Objective To verify the safety and effectiveness of a new percutaneous controllable curved plasma radiofrequency instrument for nucleus pulposus ablation. Methods A new percutaneous controllable curved plasma radiofrequency instrument were designed (controllable curved group), and its ablation effect was compared with the currently used straight head non-bendable plasma ablation instrument (non-bendable group) on gross specimens. The ablation instrument was placed through the right intervertebral foramen, and continuous ablation on the same intervertebral disc was conducted for three times. The ablation range and trajectory were recorded, and the temperature changes in the front, back, left, and right of the ablation center during and 15 seconds after ablation were monitored by the inserted temperature probe. Results There were no difference in temperature changes in the front, back, right regions of the ablation center during and 15 seconds after ablation between the two groups. The temperature changes in the left region of the ablation center both during and 15 seconds after 3rd ablation were larger than those in the non-bendable group (P＜0.01). Compared with the non-bendable group, the controllable curved group achieved angle control and larger single ablation area (2.282 5 mm² vs 1.135 8 mm², P＜0.000 1). Conclusions This new percutaneous controllable curved plasma ablation instrument can achieve angle control and ablation on the side opposite to the puncture site, increase ablation volume, and is safe.

Prostate cancer is the second most common cancer in men, accounting for 14.1% of new cancer cases in 2020. The aggressiveness of prostate cancer is highly variable, depending on its grade and stage at the time of diagnosis. Despite recent advances in prostate cancer treatment, some patients still experience recurrence or even progression after undergoing radical treatment. Accurate initial staging and monitoring for recurrence determine patient management, which in turn affect patient prognosis and survival. Classical imaging has limitations in the diagnosis and treatment of prostate cancer, but the use of novel molecular probes has improved the detection rate, specificity, and accuracy of prostate cancer detection. Molecular probe-based imaging modalities allow the visualization and quantitative measurement of biological processes at the molecular and cellular levels in living systems. An increased understanding of tumor biology of prostate cancer and the discovery of new tumor biomarkers have allowed the exploration of additional molecular probe targets. The development of novel ligands and advances in nano-based delivery technologies have accelerated the research and development of molecular probes. Here, we summarize the use of molecular probes in positron emission tomography (PET), single-photon emission computed tomography (SPECT), magnetic resonance imaging (MRI), optical imaging, and ultrasound imaging, and provide a brief overview of important target molecules in prostate cancer.
Humans ; Male ; Prostatic Neoplasms/diagnosis* ; Molecular Probes ; Molecular Imaging/methods* ; Magnetic Resonance Imaging ; Positron-Emission Tomography ; Tomography, Emission-Computed, Single-Photon ; Ultrasonography ; Optical Imaging ; Biomarkers, Tumor ; Precision Medicine/methods*

Healthy lifestyles and good living habits are effective strategies and important approaches to prevent chronic non-communicable diseases. With the development of evidence-based medicine, the evidence translation system has made some achievements in clinical practice. There is, however, no comprehensive, professional and efficient system for translating lifestyle evidence globally. Therefore, the Health Lifestyle Evidence (HLSE) Group of Lanzhou University constructed the HLSE Evidence Translation System (https://hlse.cn/), with the aim of synthesizing, evaluating, translating, and applying lifestyle-related evidence resources. This paper aims to introduce the functional module design of the evidence translation system, the system development process and testing, introduce the interface design and function demonstration, and explain the significance of constructing the HLSE.

To systematically construct a guideline to provide a methodological guide for researchers to develop patient decision aids.

Healthy lifestyles and good living habits are effective strategies and important approaches to prevent chronic non-communicable diseases. With the development of evidence-based medicine, the evidence translation system has made some achievements in clinical practice. There is, however, no comprehensive, professional and efficient system for translating lifestyle evidence globally. Therefore, the Health Lifestyle Evidence (HLSE) Group of Lanzhou University constructed the HLSE Evidence Translation System (https://hlse.cn/), with the aim of synthesizing, evaluating, translating, and applying lifestyle-related evidence resources. This paper aims to introduce the functional module design of the evidence translation system, the system development process and testing, introduce the interface design and function demonstration, and explain the significance of constructing the HLSE.

