Donors with a serum sodium concentration of >155 mmol/L are extended criteria donors for liver transplantation (LT). Elevated serum sodium of donors leads to an increased incidence of hepatic dysfunction in the early postoperative period of LT; however, the exact mechanism has not been reported. We constructed a Lewis rat model of 70% hepatic parenchymal area subjected to ischemia-reperfusion (I/R) with hypernatremia and a BRL-3A cell model of hypoxia-reoxygenation (H/R) with high-sodium (HS) culture medium precondition. To determine the degree of injury, biochemical analysis, histological analysis, and oxidative stress and apoptosis detection were performed. We applied specific inhibitors of the epithelial sodium channel (ENaC) and Na⁺/Ca²⁺ exchanger (NCX) in vivo and in vitro to verify their roles in injury. Serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), and lactate dehydrogenase (LDH) levels and the area of hepatic necrosis were significantly elevated in the HS+I/R group. Increased reactive oxygen species (ROS) production, myeloperoxidase (MPO)‍-positive cells, and aggravated cellular apoptosis were detected in the HS+I/R group. The HS+H/R group of BRL-3A cells showed significantly increased cellular apoptosis and ROS production compared to the H/R group. The application of amiloride (Amil), a specific inhibitor of ENaC, reduced ischemia-reperfusion injury (IRI) aggravated by HS both in vivo and in vitro, as evidenced by decreased serum transaminases, inflammatory cytokines, apoptosis, and oxidative stress. SN-6, a specific inhibitor of NCX, had a similar effect to Amil. In summary, hypernatremia aggravates hepatic IRI, which can be attenuated by pharmacological inhibition of ENaC or NCX.
Animals ; Reperfusion Injury/drug therapy* ; Hypernatremia/complications* ; Rats ; Liver/metabolism* ; Rats, Inbred Lew ; Male ; Apoptosis ; Sodium-Calcium Exchanger/antagonists & inhibitors* ; Reactive Oxygen Species/metabolism* ; Oxidative Stress ; Epithelial Sodium Channel Blockers/pharmacology* ; Epithelial Sodium Channels ; Cell Line ; Liver Transplantation

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Combined vaccines can simplify the vaccination process, improve coverage rates, reduce the risk of adverse events following immunization, lower social costs, and improve the timeliness of childhood vaccination. This article focuses on multi-component vaccines based on the diphtheria-tetanus-pertussis containing vaccine. Globally, multiple combined vaccines have been developed and marketed, but the development of combined vaccine is still in its infancy stage in China, with limited vaccine types and doses available. The research, development, and application of combined vaccines still face numerous challenges in China, including technical challenges in research and development, as well as insufficient motivation for research and development. Additionally, the high cost of existing combined vaccines, coupled with low public awareness and weak vaccination intentions, significantly hinders their widespread application, China should continue to rigorously implement the Vaccine Administration Law of the People's Republic of China, promote innovative development of combined vaccines, increase public awareness, strengthen child guardians' confidence in vaccination, and improve the accessibility and affordability of combined vaccines to protect public health across all life stages.

The health and well-being of the elderly have become a focal point for all sectors of society. As an effective means of preventing and controlling infectious diseases, vaccination plays a critical role in safeguarding human health. For older adults, timely and scientifically guided vaccination can significantly reduce the risk of serious illnesses while alleviating the associated economic burdens and pressure imposed on society. However, in practice, deficiencies in policy support, accessibility of vaccination services, and public awareness hinder some elderly individuals from fully benefiting from the protective effects of vaccines. This paper analyzes current vaccination practices for the elderly globally and proposes strategies to improve vaccination coverage, providing a scientific basis for advancing effective vaccination initiatives for this demographic in China.

As an important setting for the administration of vaccinations, the reasonable setting up and standardized management of vaccination clinics will enhance immunization service quality, public satisfaction, and improve the vaccination rate to protect people′s health. In recent years, various provinces in China are continuously promoting the standardized construction and management of vaccination clinics. However, the level of standardization management remains unbalanced, and the capacity of vaccination services needs to be further improved. This paper reviews the standardized management process of vaccination clinics, summarizes the practice and achievements in various regions, and analyzes the challenges and issues during these processes, to provide reference for improving the standardized management level of vaccination clinics in the future.

