Casein kinase 2-interacting protein-1 (CKIP-1) is a multifunctional scaffold protein with a pleckstrin homology domain. Its dynamic subcellular localization enables dual roles in tumor progression, “promoting” or “suppressing” malignancy by regulating immune metabolism and signaling networks within the tumor immune microenvironment (TIME). This review synthesizes current knowledge on CKIP-1’s structural characteristics and TIME regulatory mechanisms. We highlight that CKIP-1 inhibits macrophage M2 polarization, antagonizes Smurf1-mediated oncoprotein ubiquitination, and modulates key pathways, including TGF-β and PI3K/AKT. Targeting CKIP-1 enhances the efficacy of immune checkpoint inhibitors and CAR-T therapy, but clinical translation faces challenges, such as unclear tissue-specific mechanisms and combination toxicity. This review aims to synthesize the regulatory functions of CKIP-1 in the tumor immune microenvironment, thereby offering a theoretical basis for precision immunotherapy targeting CKIP-1 and further analyzing its dynamic mechanisms to advance clinical applications.

Oral squamous cell carcinoma (OSCC) is a common head and neck malignancy. Approximately 50% to 60% of patients with OSCC are diagnosed at a locally advanced stage (clinical staging III-IVa). Even with comprehensive and sequential treatment primarily based on surgery, the 5-year overall survival rate remains below 50%, and patients often suffer from postoperative functional impairments such as difficulties with speaking and swallowing. Programmed death receptor-1 (PD-1) inhibitors are increasingly used in the neoadjuvant treatment of locally advanced OSCC and have shown encouraging efficacy. However, clinical practice still faces key challenges, including the definition of indications, optimization of combination regimens, and standards for efficacy evaluation. Based on the latest research advances worldwide and the clinical experience of the expert group, this expert consensus systematically evaluates the application of PD-1 inhibitors in the neoadjuvant treatment of locally advanced OSCC, covering combination strategies, treatment cycles and surgical timing, efficacy assessment, use of biomarkers, management of special populations and immune related adverse events, principles for immunotherapy rechallenge, and function preservation strategies. After multiple rounds of panel discussion and through anonymous voting using the Delphi method, the following consensus statements have been formulated: 1) Neoadjuvant therapy with PD-1 inhibitors can be used preoperatively in patients with locally advanced OSCC. The preferred regimen is a PD-1 inhibitor combined with platinum based chemotherapy, administered for 2-3 cycles. 2) During the efficacy evaluation of neoadjuvant therapy, radiographic assessment should follow the dual criteria of Response Evaluation Criteria in Solid Tumors (RECIST) version 1.1 and immune RECIST (iRECIST). After surgery, systematic pathological evaluation of both the primary lesion and regional lymph nodes is required. For combination chemotherapy regimens, PD-L1 expression and combined positive score need not be used as mandatory inclusion or exclusion criteria. 3) For special populations such as the elderly (≥ 70 years), individuals with stable HIV viral load, and carriers of chronic HBV/HCV, PD-1 inhibitors may be used cautiously under the guidance of a multidisciplinary team (MDT), with close monitoring for adverse events. 4) For patients with a poor response to neoadjuvant therapy, continuation of the original treatment regimen is not recommended; the subsequent treatment plan should be adjusted promptly after MDT assessment. Organ transplant recipients and patients with active autoimmune diseases are not recommended to receive neoadjuvant PD-1 inhibitor therapy due to the high risk of immune related activation. Rechallenge is generally not advised for patients who have experienced high risk immune related adverse events such as immune mediated myocarditis, neurotoxicity, or pneumonitis. 5) For patients with a good pathological response, individualized de escalation surgery and function preservation strategies can be explored. This consensus aims to promote the standardized, safe, and precise application of neoadjuvant PD-1 inhibitor strategies in the management of locally advanced OSCC patients.

