Hard capsules of traditional Chinese medicine(TCM) have different degrees of hygroscopicity, which affects the stability and efficacy of drugs. In this paper, 30 kinds of commercially available TCM capsules were used as the research object. The hygroscopicity curves of capsule contents, capsule shells, and capsules were tested respectively, and the first-order kinetic equation was used for fitting. The results show that during the 24 h hygroscopicity process, the capsule shell can reduce the weight gain caused by the hygroscopicity of the contents by 0.80%-53.0% and the hygroscopicity rate of the capsule contents by 1.74%-91.3%, indicating that the capsule shell has a strong delay effect on the hygroscopicity of the contents of the TCM capsules. Seven physical parameters of the contents of 30 kinds of TCM capsules were determined, and 14 prescription process-related parameters were sorted out. A partial least squares model for predicting the hygroscopicity rate of the contents of TCM capsules(with shell) for 24 h was established. It is found that the hygroscopicity rate of the capsule shell is positively correlated with the hygroscopicity of the contents of TCM capsules(with shell), suggesting that the capsule shell with a low hygroscopicity rate is helpful for moisture prevention. In addition, the pre-treatment process route of the preparation and the type of molding raw materials affect the hygroscopicity. A larger proportion of the extract in the capsule content and a smaller proportion of the fine powder of the decoction pieces indicate stronger hygroscopicity of the capsule content. The 24 h hygroscopicity rate of 15% was used as the classification node of hygroscopicity strength, and the hygroscopicity rate constant of 0.58 was used as the classification node of hygroscopicity speed. The classification system of hygroscopicity behaviors of TCM capsules was established: the varieties with strong and fast hygroscopicity accounted for about 6.67%, while those with strong and slow hygroscopicity accounted for about 33.3%; the varieties with weak and fast hygroscopicity accounted for about 26.7%, while those with weak and slow hygroscopicity accounted for about 33.3%. The classification system is helpful to quantify and compare the hygroscopicity behavior of different TCM capsules and provides a reference for the quality improvement, moisture prevention technologies, and material research of TCM capsules.
Medicine, Chinese Traditional ; Wettability ; Capsules ; Powders ; Technology ; Drugs, Chinese Herbal

Indigo Naturalis( IN) is mainly composed of 10% organic matter and 90% inorganic matter,with a poor wettability and strong hydrophobicity. Indigo,indirubin and effective ingredients are almost insoluble in water. And how it exerts its effect after oral administration still needs to be revealed. For this reason,this study put forward the hypothesis that " Indigo Naturalis forms a slightly soluble calcium carbonate carrier in a strong acid environment of gastric fluid,and organic substances are solubilized in the bile environment of intestinal fluid",and then verified the hypothesis. First,the dissolution apparatus was used to simulate the change process of IN in different digestive fluid,and the effects of low-dose and normal bile on the dissolution of inorganic substances and the release of organic substances were compared. After the surface morphology and element changes of IN in different digestive fluid were observed,it was found that bile is the key to promoting the dissolution of organic and inorganic substances in IN. Furthermore,the rat fever model induced by 2,4-dinitrophenol was used to study the antipyretic effect of IN in normal rats and bile duct ligation rats. It was found that the antipyretic effect of IN on normal rats was better than that of bile duct ligation rats. The above results indicated that after oral administration of IN,the calcium carbonate carrier was transformed into a slightly soluble state in acidic gastric fluid,and a small amount of organic matter was released. When IN entered the intestinal fluid mixed with bile,the carrier dissolved in a large amount,and indigo and indirubin were dissolved in a large amount,so as to absorb the blood and exert the effect. This study has a certain significance for guiding clinical application of IN. For patients with insufficient bile secretion( such as bile duct resection),oral administration with IN may not be effective and shall be paid attention.
Animals ; Bile ; Humans ; Hydrophobic and Hydrophilic Interactions ; Indigo Carmine ; Indigofera ; Plant Extracts ; Rats

