Objective: To investigate the effect of different surface treatment protocols on the surface properties and immediate shear bond strength (SBS) between 3D-printed zirconia and resin cement to provide a reference for clinical practice. Methods: Disc-shaped zirconia specimens (Ø 14 mm× 1.2 mm) with two different surface designs were fabricated using 3D printing technology: a smooth surface (Group S) and microporous surface (Group M), with 40 specimens in each group. Each group was further randomly divided into four subgroups according to surface treatment: untreated (Subgroup U), alumina sandblasting (Subgroup ST), alumina sandblasting + Z-Prime ceramic primer (Subgroup ZP), and alumina sandblasting + Monobond N ceramic primer (Subgroup MN). The surface morphology was examined, roughness was measured, and wettability was evaluated via contact-angle testing. Composite resin cylinders (Ø 3.5 mm× 2.0 mm) were bonded to the zirconia surfaces with resin cement. Immediate SBS was determined by shear testing, and failure modes were analyzed. Results: Scanning electron microscopy revealed clear micro-grooves (2-5 μm wide) in Subgroup S-U and micropores (approximately 400 μm in diameter) in Subgroup M-U. After sandblasting, the micro-grooves in Subgroup S-ST were partially destroyed with some micro-cracks, while the microporous structure in Subgroup M-ST remained clear. Compared with Subgroups S-U and M-U, sandblasted zirconia specimens (Subgroups S-ST, S-ZP, S-MN, M-ST, M-ZP, M-MN) showed significantly increased roughness and decreased contact angles. Different surface treatments significantly affected SBS between 3D-printed zirconia and resin. Sandblasted groups (Subgroups S-ST and M-ST) had significantly higher SBS than untreated groups (Subgroups S-U and M-U). The application of ceramic primers after sandblasting (Subgroups S-ZP, S-MN, M-ZP, M-MN) further increased SBS; however, there was no statistically significant difference in SBS between the two primers used after sandblasting (Subgroup S-ZP vs. S-MN, Subgroup M-ZP vs. M-MN). Under the same surface treatment, microporous surface groups (Subgroups M-U, M-ST, M-MN, M-ZP) all exhibited significantly higher SBS than smooth surface groups (Subgroups S-U, S-ST, S-MN, S-ZP). Conclusion Fabricating a microporous surface using 3D printing technology can improve resin bonding effectiveness. Sandblasting combined with a ceramic primer yields the highest immediate SBS.

Repeated transcranial magnetic stimulation (rTMS) is one of the commonly used brain stimulation techniques. In order to investigate the effects of rTMS on the excitability of different types of neurons, this study is conducted to investigate the effects of rTMS on the cognitive function of mice and the excitability of hippocampal glutaminergic neurons and gamma-aminobutyric neurons from the perspective of electrophysiology. In this study, mice were randomly divided into glutaminergic control group, glutaminergic magnetic stimulation group, gamma-aminobutyric acid energy control group, and gamma-aminobutyric acid magnetic stimulation group. The four groups of mice were injected with adeno-associated virus to label two types of neurons and were implanted optical fiber. The stimulation groups received 14 days of stimulation and the control groups received 14 days of pseudo-stimulation. The fluorescence intensity of calcium ions in mice was recorded by optical fiber system. Behavioral experiments were conducted to explore the changes of cognitive function in mice. The patch-clamp system was used to detect the changes of neuronal action potential characteristics. The results showed that rTMS significantly improved the cognitive function of mice, increased the amplitude of calcium fluorescence of glutamergic neurons and gamma-aminobutyric neurons in the hippocampus, and enhanced the action potential related indexes of glutamergic neurons and gamma-aminobutyric neurons. The results suggest that rTMS can improve the cognitive ability of mice by enhancing the excitability of hippocampal glutaminergic neurons and gamma-aminobutyric neurons.
Animals ; Mice ; Hippocampus/cytology* ; Transcranial Magnetic Stimulation ; Neurons/physiology* ; Male ; Cognition/physiology* ; gamma-Aminobutyric Acid/metabolism* ; Action Potentials/physiology*

Objective:To analyze the key points,deficiencies,and typical experience of the policy system for improving provincial primary Traditional Chinese Medicine(TCM)service capacity in China,so as to provide references for policy optimization.Methods:Top-level design documents related to the primary TCM service capacity improvement project in different provinces during the"14th Five-Year Plan"period were retrieved.The Latent Dirichlet Allocation(LDA)topic model model was used for thematic mining of policy texts,and the Policy Modeling Consistency(PMC)index model was constructed to analyze the common problems of various policies.Results:A total of 18 relevant policies were included,with an average PMC index of 5.52.Among the selected policies,10 were perfect policies,6 were excellent policies,and 2 were good policies,with no poor policies.The indicators of policy objects,policy objectives,and policy tools showed excellent performance,while the main problems were lack of supervision,insufficient interdepartmental coordination,and blind spots in policy content.Conclusion:In the"15th Five-Year Plan"period,the construction of TCM medical consortiums should be the main body to promote the expansion and sinking of high-quality TCM medical resources;the advantages of TCM in maintaining the full-life cycle health of the masses at the primary level should be valued;and internal and external policy coordination should be strengthened to form policy synergy and promote the high-quality development of primaiy TCM.