BACKGROUND:With the development of oral implantology,implant restoration has gradually become the first choice of restoration after missing teeth,and bone augmentation procedures have led to the expansion of implant indications and the improvement of the success rate of implant restoration.However,the long-term stability of bone height,width and volume after bone augmentation surgery has been one of the clinical difficulties for oral implantologists.OBJECTIVE:To measure and analyze the bone width,height,and volume of different sites in the bone augmentation area at different time points using cone-beam CT and an automatic image alignment program.METHODS:Seventeen patients with severe bone defects in the upper anterior region who underwent Onlay bone block grafting in the external oblique region were recruited from the Department of Stomatology,Zhejiang Tongde Hospital.There were 10 males and 7 females,with a mean age of(45.88±12.47)years.The cone-beam CT scans of the patients' Onlay bone grafts were taken at five time points:preoperatively,immediately postoperatively,6 months postoperatively,immediately post implantation,and 6 months post implantation,and then were statistically analyzed for alveolar bone volume,width,and height in the bone augmentation area,as well as for the difference in the alveolar bone volume of the bone incremental area between patients of different sexes and age.RESULTS AND CONCLUSION:(1)The alveolar bone volume in the bone augmentation area was higher immediately and 6 months after bone grafting than before bone grafting(P＜0.05)as well as was higher immediately after bone grafting than 6 months after bone grafting(P＜0.05).The alveolar bone height in the bone augmentation area was higher immediately and 6 months after bone grafting than before bone grafting(P＜0.05).The horizontal width of the alveolar bone at various sites in the bone augmentation area immediately and 6 months after bone grafting was higher than that before bone grafting(P＜0.05).(2)There was no significant difference in the volume of bone graft resorption at various sites in the bone augmentation area between males and females immediately and 6 months after bone grafting(P＞0.05).Pearson correlation analysis showed a positive correlation between age and the change in bone augmentation area volume immediately and 6 months after bone grafting,but the difference was not statistically significant(P＞0.05).(3)Twenty-five dental implants with completed implant restorations functioned normally,and the survival rate of the implants was 100％.To conclude,Onlay bone graft implant restoration in the upper anterior region can significantly improve insufficient bone with favorable outcomes.However,there is some amount of bone resorption in the bone augmentation area at 6 months after Onlay bone grafting and it is necessary to open up the second surgical area.Clinicians should consider different bone augmentation procedures in accordance with the specific circumstances.

BACKGROUND:With the development of oral implantology,implant restoration has gradually become the first choice of restoration after missing teeth,and bone augmentation procedures have led to the expansion of implant indications and the improvement of the success rate of implant restoration.However,the long-term stability of bone height,width and volume after bone augmentation surgery has been one of the clinical difficulties for oral implantologists.OBJECTIVE:To measure and analyze the bone width,height,and volume of different sites in the bone augmentation area at different time points using cone-beam CT and an automatic image alignment program.METHODS:Seventeen patients with severe bone defects in the upper anterior region who underwent Onlay bone block grafting in the external oblique region were recruited from the Department of Stomatology,Zhejiang Tongde Hospital.There were 10 males and 7 females,with a mean age of(45.88±12.47)years.The cone-beam CT scans of the patients' Onlay bone grafts were taken at five time points:preoperatively,immediately postoperatively,6 months postoperatively,immediately post implantation,and 6 months post implantation,and then were statistically analyzed for alveolar bone volume,width,and height in the bone augmentation area,as well as for the difference in the alveolar bone volume of the bone incremental area between patients of different sexes and age.RESULTS AND CONCLUSION:(1)The alveolar bone volume in the bone augmentation area was higher immediately and 6 months after bone grafting than before bone grafting(P＜0.05)as well as was higher immediately after bone grafting than 6 months after bone grafting(P＜0.05).The alveolar bone height in the bone augmentation area was higher immediately and 6 months after bone grafting than before bone grafting(P＜0.05).The horizontal width of the alveolar bone at various sites in the bone augmentation area immediately and 6 months after bone grafting was higher than that before bone grafting(P＜0.05).(2)There was no significant difference in the volume of bone graft resorption at various sites in the bone augmentation area between males and females immediately and 6 months after bone grafting(P＞0.05).Pearson correlation analysis showed a positive correlation between age and the change in bone augmentation area volume immediately and 6 months after bone grafting,but the difference was not statistically significant(P＞0.05).(3)Twenty-five dental implants with completed implant restorations functioned normally,and the survival rate of the implants was 100％.To conclude,Onlay bone graft implant restoration in the upper anterior region can significantly improve insufficient bone with favorable outcomes.However,there is some amount of bone resorption in the bone augmentation area at 6 months after Onlay bone grafting and it is necessary to open up the second surgical area.Clinicians should consider different bone augmentation procedures in accordance with the specific circumstances.

