Cutaneous sporotrichosis is a fungal infection caused by traumatic inoculation of Sporothrix. We aimed to study the clinical characteristics of human sporotrichosis, risk factors for infection, the yield of diagnostic methods and therapeutic response to standard clinical therapy. A cohort study of was performed. A total of 29 patients with clinical features suggestive of sporotrichosis were recruited within a one-year period from all public hospitals in Kedah, Malaysia. Majority were females (86%) who were housewives (69%). The most common comorbidities were diabetes mellitus (38%), hypertension (31%) and dyslipidaemia (21%), none was a significant risk factor for severity of infection. Mean duration of disease was 2±2 months. More than 2/3 of the patients (79%) had pet cats, 14(48%) recalled minor cat-inflicted trauma. Lymphocutaneous sporotrichosis (62%) was more common than fixed cutaneous type, affecting the upper limbs in 94%. Ulcerations and nodules were the main lesion morphology. Histopathology showed granulomatous inflammation in 72%, culture grew Sprorothrix in 55% and polymerase chain reaction (PCR) detected Sporothrix schenkii sensu stricto in 65%. Itraconazole was effective with 93% of patients achieving complete resolution with 4 months of therapy. Sporotrichosis in Malaysia remains endemic. Feline contact is the most important risk factor for infection. Diagnosis is best confirmed with tissue PCR while culture and histopathology are also useful. Sporothrix schenkii sensu stricto was the only species identified and itraconazole is an effective first line therapeutic agent.

Objective:To analyze the current status of red blood cell transfusion in very preterm infants (VPI) (gestational age at birth <32 weeks) from Chinese Neonatal Network (CHNN) in 2022.Methods:This cross-sectional study was based on the CHNN VPI cohort. It included 6 985 VPI admitted to CHNN 89 participating centers within 24 hours after birth in 2022. VPI with major congenital anomalies or those transferred to non-CHNN centers for treatment or discharged against medical advice were excluded. VPI were categorized based on whether they received red blood cell transfusions, their gestational age at birth, the type of respiratory support received during transfusion, and whether the pre-transfusion hemoglobin levels exceeded the thresholds. General characteristics, red blood cell transfusion rates, number of transfusions, timing of the first transfusion, and pre-transfusion hemoglobin levels were compared among different groups. The incidence of adverse outcomes between the group of VPI who received transfusions above the threshold and those who received transfusions below the threshold were compared. Comparison among different groups was conducted using χ2 tests, Kruskal-Wallis H tests, Mann-Whitney U test, and so on. Trends by gestational age at birth were evaluated by Cochran-Armitage tests and Jonckheere-Terpstra tests for trend. Results:Among the 6 985 VPI, 3 865 cases(55.3%) were male, with a gestational age at birth of 30.0 (28.6, 31.0) weeks and a birth weight of (1 302±321) g. Overall, 3 617 cases (51.8%) received red blood cell transfusion, while 3 368 cases (48.2%) did not. The red blood cell transfusion rate was 51.8% (3 617/6 985), with rates of 77.7% (893/1 150) for those born before 28 weeks gestational age and 46.7% (2 724/5 835) for those born between 28 and 31 weeks gestational age. A total of 9 616 times red blood cell transfusions were administered to 3 617 VPI, with 632 times missing pre-transfusion hemoglobin data, and 8 984 times included in the analysis. Of the red blood cell transfusions, 25.6% (2 459/9 616) were administered when invasive respiratory support was required, 51.3% (4 934/9 616) were receiving non-invasive respiratory support, while 23.1% (2 223/9, 616) were given when no respiratory support was needed. Compared to the non-transfusion group, the red blood cell transfusion group had a higher rate of pregnancy-induced hypertension in mothers, lower rates of born via cesarean section and mother′s antenatal steroid administration, smaller gestational age, lower birth weight, a higher proportion of small-for-gestational-age, multiple births, and proportions of Apgar score at the 5 th minute after birth ≤3 (all P<0.05). They were also less likely to be female, born in hospital or undergo delayed cord clamping (all P<0.01). Additionally, higher transport risk index of physiologic stability score at admission were observed in the red blood cell transfusion group ( P<0.001). The number of red blood cell transfusion was 2 (1, 3) times, with the first transfusion occurring at an age of 18 (8, 29) days, and a pre-transfusion hemoglobin level of 97 (86, 109) g/L. For VPI ≤7 days of age, the pre-transfusion hemoglobin levels for invasive respiratory support, non-invasive respiratory support, or no respiratory support, respectively, with no statistically significant differences between groups ( H=5.59, P=0.061). For VPI aged 8 to 21 days and≥22 days, the levels with statistically differences between groups (both P<0.01). Red blood cell transfusions above recommended thresholds were observed in all respiratory support categories at different stages of life, with the highest prevalence in infants aged 8 to 21 days and≥22 days who did not require respiratory support, at 90.1% (264/273) and 91.1%(1 578/1 732), respectively. The rate of necrotizing enterocolitis was higher in the above-threshold group ( χ2=10.59, P=0.001), and the duration of hospital stay was longer in the above-threshold group ( Z=4.67, P<0.001) compared to the below-threshold group. Conclusions:In 2022, the red blood cell transfusion rate was relatively high among VPI from CHNN. Pre-transfusion hemoglobin levels frequently exceeded recommended transfusion thresholds.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

