Intracranial growing teratoma syndrome (iGTS) is a rare phenomenon in patients with non-germinomatous germ cell tumor (NGGCT) after chemotherapy or radiotherapy. It manifests as paradoxical growth of teratomatous components, with multiple cystic lesions on cranial imaging despite normalized tumor markers. This paper presents a 22-year-old male with iGTS, diagnosed one month after chemotherapy against NGGCT. Initially diagnosed with presumptive pineal NGGCT causing obstructive hydrocephalus, the patient underwent endoscopic third ventriculostomy and extraventricular drainage with tumor biopsy followed by two chemotherapy cycles. Despite normalization of tumor markers, follow-up MRI showed increased tumor size with honeycomb-like cystic patterns. The patient underwent suboccipital craniotomy for tumor removal via combined telovelar and infratentorial supracerebellar approaches.The final pathology confirmed mature teratoma. However, postoperative bleeding and left thalamic infarction occurred, resulting in severe neurological deficits. Despite challenges, the patient eventually regained the ability to follow simple commands. To understand iGTS pathophysiology, several hypotheses, including the differentiation of immature components and the uninhibited growth of mature components induced by chemotherapy or radiotherapy, were explored. Surgical intervention remains as an ideal treatment, while clinical trials investigate chemotherapy options. Frequent imaging followups are crucial for early detection in iGTS for NGGCT patients.

Background: and Objective: We aimed to investigate long-term clinical and echocardiographic outcomes, including tricuspid valve durability, annular growth, and left ventricular reverse remodeling, after modified cone reconstruction in patients with Ebstein’s anomaly. Methods: This was a retrospective analysis of all pediatric patients who underwent modified cone reconstruction for Ebstein’s anomaly at a single tertiary center between January 2005 and June 2021. Results: A total of 14 pediatric patients underwent modified cone reconstruction for Ebstein’s anomaly; the median age was 5.8 years (range, 0.01–16.6). There were three patients (21.4%) with Carpentier type B, ten patients with Carpentier type C (71.4%), and one patient with Carpentier type D (7.1%). There was no early or late mortality, arrhythmia, or readmission for heart failure at a 10-year follow-up. There were no cases of more than mild tricuspid stenosis or more than moderate tricuspid regurgitation during the study period, except for one patient with severe tricuspid regurgitation who underwent reoperation. The z value for tricuspid valve annular size significantly decreased immediately after the operation (2.46 vs. −1.15, p<0.001).However, from 1 year to 7 years after surgery, the z values were maintained between −1 and +1.Left ventricular end-systolic volume, end-diastolic volume, and stroke volume increased after surgery and remained elevated until seven years postoperatively. Conclusions Ebstein’s anomaly in children can be repaired by modified cone reconstruction with low mortality and morbidity, good tricuspid valve durability, and annular growth relative to somatic growth.

Background: Awake craniotomy is a well-tolerated procedure for the resection of brain tumors residing within or close to the eloquent cortical areas. Monitored anesthesia care (MAC) is a dominant anesthetic approach for awake craniotomy; however, it is associated with inherent challenges such as desaturation and hypercapnia, which may lead to various complications. The prevention of respiratory insufficiency is important for successful awake craniotomy. As measures to avoid respiratory depression, the use of high-flow nasal cannula (HFNC) can improve patient oxygenation and monitor the oxygen reserve index (ORi) to detect hypoxia earlier. Case: We report two cases of awake craniotomy with MAC using HFNC and ORi. We adjusted the fraction of inspired oxygen of the HFNC according to the ORi level. The patient underwent successful awake craniotomy without a desaturation event or additional airway intervention. Conclusions Combined HFNC and ORi monitoring may provide adequate oxygen reserves in patients undergoing awake craniotomy.

