Background: The 16S rRNA-targeted next-generation sequencing (NGS) has been widely used as the primary tool for microbiome analysis. However, whether the sequenced microbial diversity absolutely represents the original sample composition remains unclear. This study aimed to evaluate whether 16S rRNA gene-targeted NGS accurately captures bacterial community composition. Methods: Mock communities were constructed using equal amounts of DNA from 18 bacterial strains in three formats: genomic DNA, recombinant plasmids, and polymerase chain reaction (PCR) templates. The V3V4 region of the 16S rRNA gene was amplified and sequenced using the Illumina MiSeq. Results: Data regression analysis revealed that the recombinant plasmid produced more accurate and precise correlation curve than that by the gDNA and PCR products, with a slope closest to 1 (1.0082) and the highest R² value (0.9975). Despite the same input amount of bacterial DNA, the NGS read distribution varied across all three mock communities. Using multiple regression analysis, we found that the guanine-cytosine (GC) content of the V3V4 region, 16S rRNA gene, size of gDNA, and copy number of 16S rRNA were significantly associated with the NGS output of each bacterial species. Conclusion This study demonstrated that recombinant plasmids are the preferred option for quality control and that NGS output is biased owing to certain bacterial characteristics, such as %GC content, gDNA size, and 16S rRNA gene copy number. Further research is required to develop a system that compensates for NGS process biases using mock communities.

Background: The 16S rRNA-targeted next-generation sequencing (NGS) has been widely used as the primary tool for microbiome analysis. However, whether the sequenced microbial diversity absolutely represents the original sample composition remains unclear. This study aimed to evaluate whether 16S rRNA gene-targeted NGS accurately captures bacterial community composition. Methods: Mock communities were constructed using equal amounts of DNA from 18 bacterial strains in three formats: genomic DNA, recombinant plasmids, and polymerase chain reaction (PCR) templates. The V3V4 region of the 16S rRNA gene was amplified and sequenced using the Illumina MiSeq. Results: Data regression analysis revealed that the recombinant plasmid produced more accurate and precise correlation curve than that by the gDNA and PCR products, with a slope closest to 1 (1.0082) and the highest R² value (0.9975). Despite the same input amount of bacterial DNA, the NGS read distribution varied across all three mock communities. Using multiple regression analysis, we found that the guanine-cytosine (GC) content of the V3V4 region, 16S rRNA gene, size of gDNA, and copy number of 16S rRNA were significantly associated with the NGS output of each bacterial species. Conclusion This study demonstrated that recombinant plasmids are the preferred option for quality control and that NGS output is biased owing to certain bacterial characteristics, such as %GC content, gDNA size, and 16S rRNA gene copy number. Further research is required to develop a system that compensates for NGS process biases using mock communities.

The application area of biportal endoscopic spine surgery (BESS) is gradually expanding. Compared with conventional fusion surgery, transforaminal interbody fusion (TLIF) using BESS (BESS-TLIF) has the advantages of less bleeding, minimal postoperative pain, and faster recovery. This technical note highlights its application in managing complex conditions such as scar tissue adhesion, altered anatomy, and implant removal, common in reoperations. The method focuses on precise dissection, endoscopic visualization, and careful tissue handling to ensure effective decompression and stabilization. Three representative cases, including reoperations for recurrent disc herniation, adjacent segment disease (ASD) following prior fusion, and ASD with nonunion of the prior fusion site requiring fusion extension, were described. All three cases exhibited clinical improvement following surgery. BESS is an effective and safe method for spinal revision surgery not only in simple decompression surgery but also in cases that required fusion surgery. As BESS is advancing, its role in complex spinal surgeries is expected to expand, potentially setting new standards in minimally invasive spine surgery.

