OBJECTIVES: This study aimed to evaluate the clinical application value of in-situ crown reattachment technique combined with pulpotomy in the treatment of complicated crown-root fractures in young permanent anterior teeth. METHODS: A prospective study was conducted on 50 children with complicated crown-root fractures in young permanent anterior teeth, who were treated at the Pediatric Dentistry Department, Hospital of Stomatology, Xi'an Jiaotong University from June 2023 to June 2024. All patients underwent in-situ crown reattachment technique combined with pulpotomy. Clinical examinations, radiographic evaluations, and subjective satisfaction surveys (using a Likert scale of 1-10) were conducted at 1, 6, and 12 months postoperatively. Data were analyzed using SPSS 23.0. RESULTS: The loss-to-follow-up rate was 12% (6/50), with 44 cases completing the 12 months of evaluation. The clinical success rate was 93.18% (41/44), and the radiographic success rate was 97.73% (43/44). The subjective satisfaction scores showed a significant improvement in masticatory function from 7.03±0.52 at 1 month to 8.07±0.92 at 12 months postoperatively (P<0.05), whereas the scores for aesthetics, comfort, and quality-of-life impact showed no statistically significant differences (P>0.05). CONCLUSIONS In-situ crown reattachment technique combined with pulpotomy effectively treats complicated crown-root fractures in young permanent anterior teeth, demonstrating a high short-term clinical success rate, significantly improved masticatory function, and minimally invasive preservation of pulp vitality and root development potential. This technique provides an optimized treatment option for dental trauma in children, although its long-term efficacy requires further validation.
Humans ; Pulpotomy ; Tooth Fractures/surgery* ; Child ; Prospective Studies ; Male ; Female ; Tooth Root/injuries* ; Tooth Crown/injuries* ; Treatment Outcome ; Incisor/injuries* ; Child, Preschool

Tooth resorption is the degradation of dental hard tissue due to the continuous action of odontoclasts. External cervical resorption refers to the cervical resorption of a tooth due to destruction and/or defects of the periodontal ligament or subepithelial cementum. In this paper, we report a case of maxillary central incisor with external cervical resorption after dental trauma and orthodontic treatment. The resorption site and morphology of the affected tooth were thoroughly analyzed by cone beam computed tomography prior to the operation. Dental operating microscope and layered external repair with composite resin and bioceramics ensured a perfect restoration of the resorption, and the vital pulp was preserved. The 6-year follow-up indicated a favorable treatment effect.
Humans ; Composite Resins ; Cone-Beam Computed Tomography ; Incisor/surgery* ; Maxilla ; Microsurgery/methods* ; Tooth Resorption/etiology*

Dental trauma is a common oral condition in children. For single-type trauma to young permanent teeth, timely treatment often results in a high survival rate for both the teeth and the pulp. However, in cases of complex dental trauma or when supernumerary teeth are impacted near the apex of the injured tooth, the prognosis is less predictable. This article reports a case of root fracture in an immature maxillary permanent central incisor combined with impacted supernumerary tooth in the apical region. After supernumerary tooth extraction and pulp revascularization therapy, the case demonstrated a good treatment outcome over a nearly 10-year follow-up period.
Child ; Humans ; Incisor/injuries* ; Maxilla ; Tooth Extraction ; Tooth Fractures/complications* ; Tooth Root/injuries* ; Tooth, Impacted/surgery* ; Tooth, Supernumerary/surgery*

