For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

For patients with a few remaining abutment teeth, traditional removable partial dentures and implant-supported fixed prostheses are common treatment options.However, removable dentures often struggle to provide stability, especially as bone resorption occurs over time. Implant-supported fixed prostheses offer longterm stability but are costly and affected by anatomical and medical factors. A newer option is implant-assisted removable partial dentures, which use a minimal number of implants combined with a surveyed crown. This approach enhances support, retention, and stability while reducing financial and surgical burdens. It also improves the prognosis of the remaining teeth, increases patient satisfaction, and enhances masticatory function, making it a promising alternative to conventional removable dentures.

In cases of partially edentulous patients with insufficient remaining teeth, rotational movement of the denture occurs and prognosis of the remaining teeth is uncertain when restoring with a removable partial denture. Recently, implant-assisted removable partial dentures, where a small number of implants are placed and surveyed crowns are fabricated on the implants to be used as abutments, have been suggested. In this case, the patient had only one remaining tooth in the mandible and implants were placed in both posterior regions to be used as surveyed crowns to restore the patient with an implant-assisted removable partial denture. This approach improved the support, retention, and stability of the denture, resulting in functionally and aesthetically satisfactory outcomes.

Objectives: The standard first-line treatment for Helicobacter pylori infection typically involves proton pump inhibitors, amoxicillin, and clarithromycin (PAC), yet the eradication success rates are not entirely satisfactory. Recognizing bismuth’s antibacterial properties and its potential to enhance antibiotic efficacy, this study compared the eradication success rates of a 7-day course of PAC with bismuth (PACB) versus PAC alone in patients with clarithromycin-susceptible H. pylori infections. Methods: We conducted a retrospective review at Eunpyeong St. Mary’s Hospital involving 499 patients with confirmed clarithromycin-susceptible H. pylori infection. These patients were treated either with PACB or PAC for 7 days. Clarithromycin resistance-associated point mutations were evaluated using reverse transcriptase polymerase chain reaction. Successful eradication was confirmed by a negative 13C-urea breath test. Results: Of the patients, 261 received PACB therapy, and 238 received PAC therapy. The intention-to-treat analysis showed eradication success rates of 82.8% (216/261) for PACB and 89.1% (212/238) for PAC (p=0.093). The per-protocol analysis revealed eradication rates of 85.3% (215/252) for PACB and 90.5% (210/232) for PAC (p=0.081). The incidence of adverse effects was similar between the two groups, with 41.3% (104/252) in the PACB group and 34.1% (79/232) in the PAC group (p=0.102). Conclusions Adding bismuth to the standard 7-day PAC regimen did not significantly increase eradication rates in patients with clarithromycin-susceptible H. pylori infections compared to PAC alone.

Background/Aims: Adiponectin, a hormone primarily produced by adipocytes, typically shows an inverse relationship with body mass index (BMI). However, some studies have reported a positive correlation between the two. Thus, this study aimed to examine the relationship between adiponectin level and BMI in diabetic patients, focusing on the impact of past obesity on current adiponectin levels. Methods: We conducted an observational study analyzing data from 323 diabetic patients at Kyungpook National University Hospital. Based on past and current BMIs, participants were categorized into never-obese (nn, n = 106), previously obese (on, n = 43), and persistently obese (oo, n = 73) groups based on a BMI threshold of 25 kg/m2. Adiponectin level and BMI were key variables. Kaplan–Meier analysis assessed their impact on all-cause mortality up to August 2023, with survival differences based on adiponectin quartiles and follow-up starting from patient enrollment (2010–2015). Results: The analysis revealed a significant inverse correlation between adiponectin level and past maximum BMI. The on group exhibited approximately 10% lower adiponectin levels compared to the nn group. This association remained significant after adjusting for current BMI, age, and sex, highlighting the lasting influence of previous obesity on adiponectin levels. Furthermore, survival analysis indicated that patients in the lowest adiponectin quartile had reduced survival, with a statistically significant trend (p = 0.062). Conclusions Findings of this study suggest that lower adiponectin levels, potentially reflecting past obesity, are associated with decreased survival in diabetic patients, underscoring a critical role of adiponectin in long-term health outcomes.