Objective To analyze the focus and shortcomings of provincial-level digitalization policies for Traditional Chinese Medicine(TCM),and to provide references for improving relevant policies.Methods A three-dimensional analytical framework—comprising"digitalization policy coverage-economic level-TCM development level"was constructed to quantitatively analyze provincial TCM digitalization policy documents issued over the past five years.Results A total of 750 policy items were extracted.Among them,digital applications accounted for the largest proportion(58.13%),while digital governance(26.53%)and digital infrastructure(15.33%)were relatively less emphasized.Two-dimensional analysis revealed that 48.4%of provinces had both low economic levels and low digital policy coverage,while 45.2%had both low TCM development levels and low policy coverage.Multiple linear regression result showed a positive association between digitalization policies coverage and TCM development level,with no significant correlation to economic level.Conclusion Most provincial TCM digitalization policies prioritize application while neglecting governance and infrastructure.There is a need to strengthen talent development and standard system construction,The extent of policy coverage is closely related to the level of TCM development,indicating the need to enhance top-level policy design,Provincial policies vary in focus and can be categorized into three types:industry-driven,technology-driven,and demand-driven.

Objective To analyze the focus and shortcomings of provincial-level digitalization policies for Traditional Chinese Medicine(TCM),and to provide references for improving relevant policies.Methods A three-dimensional analytical framework—comprising"digitalization policy coverage-economic level-TCM development level"was constructed to quantitatively analyze provincial TCM digitalization policy documents issued over the past five years.Results A total of 750 policy items were extracted.Among them,digital applications accounted for the largest proportion(58.13%),while digital governance(26.53%)and digital infrastructure(15.33%)were relatively less emphasized.Two-dimensional analysis revealed that 48.4%of provinces had both low economic levels and low digital policy coverage,while 45.2%had both low TCM development levels and low policy coverage.Multiple linear regression result showed a positive association between digitalization policies coverage and TCM development level,with no significant correlation to economic level.Conclusion Most provincial TCM digitalization policies prioritize application while neglecting governance and infrastructure.There is a need to strengthen talent development and standard system construction,The extent of policy coverage is closely related to the level of TCM development,indicating the need to enhance top-level policy design,Provincial policies vary in focus and can be categorized into three types:industry-driven,technology-driven,and demand-driven.

Objective:To analyze the key points,deficiencies,and typical experience of the policy system for improving provincial primary Traditional Chinese Medicine(TCM)service capacity in China,so as to provide references for policy optimization.Methods:Top-level design documents related to the primary TCM service capacity improvement project in different provinces during the"14th Five-Year Plan"period were retrieved.The Latent Dirichlet Allocation(LDA)topic model model was used for thematic mining of policy texts,and the Policy Modeling Consistency(PMC)index model was constructed to analyze the common problems of various policies.Results:A total of 18 relevant policies were included,with an average PMC index of 5.52.Among the selected policies,10 were perfect policies,6 were excellent policies,and 2 were good policies,with no poor policies.The indicators of policy objects,policy objectives,and policy tools showed excellent performance,while the main problems were lack of supervision,insufficient interdepartmental coordination,and blind spots in policy content.Conclusion:In the"15th Five-Year Plan"period,the construction of TCM medical consortiums should be the main body to promote the expansion and sinking of high-quality TCM medical resources;the advantages of TCM in maintaining the full-life cycle health of the masses at the primary level should be valued;and internal and external policy coordination should be strengthened to form policy synergy and promote the high-quality development of primaiy TCM.