OBJECTIVE: To evaluate the changes of periodontal phenotype (width of keratinized gingiva, thickness and height of alveolar bone) of lower anterior teeth in patients with skeletal class Ⅲ malocclusion before and after the periodontal-orthodontic-orthognathic combined treatment. METHODS: In the study, 20 patients with skeletal class Ⅲ malocclusion (6 males and 14 females) completed the periodontal-orthodontic-orthognathic combined treatment were included from March 2017 to June 2022, with 39 central incisors, 40 lateral incisors and 40 canines. The mean age was (25.40±4.27) years (20-34 years). The mean follow-up time was (3.70±1.05) years from the beginning of periodontal corticotomy regenerative surgery (PCRS) to the end of the combined treatment. Cone-beam computed tomography (CBCT) was used to measure the thickness, area and height of alveolar bone by the same researcher, taken before the PCRS (T0), 6 months after the PCRS (T1), 12 months after the PCRS (T2), before the orthognathic surgery (T3), and after the periodontal-orthodontic-orthognathic combined treatment (T4). The periodontal clinical parameters were used to evaluate changes in the soft tissue by another researcher, measured before the PCRS (T0) and after the combined treatment (T4). Changes of soft and hard tissue were evaluated by the periodontal phenotype. RESULTS: The width of keratinized gingiva increased significantly (all P < 0.001) in lower anterior teeth, the central incisors, lateral incisors and canines increased by (1.82±1.57) mm, (2.03±1.48) mm and (2.05±1.27) mm, respectively. The proportion of thick periodontal biotype in the central and lateral incisors increased significantly (all P < 0.001), while the changes of periodontal biotypes in the lower canines were not obvious. The thickness of labial alveolar bone of lower anterior teeth all increased significantly after periodontal corticotomy regenerative surgery and the combined treatment (all P < 0.001). The area of labial alveolar bone of lower anterior teeth also increased significantly after the combined treatment (all P < 0.001). The whole area of labial and lingual alveolar bone of central and lateral incisors increased (P < 0.001), while the whole area of canines remained the same. All The height of the alveolar bone increased (all P < 0.001) on the labial side after the treatment. CONCLUSION The periodontal phenotypes of lower anterior teeth were significantly improved after the periodontal-orthodontic-orthognathic combined treatment in patients with skeletal Angle class Ⅲ malocclusion. The improvement was long-termly stable, and the periodontal risk was reduced.
Male ; Female ; Humans ; Malocclusion, Angle Class III/surgery* ; Oral Surgical Procedures ; Incisor ; Cone-Beam Computed Tomography/methods*

OBJECTIVE: To evaluate the decompensation effectiveness and alveolar bone remodeling of mandibular anterior teeth after preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusion using lateral cephalogram and cone-beam computed tomography (CBCT). METHODS: Thirty high-angle patients with skeletal class Ⅱ malocclusion who had received preoperative orthodontic treatment and orthognathic surgery in Peking University School and Hospital of Stomatology between Ja-nuary 2017 and August 2022 and had taken lateral cephalogram and CBCT before and after preoperative orthodontic treatment were selected. Items were measured with lateral cephalogram including: The lower central incisor (L1)-Frankfort plane angle (L1-FH), the L1-mandibular plane angle (L1-MP), the L1-nasion-supramental angle (L1-NB) and the vertical distance from the incisal edge of lower central incisor to NB line (L1-NB distance), etc. The incidence of dehiscence/fenestration and the length of dehiscence at labial side (d-La) and lingual side (d-Li) were measured using CBCT. Pearson correlation analysis was used to evaluate the correlation between the changes of d-Li of L1 and age, duration of preoperative orthodontic treatment and the cephalometric measurements before preoperative orthodontic treatment to screen out risk factors affecting the periodontal risk of preoperative orthodontic treatment in high-angle patients with skeletal class Ⅱ malocclusions. RESULTS: After preoperative orthodontic treatment, L1-FH, L1-MP, L1-NB and L1-NB distances changed by 11.56°±5.62°, -11.13°±5.53°, -11.57°±5.43° and (-4.99±1.89) mm, respectively, and the differences were all statistically significant (P < 0.05). Among the 180 measured mandibular anterior teeth, 45 cases with labial dehiscence/fenestration before preoperative orthodontic treatment (T0) had no longer labial dehiscence/fenestration after preope-rative orthodontic treatment (T1); 142 cases without lingual dehiscence/fenestration at T0 had lingual dehiscence/fenestration at T1. After preoperative orthodontic treatment, the d-La of lower lateral incisors (L2), lower canines (L3) and lower anterior teeth (L1+L2+L3) decreased by (0.95±2.22) mm, (1.20±3.23) mm and (0.68±2.50) mm, respectively, and the differences were statistically significant (P < 0.05); the d-Li of L1, L2, L3 and L1+L2+L3 increased by (4.43±1.94) mm, (4.53±2.35) mm, (3.19±2.80) mm and (4.05±2.46) mm, respectively, and the differences were statistically significant (P < 0.05). The increase of d-Li of L1 was positively correlated with L1-FH (r=0.373, P=0.042). CONCLUSION This study showed that high-angle patients with skeletal class Ⅱ ma-locclusion could achieve ideal decompensation effect of mandibular anterior teeth after preoperative orthodontic treatment with bilateral mandibular first premolars extracted, but the lingual periodontal risk of mandibular anterior teeth was increased. This risk could be correlated to L1-FH before preoperative orthodontic treatment, which should be paid more attention in the design of orthodontic-orthognathic surgical treatment.
Humans ; Malocclusion, Angle Class III ; Malocclusion, Angle Class II/surgery* ; Facial Bones ; Incisor ; Orthognathic Surgical Procedures ; Cone-Beam Computed Tomography ; Mandible

