Objective To observe the effect of canagliflozin combined with enalapril on diabetic nephropathy(DN).Methods DN patients were randomly divided into control group and treatment group.All patients in 2 groups received basic treatment of recombinant human insulin injection,and the control group was orally administered enalapril tablet 10 mg(qd).The treatment group was given orally canagliflozin tablet 100 mg(qd)on the basis of the control group.Both groups were treated for 8 weeks.Renal function,blood glucose index,serum vascular endothelial growth factor(VEGF),transforming growth factor-β(TGF-β),homocysteine(HCY)levels,clinical efficacy and incidence of adverse drug reactions were compared between 2 groups.Results There were 71 cases were included in the control group and 73 cases in the treatment group.After treatment,β2 microglobulin(β2-MG)in treatment group and control group were(0.21±0.03)and(0.28±0.04)mg·L-1;blood urea nitrogen(BUN)were(4.23±0.42)and(5.58±0.65)mmol·L-1;serum creatinine(SCr)were(89.32±8.29)and(101.25±10.18)pmol·L-1;24 h microalbumin(mAlb)were(49.38±5.06)and(58.21±6.43)mg;glycosylated hemoglobin(HbA1c)were(6.10±0.11)％and(6.45±0.16)％;2 h postprandial blood glucose levels were(6.05±0.78)and(7.68±1.82)mmol·L-1;fasting blood glucose(FBG)were(5.02±0.32)and(5.67±0.65)mmol·L-1;VEGF levels were(350.18±20.04)and(389.04±24.16)pg·mL-1;TGF-β were(148.32±16.57)and(168.24±20.02)pg·mL-1;HCY were(13.12±2.38)and(19.35±3.21)pmol·L-1,the differences were statistically significant(all P＜0.05).After treatment,the total effective rate of treatment group and control group were 83.56％(61 cases/73 cases)and 67.61％(48 cases/71 cases),the difference was statistically significant(P＜0.05).The total incidence of adverse drug reactions in treatment group and control group were 6.85％and 4.23％,with no significant difference(P＞0.05).Conclusion Canagliflozin combined with enalapril is effective in the treatment of diabetic nephropathy,which can improve renal function,regulate blood glucose metabolism,and down-regulate serum VEGF,TGF-β and HCY levels,and is safe and reliable.

Objective To observe the clinical efficacy and safety of rituximab injection combined with leflunomide tablets in the treatment of patients with systemic lupus erythematosus(SLE).Methods The SLE patients were divided into control and treatment groups according to cohort method.The control group received leflunomide with 50 mg·d-1 after meal in the first 3 days of treatment and was adjusted to 20 mg·d-1 thereafter.On the basis of control group,the treatment group was combined with rituximab,375 mg·m-2 was given intravenously every 2 weeks in the first 3 times of treatment,and adjusted to once every 4 weeks from the 4th dose.Two groups were treated for 24 weeks.The clinical efficacy,systemic lupus erythematosus disease activity index(SLEDAI)scores,serological indicators,24-hour urinary protein and adverse drug reactions were compared between two groups.Results The treatment and control groups were enrolled 74 cases and 72 cases,respectively.After treatment,the total effective rates of treatment and control groups were 91.89％(68 cases/74 cases)and 79.17％(57 cases/72 cases)with significant difference(P＜0.05).After treatment,the SLEDAI scores of treatment and control groups were(7.21±1.67)and(9.03±1.35)points;the levels of anti-Smith/ribonucleoprotein antibodies were(81.43±18.25)and(59.38±14.61)U·mL-1;the levels of immunoglobulin G were(12.04±2.15)and(17.28±2.64)g·L-1;the levels of interleukin-10 were(33.39±7.13)and(39.87±9.02)pg·mL-1;24-hour urinary protein quantification were(1.46±0.32)and(2.67±0.54)g·24 h-1;all the differences were statistically significant(all P＜0.05).The drug adverse reactions of two groups were liver and kidney function injury and digestive tract reactions.The total incidences of drug adverse reactions in the treatment and control groups were 13.51％and 5.56％without significant difference(P＞0.05).Conclusion Rituximab injection combined with leflunomide tablets has a definitive clinical efficacy in the treatment of SLE patients,which can significantly reduce disease activity and inflammatory reactions,improve immune function,without increasing the incidence of drug adverse reactions.