Polyethylene glycol (PEG) surface film-forming method was used to prepare hydrophilic Indigo Naturalis decoction pieces with stable effect.The preparation process of modified Indigo Naturalis was optimized and its microscopic properties,hydrophilicity,antipyretic efficacy,and safety were systematically evaluated.With equilibrium contact angle as assessment index,the influence of modifier type,modifier dosage,dispersant dosage,and co-grinding time on water solubility of Indigo Naturalis was investigated by single factor test.The results showed that the optimal preparation process was as follows.The 6%PEG6000 is dissolved in 10%anhydrous ethanol solution by sonification and then the mixture is ground with Indigo Naturalis for 2 min.The resultant product is dried on a square tray in an oven at 60℃to remove ethanol and thereby the PEG-modified hydrophilic Indigo Naturalis decoction pieces are yielded.The morphological observation under scanning electron microscope (SEM) indicated that the modified Indigo Naturalis had smoother surface than Indigo Naturalis,and energy spectrometer measurement showed that the nitrogen (N),calcium(Ca),oxygen (O),and silicon (Si) on the surface of modified Indigo Naturalis powder were less than those of Indigo Naturalis powder.Modified Indigo Naturalis had the equilibrium contact angle 18.96°smaller,polar component 22.222 m J·m~(-2)more,and nonpolar component 7.277 m J·m~(-2)smaller than the Indigo Naturalis powder.Multiple light scattering technique was employed to evaluate the dispersion in water and the result demonstrated that the transmittance of Indigo Naturalis and modified Indigo Naturalis was about85%and 75%,respectively,suggesting the higher dispersity of modified Indigo Naturalis.The suspension rate of modified Indigo Naturalis in water was determined by reflux treatment.The result showed that 57%of Indigo Naturalis was not wetted after refluxing for1 h,while the modified Indigo Naturalis was all wetted and dispersed into water.The dissolution of indigo and indirubin of modified Indigo Naturalis increased and the process was more stable.Then,rats were randomized into the blank group,model group,acetaminophen group,Indigo Naturalis group,and hydrophilic Indigo Naturalis group.The temperature changes of rats were observed after administration and the concentration of IL-1βand TNF-αin serum and IL-1βand PGE_2in hypothalamus was measured.The results indicated that the temperature of Indigo Naturalis group and hydrophilic Indigo Naturalis group dropped and the IL-1βlevel of the hydrophilic Indigo Naturalis group decreased (P<0.05) as compared with those in the model group.Thus,both Indigo Naturalis and hydrophilic Indigo Naturalis had antipyretic effect,particularly the hydrophilic Indigo Naturalis.The acute toxicity test of hydrophilic Indigo Naturalis verified that it had no toxicity to rats.In this study,the hydrophilic Indigo Naturalis decoction pieces were prepared with the PEG surface film-forming method,and the antipyretic efficacy and safety were evaluated,which expanded the technological means of powder modification for Chinese medicine and provided a method for clinical use of Chinese medicine.
Animals ; Drugs, Chinese Herbal ; Hydrophobic and Hydrophilic Interactions ; Indigo Carmine ; Indigofera ; Polyethylene Glycols ; Rats

This study was designed to investigate the correlations of the spatial structure properties of Chinese medicinal extracts with hygroscopicity and the anti-hygroscopic techniques. With Poria extract used as the model drug, pregelatinised starch and microcrystalline cellulose at different ratios were added into Poria fluid extract for preparing powder particles with diverse spatial structures using different drying processes. Then, their hygroscopic behaviours were characterized by equilibrium hygroscopicity(F~∞) and semi-hygroscopic time(t_(1/2)). The correlations of the hygroscopicity of each powder with the spatial structure properties such as particle size(D_(90)), porosity(ε), true density(ρ_t), and surface element distribution were analyzed using partial least-squares method. The F~∞ and t_(1/2) values of Poria extract prepared by three drying methods were sorted in a descending order as follows: F~∞(spray drying>drying at ordinary pressure>drying at reduced pressure); t_(1/2)(drying at reduced pressure>drying at ordinary pressure>spray drying). The powder obtained by spray drying showed a spherical structure with the smallest particle size and intra-particle ε but relatively stronger hygroscopicity. The large-scale surface element enrichment of the powders dried by reduced pressure effectively reduced their hygroscopicity. F~∞ and t_(1/2) were negatively correlated with ε but positively with D_(90), and the interactive influence of each spatial structural properties was not significant. There existed a correlation between the spatial structure of the powder particles of Chinese medicine extracts and their hygroscopicity, and the hygroscopicity could be improved by designing the spatial structure. This study has provided some practical basis for developing the moisture-proof technology of Chinese medicinal preparations.
China ; Particle Size ; Plant Extracts ; Powders ; Technology ; Wettability

