Objective To examine the changing prevalence and antimicrobial resistance profiles of Burkholderia cepacia in 52 hospitals across China from 2015 to 2021.Methods A total of 9 261 strains of B.cepacia were collected from 52 hospitals between January 1,2015 and December 31,2021.Antimicrobial susceptibility of the strains was tested using Kirby-Bauer method or automated antimicrobial susceptibility testing systems according to a unified protocol.The results were interpreted according to the breakpoints released in the Clinical & Laboratory Standards Institute(CLSI)guidelines(2023 edition).Results A total of 9 261 strains of B.cepacia were isolated from all age groups,especially elderly patients.The proportion was 11.1％(1 032 strains)in children,significantly lower than the proportion in adults.About half(46.5％,4 310/9 261)of the strains were isolated from patients at least 60 years old and 42.3％(3 919/9 261)of the strains were isolated from young adults.Most isolates(71.1％)were isolated from sputum and respiratory secretions,followed by urine(10.7％)and blood samples(8.1％).B.cepacia isolates were highly susceptible to the five antimicrobial agents recommended in the CLSI M100 document(33rd edition,2023).B.cepacia isolates showed relatively higher resistance rates to meropenem and levofloxacin.However,the resistance rates to ceftazidime,trimethoprim-sulfamethoxazole,and minocycline remained below 8.1％.The percentage of B.cepacia strains resistant to levofloxacin was the highest compared to other antibiotics in any of the three age groups(from 12.4％in the patients＜18 years old to 20.6％in the patients aged 60 years or older).Conclusions B.cepacia is one of the clinically important non-fermenting gram-negative bacteria.Accurate and timely reporting of antimicrobial susceptibility test results and ongoing antimicrobial resistance surveillance are helpful for rational prescription of antimicrobial agents and proper prevention and control of nosocomial infections.

Objective To summarize the changing prevalence of carbapenem resistance in Enterobacterales based on the data of CHINET Antimicrobial Resistance Surveillance Program from 2015 to 2021 for improving antimicrobial treatment in clinical practice.Methods Antimicrobial susceptibility testing was performed using a commercial automated susceptibility testing system according to the unified CHINET protocol.The results were interpreted according to the breakpoints of the Clinical & Laboratory Standards Institute(CLSI)M100 31st ed in 2021.Results Over the seven-year period(2015-2021),the overall prevalence of carbapenem-resistant Enterobacterales(CRE)was 9.43％(62 342/661 235).The prevalence of CRE strains in Klebsiella pneumoniae,Citrobacter freundii,and Enterobacter cloacae was 22.38％,9.73％,and 8.47％,respectively.The prevalence of CRE strains in Escherichia coli was 1.99％.A few CRE strains were also identified in Salmonella and Shigella.The CRE strains were mainly isolated from respiratory specimens(44.23±2.80)％,followed by blood(20.88±3.40)％and urine(18.40±3.45)％.Intensive care units(ICUs)were the major source of the CRE strains(27.43±5.20)％.CRE strains were resistant to all the β-lactam antibiotics tested and most non-β-lactam antimicrobial agents.The CRE strains were relatively susceptible to tigecycline and polymyxins with low resistance rates.Conclusions The prevalence of CRE strains was increasing from 2015 to 2021.CRE strains were highly resistant to most of the antibacterial drugs used in clinical practice.Clinicians should prescribe antimicrobial agents rationally.Hospitals should strengthen antibiotic stewardship in key clinical settings such as ICUs,and take effective infection control measures to curb CRE outbreak and epidemic in hospitals.