For patients with a few remaining abutment teeth, traditional removable partial dentures and implant-supported fixed prostheses are common treatment options.However, removable dentures often struggle to provide stability, especially as bone resorption occurs over time. Implant-supported fixed prostheses offer longterm stability but are costly and affected by anatomical and medical factors. A newer option is implant-assisted removable partial dentures, which use a minimal number of implants combined with a surveyed crown. This approach enhances support, retention, and stability while reducing financial and surgical burdens. It also improves the prognosis of the remaining teeth, increases patient satisfaction, and enhances masticatory function, making it a promising alternative to conventional removable dentures.

This case report presents an 81-year-old edentulous female patient with congenital cleft lip and palate, rehabilitated with a maxillary obturator and a mandibular complete denture. A defect in the hard palate causes nasal leakage and hypernasalization of speech. Velopharyngeal insufficiency due to a defect in the soft palate causes reflux during swallowing and decreased clarity of pronunciation.The anatomical structures, such as Passavant’s ridge, were considered to prevent respiratory problems when impression taking. We achieved satisfactory results including velopharyngeal closure for pronunciation, mastication, and swallowing, as well as improved aesthetics. Therefore, we report the process and considerations of the treatment.

Telescopic denture has freedom in the positioning of abutments, ease of repair for abutment loss, and a simple structure. In this case, the patient initially treated with fixed prosthesis, but had to remove some implants due to diabetes. Given the number and location of remaining teeth and implants, the possibility of further tooth loss, and ease of cleansing, a decision was made to fabricate a telescopic denture. The telescopic copings were made with zirconia for aesthetic appearance. In patients with uncertain prognosis of additional implant placement, converting to a telescopic denture can provide successful outcome aesthetically and functionally.

Purpose: . The purpose of this study is to analyze the biomechanical differences in rotation angle-torque according to the type of implant and to compare the effects of contamination and sandblasting on the removal torque value (RTV) of abutment screws. Materials and methods: . For this study, an automated device for tightening and loosening implant screws was developed, and each 15 implant-abutment complexes of external and internal connection type were prepared, divided into three groups according to the surface treatment of the screw:control group (no treatment), experimental group-1 (artificial saliva contamination and chlorhexidine (CHX) rinsing), and experimental group-2 (artificial saliva contamination, CHX rinsing, and subsequent 50 µm Al 2 O 3 sandblasting). FirstRTV was measured for each group, followed by different post-treatment procedures for the screws, and then Second-RTV was measured. During the procedure, the removal torque value and rotation angle vs. time were recorded at a 20 data/s.A standardized protocol was followed for all the tightening and loosening procedures: screw was tightened with 30 Ncm torque and maintained for 5 s, and then rotated in the reverse direction until the torque value reached 0 Ncm. After 10min of rest period, the screws were loosened to initial point. Results: . Statistical analysis of measured data revealed that the internal connection type showed significantly higher First-RTV compared to the external connection type, however, no significant differences in Second-RTV were found. Both experimental groups 1and 2 showed a decrease in RTVs for both implant types, while the control group showed a decrease in RTV only for the internal type. The internal connection type required a significantly larger rotation angle during the tightening and loosening process. Conclusion . Within the limitations of this study, both artificial saliva contamination and CHX cleansing, as well as sandblasting, decreased RTV in both internal and external connection types. Internal connections were more susceptible to the effects of contaminants.

In cases of partially edentulous patients with insufficient remaining teeth, rotational movement of the denture occurs and prognosis of the remaining teeth is uncertain when restoring with a removable partial denture. Recently, implant-assisted removable partial dentures, where a small number of implants are placed and surveyed crowns are fabricated on the implants to be used as abutments, have been suggested. In this case, the patient had only one remaining tooth in the mandible and implants were placed in both posterior regions to be used as surveyed crowns to restore the patient with an implant-assisted removable partial denture. This approach improved the support, retention, and stability of the denture, resulting in functionally and aesthetically satisfactory outcomes.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.

In cases where a palatal defect resulting from oral cancer surgery is reconstructed using a free flap, dentures placed on the grafted site, lacking bone support, may experience stability problems due to insufficient support. This case report presents a 41-year-old male patient who underwent a sinus resection due to maxillary sinus carcinoma. The defect was reconstructed using a lateral thigh free flap.After a three-month interim prosthesis phase, a conventional removable partial denture was fabricated. Considering the condition of the remaining teeth and the patient’s age, natural tooth alteration was performed and lingual undercuts of the right posterior teeth were incorporated into the design to compensate for the lack of bone support. Digital occlusal analysis devices and 3D facial scanning were utilized to evaluate changes in occlusion and facial form, and the visualized results were presented to the patient to enhance understanding.