Objective: To evaluate the impact of surgical simulation training using a three-dimensional (3D)-printed model of tetralogy of Fallot (TOF) on surgical skill development. Materials and Methods: A life-size congenital heart disease model was printed using a Stratasys Object500 Connex2 printer from preoperative electrocardiography-gated CT scans of a 6-month-old patient with TOF with complex pulmonary stenosis.Eleven cardiothoracic surgeons independently evaluated the suitability of four 3D-printed models using composite Tango 27, 40, 50, and 60 in terms of palpation, resistance, extensibility, gap, cut-through ability, and reusability of. Among these, Tango 27 was selected as the final model. Six attendees (two junior cardiothoracic surgery residents, two senior residents, and two clinical fellows) independently performed simulation surgeries three times each. Surgical proficiency was evaluated by an experienced cardiothoracic surgeon on a 1–10 scale for each of the 10 surgical procedures. The times required for each surgical procedure were also measured. Results: In the simulation surgeries, six surgeons required a median of 34.4 (range 32.5–43.5) and 21.4 (17.9–192.7) minutes to apply the ventricular septal defect (VSD) and right ventricular outflow tract (RVOT) patches, respectively, on their first simulation surgery. These times had significantly reduced to 17.3 (16.2–29.5) and 13.6 (10.3–30.0) minutes, respectively, in the third simulation surgery (p = 0.03 and p = 0.01, respectively). The decreases in the median patch appliance time among the six surgeons were 16.2 (range 13.6–17.7) and 8.0 (1.8–170.3) minutes for the VSD and RVOT patches, respectively. Summing the scores for the 10 procedures showed that the attendees scored an average of 28.58 ± 7.89 points on the first simulation surgery and improved their average score to 67.33 ± 15.10 on the third simulation surgery (p = 0.008). Conclusion Inexperienced cardiothoracic surgeons improved their performance in terms of surgical proficiency and operation time during the experience of three simulation surgeries using a 3D-printed TOF model using Tango 27 composite.

Objective: To evaluate the impact of surgical simulation training using a three-dimensional (3D)-printed model of tetralogy of Fallot (TOF) on surgical skill development. Materials and Methods: A life-size congenital heart disease model was printed using a Stratasys Object500 Connex2 printer from preoperative electrocardiography-gated CT scans of a 6-month-old patient with TOF with complex pulmonary stenosis.Eleven cardiothoracic surgeons independently evaluated the suitability of four 3D-printed models using composite Tango 27, 40, 50, and 60 in terms of palpation, resistance, extensibility, gap, cut-through ability, and reusability of. Among these, Tango 27 was selected as the final model. Six attendees (two junior cardiothoracic surgery residents, two senior residents, and two clinical fellows) independently performed simulation surgeries three times each. Surgical proficiency was evaluated by an experienced cardiothoracic surgeon on a 1–10 scale for each of the 10 surgical procedures. The times required for each surgical procedure were also measured. Results: In the simulation surgeries, six surgeons required a median of 34.4 (range 32.5–43.5) and 21.4 (17.9–192.7) minutes to apply the ventricular septal defect (VSD) and right ventricular outflow tract (RVOT) patches, respectively, on their first simulation surgery. These times had significantly reduced to 17.3 (16.2–29.5) and 13.6 (10.3–30.0) minutes, respectively, in the third simulation surgery (p = 0.03 and p = 0.01, respectively). The decreases in the median patch appliance time among the six surgeons were 16.2 (range 13.6–17.7) and 8.0 (1.8–170.3) minutes for the VSD and RVOT patches, respectively. Summing the scores for the 10 procedures showed that the attendees scored an average of 28.58 ± 7.89 points on the first simulation surgery and improved their average score to 67.33 ± 15.10 on the third simulation surgery (p = 0.008). Conclusion Inexperienced cardiothoracic surgeons improved their performance in terms of surgical proficiency and operation time during the experience of three simulation surgeries using a 3D-printed TOF model using Tango 27 composite.

A 59-year-old man presented for possible durable ventricular assist device (VAD) implantation. He had previously been diagnosed with congenitally corrected transposition of the great arteries, a ventricular septal defect, an atrial septal defect, pulmonary valve stenosis, and aortic valve regurgitation. In the previous 22 years, he had undergone palliative cardiac surgery 3 times. VAD implantation as a bridge to transplantation was planned. Owing to severe adhesions, mesocardia, a left ascending aorta, and moderate aortic regurgitation, we performed VAD implantation and aortic valve closure via a dual left thoracotomy and partial sternotomy.