Background/Aims: Proprotein-converting enzyme subtilisin-kexin type 9 (PCSK9) inhibitors act more promptly and efficiently than statins and reduce the risk of cardiovascular events in patients with acute coronary syndrome (ACS). This study aimed to assess the short-term effects of perioperative administration of a single-dose PCSK9 inhibitor in patients with ACS. Methods: This study included 789 consecutive patients undergoing percutaneous coronary intervention (PCI) for ACS. The primary clinical endpoint was the occurrence of major adverse cardiovascular events (MACEs) within one month, including cardiac death, non-fatal myocardial infarction, unanticipated revascularization, stroke, stent thrombosis, and rehospitalization for ischemic causes or heart failure. Results: PCSK9 inhibitors were administered to 201 of 789 patients. MACEs occurred in eight patients (4.0%) in the treated group and 60 patients (10.2%) in the non-treated group for one month (hazard ratio 0.38, 95% confidence interval 0.18 to 0.80, p = 0.010). The benefit of PCSK9 inhibitors in terms of MACEs was greater in the subgroup of patients treated more than 1 hour before PCI than in the subgroup treated less than 1 hour before PCI or treated after PCI and in the non-treated group. Conclusions In patients undergoing PCI for ACS, the risk of MACEs was lower in those treated with perioperative single-dose PCSK9 inhibitors than in those in the untreated group. This benefit was especially noticeable in the subgroups treated > 1 hour before PCI than in those treated less than 1 hour before PCI or after PCI, regardless of the clinical presentation of ACS.

Purpose: Several types of dermal fillers have been recently introduced and used for penile augmentation (PA). However, few studies have compared outcomes after the injection of different fillers. This study aimed to compare the clinical outcomes of hyaluronic acid (HLA), polylactic acid (PLA), and polymethyl methacrylate (PMA) filler injections, which are the most commonly used for aesthetic purposes. Materials and Methods: This prospective study was conducted for 24 weeks after a filler injection by a surgeon between March 2017 and December 2021. Healthy adult men complaining of small penis were enrolled. Penile girth, satisfaction, and injection-associated adverse events (AEs) were assessed at baseline and 4, 12, and 24 weeks after injection. Results: Of the 301 men who received filler injections, 125, 134, and 42 received HLA, PLA, and PMA fillers, respectively. The augmentation effect was in the order of PMA, HLA, and PLA, respectively, at 24 weeks (PMA vs. HLA, p<0.001; HLA vs. PLA, p=0.006). Satisfaction levels increased significantly at 24 weeks in all groups (each with p<0.001). However, the increase in satisfaction levels was smaller in the PMA group (PMA vs. HLA or PLA, p<0.05, for both penile appearance and sexual life). No serious or systemic AEs were recorded. Filler injection-associated local AEs in the HLA, PLA, and PMA groups occurred in 9 (7.2%), 16 (11.9%), and 6 (14.3%) men, respectively. There was no significant difference in AEs among the groups (p=0.299). Conclusions The augmentative effect was greater in the PMA group than in the HLA and PLA groups, whereas the increase in satisfaction levels was smaller in the PMA group. Our study demonstrated the clinical course of different types of fillers and suggests that the filler type should be selected after detailed counseling considering individual characteristics and preferences.

For patients with edentulous maxillae, creating a prosthetic treatment plan involves considering anatomical factors, aesthetics, the patient’s financial situation, and oral hygiene capabilities. In this case, CAD-CAM technology was used to accurately plan implant placements for a full arch fixed restoration based on the design of the final prosthesis. A customized surgical guide ensured precise implant placement and a provisional restoration was created using CAD-CAM. The definitive prosthesis was then created based on the second provisional restoration that has been previously used and adjusted by the patient. This approach achieved an excellent functional and aesthetic outcome, highlighting the benefits of digital approach and its potential for further clinical applications.

For patients with a few remaining abutment teeth, traditional removable partial dentures and implant-supported fixed prostheses are common treatment options.However, removable dentures often struggle to provide stability, especially as bone resorption occurs over time. Implant-supported fixed prostheses offer longterm stability but are costly and affected by anatomical and medical factors. A newer option is implant-assisted removable partial dentures, which use a minimal number of implants combined with a surveyed crown. This approach enhances support, retention, and stability while reducing financial and surgical burdens. It also improves the prognosis of the remaining teeth, increases patient satisfaction, and enhances masticatory function, making it a promising alternative to conventional removable dentures.

In cases of partially edentulous patients with insufficient remaining teeth, rotational movement of the denture occurs and prognosis of the remaining teeth is uncertain when restoring with a removable partial denture. Recently, implant-assisted removable partial dentures, where a small number of implants are placed and surveyed crowns are fabricated on the implants to be used as abutments, have been suggested. In this case, the patient had only one remaining tooth in the mandible and implants were placed in both posterior regions to be used as surveyed crowns to restore the patient with an implant-assisted removable partial denture. This approach improved the support, retention, and stability of the denture, resulting in functionally and aesthetically satisfactory outcomes.