Objective To characterize the changing species distribution and antibiotic resistance profiles of respiratory isolates in hospitals participating in the CHINET Antimicrobial Resistance Surveillance Program from 2015 to 2021.Methods Commercial automated antimicrobial susceptibility testing systems and disk diffusion method were used to test the susceptibility of respiratory bacterial isolates to antimicrobial agents following the standardized technical protocol established by the CHINET program.Results A total of 589 746 respiratory isolates were collected from 2015 to 2021.Overall,82.6％of the isolates were Gram-negative bacteria and 17.4％were Gram-positive bacteria.The bacterial isolates from outpatients and inpatients accounted for(6.0±0.9)％and(94.0±0.1)％,respectively.The top microorganisms were Klebsiella spp.,Acinetobacter spp.,Pseudomonas aeruginosa,Staphylococcus aureus,Haemophilus spp.,Stenotrophomonas maltophilia,Escherichia coli,and Streptococcus pneumoniae.Each microorganism was isolated from significantly more males than from females(P＜0.05).The overall prevalence of methicillin-resistant S.aureus(MRSA)was 39.9％.The prevalence of penicillin-resistant S.pneumoniae was 1.4％.The prevalence of extended-spectrum β-lactamase(ESBL)-producing E.coli and K.pneumoniae was 67.8％and 41.3％,respectively.The overall prevalence of carbapenem-resistant E.coli,K.pneumoniae,Enterobacter cloacae,Pseudomonas aeruginosa,and Acinetobacter baumannii was 3.7％,20.8％,9.4％,29.8％,and 73.3％,respectively.The prevalence of β-lactamase was 96.1％in Moraxella catarrhalis and 60.0％in Haemophilus influenzae.The H.influenzae isolates from children(＜18 years)showed significantly higher resistance rates to β-lactam antibiotics than the isolates from adults(P＜0.05).Conclusions Gram-negative bacteria are still predominant in respiratory isolates associated with serious antibiotic resistance.Antimicrobial resistance surveillance should be strengthened in clinical practice to support accurate etiological diagnosis and appropriate antimicrobial therapy based on antimicrobial susceptibility testing results.

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.

Objective:To explore the structural relationship between WMSDs in the upper limbs and various risk factors in the occupational population in China, based on a large sample epidemiological survey and structural equation analysis, and to establish a structural equation model, so as to lay a foundation for the prevention and control of such diseases.Methods:The Chinese version of the Musculoskeletal Disorders Electronic Questionnaire was used to conduct a nationwide survey on the prevalence of WMSDs in the upper extremity. Six factors related to WMSDs in the upper extremity were extracted by the classification standard of adverse ergonomic factors and their source and confirmatory factor analysis, including work organization, work type, upper extremity work posture, individual factors, upper extremity fatigue and upper extremity WMSDs. The structural equation analysis was carried out and the structural equation model was established.Results:The incidence of WMSDs and fatigue in the upper limbs was 24.44% and 43.76%, respectively. The adjusted structural equation model fitting indicators were generally up to the standard (GFI=1.000, AGFI=1.000, RMSEA=0.043, NFI=0.808, TLI=0.784) . The four exogenous latent variables of work organization, work type, upper limb work posture and individual factors were correlated. There was a strong positive correlation between job type and upper limb work posture ( r=0.865) , a moderate positive correlation between work organization and job type and upper limb work posture ( r=0.570, 0.490) , and a weak negative correlation between individual factors and the other three exogenous latent variables. Upper limb work posture and individual factors had direct effects on upper limb WMSDs, and the effect coefficients were 0.10 and 0.06, respectively. Upper limb fatigue played a mediating role between work organization, work type, upper limb work posture and upper limb WMSDs. The effect coefficient was 0.46, and the composition ratios of indirect effects were 100.0%, 100.0%, and 38.3%, respectively. The direct path effect of upper limb work posture, individual factors and upper limb WMSDs was weaker than the mediating path through upper limb fatigue. Conclusion:When carrying out the prevention and control of upper limbWMSDs, it is necessary to comprehensively consider the pathogenesis path of upper limb muscle fatigue and upper limb WMSDs caused by work organization, work type, and upper limb work posture, so as to provide theoretical reference for improving the prevention and control level of such diseases.

Age-related macular degeneration (AMD) represents a predominant cause of blindness among older adults, with limited therapeutic options currently available. Oxidative stress, inflammation, and retinal pigment epithelium injury are recognized as key contributors to the pathogenesis of AMD. Regulated cell death plays a pivotal role in mediating cellular responses to stress, maintaining tissue homeostasis, and contributing to disease progression. Recent research has elucidated several regulated cell death pathways-such as apoptosis, ferroptosis, pyroptosis, necroptosis, and autophagy-that may contribute to the progression of AMD owing to cell death in the retinal pigment epithelium. These discoveries open new avenues for therapeutic interventions in patients with AMD. In this review, we provide a comprehensive summary and analysis of the latest advancements regarding the relationship between regulated cell death and AMD. Moreover, we examined the therapeutic potential of targeting regulated cell death pathways for the treatment and prevention of AMD, highlighting their roles as promising targets for future therapeutic strategies.