Background/Aims: Liver transplantation (LT) following total hepatectomy is a life-saving treatment for hepatocellular carcinoma (HCC). The HCC recurrence after LT hinders the effectiveness of the procedure. The objective of this study is to develop a pre-operative risk stratification model based on a liquid biopsy. Methods: We conducted a comprehensive multi-omics study of 260 HCC patients from three centers, including clinical data, low-coverage whole-genome sequencing of cell-free DNA (cfDNA) from plasma, as well as whole-exome, single-nucleus RNA, and spatial transcriptomics from matched tumor and non-tumor tissues. Results: We identified cfDNA-derived copy number alteration (CNA) signatures associated with post-transplant recurrence. By integrating cfDNA-derived CNA profiles with single-cell transcriptomic data, we traced recurrence-associated cfDNA to a distinct subpopulation of malignant cells within the primary tumor. These cells were embedded in a pro-metastatic microenvironment of specialized endothelial subtypes and cancer-associated fibroblasts. Notably, most recurrence-associated lesions were detectable in cfDNA prior to liver transplantation (LT). Building on these insights, we developed the ZJU Criteria based on CNA fragments and tumor markers, a pre-LT risk prediction tool that integrates conventional clinical factors with cfDNA-derived CNA signatures, and validated it using internal and independent external cohorts. Conclusion Our findings suggest that post-transplant recurrence commonly originates from advanced subclones that emerge late during tumor evolution. The ZJU Criteria provides an accurate, non-invasive strategy that significantly improves pre-LT risk stratification and clinical decision-making for patients with HCC.

Objective To investigate the effect of berberine and its mechanism in delaying silica-induced lung injury via network pharmacology and molecular docking, followed by verification with animal experiments. Methods i) Targets of berberine and silicosis were obtained from multiple databases, and the common targets were identified. A protein-protein interaction network was constructed using the STRING database, and Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analyses were performed on the common targets via the DAVID database. Molecular docking was conducted using AutoDock software for validation. ii) Specific pathogen-free Wistar rats were randomly divided into five groups, with six rats in each group. Rats in the model group, pirfenidone group, and low- and high-dose berberine groups received a single non-exposure intratracheal instillation of 1.00 mL silica suspension at a mass concentration of 100 g/L, whereas rats in the control group received an equal volume of 0.9% sodium chloride solution. Rats in the pirfenidone group were administered with pirfenidone solution at a dose of 100 mg/kg body weight, and rats in the low- and high-dose berberine groups were administered with berberine solutions at doses of 100 and 200 mg/kg body weight, respectively. The remaining two groups received equal volumes of 0.9% sodium chloride solution. All treatments were administered by gavage once daily for 28 consecutive days from 24 hours after silica exposure. After intervention, rats in each group were sacrificed. Histopathological changes in lung tissues were observed, and the lung organ coefficient was detected. Serum malondialdehyde (MDA) was detected by colorimetry. Serum inflammatory cytokine were detected by enzyme-linked immunosorbent assay. The expression of fibrosis markers in lung tissues was detected by immunohistochemistry. The protein expression of phosphatidylinositol 3-kinase (PI3K), protein kinase B (AKT), and phosphorylated AKT (p-AKT) in lung tissues was determined by Western blot. Results i) Network pharmacology analysis identified 46 potential targets. The core targets included AKT1, tumor protein p53, caspase-3, matrix metalloproteinase-9, and albumin. GO enrichment analysis revealed that the targets related to the anti-fibrotic effect of berberine against silicosis were mainly enriched in biological processes including signal transduction, negative regulation of apoptosis, extracellular matrix degradation, and response to reactive oxygen species. KEGG enrichment analysis showed that berberine exerted anti-silicosis effects through multiple signaling pathways, such as the PI3K/AKT pathway, hypoxia-inducible factor-1 pathway, and advanced glycation end product (AGE)-receptor for AGE pathway. ii) Histopathological examination revealed that rats in the model group presented typical pulmonary fibrotic lesions. Pathological lung injury of rats was alleviated in all three intervention groups (pirfenidone group, low- and high-dose berberine group) compared with the model group. The improvement in the high-dose berberine group was superior to that in the low-dose berberine group and was comparable with that in the pirfenidone group. rats in the model group showed increased lung organ coefficient, serum MDA, interleukin-1β (IL-1β), and tumor necrosis factor-α (TNF-α) (all P<0.05), as well as increased expression of typeⅠcollagen (COLⅠ), α-smooth muscle actin (α-SMA) and PI3K, and p-AKT/AKT ratio in lung tissues (all P<0.05) when compared with the control group. The above indicators were lower in rats in both the low- and high-dose berberine groups than those in the model group (all P<0.05). Serum MDA, IL-1β, and TNF-α, as well as relative expression of COLⅠ and α-SMA in lung tissues, were lower in the high-dose berberine group than in the low-dose berberine group (all P<0.05). Conclusion Berberine may alleviate pulmonary inflammation and fibrosis in rats through regulation of the PI3K/AKT signaling pathway, thereby delaying the progression of silicosis.

