Based on the theory of "shaoyang（少阳） resembling the pivot" and collateral diseases， this article proposes that pulmonary fibrosis （PF） can be divided into three stages including wind bi （痹）， constraint bi， and atrophy bi. The core pathogenesis of PF is the obstruction of the pivot and pulmonary collateral obstruction. In terms of treatment， the basic principles are to harmonize and regulate the pivot， and to promote the circulation of the lung collaterals. Depending on the different characteristics of the "essence-attribute-function"， treatment methods such as harmonizing and regulating the pivot， resolving phlegm and removing stasis， supplementing deficiency and harmonizing collaterals are suggested. This approach ensures the regulation of the pivot， smooth circulation of qi and blood， unblocking of the lung collaterals and nourishing the lung body， achieving the goals of balancing the ascending and descending of qi， removing phlegm and stasis， and relieving cough and wheezing.

OBJECTIVE: To investigate the clinical effect of minimally invasive technique in the treatment of moderate and severe gluteal muscle contracture. METHODS: A retrospective study was conducted on 85 patients (170 sides) with bilateral gluteal muscle contracture admitted from January 2016 to December 2019. All patients were treated with minimally invasive release of tendon knife. There were 32 males and 53 females, ranging in age from 15 to 37 years old, with an average age of (22.3±6.3) years old. Operation time, intraoperative blood loss, incision length, first postoperative ambulation time, complication rate, recurrence rate, and Harris hip score (HHS) were analyzed and evaluated. RESULTS: The average follow-up time was (16.2±4.6) months, ranging from 12 to 30 months. The operation time ranged from 7 to 15 min, with an average of (10.2±3.1) min. Intraoperative blood loss ranged from 2 to 20 ml, with an average of (8.4±2.2) ml. The incision length ranged from 0.6 to 2.0 cm, with an average of (0.8±0.3) cm. The time to postoperative ambulation ranged from 12 to 28 h, with an average of (20.0±3.2) h. All patients achieved primary wound healing without sciatic nerve injury or recurrence. HHS hip function scores ranged from 90 to 98, with an average score of (96.2±1.4). Complications included intraoperative tendon blade tip fracture in two cases (removed under fluoroscopic guidance) and subcutaneous hematoma in three cases-two resolved with compression and one with open evacuation.. Twenty-nine patients exhibited transient swaying gait postoperatively, of which 24 patients returned to normal after 4 weeks and 5 patients returned to normal after 6 weeks. CONCLUSION Minimally invasive tendon blade release is a safe and effective technique for treating gluteal muscle contracture, offering minimal trauma, rapid recovery, and excellent cosmetic and functional outcomes. However, it exhibits a low risk of blade tip fracture and sciatic nerve injury, warranting experienced surgical handling.
Humans ; Male ; Female ; Adult ; Minimally Invasive Surgical Procedures/methods* ; Adolescent ; Retrospective Studies ; Buttocks/surgery* ; Young Adult ; Contracture/surgery* ; Tendons/surgery* ; Muscle, Skeletal/surgery*

OBJECTIVES: To investigate the clinical features of children with STAT gene mutations, and to explore corresponding immunotherapy strategies. METHODS: A retrospective analysis was performed for the clinical data of 10 children with STAT gene mutations who were admitted to the Department of Pediatrics of the First Affiliated Hospital of Guangzhou Medical University, from October 2015 to October 2024. Exploratory immunotherapy was implemented in some refractory cases, and the changes in symptoms, imaging manifestations, and cytokine levels were assessed after treatment. RESULTS: For the 10 children, the main clinical manifestations were recurrent rash since birth (7/10), cough (8/10), wheezing (5/10), expectoration (4/10), and purulent nasal discharge (4/10). Genotyping results showed that there was one child with heterozygous loss-of-function (LOF) mutation in the STAT1 gene, four children with heterozygous LOF mutation in the STAT3 gene, and five children with heterozygous gain-of-function (GOF) mutation in the STAT3 gene. Two children with LOF mutation in the STAT3 gene showed decreased interleukin-6 levels and improved clinical symptoms and imaging findings after omalizumab treatment. Three children with GOF mutation in the STAT3 gene achieved effective disease control after treatment with methylprednisolone (0.5 mg/kg per day). Two children with GOF mutation in the STAT3 gene received treatment with JAK inhibitor and then showed some improvement in symptoms. CONCLUSIONS STAT gene mutation screening should be considered for children with recurrent rash and purulent respiratory tract infections. Targeted immunotherapy may improve prognosis in patients with no response to conventional treatment.
Humans ; Male ; Immunotherapy ; Female ; Child, Preschool ; Child ; Gain of Function Mutation ; Retrospective Studies ; Infant ; Loss of Function Mutation ; STAT Transcription Factors/genetics*