This paper discusses a rare case of a 49-year-old female diagnosed with a central nervous systemisolated neoplasm with histiocytic features, classified as histiocytic neoplasm, not otherwise specified (NOS). Despite comprehensive histopathological and genetic studies, accurately diagnosing the case proved challenging. Initial surgical findings and frozen biopsy suggested a low-grade glioma; however, subsequent immunohistochemistry and genetic analysis excluded known histiocytic subtypes such as ALK-positive histiocytosis and Erdheim-Chester disease. The patient’s condition improved following occupational rehabilitation therapy for right upper motor weakness, as well as anticonvulsant and radiation therapy, and her neurological condition remains stable. This case underscores the diagnostic challenges of Histiocytic Neoplasms and the necessity for interdisciplinary collaboration and sophisticated diagnostic techniques.

Purpose: Considering the high disease burden and unique features of Asian patients with breast cancer (BC), it is essential to have a comprehensive view of genetic characteristics in this population. An institutional targeted sequencing platform was developed through the Korea Research-Driven Hospitals project and was incorporated into clinical practice. This study explores the use of targeted next-generation sequencing (NGS) and its outcomes in patients with advanced/metastatic BC in the real world. Materials and Methods: We reviewed the results of NGS tests administered to BC patients using a customized sequencing platform—FiRST Cancer Panel (FCP)—over 7 years. We systematically described clinical translation of FCP for precise diagnostics, personalized therapeutic strategies, and unraveling disease pathogenesis. Results: NGS tests were conducted on 548 samples from 522 patients with BC. Ninety-seven point six percentage of tested samples harbored at least one pathogenic alteration. The common alterations included mutations in TP53 (56.2%), PIK3CA (31.2%), GATA3 (13.8%), BRCA2 (10.2%), and amplifications of CCND1 (10.8%), FGF19 (10.0%), and ERBB2 (9.5%). NGS analysis of ERBB2 amplification correlated well with human epidermal growth factor receptor 2 immunohistochemistry and in situ hybridization. RNA panel analyses found potentially actionable and prognostic fusion genes. FCP effectively screened for potentially germline pathogenic/likely pathogenic mutation. Ten point three percent of BC patients received matched therapy guided by NGS, resulting in a significant overall survival advantage (p=0.022), especially for metastatic BCs. Conclusion Clinical NGS provided multifaceted benefits, deepening our understanding of the disease, improving diagnostic precision, and paving the way for targeted therapies. The concrete advantages of FCP highlight the importance of multi-gene testing for BC, especially for metastatic conditions.

Purpose: Proximal gastrectomy is an alternative to total gastrectomy (TG) for early gastric cancer (EGC) treatment in the upper stomach. However, its benefits in terms of perioperative and long-term outcomes remain controversial. The aim of this study was to compare the perioperative, body compositional, nutritional, and survival outcomes of patients undergoing proximal gastrectomy with double-tract reconstruction (PG-DTR) and TG for pathological stage I gastric cancer in upper stomach. Materials and Methods: The study included 506 patients who underwent gastrectomy for pathological stage I gastric cancer in the upper stomach between 2015 and 2019. Clinicopathological, perioperative, body compositional, nutritional, and survival outcomes were compared between the PG-DTR and TG groups. Results: The PG-DTR and TG groups included 197 (38.9%) and 309 (61.1%) patients, respectively. The PG-DTR group had a lower rate of early complications (p=0.041), lower diagnosis rate of anemia and vitamin B12 deficiency (all p < 0.001), and lower replacement rate of iron and vitamin B12 compared to TG group (all p < 0.001). The PG-DTR group showed reduced incidence of sarcopenia at 6-months postoperatively, preserved higher amount of visceral fat after surgery (p=0.032 and p=0.040, respectively), and showed a higher hemoglobin level (p=0.007). Oncologic outcomes were comparable between the groups. Conclusion The PG-DTR for EGC located in the upper stomach offered advantages of fewer complications, lower incidence of anemia and vitamin B12 deficiency, less decrease in visceral fat volume, and similar survival compared to TG. Consequently, PG-DTR may be considered a superior alternative treatment option to TG.