BACKGROUND:Rev-erbα is involved in the regulation of inflammation,but pharmacological activation of Rev-erbα increases the risk for cardiovascular diseases.To reduce the relevant risk,an exploration on SR9009,a Rev-erbα agonist,combined with other drugs to relieve inflammation in skeletal myoblasts was conducted,laying the theoretical foundation for the treatment of inflammation-associated skeletal muscle atrophy. OBJECTIVE:To investigate the relationship of SR9009,indolepropionic acid and nuclear factor-κB signaling pathways in lipopolysaccharide-induced C2C12 myoblasts. METHODS:(1)C2C12 myoblasts were induced to differentiate in the presence of lipopolysaccharide(1 μg/mL).RNA-seq and KEGG pathway analysis were used to study signaling pathways.(2)C2C12 myoblast viability was assessed using the cell counting kit-8 assay to determine optimal concentrations of indolepropionic acid.Subsequently,cells were categorized into control group,lipopolysaccharide(1 μg/mL)group,SR9009(10 μmol/L)+lipopolysaccharide group,indolepropionic acid(80μmol/L)+lipopolysaccharide group,and SR9009+indolepropionic acid+lipopolysaccharide group.ELISA was employed to measure protein expression levels of interleukin-6 in the cultured supernatant.Real-time quantitative PCR were employed to measure mRNA expression levels of interleukin-6,tumor necrosis factor α,TLR4 and CD14.Western blot assay were employed to measure protein expression levels of NF-κB p65 and p-NF-κB p65.(3)After Rev-erbα was knocked down by siRNA,knockdown efficiency was assessed by RT-qPCR.And mRNA levels of interleukin-6 and tumor necrosis factor α were also measured. RESULTS AND CONCLUSION:Compared with the blank control group,lipopolysaccharide time-dependently inhibited myofibroblast fusion to form myotubes,the mRNA expression levels of interleukin-6 and tumor necrosis factor α were elevated,and the level of interleukin-6 in the cell supernatant was significantly increased.The results of KEGG pathway showed that the nuclear factor-κB signaling pathway was activated by lipopolysaccharide.Indolepropionic acid exhibited significant suppression of C2C12 myoblasts viability when its concentration exceeded 80 μmol/L.Indolepropionic acid and SR9009 inhibited the activation of NF-κB signaling pathway,thereby played an anti-inflammatory role,and suppressed the mRNA expression levels of interleukin-6,tumor necrosis factor α,TLR4 and CD14.Compared with the lipopolysaccharide group,the ratio of p-NF-κB p65/NF-κB p65 protein expression were downregulated.SR9009 combined with indolepropionic acid notably reduced lipopolysaccharide-induced inflammation,further downregulated the mRNA expression levels of interleukin-6,tumor necrosis factor α,TLR4 and CD14.The ratio of p-NF-κB p65/NF-κB p65 protein expression was significantly lower than that in the SR9009+lipopolysaccharide group or indolepropionic acid+lipopolysaccharide group.Rev-erbα increases time-dependently with lipopolysaccharide induction.The knockdown efficiency of Rev-erbα by siRNA reached over 58%,and lipopolysaccharide was added after Rev-erbα was successfully knocked down.Compared with the lipopolysaccharide group,the mRNA expression levels of interleukin-6 and tumor necrosis factor α were significantly up-regulated.These results conclude that Rev-erbα may act as a promising pharmacological target to reduce inflammation.SR9009 targeted activation of Rev-erbα combined with indolepropionic acid significantly inhibits the nuclear factor-κB signaling pathway and attenuates the inflammatory response of C2C12 myofibroblasts.Moreover,the combined anti-inflammatory effect is superior to that of the intervention alone.