Objective To analyze the research status and trend of scarlet fever literature in China, and to provide reference for subsequent research. Methods Three major Chinese databases, CNKI, Wanfang, and VIP, as well as Web of Science English database, were used to search for literature related to scarlet fever from 2000 to 2023. Citespace6.2.R2 software was used to statistically analyze the number of publications, authors, institutions and journals, co-cited literature, keyword clustering, and other literature characteristics of the literature. Results From 2000 to 2023, a total of 1 011 Chinese literature were included in the three major Chinese databases. Since 2011, the number of publications had gradually increased, but in recent years, the number of publications had decreased. The organization with the most publications was the Shenyang Center for Disease Control and Prevention. The cluster analysis of key words mainly formed 9 cluster tags, and the high-frequency keywords mainly included epidemic characteristics, epidemiology, incidence rate, etc. A total of 84 English literature were included in the WOS database, with an overall upward trend in publication volume. The institution with the most publications was the China Center for Disease Control and Prevention, and the most frequently cited journal was ^“LANCET INFECT DIS^”.《Resurgence of scarlet fever in China: a 13-year population-based surveillance study》 was the most cited journal. After keyword cluster analysis, 9 cluster labels were mainly formed, and the keywords were mainly outbreak，Hong Kong, and Group A streptococcus. Conclusion Compared with the English literature, which mainly focuses on spatiotemporal aggregation, etiology and strain resistance, Chinese literature focuses more on epidemic surveillance, clinical features and quality nursing.

Objective: To understand characteristics of men who have sex with men (MSM) who applied for HIV antibody self-testing reagents through "AIDS self-testing" column of a WeChat official account named "Dark Blue Public Health Center" in Tianjin City, so as to provide insights into exploring online modes of HIV antibody self-testing for MSM. Methods: Data of MSM who were 18 years old or above, currently lived in Tianjin City, had sex with men in the past six months and applied for HIV antibody self-testing reagents through "AIDS self-testing" column from May 2018 to December 2022 were collected. Demographic characteristics, results return and positive findings were descriptively analyzed. Results: Data of 2 064 MSM were collected, including 1 052 MSM aged 20 to 29 years (50.97%), 1 522 unmarried MSM (73.74%), 545 workers (26.41%), 1 385 MSM with college education or above (67.10%), and 315 MSM without testing for HIV antibody in the past (15.26%). A total of 6 470 self-testing reagents were applied, and 5 942 testing results were returned, with a return rate of 91.84%. There were 33.28% (687/2 064) of the applicants applying for 66.32% (4 291/6 470) reagents multiple times. There were 73 MSM with positive results, accounting for 1.23%. Conclusions The MSM applying for HIV antibody self-testing reagents through "AIDS self-testing" are mainly young and highly educated, including some who have never tested for HIV. However, attention should be paid to duplicate applications and the return rate should be increased.