Objective:To explore the evaluation effect of ultrasonography and Pirani score on tarsal deformity, treatment effect and pseudo-correction of congenital clubfoot in infants and young children, and the correlation between the two methods.Methods:This is a retrospective case series study. The clinical data of 26 children (40 feet) with congenital clubfoot who were evaluated by ultrasonography in the Third Affiliated Hospital of Zhengzhou University from January 2020 to January 2023 were retrospectively collected. There were 16 males and 10 females. The age at the first ultrasound examination was ( M(IQR)) 9.0 (18.0) days (range: 1 to 46 days). All patients were treated with Ponseti method by the same physician. The Pirani scores before and after treatment and at the last examination, and the talonavicular angle, calcaneocuboid angle and tibiocalcaneal angle measured by ultrasound were collected, and the treatment and follow-up were recorded. Paired sample t test, repeated measures analysis of variance or Kruskal-Wallis test were used for data comparison, and Spearman correlation analysis was used for correlation analysis. The receiver operating characteristic curve was used to calculate the efficacy of ultrasound in evaluating different Pirani scores. Results:The number of plaster fixation in 26 children was 4.0 (1.0) times (range: 2 to 8 times). The medial talonavicular angle and posterior tibiocalcaneal angle were significantly improved after treatment and at the last follow-up compared with those before treatment, and the differences were statistically significant (all P<0.01). There was no difference in lateral calcaneocuboid angle before and after treatment and at the last follow-up ( F=1.971, P>0.05). Pseudo-correction occurred in 2 cases (2 feet) during the treatment, with an incidence of 5%. Correlation analysis showed that there was a moderate positive correlation between talonavicular angle and Pirani midfoot score ( r=0.480, P<0.01). There was no correlation between calcaneocuboid angle and Pirani midfoot score ( r=0.114, P=0.105). There was a moderate negative correlation between tibial heel angle and Pirani hindfoot score ( r=-0.566, P<0.01). The cut-off point of Pirani midfoot score of 1.5 was 38.78°, the sensitivity was 0.90, the specificity was 0.56, and the area under the curve was 0.75. The cut-off value of angle was 27.51 °, the sensitivity was 0.16, the specificity was 0.92, and the area under the curve was 0.44.The cut-off points of Pirani midfoot score of 3.0 were 45.08°and 9.96°, the sensitivity was 0.94 and 0.91, the specificity was 0.37 and 0.42, and the area under the curve was 0.59 and 0.62, respectively. The cut-off values of Pirani hindfoot score of 2.0 and 3.0 were 167.46° and 160.15°, respectively. The sensitivity was 0.75 and 0.67, the specificity was 0.81 and 0.83, and the area under the curve was 0.78 and 0.71, respectively. Conclusion:Ultrasound can complement with Pirani score, visually and dynamically observe the morphology and position changes of talonavicular joint, calcaneocuboid joint and tibiotalocalcaneal joint, monitor the recovery and pseudo-correction of tarsal bones, and better evaluate the therapeutic effect.

The treatment of bone defects caused by fractures or bone tissue lesions has always been a difficult problem in the field of orthopedics.Implantation of high-performance titanium alloy prosthesis is an effective method to treat bone defects.3D printing technology can produce low-modulus titanium alloy implants with porous structures,providing a better solution to the above problems.This technology is convenient to design and has a huge advantage in making orthopedic implants.The article used electron beam melting in 3D printing technology to create two samples of Ti-6Al-4V prosthesis,including solid structural pelvic prosthesis and porous structural pelvic prosthesis.The mechanical properties of the prosthesis showed that the yield and tensile strengths of the rod tensile specimen were 894 MPa and 956 MPa,respectively,and the compressive modulus and compressive strength of the porous pelvic prosthesis were 55 GPa and 65.2 MPa,respectively.The results of the L929 cytotoxicity assay and the MC3T3-E1 cell adhesion assay demonstrated good biocompatibility of the prosthetic samples.New Zealand white rabbits were used to prepare the femoral joint cavity defect models and two pelvic prostheses were implanted.A microscopic CT scan 4 weeks after implantation showed that the bone defect caused by the drill had healed and that the porous structure of the pelvic prosthesis formed a new trabecular structure within the hole.In conclusion,the 3D printed Ti-6Al-4V pelvic prosthesis has excellent mechanical properties,biocompatibility,and the ability to promote new bone growth.