BACKGROUND:Currently,the mandibular joint prosthesis manufactured at home and abroad needs to rely on screws to fix the condylar part of the prosthesis during the replacement process,and the retention hole is reserved to facilitate the operation during the operation.However,due to the lack of personalized jaw design,the reattachment plate may not fit the jaw,resulting in screw loosening and dislocation.Therefore,personalized condylar prosthesis replacement is of great value in the repair of the temporomandibular joint.OBJECTIVE:To design a personalized condylar prosthesis with an internal GYROID for mandibular condylar repair and reconstruction.METHODS:The GYROID structure was selected in the Rhinoceros 7 software with the single cell size of 6 mm and the wall thickness of 0.2,0.3,0.4,0.5,0.6,0.7,0.8 mm.The mechanical properties of the GYROID structure were analyzed by finite element method.3D printing of GYROID structural test specimens with different wall thickness(0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was performed to test the mechanical properties of the specimens through room temperature compression experiments.A wall thickness value conforming to the range of mandibular mechanical properties was selected through finite element analysis and room temperature compression test results.An adult male mandibular CT data were used for inverse modeling to design a condylar prosthesis with an internal GYROID.Finite element analysis was used to simulate the movement of the apical staggered position and the opposite-blade jaw position after condylar prosthesis replacement.RESULTS AND CONCLUSION:(1)The results of finite element analysis and room temperature compression experiment showed that the elastic modulus of the GYROID structure increased with the increase of wall thickness.The elastic modulus of the GYROID structure with wall thickness of 0.5-0.7 mm was within the range of the elastic modulus of the mandible(1.5-4.0 GPa).Therefore,the 6 mm monocellular GYROID structural model with a wall thickness of 0.6 mm was selected for the design of the condylar prosthesis.(2)The results of finite element analysis showed that the stress distribution of mandibular model was symmetrical.The stress distribution of the two types of occlusion was roughly the same,and the stress peak was not significantly different.The stress concentrated in the neck of the condylar prosthesis,and the stress on the replacement side was slightly larger than that on the healthy side.The maximum equivalent stress of the whole internal fixation model was 269.34 MPa,and the maximum equivalent stress of the screw was 20.14 MPa.The equivalent stress and equivalent strain values of the prosthesis were greater than that of the opposite edge jaw position when the tooth tip was interlaced.The equivalent stress and equivalent strain values of the screw were smaller than that of the opposite edge jaw position when the tooth tip was interlaced.(3)The results showed that the design and retention of the personalized GYROID condylar prosthesis were good,which was consistent with the mechanical conduction of the mandible.

BACKGROUND:Porous structures based on triple periodic minimal surfaces are one of the most promising orthopedic biostructures,among which the Gyroid structure is characterized by high specific surface area,high permeability,and zero mean curvature.OBJECTIVE:To screen the wall thickness interval of TC4 bionic bone scaffolds with 4 mm single-cell Gyroid structure matching the elastic modulus range of cancellous bone of the mandible through finite element analysis combined with mechanical compression test testing.METHODS:The finite element model of the 4 mm single-cell Gyroid structure with different wall thickths(0.1,0.2,0.3,0.4,0.5,0.6,0.7,and 0.8 mm)was established.The equivalent elastic modulus of the Gyroid structure was analyzed,and the wall thickness interval of the Gyroid structure matching the elastic modulus range of the maxillary resinous bone was selected with different wall thicknesses of 0.2,0.3,0.4,0.5,0.6,and 0.7 mm,respectively.According to finite element analysis screening results,the material selected was Ti6Al4V.Selective laser melting was used to prepare 3D printed Gyroid structure specimens.The surface treatment was carried out by large-grained sand blasting and acid etching.The elastic modulus and compressive strength of the specimen were tested by mechanical compression experiment.RESULTS AND CONCLUSION:(1)The finite element analysis results showed that the equivalent elastic modulus of the Gyroid structure increased with the increase of wall thickness,and the equivalent elastic modulus of the Gyroid structure with wall thickness of 0.2-0.7 mm was within the range of the elastic modulus of the spongy bone of the mandible(1.5-4.0 GPa),which was used for 3D printing of the Gyroid structure specimen.(2)The mechanical compression test results showed that the elastic modulus and compressive strength of the Gyroid structural specimen increased with the increase of wall thickness,and the elastic modulus of the Gyroid structural specimen with wall thickness of 0.3-0.5 mm was within the range of the elastic modulus of the cancellous bone of the mandible.The compressive strength of the Gyroid specimen with 0.3-0.7 mm wall thickness was consistent with the mechanical properties of the mandible.(3)The results show that the Gyroid structure of 0.3-0.5 mm wall thickness is compatible with the range of elastic modulus of the mandible.

Atrial fibrillation (AF) is the most common arrhythmia in clinical practice. It has a high prevalence and poor prognosis. The application of antiarrhythmic drugs and even surgery cannot completely treat the disease, and there are many sequelae. AF can be classified into the category of "palpitation" in Chinese medicine according to its symptoms. Acupuncture has a significant effect on AF. The authors find that an important mechanism of acupuncture in AF treatment is to regulate the cardiac vagus nerve. Therefore, this article intends to review the distribution and function of vagus nerve in the heart, the application and the regulatroy effect for the treatment of AF.
Atrial Fibrillation/physiopathology* ; Humans ; Acupuncture Therapy ; Vagus Nerve/physiology* ; Animals