Vaccination has become one of the key public health interventions for reducing child mortality. With the implementation of the expanded programme on immunization, the number of vaccine types children need to receive is increasing, necessitating further optimization of childhood immunization strategies. The World Health Organization recommends simultaneous vaccination as one of the core strategies for optimizing childhood immunization schedules. This article analyzes the current status, challenges, and prospects of simultaneous vaccination strategies for children in China, aiming to provide a scientific basis for promoting and implementing strategies for the simultaneous administration of multiple vaccines to children.

Objective:To evaluate the therapeutic role of balanced matching concept in the surgical release of moderate and severe elbow stiffness after trauma.Methods:A retrospective study was conducted to analyze the clinical data of 20 patients who had been treated by surgical release from June 2022 to January 2024 for elbow stiffness after moderate and severe trauma at Department of Orthopedic Trauma, The First Hospital Affiliated to Air Force Medical University of PLA using the balanced matching concept (combination of elbow soft tissue balance and bone matching). There were 15 males and 5 females, with an age of (33.0±8.9) years. Six left sides and 14 right sides were affected. The elbow stiffness was severe in 13 cases and moderate in 7 cases. Six patients had mainly bony stiffness, 4 patients mainly soft stiffness, and 10 patients mixed stiffness. The elbow flexion and extension, Mayo elbow performance score (MEPS) and disabilities of the arm, shoulder, and hand (DASH) score were recorded and compared before release and at the last follow-up. The recurrence of ectopic ossification, infection, iatrogenic fracture and other complications of the elbow joint of the affected limb were recorded.Results:All the 20 patients were followed up for (16.6±3.5) months. At the last follow-up, the elbow flexion and extension (121.8°±8.9° and 14.8°±8.2°) were significantly greater than those before operation (73.5°±25.7° and 47.3°±19.2°), and the MEPS and DASH scores [ (90.0±5.6) points, (5.6±3.0) points] were significantly better than those before operation [(53.0±12.8) points, (62.1±14.0) points] ( P<0.05). Iatrogenic fracture of the ulna occurred in 1 patient, and pinky numbness occurred in 1 patient after surgery. None of the patients had recurrence of ectopic ossification or wound infection. Conclusion:In the surgical release of moderate and severe elbow stiffness after trauma, the concept of balanced matching plays a positive role by facilitating the functional restoration of the elbow and reducing the incidence of complications.

Objective To construct a Framingham risk score(FRS)tool for predicting poor prognosis after mechanical thrombec-tomy(MT)in patients with middle cerebral artery(MCA)acute ischemic stroke(AIS)based on logistic regression model.Methods A retrospective analysis was conducted on the imaging and clinical data of 126 patients with MCA-AIS.Categorical data were com-pared between groups using the chi-square test or continuity-corrected chi-square test,while normally distributed continuous data were analyzed using the independent samples t-test.Multivariate logistic regression analysis was used to screen the risk factors for poor prognosis after MT in patients with MCA-AIS.The Framingham risk assessment model was used to establish a FRS tool for poor prognosis after MT in patients with MCA-AIS.Results The independent risk factors for poor prognosis after MT in patients with MCA-AIS were the Alberta stroke program early CT score(ASPECTS)before the operation,the baseline National Institute of Health Stroke Scale(NIHSS)score,and the time from femoral artery puncture to recanalization.The FRS tool ranges from-7 to 12 points,with a risk prediction rate of 0.044 7 to 0.970 1.Conclusion The FRS tool can calculate the risk probability of poor prognosis sim-ply and quickly,and has high predictive value for the prognosis after MT in MCA-AIS patients.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Combined vaccines can simplify the vaccination process, improve coverage rates, reduce the risk of adverse events following immunization, lower social costs, and improve the timeliness of childhood vaccination. This article focuses on multi-component vaccines based on the diphtheria-tetanus-pertussis containing vaccine. Globally, multiple combined vaccines have been developed and marketed, but the development of combined vaccine is still in its infancy stage in China, with limited vaccine types and doses available. The research, development, and application of combined vaccines still face numerous challenges in China, including technical challenges in research and development, as well as insufficient motivation for research and development. Additionally, the high cost of existing combined vaccines, coupled with low public awareness and weak vaccination intentions, significantly hinders their widespread application, China should continue to rigorously implement the Vaccine Administration Law of the People's Republic of China, promote innovative development of combined vaccines, increase public awareness, strengthen child guardians' confidence in vaccination, and improve the accessibility and affordability of combined vaccines to protect public health across all life stages.