Background: This study explores effective fixation methods for Pauwel type III femoral neck fractures by evaluating the biomechanical benefits of adding a screw to the Femoral Neck System (FNS). Methods: Computed tomography (CT) scans of an 82-year-old female patient with an intertrochanteric fracture were used to establish a finite element femur model with heterogeneous material properties. Finite element models of Pauwel type III fractures were created with and without an additional screw. The central and inferior trajectories of the FNS bolt were examined separately and combined with an additional screw for virtual fixation. Walking and stair-climbing loads were applied. Results: With the addition of a screw, both peak maximum and minimum principal strains consistently stayed comparable or decreased in models with both central and inferior bolt trajectories, while the volume of elements with principal strain exceeding 1% decreased by more than half. The peak von Mises stress observed in the implants ranged from 215.7 to 359.3 MPa, remaining below the titanium alloy's yield strength of 800 MPa. For normal walking, the addition of a screw to the central bolt trajectory model decreased the fracture gap by 50.6% and reduced sliding distance by 8.6%. For the inferior bolt trajectory, the gap was reduced by 57.9% and sliding distance by 25.0%.Under stair-climbing conditions, these improvements were also evident; the central trajectory model saw a halved fracture gap and a 7.9% decrease in sliding distance, while the inferior trajectory model experienced a 55.7% gap reduction and a 27.2% decrease in sliding distance. The additional screw increased the area ratio of the fracture site experiencing interfragmentary compression 34%–39%, while the additional screw alleviated peak interfragmentary compression by 12%–18% under both normal walking and stair-climbing conditions. Conclusions The addition of a screw reduced the fracture gap, sliding distance, and peak interfragmentary compression, while increasing the area ratio of interfragmentary compression under both walking and stair-climbing loads, regardless of the FNS bolt trajectory, suggesting a better mechanical environment for fracture healing.

Background: This study aimed to compare the intraoperative stability and early clinical outcomes of 40-mm diameter dual mobility (DM)-total hip arthroplasty (THA) with 36-mm ceramic head (large head) THA in active elderly patients with hip fractures. Methods: A prospective randomized controlled trial was conducted from May 2022 to December 2022. Inclusion criteria were as follows: age ≥ 60 years, displaced femoral neck fracture, Koval grade 1 or 2, planned 54-mm acetabular component, and over 1-year follow-up. Intraoperative stability tests were performed on all patients (internal rotation at 45°, 60°, and 90° of hip fracture). Functional outcomes (Harris Hip Score and University of California, Los Angeles [UCLA] Score) were evaluated at 6 weeks and 3 months postoperatively. Gait analysis using artificial intelligence (AI) techniques was conducted at 3 months postoperatively. Results: The study included 36 DM-THA patients (mean age, 69.6 ± 2.2 years; 44% women) and 37 large head THA patients (mean age, 69.6 ± 1.2 years; 64% women). No statistically significant differences were observed in functional outcomes and hip range of motion between the 2 groups. However, there was a significant difference in the gait speed and stance-swing phase of the large head THA group and the DM-THA group: the DM-THA group demonstrated superior gait speed (2.85 ± 0.83 kph vs. 2.04 ± 1.04 kph, p = 0.003) and higher stance phase ratios (operated side: 63.57% ± 3.82% vs. 48.19% ± 5.50%, p < 0.001; opposite side: 62.77% ± 2.27% vs. 49.93% ± 6.94%, p < 0.001). In the stability test at 90° of hip flexion, the DM-THA group had a measurement of 48.40° ± 5.17°, while the large head THA group had a measurement of 30.94° ± 2.98° (p = 0.012). Despite the lack of statistical significance, the intraoperative stability test showed the dislocation angle was notably different between the groups in the hip flexion position of 60° (51.60° ± 6.09° in the DM-THA group and 40.00° ± 2.80° in the large head THA group, p = 0.072). Conclusions Superior results were observed in the intraoperative stability test and early recovery of gait after DM-THA compared to large head THA. We believe that DM-THA can be a useful surgical option for THA in elderly patients with hip fractures.