OBJECTIVES: To investigate the chain mediating role of family care and emotional management in the relationship between social support and anxiety among rural primary school students. METHODS: A questionnaire survey was conducted among students in grades 4 to 6 from four counties in Hunan Province. Data were collected using the Social Support Rating Scale, Family Care Index Scale, Emotional Intelligence Scale, and Generalized Anxiety Disorder -7. Logistic regression analysis was used to explore the influencing factors of anxiety symptoms. Mediation analysis was conducted to assess the chain mediating effects of family care and emotional management between social support and anxiety. RESULTS: A total of 4 141 questionnaires were distributed, with 3 874 valid responses (effective response rate: 93.55%). The prevalence rate of anxiety symptoms among these students was 9.32% (95%CI: 8.40%-10.23%). Significant differences were observed in the prevalence rates of anxiety symptoms among groups with different levels of social support, family functioning, and emotional management ability (P<0.05). The total indirect effect of social support on anxiety symptoms via family care and emotional management was significant (β=-0.137, 95%CI: -0.167 to -0.109), and the direct effect of social support on anxiety symptoms remained significant (P<0.05). Family care and emotional management served as significant chain mediators in the relationship between social support and anxiety symptoms (β=-0.025,95%CI:-0.032 to -0.018), accounting for 14.5% of the total effect. CONCLUSIONS Social support can directly affect anxiety symptoms among rural primary school students and can also indirectly influence anxiety symptoms through the chain mediating effects of family care and emotional management. These findings provide scientific evidence for the prevention of anxiety in primary school students from multiple perspectives.
Humans ; Female ; Male ; Social Support ; Anxiety/etiology* ; Child ; Students/psychology* ; Emotions ; Logistic Models

T-cell acute lymphoblastic leukemia (T-ALL) is a highly aggressive hematologic malignancy with a poor prognosis, despite advancements in treatment. Many patients struggle with relapse or refractory disease. Investigating the role of the super-enhancer (SE) regulated gene ubiquitin-specific protease 20 (USP20) in T-ALL could enhance targeted therapies and improve clinical outcomes. Analysis of histone H3 lysine 27 acetylation (H3K27ac) chromatin immunoprecipitation sequencing (ChIP-seq) data from six T-ALL cell lines and seven pediatric samples identified USP20 as an SE-regulated driver gene. Utilizing the Cancer Cell Line Encyclopedia (CCLE) and BloodSpot databases, it was found that USP20 is specifically highly expressed in T-ALL. Knocking down USP20 with short hairpin RNA (shRNA) increased apoptosis and inhibited proliferation in T-ALL cells. In vivo studies showed that USP20 knockdown reduced tumor growth and improved survival. The USP20 inhibitor GSK2643943A demonstrated similar anti-tumor effects. Mass spectrometry, RNA-Seq, and immunoprecipitation revealed that USP20 interacted with hypoxia-inducible factor 1 subunit alpha (HIF1A) and stabilized it by deubiquitination. Cleavage under targets and tagmentation (CUT&Tag) results indicated that USP20 co-localized with HIF1A, jointly modulating target genes in T-ALL. This study identifies USP20 as a therapeutic target in T-ALL and suggests GSK2643943A as a potential treatment strategy.