Objective To investigate the clinical effect of unilateral percutaneous vertebroplasty(PVP)combined with 3D printing technology for the treatment of thoracolumbar osteoporotic compression fracture.Methods A total of 77 patients with thoracolumbar osteoporotic compression fractures from October 2020 to April 2022 were included in the study,all of which were vertebral body compression fractures caused by trauma.According to different treatment methods,they were di-vided into experimental group and control group.Thirty-two patients used 3D printing technology to improve unilateral transpedicle puncture vertebroplasty in the experimental group,there were 5 males and 27 females,aged from 63 to 91 years old with an average of(77.59±8.75)years old.Forty-five patients were treated with traditional bilateral pedicle puncture vertebroplasty,including 7 males and 38 females,aged from 60 to 88 years old with an average of(74.89±7.37)years old.Operation time,intraoperative C-arm X-ray times,anesthetic dosage,bone cement injection amount,bone cement diffusion good and good rate,complications,vertebral height,kyphotic angle(Cobb angle),visual analogue scale(VAS),Oswestry disability index(ODI)and other indicators were recorded before and after surgery,and statistically analyzed.Results All patients were followed up for 6 to 23 months,with preoperative imaging studies,confirmed for thoracolumbar osteoporosis com-pression fractures,two groups of patients with postoperative complications,no special two groups of patients'age,gender,body mass index(BMI),time were injured,the injured vertebral distribution had no statistical difference(P＞0.05),comparable data.Two groups of patients with bone cement injection,bone cement dispersion rate,preoperative and postoperative vertebral body height,protruding after spine angle(Cobb angle),VAS,ODI had no statistical difference(P＞0.05).The operative time,intra-operative fluoroscopy times and anesthetic dosage were statistically different between the two groups(P＜0.05).Compared with the traditional bilateral puncture group,the modified unilateral puncture group combined with 3D printing technology had shorter operation time,fewer intraoperative fluoroscopy times and less anesthetic dosage.The height of anterior vertebral edge,kyphosis angle(Cobb angle),VAS score and ODI of the affected vertebrae were statistically different between two groups at each time point after surgery(P＜0.05).Conclusion In the treatment of thoracolumbar osteoporotic compression fractures,3D printing technology is used to improve unilateral puncture PVP,which is convenient and simple,less trauma,short operation time,fewer fluoroscopy times,satisfactory distribution of bone cement,vertebral height recovery and kyphotic Angle correction,and good functional improvement.

Objective:To explore the role of mechanical hemodynamic support (MHS) in mapping and catheter ablation of patients with hemodynamically unstable ventricular tachycardia (VT), report single-center experience in a cohort of consecutive patients receiving VT ablation during MHS therapy, and provide evidence-based medical evidence for clinical practice.Methods:This was a retrospective cohort study. Patients with hemodynamically unstable VT who underwent catheter ablation with MHS at Beijing Anzhen Hospital, Capital Medical University between August 2021 and December 2023 were included. Patients were divided into rescue group and preventive group according to the purpose of treatment. Their demographic data, periprocedural details, and clinical outcomes were collected and analyzed.Results:A total of 15 patients with hemodynamically unstable VT were included (8 patients in the rescue group and 7 patients in the preventive group). The acute procedure was successful in all patients. One patient in the rescue group had surgical left ventricular assist device (LVAD) implantation, remaining 14 patients received extracorporeal membrane oxygenation (ECMO) for circulation support. ECMO decannulation was performed in 12 patients due to clinical and hemodynamic stability, of which 6 patients were decannulation immediately after surgery and the remaining patients were decannulation at 2.0 (2.5) d after surgery. Two patients in the rescue group died during the index admission due to refractory heart failure and cerebral hemorrhage. During a median follow-up of 30 d (1 d to 12 months), one patient with LVAD had one episode of ventricular fibrillation at 6 months after discharge, and no further episodes of ventricular fibrillation and/or VT occurred after treatment with antiarrhythmic drugs. No malignant ventricular arrhythmia occurred in the remaining 12 patients who were followed up.Conclusions:MHS contributes to the successful completion of mapping and catheter ablation in patients with hemodynamically unstable VT, providing desirable hemodynamic status for emergency and elective conditions.

Spinal cord injury (SCI) is a devastating traumatic disease seriously impairing the quality of life in patients. Expectations to allow the hopeless central nervous system to repair itself after injury are unfeasible. Developing new approaches to regenerate the central nervous system is still the priority. Exosomes derived from mesenchymal stem cells (MSC-Exo) have been proven to robustly quench the inflammatory response or oxidative stress and curb neuronal apoptosis and autophagy following SCI, which are the key processes to rescue damaged spinal cord neurons and restore their functions. Nonetheless, MSC-Exo in SCI received scant attention. In this review, we reviewed our previous work and other studies to summarize the roles of MSC-Exo in SCI and its underlying mechanisms. Furthermore, we also focus on the application of exosomes as drug carrier in SCI. In particular, it combs the advantages of exosomes as a drug carrier for SCI, imaging advantages, drug types, loading methods, etc., which provides the latest progress for exosomes in the treatment of SCI, especially drug carrier.