Based on the defects in powder properties of the contents of Ziyin Yiwei Capsules, this study screened out the main medicinal slice powders causing the poor powdery properties, and introduced the powder modification process to improve the powdery properties of these slice powders, the pharmaceutical properties of the capsule contents, and the content uniformity of Ziyin Yiwei Capsules, so as to provide a demonstration for the application of powder modification technology to the preparation of Chinese medicinal solid preparations. Through the investigation on the powder properties of the contents of Ziyin Yiwei Capsules, it was clarified that the pulverized particle size of the capsule contents had a good correlation with the pulverization time. According to the measurement results of the powder fluidity and wettability, the quality defects of the capsule contents were caused by the fine powders of Taraxaci Herba and Lungwortlike Herba. "Core-shell" composite particles were prepared from medicinal excipients magnesium stearate and fine powders of Taraxaci Herba and Lungwortlike Herba slices after ultra-fine pulverization to improve the powder properties of the problematic fine powders. Powder characterization data including fluidity and wettability were measured, followed by scanning electron microscopy(SEM) and infrared ray(IR) detection. It was determined that the optimal dosage of magnesium stearate was 2%, and the compositing time was 3 min. The composite particles were then used as content components of the Ziyin Yiwei Capsules. The powder characteristics between the original capsule and the modified composite capsule including the particle size, fluidity, wettability, uniformity of bulk density, and uniformity of chromatism as well as the content uniformity and in vitro dissolution were compared. The results showed that the powder characteristics and content uniformity of the prepared composite capsule were significantly improved, while the material basis of the preparation was not changed before and after modification. The preparation process was proved to be stable and feasible. The powder modification technology solved the pharmaceutical defects that were easy to appear in the preparation of traditional capsules, which has provided experimental evidence for the use of powder modification technology for improving the quality of Chinese medicinal solid preparations and promoting the secondary development and upgrading of traditional Chinese medicinal dosage forms such as capsules.
Capsules ; Excipients ; Particle Size ; Powders ; Wettability

According to human carboxylesterase 2(hCE2) inhibitors reported in the literature, the pharmacophore model of hCE2 inhibitors was developed using HipHop module in Discovery Studio 2016. The optimized pharmacophore model, which was validated by test set, contained two hydrophobic, one hydrogen bond acceptor, and one aromatic ring features. Using the pharmacophore model established, 5 potential hCE2 inhibitors(CS-1,CS-2,CS-3,CS-6 and CS-8) were screened from 20 compounds isolated from the roots of Paeonia lactiflora, which were further confirmed in vitro, with the IC_(50) values of 5.04, 5.21, 5.95, 6.64 and 7.94 μmol·L~(-1), respectively. The results demonstrated that the pharmacophore model exerted excellent forecasting ability with high precision, which could be applied to screen novel hCE2 inhibitors from Chinese medicinal materials.
Carboxylesterase/metabolism* ; Humans ; Hydrogen Bonding ; Hydrophobic and Hydrophilic Interactions

Polymer hydrophilic lubricating coatings for medical catheters refer to highly hydrophilic coating films fixed on the surface of catheters with binding force, which can reduce the surface friction with human tissues during the use of interventional catheters, improve the patient comfort of and effectively reduce the incidence of infection. Based on the development process of medical catheter coating, this review summarizes recent advances in the field of polymer hydrophilic lubricating coatings for medical catheters from types of hydrophilic coating polymer, development of coating technology and establishment of coating performance evaluation method. Main problems in this field are analyzed and development trends in the future are prospected.
Catheters ; Humans ; Hydrophobic and Hydrophilic Interactions ; Polymers