Objective:To explore the evaluation effect of ultrasonography and Pirani score on tarsal deformity, treatment effect and pseudo-correction of congenital clubfoot in infants and young children, and the correlation between the two methods.Methods:This is a retrospective case series study. The clinical data of 26 children (40 feet) with congenital clubfoot who were evaluated by ultrasonography in the Third Affiliated Hospital of Zhengzhou University from January 2020 to January 2023 were retrospectively collected. There were 16 males and 10 females. The age at the first ultrasound examination was ( M(IQR)) 9.0 (18.0) days (range: 1 to 46 days). All patients were treated with Ponseti method by the same physician. The Pirani scores before and after treatment and at the last examination, and the talonavicular angle, calcaneocuboid angle and tibiocalcaneal angle measured by ultrasound were collected, and the treatment and follow-up were recorded. Paired sample t test, repeated measures analysis of variance or Kruskal-Wallis test were used for data comparison, and Spearman correlation analysis was used for correlation analysis. The receiver operating characteristic curve was used to calculate the efficacy of ultrasound in evaluating different Pirani scores. Results:The number of plaster fixation in 26 children was 4.0 (1.0) times (range: 2 to 8 times). The medial talonavicular angle and posterior tibiocalcaneal angle were significantly improved after treatment and at the last follow-up compared with those before treatment, and the differences were statistically significant (all P<0.01). There was no difference in lateral calcaneocuboid angle before and after treatment and at the last follow-up ( F=1.971, P>0.05). Pseudo-correction occurred in 2 cases (2 feet) during the treatment, with an incidence of 5%. Correlation analysis showed that there was a moderate positive correlation between talonavicular angle and Pirani midfoot score ( r=0.480, P<0.01). There was no correlation between calcaneocuboid angle and Pirani midfoot score ( r=0.114, P=0.105). There was a moderate negative correlation between tibial heel angle and Pirani hindfoot score ( r=-0.566, P<0.01). The cut-off point of Pirani midfoot score of 1.5 was 38.78°, the sensitivity was 0.90, the specificity was 0.56, and the area under the curve was 0.75. The cut-off value of angle was 27.51 °, the sensitivity was 0.16, the specificity was 0.92, and the area under the curve was 0.44.The cut-off points of Pirani midfoot score of 3.0 were 45.08°and 9.96°, the sensitivity was 0.94 and 0.91, the specificity was 0.37 and 0.42, and the area under the curve was 0.59 and 0.62, respectively. The cut-off values of Pirani hindfoot score of 2.0 and 3.0 were 167.46° and 160.15°, respectively. The sensitivity was 0.75 and 0.67, the specificity was 0.81 and 0.83, and the area under the curve was 0.78 and 0.71, respectively. Conclusion:Ultrasound can complement with Pirani score, visually and dynamically observe the morphology and position changes of talonavicular joint, calcaneocuboid joint and tibiotalocalcaneal joint, monitor the recovery and pseudo-correction of tarsal bones, and better evaluate the therapeutic effect.

Objective·To explore the correlation among perceived social support,rehabilitation self-efficacy and rehabilitation exercise adherence of in-patients after hip/knee arthroplasty,and examine the mediating role of rehabilitation self-efficacy in the correlation between perceived social support and rehabilitation exercise adherence.Methods·A convenience sampling method was used,and 141 post-total hip/knee arthroplasty inpatients in the bone and joint ward of the First Affiliated Hospital of Naval Medical University(Shanghai Changhai Hospital)from October 2021 to February 2023 were selected as the study subjects.The general demographic data,such as age and gender,and the information of disease and operation were assessed by using General Data Questionnaire.The adherence to rehabilitation exercise in patients after hip/knee arthroplasty was assessed by using the Rehabilitation Exercise Adherence Scale(REAS);the self-efficacy of rehabilitation exercise was assessed by using the Self-Efficacy for Rehabilitation Outcome Scale(SER);the social support level of individual subjective feelings of the patients was assessed by using the Perceived Social Support Scale(PSSS).Pearson's correlation analysis was used to test the correlation between the variables,and Bootstrap method was used to investigate the mediating role of rehabilitation self-efficacy in the correlation between perceived social support and rehabilitation exercise adherence.Results·A total of 167 questionnaires were distributed and 141 valid questionnaires were recovered,with a valid recovery rate of 84.4%.The age range of the 141 patients after hip/knee arthroplasty was 26?84 years old,and the average age was(64.75±10.74)years old.The total score of SER of the patients after hip/knee arthroplasty was(100.45±21.71),the total score of PSSS was(68.29±10.89),and the total score of REAS was(11.93±2.29).Pearson's correlation analysis results showed that there was a significant correlation between SER score and PSSS score,SER score and REAS score,and PSSS score and REAS score in patients after hip/knee arthroplasty.The mediation effect analysis showed that the indirect effect of perceived social support on rehabilitation exercise adherence was significant(effect value 0.033,95%CI 0.017?0.058,P<0.05),and the direct effect of perceived social support on rehabilitation exercise adherence was not significant(effect value 0.027,95%CI-0.008 ? 0.065,P>0.05).Conclusion·Perceived social support positively predicts rehabilitation exercise adherence,and rehabilitation self-efficacy fully mediates the correlation.Direct intervention in rehabilitation self-efficacy is superior to moderating the level of perceived social support.