Objective To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate.Methods A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software.STL data were input into 3D printer to print 1∶1 clavicle model and proximal clavicle anatomical plate.The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging.Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded.Results The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orienta-tion of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good.Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively.Conclusion The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Objective:To assess the deformation of the bladder-neck opening and the impact of the bladder-neck angle(BNA)on urination in male patients by fluid-structure interaction(FSI)analysis.Methods:We established geometric models of the blad-der,prostate and urethra were established,incorporating both normal and enlarged BNAs,and assessed the effects of BNA alteration on urinary flow by FSI simulation of the flow rate and pressure of the urine within the bladder,bladder neck and urethra,and that of pros-tate displacement as well.We retrospectively analyzed the clinical data on 145 male patients from the Second Hospital of Hebei Medical University between June 2020 and June 2023,39 with acute urine retention(the AUR group)and 106 without(the non-AUR group),and evaluate the impact of BNA on urination based on the urinary flow rate and prostate volume.Results:Comparative simulation a-nalysis showed significant differences in the total urethral pressure and flow rate between the normal and enlarged BNA models(P＜0.05).The maximum prostate displacement was found at the bladder neck,with moderate displacement and unchanged urethral diame-ter in the normal BNA model,but significant displacement and a reduced urethral opening diameter in the enlarged BNA model.FSI analysis confirmed an evident impact of enlarged BNA on urination,more significant in the AUR than in the non-AUR patients(P＜0.05).The BNAs in the patients with the maximum urinary flow rate(Qmax)of＜10,10-15 or＞15 ml/s were 83.7°±2.5°,67.5°±1.8° and 65.1°±4.8° respectively,with statistically significant difference between the former one and the latter two groups(P＜0.05).The BNAs in the patients with normal prostate volume or BPH of grade Ⅰ,Ⅱ,Ⅲ or Ⅳ were 65.0°±3.7°,67.2°±3.1°,71.5°±2.0°,82.8°±3.5° and 105.8°±6.0°,respectively(P＜0.05),with statistically significant difference between BPH grades Ⅲ and Ⅳ(P＜0.05)as well as between these two and the other three groups(P＜0.05),but not among the normal prostate volume,BPH grade Ⅰ and BPH grade Ⅱ groups(P＞0.05).Spearman correlation analysis indicated that BNA was strongly correlated with total prostate volume(TPV),transition zone volume(TZV),intravesical prostatic protrusion(IPP),prostatic urethral angle(PUA),IPSS,and Qmax(P＜0.05).Conclusion:Changes in BNA affect urination and are closely associated with the se-verity of prostate hyperplasia.The BNA may be an important anatomical factor for assessing the severity of lower urinary tract symptoms in BPH patients.

AIM To establish the quality standard of the zhujieshen Formula Granules based on standard decoction.METHODS The contents and transfer rates of ginsenoside Ro and chikusetsu saponin Ⅳa in standard decoction and formula granules were determined by HPLC,after which the transfer rates were calculated.The HPLC characteristic chromatograms of standard decoctions were established,after which cluster analysis and principal component analysis were adopted.Then the HPLC characteristic chromatograms of formula granules were established.RESULTS Nine common peaks were found in the HPLC characteristic chromatograms of seventeen batches of standard decoctions with the similarities of more than 0.9(except for S6,S12),which were clustered into two categories,and the accumulative variance contribution rate of three principal components reached 86.7％.The contents of ginsenoside Ro in three batches of formula granules were 83.1-88.6 mg/g,and the transfer rates were 53.1％-55.5％.The contents of chikusetsusaponin Ⅳa were 14.8-15.0 mg/g,and the transfer rates were 47.4％-48.1％.Nine common peaks were found in the HPLC characteristic chromatograms of three batches of formula granules with the similarities of 0.998,0.998 and 0.999,respectively.CONCLUSION This reasonable and reliable method can comprehensively evaluate the quality of Zhujieshen Formula Granules,and provide a reference for the quality control.