Objective:To explore the short-term clinical effects of deep cervical lymph node-venous anastomosis in the treatment of Alzheimer’s disease (AD).Methods:A prospective exploratory study was conducted on the treatment of AD patients using the cervical deep lymph node-venous anastomosis technique in Scar and Wound Treatment Department, Plastic Surgery Hospital, Chinese Academy of Medical Sciences, from September to October 2024. The patients underwent high-frequency ultrasound to locate deep cervical lymph nodes and the external jugular vein. Under general anesthesia, bilateral deep cervical lymph node-venous anastomoses were performed. Indocyanine green (ICG) lymphography was conducted via subcutaneous injection behind the ear to visualize lymph nodes in levels Ⅱ and Ⅲ. After making a skin incision along the posterior margin of the sternocleidomastoid muscle, the external jugular vein, internal jugular veins, and associated lymph nodes were exposed. Adjacent veins were selected for anastomosis of lymph node. Using microsurgical techniques, end-to-side or end-to-end anastomosis was completed for lymph nodes in levels Ⅱ and Ⅲ. Preoperative assessments included the mini-mental state examination (MMSE, a higher score indicates better cognitive function), Alzheimer’s disease assessment scale-cognitive subscale (ADAS-Cog, a higher score indicates greater impairment of cognitive function), Alzheimer’s disease cooperative study scale for activities of daily living (ADCS-ADL, a higher score indicates better ability to perform daily activity), and neuropsychiatric inventory (NPI, a higher score indicates more severe behavioral and emotional symptom). Postoperative follow-up included the same scales to observe changes in cognitive function, activities of daily living, and emotional communication.Results:Four patients (1 male, 3 females, aged 58-79 years) with AD were included. All were diagnosed based on cerebrospinal fluid biomarkers. All patients successfully underwent bilateral deep cervical lymph node-venous anastomoses. On average, 4.3 (2-7 per person) anastomoses were performed per patient. Surgical procedures lasted an average of 6.5 h (5.5-8.5 h) with minimal blood loss (less than 50 ml). Patients resumed normal activity within 6 hours postoperatively and were discharged after an average of 4.1 d (3.5-5.0 d). Postoperative complications included one case each of aspiration pneumonia, lower limb venous thrombosis, and transient delirium, all of whom resolved without long-term effects. Clinical symptoms, including memory decline, mood swings, and anxiety, showed varying degrees of improvement. Patients reported enhanced quality of life, emotional stability, and social engagement, confirming the procedure’s safety and potential cognitive benefits. At one month postoperatively, the MMSE scores of the four patients increased by an average of 0.8 points compared to preoperative levels. Additionally, the two patients who completed the ADAS-Cog assessments showed a decrease in their scores (reduced by 1.0 points and 11.3 points, respectively, compared to preoperative scores), indicating a certain degree of improvement in cognitive function during this period. The ADCS-ADL and NPI scores of four patients varied significantly, without showing any clear pattern.Conclusion:Lymphovenous anastomosis of the deep cervical lymph node-venous anastomosis may provide a new surgical intervention approach for AD, but further large-scale studies and long-term follow-up are needed to validate its safety and effectiveness.

Three evaluation methods were recommended for the key properties of the intravascular catheter lubricating coating such as stability,lubricity and integrity,including insoluble particle test method,friction test procedure and appearance detection method.Fifteen batches of microcatheters produced by different manufacturers were selected for testing to clarify the three methods in test principle,step,result,characteristic.References were provided for the design,production,evaluation and regulation of intravascular catheters with lubricant coatings.[Chinese Medical Equipment Journal,2025,46(1):66-72]

