Purpose: 11C-Methionine PET/CT is a promising method for detecting parathyroid lesions in patients with primary hyperparathyroidism (PHPT). We aimed to determine the diagnostic ability and correlation of digital 11C-Methionine PET/CT for parathyroid lesions in patients with PHPT, particularly in cases where standard imaging methods yielded inconclusive results. Methods: This retrospective analysis was conducted on patients diagnosed with PHPT who underwent digital 11C-Methionine PET/CT imaging because of ambiguous results on standard imaging work-up ( 99m Tc-MIBI parathyroid scan and/or neck ultrasonography). Quantitative 11C-Methionine PET/CT parameters, including maximum standardized uptake value (SUVmax), mean SUV (SUVmean), peak SUV (SUVpeak), parathyroid methionine volume (PMV), and whole methionine uptake(WMU: PMV multiplied by SUVmean) were calculated with various thresholds, and their correlations with biochemical andpathologic parameters were investigated. Results: This study included 22 consecutive patients (10 men and 12 women) with a median age of 64.0 years. The lesion detection rate and sensitivity of digital 11C-Methionine PET/CT were 81.8% (18/22) and 100.0% (18/18), respectively.Quantitative analysis revealed that serum PTH (r = 0.490, P = 0.039) and serum calcium (r = 0.583, P = 0.011) were signifi-cantly correlated with PMV50%. Conclusion Digital 11C-Methionine PET/CT offers good performance in the detection of parathyroid lesions in PHPT patients with inconclusive standard imaging work-up. The volume parameter of PMV50% significantly correlated biochemi-cal parameters and can serve as a complementary diagnostic tool.

BACKGROUND/OBJECTIVES: Particulate matter 2.5 (PM2.5) exposure can promote epithelialmesenchymal transition (EMT) in human retinal pigment epithelial (RPE) cells. The flowers of Tagetes erecta Linn, commonly known as marigold, are rich in diverse flavonoids and carotenoids and play a significant role in preventing cellular damage induced by oxidative stress, but the role of their extracts in RPE cells has not been reported. This study aimed to evaluate the influence of an ethanol extract of T. erecta Linn flower (TE) on PM2.5-induced EMT processes in RPE ARPE-19 cells.MATERIALS/METHODS: To investigate the protective effect of TE against ARPE-19 cell damage following PM2.5 treatment, cells were exposed to TE for 1 h before exposure to PM2.5 for 24 h. We investigated whether the efficacy of TE on suppressing PM2.5-induced EMT was related to antioxidant activity and the effect on the expression changes of factors involved in EMT regulation. Additionally, we further explored the role of intracellular signaling pathways associated with EMT inhibition. RESULTS: TE significantly blocked PM2.5-induced cytotoxicity while effectively preventing mitochondrial dysfunction, increased reactive oxygen species (ROS) generation, and mitochondrial membrane potential disruption. TE inhibited PM2.5-induced EMT and inflammatory response by suppressing the ROS-mediated transforming growth factor-β/ suppressor of mothers against decapentaplegic/mitogen-activated protein kinases signaling pathway. CONCLUSION Our results suggest that marigold extract is a highly effective in protection against PM2.5-induced eye damage.

The loss of occlusal vertical dimension due to multiple tooth loss and wear can lead to a collapsed occlusion, resulting in both functional and aesthetic problems.This case report describes a patient exhibiting mandibular prognathism as a result of vertical dimension loss. A comprehensive oral rehabilitation involving an increase in vertical dimension was required. A minimal number of implants were placed, and implant-supported surveyed crowns were fabricated, allowing for the design of a stable and retentive implant-assisted removable partial denture. The treatment resulted in both functional and aesthetic improvements. The anterior rotational pattern of the mandible was alleviated, and the implant-assisted partial denture provided clinically high levels of patient satisfaction. This case report details the diagnostic and therapeutic processes involved in this treatment.

Crossbite refers to a condition where there are remaining teeth, but none of the teeth are in occlusal contact, resulting in the loss of vertical support. When posterior vertical stop is lost, it is important to appropriately restore this support and create a harmonious occlusal plane. In this case, the patient had lost posterior support but declined surgical intervention due to a history of osteoporosis and the associated risk of medication-related osteonecrosis of the jaw (MRONJ). To restore the vertical space required for prosthetic rehabilitation, the vertical dimension was increased. The missing posterior teeth were replaced using removable partial dentures. Cross-mounting was performed, and the metal copings of the surveyed crowns and the framework of the final removable partial denture were 3D printed. After the treatment was completed, the patient expressed satisfaction with both functions and aesthetics. Regular follow-ups were conducted to monitor oral hygiene and occlusal stability.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Cerebellar ataxia, neuropathy, and vestibular areflexia syndrome (CANVAS) is a neurodegenerative disorder caused by a biallelic expansion of pentanucleotide repeats in the RFC1 gene. Previous studies have reported up to 22% of patients with late-onset ataxia harbor this pathogenic repeat expansion. Despite its relatively high prevalence, CANVAS is often underdiagnosed because the disease is not well recognized and genetic testing is not performed in clinical practice. Here, we present a patient with characteristic clinical features, confirmed by genetic testing.

