Ethanol detection plays an important role in food industry,environmental monitoring,medical health monitoring,prevention of drunk driving,etc.The development of low-cost,high-performance ethanol sensors has important application value.In this study,a ZnO/FeS nano heterojunction ethanol sensor was prepared on commercial ceramic silver electrode substrate.The sensing characteristics of the sensor for ethanol gas were systematically studied.The results showed that ZnO had a nanowire structure,and the FeS was coated on the ZnO nanowire in the form of nanosheets.The sensor performed well for ethanol detection in environments with relative humidity ranging from 30%to 60%,with a detection range from 0.2 mg/m3 to 50 mg/m3.At the optimum operating temperature of 300℃,the response of ZnO/FeS nano heterojunction sensor to 50 mg/m3 ethanol was 15.6,the response time was 5.0 s,and the detection limit was as low as 0.101 mg/m3,which was obviously better than that of commercial ethanol sensor.This sensor was highly selective for ethanol compared to other gases such as CO,NH3,acetone,etc,and could steadily work for 30 days.The fabricated sensor had good development potential in the field of low-cost and high-performance ethanol gas detection.

Objective To explore the correlation between the actual age and the pulp chamber volume(PCV)and pulp dentinal index(PDI)of the right first molars based on cone beam computed tomog-raphy(CBCT)technology,and to construct an accurate and convenient model for age estimation.Methods CBCT image data of 1 857 Han adults(883 males and 974 females)from the Department of Stomatology,Affiliated Hospital of North Sichuan Medical College were collected.The data were di-vided into training and validation sets at a ratio of 8∶2.A total of 1 485 training samples were used to construct the age estimation model,and 372 samples were used to validate the accuracy of the model.The Mimics 21.0 software was used to measure the PCV and calculate the PDI of the right first molars.Their correlations with age and the differences between different sexes and tooth positions were analyzed.Results Both the PCV and the PDI of the first molars showed strong negative correla-tions with the actual age(r values ranged from 0.82 to 0.89).The differences in PCV and PDI be-tween different sexes and tooth positions were statistically significant(P<0.05).The age estimation model based on PDI was superior to that based on PCV.The model based on the PDI values of the two right first molars(y=73.72-44.15 x3-28.27 x4,where x3 and x4 are the PDI values of the right maxil-lary and mandibular first molars,respectively)was the best,with the R2 of 0.79 and the mean abso-lute error of 4.90 years.Conclusion Both PCV and PDI of the first molars are effective indicators for age estimation.The age estimation model based on the PDI is more convenient and accurate than that based on the PCV,providing a more effective method for age estimation in forensic practice.

Oral inflammatory diseases caused by odontogenic infections cover a wide range and have a high incidence rate,which can affect the morphology and function of the maxillofacial area and seriously en-danger oral health.Macrophages are important immunoactive cells in oral tissues,which can be polarized into M1/M2 type in different microenvironments,and then exert pro-inflammatory or anti-inflammatory effects,and are widely involved in the progression of odontogenic infectious diseases.In infections caused by oral mi-crobial factors such as bacteria,the distribution characteristics and polarization direction of macrophages in tis-sues are specific.At present,the research on macrophage polarization-related inflammatory diseases has attrac-ted more and more attention,and the regulation of macrophage M1/M2 polarization is gradually being used in the treatment of related diseases,and many research progress has been made in the diagnosis and treatment of odontogenic infectious diseases.In this paper,we elaborate on the distribution characteristics,polarization trends and related applications of macrophage polarization in common oral inflammatory diseases such as pul-pitis,apical periodontitis,periodontitis and peri-implantitis which are mainly caused by dental infections.The aim is to provide new ideas and targets for the diagnosis and treatment of oral inflammatory diseases.

OBJECTIVE: Lipid oxidation is involved in the pathogenesis of atherosclerosis and may be contribute to the development of Ischemic stroke (IS). However, the lipid profiles associated with IS have been poorly studied. We conducted a pilot study to identify potential IS-related lipid molecules and pathways using lipidomic profiling. METHODS: Serum lipidomic profiling was performed using LC-MS in 20 patients with IS and 20 age- and sex-matched healthy controls. Univariate and multivariate analyses were simultaneously performed to identify the differential lipids. Multiple testing was controlled for using a false discovery rate (FDR) approach. Enrichment analysis was performed using MetaboAnalyst software. RESULTS: Based on the 294 lipids assayed, principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (OPLS-DA) models were used to distinguish patients with IS from healthy controls. Fifty-six differential lipids were identified with an FDR-adjusted P less than 0.05 and variable influences in projection (VIP) greater than 1.0. These lipids were significantly enriched in glycerophospholipid metabolism (FDR-adjusted P = 0.009, impact score = 0.216). CONCLUSIONS Serum lipid profiles differed significantly between patients with IS and healthy controls. Thus, glycerophospholipid metabolism may be involved in the development of IS. These results provide initial evidence that lipid molecules and their related metabolites may serve as new biomarkers and potential therapeutic targets for IS.
Humans ; Pilot Projects ; Lipidomics ; Male ; Female ; Biomarkers/blood* ; Middle Aged ; Ischemic Stroke/blood* ; Aged ; China ; Lipids/blood* ; Adult ; Case-Control Studies ; East Asian People

