protective effect on the anterior anchorage.According to the miniscrew placement height,the mandibular arch should be properly narrowed,the central incisors and first premolars should be lowered,and the lateral incisors and ca-nines should be raised when designing clinical treatments.