Background: Several studies have investigated the morphological risk factors contributing to posterior cruciate ligament (PCL) injury. However, no study has focused on the injury patterns of intrasubstance tears or tibial avulsion fractures in relation to morphologies and regional bone quality. This study aimed to investigate the impact of the knee morphology and regional bone quality of the proximal tibia on the PCL injury pattern. Methods: This retrospective study compared the radiological features of 76 patients with PCL injuries (PI group) and 76 matched patients with normal PCL (control group). The PI group was divided into 2 subgroups: PCL avulsion fracture (PAF subgroup; n = 43) and PCL intrasubstance tear (PIT subgroup; n = 33). Measurements included the coronal notch width index, coronal tibial slope, medial and lateral posterior tibial slopes, and medial tibial depth. Three Hounsfield unit average measurements were taken from the proximal tibia around the PCL insertion site to create a summative measure of overall bone quality. Results: The medial tibial depth and coronal notch width index were significantly lower in the PI group than those in the control group (medial tibial depth: 2.04 ± 0.77 vs. 3.02 ± 1.04, p = 0.017; coronal notch width index: 0.21 ± 0.03 vs. 0.24 ± 0.03, p = 0.041). In the subgroup analysis, medial tibial depth and Hounsfield unit were significantly lower in the PAF subgroup than in the PIT subgroup (medial tibial depth: 1.74 ± 0.66 vs. 2.43 ± 0.77, p = 0.008, Hounsfield unit: 89.48 ± 31.73 vs. 120.15 ± 29.24, p = 0.004). Binary logistic regression analysis showed that medial tibial depth (odds ratio [OR], 0.161; p < 0.001) and Hounsfield unit (OR, 0.950;p < 0.001) were independent risk factors for PCL tibial avulsion fractures. Conclusions Lower notch width index and medial tibial depth are associated with PCL injuries. Shallower medial tibial depth and lower Hounsfield unit measurements around the PCL insertion site were associated with an increased incidence of PCL avulsion fractures. These findings may assist clinicians in identifying patients at risk of distinct PCL injury patterns.

Background: The removal of a well-fixed acetabular cup is a challenging, labor-intensive, and time-consuming step during revision hip arthroplasty. Although the advent of the manual osteotome, Explant, has simplified the procedure, it is still a stressful process as it dissipates the surgeon’s strength and time and risks an iatrogenic pelvic fracture. Recently, EZX, a powered tool for extraction of well-fixed acetabular cups with semicircular blade was invented. This study aimed to compare Explant and EZX in an experimental condition for their efficacy and safety. Methods: Cementless acetabular cups were press-fitted to 20 hemipelvic polyurethane models using foam adhesives. Ten cups were removed with each tool for comparison of the elapsed time, loads on the entire hemipelvis, periacetabular strain and temperature, volume of periacetabular bone removed, and diameter of the remaining acetabular rim. Strains and loads were quantitatively assessed using strain gauges and load cells for precise and reliable measurements. Results: The mean duration required to remove a well-fixed cup with EZX was 38.5 seconds (range, 25–55), whereas that with Explant was 543.7 seconds (range, 214–1,051) (p < 0.001). The load on the entire hemipelvis with EZX (mean, 9.1 kgf; range, 6.4–11.3) was 33% lower than that with Explant (mean, 13.6 kgf; range, 9.2–17.1) (p < 0.001). The periacetabular peak strains at the 3 positions with EZX were significantly lower than those with Explant (p < 0.001). The temperature during the removal did not differ significantly between the 2 tools. Although the mean volume of bone loss with Explant was 2.4 mL more than that with EZX (p < 0.001), the mean diameters of the remaining acetabular rim were not significantly different, measuring 54.1 mm with both tools. Conclusions The present experiment revealed that a well-fixed cup could be removed using a powered tool with less strength and time and less load on the entire pelvis. Although the powered tool removed a larger volume of bone, the diameters of the remaining acetabular rims were equivalent. This tool may help surgeons remove well-fixed cups in a short time and reduce the deforming load on the bone around the cup without increasing the size of the subsequent reconstruction cup.