OBJECTIVES: To summarize the open-eruption technique of impacted anterior maxillary teeth, this study reports a technically improved operation on surgical exposure based on dental follicles and evaluates post-treatment periodontal health considering the effect of dental follicles. METHODS: Patients who underwent open-eruption technique with unilateral labially impacted maxillary central incisors were selected. The impacted teeth were assigned to the experimental group, and the contralateral unimpacted maxillary central incisors were assigned to the control group. In the surgical exposure, the new technique makes use of dental follicles to manage the soft tissue, so as to preserve soft tissue for better aesthetic results and healthier periodontal tissue. Tooth length, root length, alveolar bone loss, and alveolar bone thickness were recorded after the therapy. RESULTS: A total of 17 patients with unilateral maxillary central incisor impaction were successfully treated. The tooth length and root length of the two groups showed a statistically significant difference between the impacted and homonym teeth, with a shorter length in the impacted tooth (P<0.05). More labial alveolar bone loss was found in the experimental group compared with that in the control group (P<0.05). The outcomes of the cementoenamel junction width, pa- latal alveolar bone loss, and alveolar bone thickness did not indicate statistical significance between the experimental and control groups (P>0.05). CONCLUSIONS In the surgical exposure, the new technique uses dental follicles to manage the soft tissue and preserve it for better aesthetic results and healthier periodontal tissues.
Humans ; Tooth, Impacted/surgery* ; Incisor ; Alveolar Bone Loss/diagnostic imaging* ; Tooth Root ; Dental Sac ; Maxilla/surgery* ; Esthetics, Dental

OBJECTIVE: To explore the method of measuring root volume with cone-beam computed tomography (CBCT) three-dimensional reconstruction technology, and to study root length and root volume of upper and lower central incisors in patients with skeletal Class Ⅲ malocclusion treated by surgical orthodontic treatment. METHODS: Twenty patients with skeletal Class Ⅲ malocclusion undergoing surgical orthodontic treatment were selected. CBCT data at three time points, before decompensation treatment (T0), after decompensation treatment (before orthognathic surgery, T1), and the end of post-operative orthodontic treatment (T2) were collected. Three-dimensional reconstruction technology was used to measure the root length and root volume of the upper and lower central incisors (including total root volume, cervical root and apical root), calculate the percentage of reduction volume, and measure the distance of tooth movement after orthodontic treatment. Data were statistically analyzed by SPSS 20.0 software. Least significant difference (LSD) method was used for pair comparison between the groups subject to normal distribution, and non-parametric test was used for comparison between the groups not subject to normal distribution. The differences of root length and root volume of upper and lower incisors were compared, and the characteristics of root absorption were analyzed. RESULTS: Root length and root volume of the upper and lower central incisors were reduced during the surgical orthodontic treatment (P < 0.05) in cases. Both the root volume of cervical root and apical root were significantly reduced (P < 0.05), the reduction of apical root was more significant. The percentage of root volume reduction of the upper central incisor was (30.51±23.23)%, and lower central incisor (23.24±11.96)%. Compared with the upper central incisor, the root volume reduction amount and percentage of the lower central incisor were smaller, and apical root volume reduction of the upper central incisor was greater than that of the lower central incisor, which was statistically significant (P < 0.05). During pre-surgical orthodontic treatment, maxillary central incisor palatal moving was in a controlled tipping manner, and the mandibular central incisor tipped labially. CONCLUSION In patients with skeletal Class Ⅲ malocclusion, root length and total root volume of upper and lower central incisors decreased during surgical orthodontic treatment. Root volume measurement indicated that the cervical root also had root resorption. The difference in root resorption of the upper and lower central incisors might be related to the distance and direction of teeth movement. CBCT three-dimensional reconstruction will compensate for the limitation of root length measurement in evaluating root resorption.
Cone-Beam Computed Tomography/methods* ; Humans ; Incisor/diagnostic imaging* ; Malocclusion, Angle Class III/surgery* ; Maxilla/surgery* ; Root Resorption/etiology*