To control the risks of powder caking and capsule shell embrittlement of Guizhi Fuling Capsules, a predictive model for hygroscopicity of contents in Guizhi Fuling Capsules was built. A total of 90 batches of samples, including raw materials, intermediate powders and capsules, were collected during the manufacturing of Guizhi Fuling Capsules. According to the production sequence, 47 batches were used as the calibration set, and the properties of raw materials and the four intermediate powders were comprehensively characterized by the physical fingerprint. Then, the partial least squares(PLS) model was developed with the content hygroscopicity as the response variable. The variable importance in projection(VIP), variance inflation factor(VIF) and regression coefficients were used to screen out potential critical material attributes(pCMAs). As a result, five pCMAs from 54 physical parameters were screened out. Furthermore, different models were built by different combinations of pCMAs, and their predictive robustness of 43 batches was evaluated on the basis of the validation set. Finally, the tap density(D_c) of wet granules obtained from wet granulation and the angle of repose(α) of raw materials were identified as the critical material attributes(CMAs) affecting the hygroscopicity of the contents of Guizhi Fuling Capsules. The prediction model established with the two CMAs as independent variables had an average relative prediction error of 2.68% for samples in the validation set, indicating a good accuracy of prediction. This paper proved the feasibility of predictive modeling toward the control of critical quality attributes of Chinese medicine oral solid dosage(OSD). The combination of the continuous quality improvement, the industrial big data and the process modeling technique paved the way for the intelligent manufacturing of Chinese medicine oral solid preparations.
Capsules ; Drug Compounding ; Drugs, Chinese Herbal/chemistry* ; Powders ; Wettability

PURPOSE: The aim of this study was to confirm if Laser-treated implants were soaked in 0.9% NaCl solution for 2 weeks could increase the surface hydrophilicity, and the Remoal Torque of each implant that inserted in rabbit tibia for initial healing period of 10 days. MATERIALS AND METHODS: Twenty machined titanium surface screws were produced with a diameter 3 mm, length 8 mm. Ten screws had their surface treated with a laser only (laser treated group), and the other 10 were soaked in saline for 2 weeks after surface treatment with a laser (laser treated + saline soaked group). Implants were inserted in rabbit tibia (ten adult New Zealand white rabbits), and the RTQ of each implant was measured after 10 days. The wettability among implants was compared by measuring the contact angle. Surface composition and surface topography were analyzed. RESULTS: After 10 days, the laser treat + soaking group implants had a significantly higher mean RTQ than the laser treated implants (P = .002, < .05). There were no significant morphological differences between groups, and no remarkable differences were found between the two groups in the SEM analysis. CONCLUSION: Saline soaking implants is expected to produce excellent RTQ and surface analysis results.
Adult ; Humans ; Hydrophobic and Hydrophilic Interactions ; New Zealand ; Tibia ; Titanium ; Torque ; Wettability

PURPOSE: This study evaluated differences in bone healing and remodeling among 3 implants with different surfaces: sandblasting and large-grit acid etching (SLA; IS-III Active®), SLA with hydroxyapatite nanocoating (IS-III Bioactive®), and SLA stored in sodium chloride solution (SLActive®). METHODS: The mandibular second, third, and fourth premolars of 9 dogs were extracted. After 4 weeks, 9 dogs with edentulous alveolar ridges underwent surgical placement of 3 implants bilaterally and were allowed to heal for 2, 4, or 12 weeks. Histologic and histomorphometric analyses were performed on 54 stained slides based on the following parameters: vertical marginal bone loss at the buccal and lingual aspects of the implant (b-MBL and l-MBL, respectively), mineralized bone-to-implant contact (mBIC), osteoid-to-implant contact (OIC), total bone-to-implant contact (tBIC), mineralized bone area fraction occupied (mBAFO), osteoid area fraction occupied (OAFO), and total bone area fraction occupied (tBAFO) in the threads of the region of interest. Two-way analysis of variance (3 types of implant surface×3 healing time periods) and additional analyses for simple effects were performed. RESULTS: Statistically significant differences were observed across the implant surfaces for OIC, mBIC, tBIC, OAFO, and tBAFO. Statistically significant differences were observed over time for l-MBL, mBIC, tBIC, mBAFO, and tBAFO. In addition, an interaction effect between the implant surface and the healing time period was observed for mBIC, tBIC, and mBAFO. CONCLUSIONS: Our results suggest that implant surface wettability facilitates bone healing dynamics, which could be attributed to the improvement of early osseointegration. In addition, osteoblasts might become more activated with the use of HA-coated surface implants than with hydrophobic surface implants in the remodeling phase.
Animals ; Bicuspid ; Bone Remodeling ; Bone-Implant Interface ; Dogs ; Durapatite ; Miners ; Osseointegration ; Osteoblasts ; Sodium Chloride ; Wettability