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

Objective:To investigate the incidence of shoulder work-related musculoskeletal disorders (WMSDs) among occupational population in China, and to explore their intrinsic association with personal and work-related factors.Methods:In April 2024, 73497 valid questionnaires of the Chinese version of the Musculoskeletal Disorders Electronic Questionnaire were retrospectively analyzed from June 2018 to December 2023 in 22 provinces and 29 key industries in China, and the general information, occurrence of WMSDs and related risk factors of key occupational populations in different regions in China were collected. By using Chi-square test and confirmatory factor analysis, the relationship between shoulder fatigue and pain in key occupational groups and individual factors, work type, work posture and work organization was discussed, and the internal relationship was analyzed based on structural equation model.Results:Higher incidence of shoulder fatigue and pain were associated with female, lack of physical exercise, uncomfortable working posture and neck leaning forward ( P<0.05). Structural equation model analysis showed that work type, work posture and work organization were strongly correlated ( r=0.58, 0.55). Work organization and work type were strongly correlated with shoulder fatigue ( r=0.65) and moderately correlated with shoulder fatigue ( r=0.21). Shoulder fatigue was moderately associated with shoulder pain ( r=0.40). Individual factors, work type, work posture and shoulder fatigue could directly affect shoulder pain ( OR=0.07, -0.09, 0.17 and 0.40), and work type and work posture could also indirectly affect shoulder pain through shoulder fatigue ( OR=0.08, 0.03). Work organization only indirectly affected shoulder pain through shoulder fatigue ( OR=0.26) . Conclusion:The main influencing factor of shoulder pain is shoulder fatigue, followed by work posture and individual factors. Structural equation model can better reflect the complex relationship between work type, work posture and work organization and shoulder WMSDs. Improving work posture and work organization may be an effective way to control the influence of shoulder fatigue on shoulder pain.

Objective:To explore the structural equation model to explore the levels of work-related musculoskeletal disorders (WMSDs) and various risk factors in the feet and ankle of China's occupational population, providing scientific basis for for preventing WMSDs in feet and ankles.Methods:Data of 73497 national occupational epidemiological cases were selected from June 2018 to December 2023 used the Chinese version of the Electronic Questionnaire on Musculoskeletal Disorders. The adverse ergonomic factors and their source classification standard and confirmatory factor analysis were used to investigate foot and ankle WMSDs and their related risk factors (including individual factors, work organization, work posture, work type, fatigue, etc.) in key occupational groups in China, and structural equation model hypothesis, fitting, verification, and path and intermediary effect analysis were carried out. The model fit evaluation indexes included Chi-square specific degrees of freedom ( χ2/ df), gauge fit index (NFI), Tucker Lewis index (TLI), goodness of Fit index (GFI), adjusted Goodness of Fit index (AGFI) and approximate root mean square error (RMSEA) . Results:A total of 73497 occupational workers were surveyed, with local muscle fatigue and WMSDs incidence rates in the feet and ankles being 17.17% and 12.06%, respectively. The fitting index of the adjusted structural equation model basically meets the standard (GFI=1, AGFI=1, RMESA=0.042, NFI=0.716, TLI=0.663). The top three factors affecting feet and ankle WMSDs are feet and ankle muscle fatigue, work type, and work organization, with standardized path coefficients of 0.221, 0.105, and 0.095, respectively. The top two factors affecting feet and ankle muscle fatigue are work organization and work type, with standardized path coefficients of 0.548 and 0.383, respectively. Feet and ankle muscle fatigue, work type, work organization, and work posture have a direct effect on feet and ankle WMSDs, with effect values of 0.221, 0.105, 0.095, and 0.077, respectively. The organization and type of work can also have indirect effects through feet and ankle muscle fatigue, with effect values of 0.121 and 0.084, respectively.Conclusion:Feet and ankle muscle fatigue has a direct impact on WMSDs, and plays a mediating role between ankle and ankle WMSDs caused by work organization and work type. Feet and ankle muscle fatigue is an important pathway leading to feet and ankle WMSDs. It is recommended that employers and managers detect job fatigue early and take corresponding prevention and intervention measures, which can play a key role in preventing feet and ankle WMSDs.