Background: Barriers to treatment with intravenous thrombolysis (IVT) for patients with acute ischemic stroke (AIS) in South Korea remain incompletely characterized. We analyze a nationwide prospective cohort to determine patient-level features associated with delayed presentation and non-treatment of potential IVT-eligible patients. Methods: We identified consecutive patients with AIS from 01/2011 to 08/2023 from a multicenter and prospective acute stroke registry in Korea. Patients were defined as IVT candidates if they presented within 4.5 hours from the last known well, had no lab evidence of coagulopathy, and had National Institute of Health Stroke Scale (NIHSS) ≥ 4. Multivariable generalized linear mixed regression models were used to investigate the associations between their characteristics and the IVT candidates or the use of IVT among the candidates. Results: Among 84,103 AIS patients, 41.0% were female, with a mean age of 69 ± 13 years and presentation NIHSS of 4 [interquartile range, 1–8]. Out of these patients, 13,757 (16.4%) were eligible for IVT, of whom 8,179 (59.5%) received IVT. Female sex (adjusted risk ratio [RR], 0.90; 95% confidence interval [CI], 0.86–0.94) and lower years of education (adjusted RR, 0.90; 95% CI, 0.84–0.97 for 0–3 years, compared to ≥ 13 years) were associated with a decreased likelihood of presenting as eligible for IVT after AIS; meanwhile, young age (adjusted RR, 1.12; 95% CI, 1.01–1.24 for ≤ 44 years, compared to 75–84 years) was associated with an increased likelihood of being an IVT candidate. Among those who were eligible for IVT, only age was significantly associated with the use of IVT (adjusted RR, 1.09; 95% CI, 1.03–1.16 for age 65–74 and adjusted RR, 0.83; 95% CI, 0.76–0.90 for ≥ 85 years, respectively). Conclusion Most patients with AIS present outside IVT eligibility in South Korea, and only 60% of eligible patients were ultimately treated. We identified increased age, female sex and lower education as key features on which to focus interventions for improving IVT utilization.

Echinococcosis, caused by the tapeworm Echinococcus, is rare in Korea and is primarily imported from endemic areas. We report a case of a 37-year-old Korean man with multiple large hepatic cysts, initially diagnosed as simple cysts at a local clinic in 2018. The patient had lived in Oman, an endemic area, for several months in 2016. Upon referral to a tertiary hospital in 2023, due to progressive cyst enlargement, liver magnetic resonance imaging revealed three large cysts with a water lily sign. Serum IgG against Echinococcus was positive by enzyme-linked immunosorbent assay. After diagnosis of echinococcosis, treatment with albendazole and puncture-aspiration-injection-reaspiration (PAIR) was performed.Microscopic and molecular analysis of cyst aspirates confirmed Echinococcus granulosus infection. Follow-up computed tomography demonstrated a reduction in cyst size, yet the emergence of a new right pleural effusion and consolidation in the left lower lobe of the lung necessitated the continuation of albendazole therapy. This case highlights the importance of thorough travel history, imaging findings, and the effectiveness of PAIR combined with albendazole in treating imported echinococcosis.

This study aimed to assess the utilization trends of pulmonary rehabilitation (PR) among lung cancer patients in Korea using the National Health Insurance Service (NHIS) database (2017 to 2021). PR was introduced and covered under the NHIS in 2016, primarily for chronic obstructive pulmonary disease, but recent evidence suggests its benefits for lung cancer patients. Data extraction was based on Korea Informative Classification of Diseases 8th revision codes C33 and C34, with PR prescriptions identified by codes MM440 and MM290.Descriptive statistical analysis was performed, and propensity score matching was used for comparison between PR and non-PR groups. Results showed a significant increase in PR utilization, with the number of patients receiving PR (MM440) rising from 1,002 in 2017 to 3,723 in 2021, indicating a 3.7-fold increase. However, the proportion of patients receiving PR remained low at 2.9% in 2021. Enhanced access to PR services and improved evaluation strategies are essential for optimizing patient outcomes.