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Objective:To compare the safety and efficacy of 3D-printed porous bioceramic artificial bone and artificial bone substitutes in the treatment of limb bone defects.Methods:A total of 220 patients with post-traumatic limb bone defects admitted to Xijing Hospital Affiliated to Air Force Medical University of the Chinese People's Liberation Army (34 cases), the Third Hospital of Hebei Medical University (60 cases), Xi'an Honghui Hospital (28 cases), the Third Hospital of Southern Medical University (18 cases), Changsha Third Hospital (28 cases), Foshan Traditional Chinese Medicine Hospital (16 cases), Foshan Fuxing Chancheng Hospital (12 cases), and Henan Provincial Orthopaedic Hospital (24 cases) from May 2022 to October 2023 were included as research subjects. According to the manufacturing method of the bone graft material, the subjects were randomly divided into the 3D printed porous bioceramic artificial bone group (3D printing group) and the artificial bone substitute group (non-3D printing group) at a ratio of 1:1 by the envelope method. Adverse events that might be related to the surgery were selected through correlation evaluation and classified as abnormal laboratory indicators, systemic or other site symptoms and abnormalities, and local symptoms and abnormalities of the affected limb. The safety of the two groups was compared. The bone graft fusion rate, bone defect repair and healing rate, and short form 12 (SF-12) score of the two groups were calculated to evaluate the postoperative recovery.Results:Thirty-two cases were excluded (4 cases refused to use their data after reconsideration, 7 cases were not used after preoperative assessment, and 21 cases exceeded the standard for body mass index and laboratory indicators upon re-examination). A total of 188 cases were randomly divided into the 3D printing group and the non-3D printing group according to the random method, with 94 cases in each group. Among them, 11 cases in the 3D printing group and 9 cases in the non-3D printing group dropped out due to loss to follow-up. Finally, 168 cases completed the follow-up, including 83 cases in the 3D printing group and 85 cases in the non-3D printing group. In the 3D printing group, there were 53 males and 30 females, with an average age of 47.9±12.7 years; in the non-3D printing group, there were 53 males and 32 females, with an average age of 48.6±12.9 years. A total of 51 cases in the two groups experienced adverse events related to the surgery, including 13 cases of abnormal laboratory indicators (5 cases in the 3D printing group and 8 cases in the non-3D printing group), 15 cases of systemic or other site symptoms and abnormalities (9 cases in the 3D printing group and 6 cases in the non-3D printing group), and 23 cases of local symptoms and abnormalities of the affected limb (13 cases in the 3D printing group and 10 cases in the non-3D printing group). There was no statistically significant difference in the incidence of adverse events between the two groups ( P>0.05). The bone graft fusion rates of the 3D printing group and the non-3D printing group at 6 months after surgery were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 89%(74/83) and 89%(76/85), respectively. At the time of 12 months after surgery, the bone graft fusion rates were 99%(82/83) and 99%(84/85), respectively, and the bone defect repair and healing rates were 94%(78/83) and 92%(78/85), respectively. There was no statistically significant difference in the bone graft fusion rate and bone defect repair and healing rate between the two groups ( P>0.05). The SF-12 scores during the screening period were 27.82±2.96 points and 27.22±4.23 points in the 3D printing group and the non-3D printing group, respectively, and at 3 months after surgery were 28.08±3.13 points and 27.64±3.16 points, at 6 months after surgery were 29.42±3.10 points and 28.55±3.45 points, and at 12 months after surgery were 29.78±2.80 points and 29.58±2.94 points, respectively. There was no statistically significant difference between the groups ( P>0.05). Both groups of surgeries were successfully completed without any serious surgical or bone graft-related complications. Conclusion:The safety and efficacy of 3D-printed porous bioceramic artificial bone in the treatment of limb bone defects are not significantly different from those of currently clinically applied artificial bone substitutes.

Three evaluation methods were recommended for the key properties of the intravascular catheter lubricating coating such as stability,lubricity and integrity,including insoluble particle test method,friction test procedure and appearance detection method.Fifteen batches of microcatheters produced by different manufacturers were selected for testing to clarify the three methods in test principle,step,result,characteristic.References were provided for the design,production,evaluation and regulation of intravascular catheters with lubricant coatings.[Chinese Medical Equipment Journal,2025,46(1):66-72]