To systematically construct a guideline to provide a methodological guide for researchers to develop patient decision aids.

Objective To evaluate the clinical efficacy,safety and the postoperative functional improvement of the surgical treatment for postpartum diastasis recti(PDR).Methods A retrospective study was conducted on the patients with PDR who underwent surgical treatment in Department of Hernia and Abdominal Wall Surgery,Shanghai East Hospital,Tongji University from November 2018 to October 2023.The patients'demography,operation data,postoperative complications,recurrence and functional evaluation before and after surgery were analyzed.Results A total of 39 cases were included.Open surgery was performed in 21 cases,laparoscopic surgery in 17 cases,and hybrid surgery in 1 case.On the basis of linear alba reconstruction(LAR),26 cases were additionally repaired with Sublay mesh,9 with Onlay,and 1 with intraperitoneal onlay mesh(IPOM);the other 3 cases were only performed with LAR.The follow-up ranged 6-45 months,and the completion rate was 92.3%.During the follow-up,no recurrence was observed,and the overall complication rate was 20.5%,including 1 case with delayed wound healing,2 cases with seroma,and 5 cases with skin disorders in paraumbilical and subumbilical area.There were significant changes of European Registry for abdominal wall hernias quality of life(EuraHS QoL)score and Oswestry disability index(ODI)after operation,indicating significant improvement in QoL and lower back pain.The inter-recti distance(IRD)of the patients undergoing laparoscopic surgery was less than that of the patients undergoing open surgery(median 4.0 cm vs.4.5 cm),and the duration of hospital stay of the patients undergoing laparoscopic surgery was shorter than that of open surgery(median 7 days vs.9 days).Conclusions In general,the surgical treatment of PDR is safe and effective,and it can not only correct the separation,but also improve QoL and lower back pain of the patients.Tailored surgical procedures should be selected for patients with different conditions.

Objective:To evaluate the feasibility of using cortical bone trajectory (CBT) screws in the osteoporotic thoracolumbar fixation by comparing the bone CT values at the bone-screw interface between traditional trajectory (TT) screws and CBT screws in patients with different bone densities.Methods:The high-resolution CT imaging data of thoracolumbar segments following thoracic or lumbar spine fractures from April 2020 to October 2022 were collected at The Second Hospital Affiliated to Wenzhou Medical University for retrospective analysis. They were divided into 3 groups: a normal bone mass group, an osteopenia group and an osteoporosis group. From each group 30 cases were chosen (90 cases in total, 36 males and 54 females). All the data were imported into Mimics 18.0 for three-dimensional bone reconstruction in which placement of TT and CBT screws was simulated on the vertebrae from T10 to L2 (non-fractured vertebrae). Regions of interest (ROI) where each simulated screw intersected the bone were segmented to measure their CT bone values. For each vertebra in each group, the relative difference percentage in average CT value of ROI between TT and CBT screws was calculated. The CT values of ROI were compared in the same group between TT and CBT screws from T10 to L2; the CT values of ROI were compared in the same screws among the 3 groups from T10 to L2; the CT values of ROI were compared between the CBT screws in the osteopenia and osteoporosis groups and the TT screws in the normal bone mass group; the relative difference percentages in average CT value of ROI between CBT and TT screws were compared between the 3 groups from T10 to L2.Results:The average CT value of ROI for CBT screws was significantly higher than that for TT screws from T10 to L2 in every group ( P< 0.001); as for the CT values of ROI for CBT and TT screws from T10 to L2, the osteoporosis group0.05). At T10, T12, and L1, the relative difference percentage in average CT value of ROI between CBT and TT screws was significantly higher in the osteopenia and osteoporosis groups than that in the normal bone mass group ( P<0.05), but there was no such a difference between the osteopenia and the osteoporosis groups ( P>0.05). At T11 and L2, there was no significant difference between the 3 groups in the relative difference percentage in average CT value of ROI between CBT and TT screws ( P>0.05). Conclusions:As bone mass decreases, both CBT and TT screws lead to a significant decrease in the bone density at the bone-screw interface. In patients with osteoporosis, CBT screws can still lead to a higher bone density at the bone-screw interface than TT screws, thus providing a higher strength at the bone-screw interface.