Here we present a rare case of pulmonary arterial thrombosis associated with a ductus arteriosus aneurysm that caused severe pulmonary stenosis. A 5-day-old newborn was admitted to our hospital for the evaluation of an intracardiac mass-like lesion found after the detection of a cardiac murmur. Echocardiography and heart computed tomography revealed a mass-like lesion measuring 8.1 mm in diameter across the distal main pulmonary artery to the proximal left pulmonary artery resulting in localized severe stenosis of the left pulmonary artery. Left pulmonary artery angioplasty for surgical resection of the thrombus revealed that the mass was adherent to the proximal part of the left pulmonary artery anterior wall and extended to the ductus arteriosus. Histological examination of the mass showed an old thrombus with dystrophic calcification. Five months after surgery, follow-up echocardiography showed that the left pulmonary artery peak pressure gradient had decreased but the proximal left pulmonary artery stenosis remained. Cardiac catheterization and balloon angioplasty suc cessfully relieved the pulmonary stenosis.

BACKGROUND: This study aimed to determine the effect of a multidisciplinary approach on the birth rate of fetuses with prenatally diagnosed congenital heart diseases (CHDs). METHODS: Among the fetuses of 724 gravidas who underwent fetal echocardiography in Samsung Medical Center from January 2013 to June 2017, 463 fetuses with normal cardiac structure, arrhythmia or simple left-to-right shunt were excluded, and the remaining 261 were included in the study. The subjects were subdivided into groups based on whether they were consulted multidisciplinarily, that is, consulted simultaneously by pediatric cardiologists, obstetricians and pediatric cardiac surgeons or not. They were also categorized based on the initial fetal echocardiogram results. RESULTS: Among the fetuses in the multidisciplinary group, 64.5% of the fetuses were given birth to, and the proportion was not different from that in the non-multidisciplinary group (68.6%, P = 0.48). The delivery rate in the multidisciplinary consultation group were 69.2% in the transposition of the great arteries group, 63.6% in the tetralogy of Fallot group, 68.8% in the pulmonary atresia or interrupted aortic arch group, 62.5% in the coarctation of aorta group, 60.0% in the atrioventricular septal defect group, 70.0% in the functional single ventricle group, and 55.6% in the hypoplastic left heart syndrome group; there were no significant differences between the 10 echocardiogram groups. However, when the subjects were categorized into Fontan repair group and biventricular repair group, the Fontan repair group showed a significant increase in the likelihood of delivery when a multidisciplinary approach was taken (P = 0.035). CONCLUSION: When a fetus was diagnosed with a CHD where Fontan repair should be considered, a multidisciplinary approach resulted in increased possibility of delivery.
Aorta, Thoracic ; Aortic Coarctation ; Arrhythmias, Cardiac ; Arteries ; Birth Rate ; Echocardiography ; Fetus ; Heart Defects, Congenital ; Heart Diseases ; Hypoplastic Left Heart Syndrome ; Parturition ; Prenatal Diagnosis ; Pulmonary Atresia ; Surgeons ; Tetralogy of Fallot

Bilateral sagittal split ramus osteotomy (BSSRO) is generally indicated for mandibular setback, to improve occlusion, masticatory function, and aesthetics by altering the mandibular position. However, BSSRO narrows the pharyngeal airway and increases airway resistance, resulting in postoperative respiratory disturbances during emergence from anesthesia. Oxygen delivery system via high-flow nasal cannula (HFNC) has been known to improve airway patency and oxygenation via low-level positive pressure as well as reduce the respiratory load. We report a case of postoperative respiratory disturbance, following a large mandibular setback, despite nasotracheal extubation in the fully awake patient. Respiratory disturbance was successfully controlled after oxygen delivery via HFNC until self-respiration was completely restored. Therefore, the use of HFNC may facilitate the control of postoperative respiratory disturbances induced by anatomical changes in upper airway after BSSRO surgery.
Airway Resistance ; Anesthesia ; Catheters* ; Dyspnea ; Esthetics ; Humans ; Orthognathic Surgical Procedures ; Osteotomy, Sagittal Split Ramus* ; Oxygen ; Oxygen Inhalation Therapy ; Respiratory Distress Syndrome, Adult

This case report concerns a young patient with an extremely rare combination of d-transposition of the great arteries (d-TGA) and anomalous origin of the right subclavian artery. In our patient, the right subclavian artery originated from the pulmonary artery, which is why he did not show reversed differential cyanosis. We conclude that the presence of an aortic arch anomaly should be considered in patients with d-TGA who do not present with reversed differential cyanosis. A further imaging work-up, including computed tomography or magnetic resonance imaging, might be helpful.
Aorta, Thoracic ; Arteries* ; Cyanosis ; Humans ; Magnetic Resonance Imaging ; Pulmonary Artery ; Subclavian Artery*