OBJECTIVE: To explore the relationship between serum chloride levels and prognosis in patients with hepatic coma in the intensive care unit (ICU). METHODS: We analyzed 545 patients with hepatic coma in the ICU from the Medical Information Mart for Intensive Care IV (MIMIC-IV) database. Associations between serum chloride levels and 28-day and 1-year mortality rates were assessed using restricted cubic splines (RCSs), Kaplan-Meier (KM) curves, and Cox regression. Subgroup analyses, external validation, and mechanistic studies were also performed. RESULTS: A total of 545 patients were included in the study. RCS analysis revealed a U-shaped association between serum chloride levels and mortality in patients with hepatic coma. The KM curves indicated lower survival rates among patients with low chloride levels (< 103 mmol/L). Low chloride levels were independently linked to increased 28-day and 1-year all-cause mortality rates. In the multivariate models, the hazard ratio ( HR) for 28-day mortality in the low-chloride group was 1.424 (95% confidence interval [ CI]: 1.041-1.949), while the adjusted hazard ratio for 1-year mortality was 1.313 (95% CI: 1.026-1.679). Subgroup analyses and external validation supported these findings. Cytological experiments suggested that low chloride levels may activate the phosphorylation of the NF-κB signaling pathway, promote the expression of pro-inflammatory cytokines, and reduce neuronal cell viability. CONCLUSION Low serum chloride levels are independently associated with increased mortality in patients with hepatic coma.
Humans ; Male ; Female ; Middle Aged ; Intensive Care Units ; Prognosis ; Chlorides/blood* ; Aged ; Coma/blood* ; Adult

OBJECTIVE: To determine risk factors for cutout failure in geriatric intertrochanteric fracture patients after cephalomedullary nail fixation. METHODS: A retrospective review of 518 elderly patients who underwent cephalomedullary nail fixation for intertrochanteric fractures between January 2008 and August 2018 was conducted, including 167 males and 351 females, age from 65 to 97 years old. All patients were followed up for at least one year after surgery and divided into a healed group and a cutout group based on whether the hip screw cutout occurred. Among all patients, 10 cases experienced hip screw cutout. The general information, surgical data, and radiological data of the two groups were compared, and risk factors influencing hip screw cutout were analyzed. Propensity score matching was then performed on the cutout group based on gender, age, body mass index(BMI), and American Society of Anesthesiologists(ASA), and 40 patients from the healed group were matched at a ratio of 1∶4. Key risk factors affecting hip screw cutout were further analyzed. Multivariable logistic regression analysis was conducted to evaluate associations between variables and cutout failure. RESULTS: There were no statistically significant differences between the healed group and the cutout group in terms of age, gender, BMI, ASA, and AO classification. However, statistically significant differences were observed between the two groups in terms of reduction quality(P=0.003) and tip-apex distance(TAD), P<0.001. Multivariate analysis identified poor reduction quality OR=23.138, 95%CI(2.163, 247.551), P=0.009 and TAD≥25 mm OR=30.538, 95%CI(2.935, 317.770), P=0.004 as independent risk factors for cutout failure. CONCLUSION The present study identified poor reduction quality and TAD≥25 mm as factors for cutout failure in geriatric intertrochanteric fractures treated with cephalomedullary nails. Further studies are needed to calculate the optimal TAD for cephalomedullary nails.
Humans ; Male ; Female ; Hip Fractures/surgery* ; Aged, 80 and over ; Aged ; Risk Factors ; Retrospective Studies ; Fracture Fixation, Intramedullary/adverse effects* ; Bone Nails ; Bone Screws

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

PURPOSE: Lateral patellar compression syndrome (LPCS) is characterized by a persistent abnormally high stress exerted on the lateral articular surface of the patella due to lateral patellar tilt without dislocation and lateral retinaculum contracture, leading to anterior knee pain. The purpose of this study is to evaluate the efficacy and prognosis of lateral retinaculum release (LRR) combined with chondroplasty in the treatment of LPCS. METHODS: This retrospective study evaluated 40 patients who underwent LRR combined with chondroplasty for LPCS between 2020 and 2021. The assessment included improvement in postoperative tenderness and knee joint function. Patients were evaluated using the Lysholm, Tegner, and International Knee Documentation Committee 2000 scoring systems, as well as the visual analog scale, both preoperatively and postoperatively, with the paired comparisons analyzed using a t-test. Additionally, intraoperative observations were made regarding knee joint lesions, including cartilage damage and osteophyte formation, with analysis by the Chi-square test. RESULTS: The visual analog scale score for tenderness showed a significant decrease after surgery (p < 0.001). Evaluation of knee joint function also indicated significant improvements, as demonstrated by increased Lysholm, Tegner, and International Knee Documentation Committee 2000 scores postoperatively (p < 0.001, p = 0.011, p < 0.001, respectively). Furthermore, all LPCS patients included in the study presented with cartilage injuries and osteophyte formation. Significant differences were noted in the incidence of cartilage damage and osteophyte formation at different locations within the knee among patients with LPCS. CONCLUSION LRR combined with chondroplasty is an effective surgical approach for treating patients with LPCS, with satisfactory recovery observed at the 1-year follow-up. Additionally, the incidence of cartilage damage and osteophyte formation in LPCS patients varies significantly depending on the specific location within the knee joint.
Humans ; Male ; Female ; Retrospective Studies ; Adult ; Middle Aged ; Patella/surgery* ; Knee Joint/physiopathology* ; Recovery of Function ; Young Adult ; Treatment Outcome ; Cartilage, Articular/surgery* ; Adolescent

[This corrects the article DOI: 10.11909/j.issn.1671-5411.2017.08.005.].

[This corrects the article DOI: 10.1016/j.apsb.2021.10.012.].