OBJECTIVE: To explore the applicability of integration between three-dimensional (3D) facial and dental data to evaluate the nasolabial morphology variation before and after the cross-arch fixed restoration of the maxillary implant-supported prostheses. METHODS: Twelve patients (4 women and 8 men), mean age (54.82±5.50) years (from 45 to 62 years) referred to the Department of Oral Implan-tology, Peking University School and Hospital of Stomatology, were selected and diagnosed with edentulous maxilla. For all the patients, 4 to 6 implants were inserted into the maxilla. Six months later, the final cross-arch fixed prostheses were delivered. The 3D facial images were collected before and after the final restoration. The 3D data of prostheses were also captured. All the 3D data were registered and measured in the same coordinate system. Then the displacement of all the landmarks [cheilion left (CHL), cheilion right (CHR), crista philtri left (CPHL), crista philtri right (CPHR), labrale supe-rius (LS), subnasale (SN), stomion (STO), upper incisor (UI), upper flange border of the prostheses (F-point, F)], and the variation of the distances between these landmarks (SN-LS, CPHR-CPHL, CHR-CHL, LS-STO) were analyzed and compared. RESULTS: The consistency test among three measurements of the length of F-SN indicated that the integration method of the dental prostheses and soft tissue had the good repetitiveness, ICC=0.983 (95%CI: 0.957-0.995). After wearing the final cross-arch maxillary implant-supported prostheses, all the landmarks on the soft tissue moved forward. The nasal base area changed minimally, and the shift of SN in the sagittal direction was only (0.61±0.44) mm. But the sagittal shift of LS was (3.12±1.38) mm. In the vertical direction, SN, LS, CPHL, and CPHR moved upward. But STO, CHL, and CHR moved downward a little. Except for the slight decrease of the length of philtrum (SN-LS), the length of CHL-CHR, CPHL-CPHR, and the height of upper lip were increased together (P < 0.01). In the direction of Z axis, the strong correlations were found not only between the movements of SN and F (r=0.904 3) but also between the movements of LS and UI (r=0.958 4). CONCLUSION The integration method of 3D facial and dental data showed good repetitiveness. And the strong correlations between the landmarks of prostheses and nasolabial soft tissue in the sagittal direction were found by this new method.
Female ; Humans ; Incisor ; Lip ; Male ; Maxilla/surgery* ; Middle Aged ; Mouth, Edentulous ; Prostheses and Implants

Impacted teeth are a frequent phenomenon encountered by every clinician. The artificial eruption of embedded teeth is the process of directing an impacted tooth into normal occlusion. This procedure is currently attracting attention, with the aim of finding the best technique to use according to each case. This article presents key information regarding impacted incisors, canines, and premolars. In addition, we describe the most common techniques to use for artificial eruption, the open and closed techniques. We review the literature concerning these techniques and outline how clinicians can manage every type of impacted tooth.
Bicuspid ; Incisor ; Surgery, Oral ; Tooth ; Tooth, Impacted

The purpose of this case report was to introduce the concept of orthodontic and orthopedic treatment for a growing patient with Tessier number 0 cleft. A 5-year-old boy patient with Tessier number 0 cleft presented congenitally missing maxillary central incisors (MXCI), a bony defect at the premaxilla, a constricted maxillary arch, an anterior openbite, and maxillary hypoplasia. His treatment was divided into three stages: management of the bony defect at the premaxilla and the congenitally missing MXCIs using a fan-type expansion plate, iliac bone grafting, and eruption guidance of the maxillary lateral incisors into the graft area for substitution of MXCIs; management of the maxillary hypoplasia using sequential facemask therapy with conventional and skeletal anchorage; and management of the remaining occlusal problems using fixed orthodontic treatment. The total treatment duration was 15 years and 10 months. Class I canine and Class II molar relationships and normal overbite and overjet were achieved at the end of treatment. Although the long-term use of facemask therapy resulted in significant protraction of the retrusive maxilla, the patient exhibited Class III profile because of continued mandibular growth. However, the treatment result was well maintained after 2 years of retention. The findings from this case suggest that interdisciplinary and customized approaches are mandatory for successful management of maxillary hypoplasia, bony defect, and dental problems in Tessier number 0 cleft. Moreover, considering the potential of orthognathic surgery or distraction osteogenesis, meticulous monitoring of mandibular growth until growth completion is important.
Bone Transplantation ; Child, Preschool ; Humans ; Incisor ; Male ; Maxilla ; Molar ; Open Bite ; Orthognathic Surgery ; Orthopedics* ; Osteogenesis, Distraction ; Overbite ; Transplants