Artificial intelligence(AI) empowers the development of the medical industry, providing precise and intelligent assistance for clinical diagnosis, treatment, and rehabilitation.AI has the potential to facilitate shared decision making (SDM), but AI interventions used for SDM are currently in their infancy, presenting both challenges and opportunities. This paper aims to describe the application of AI in SDM, explore the problems and challenges of AI-based decision aid used for SDM, and propose possible solutions, aiming to provide a guide for the development and implementation of AI-based decision aid.

Background Children and adolescents drink sugar-sweetened beverages (SSBs) frequently. Research has confirmed that SSBs associate with weight gain and overweight or obesity. However, it is unclear whether high SSBs intake associates with abnormal changes in physical growth and glucolipid metabolism before causing adverse health outcomes such as overweight and obesity. Early identification of associated health risks of overconsumption of SSBs have important public health implications. Objective To investigate the differences in physical growth and glucolipid metabolism between different SSBs intake frequency groups in normal weight children and adolescents aged 6-17 years, and to evaluate the early effects of SSBs intake on physical growth and glycolipid metabolism before causing overweight and obesity, aiming to provide a scientific basis for the prevention and control of childhood overweight and obesity and related chronic diseases, and for the formulation of policies on the control of SSBs consumption. Methods Data were from the Shanghai Diet and Health Survey (SDHS) among primary and secondary school students. The participants were normal weight children and adolescents aged 6-17 years. Propensity scores were calculated according to energy intake and physical activity factors, after stratifying by age and gender. Participants were 1:1 matched with the closest propensity scores in the high-frequency (≥1 time·d⁻¹) and the low-frequency (≤1 time·week⁻¹) SSBs intake groups. The outcome indicators were physical measurements such as height, weight, percent of body fat, and waist circumference, and metabolic indicators such as fasting blood glucose, total triglycerides, total cholesterol, low-density lipoprotein cholesterol, and high-density lipoprotein cholesterol. Body mass index (BMI) was calculated. Food frequency questionnaire was used to collect SSBs consumption in the past three months through face-to-face interview. A paired t-test was used to compare the differences in physical and glycolipid metabolic indicators between the high-frequency intake group and the low-frequency intake group of SSBs. Results A total of 431 pairs were obtained. For children and adolescents in grades 6-9, overall height (difference=2.92 cm, P=0.002), weight (difference=2.53 kg, P=0.003), and waist circumference (difference=1.34 cm, P=0.035) were higher in those who consumed SSBs ≥1 time·d⁻¹ than in those who consumed ≤1 time·week⁻¹. For children and adolescents in grades 10-12, overall weight (difference=2.27 kg, P=0.041) was higher in those who consumed SSBs ≥1 time·d⁻¹ than in those who consumed ≤1 time·week⁻¹. Over 95% of the study subjects reported blood glucose and lipid test results within the normal range; but girls in grades 1-5 who consumed SSBs ≥1 time·d⁻¹ had a higher total cholesterol (difference=0.20 mmol·L⁻¹, P=0.027) and low-density lipoprotein cholesterol (difference=0.19 mmol·L⁻¹, P=0.010) than those who consumed ≤1 time·week⁻¹; boys in grades 6-9 who consumed SSBs ≥1 time·d⁻¹ had a lower high-density lipoprotein cholesterol (difference=-0.10 mmol·L⁻¹, P=0.039) than those who consumed ≤1 time·week⁻¹. Conclusion High-frequency intake of SSBs may be associated with higher total cholesterol and low-density lipoprotein cholesterol in normal weight children and adolescents in grades 1-5, and higher weight in normal weight children and adolescents in grades 6-12. There is an urgent need to educate children and adolescents about nutritional health, enhance their ability to make healthy food and beverage choices, and take early interventions to control the intake of SSBs in children.