Purpose: This study aimed to validate pivotal pre-test probability (PTP)-coronary artery disease (CAD) models (CAD consortium model and IJC-CAD model). Materials and Methods: Traditional PTP models-CAD consortium models: two traditional PTP models were used under the CAD consortium framework, namely CAD1 and CAD2. Machine learning (ML)-based PTP models: two ML-based PTP models were derived from CAD1 and CAD2, and used to enhance predictive capabilities [ML-CAD2 and ML-IJC (IJC-CAD)]. The primary endpoint was obstructive CAD. The performance evaluation of these PTP models was conducted using receiver-operating characteristic analysis. Results: The study included 238 participants, among whom 157 individuals (65.9% of the total sample) had CAD. The IJC-CAD model demonstrated the highest performance with an area under the curve (AUC) of 0.860 [95% confidence interval (CI): 0.812– 0.909]. Following this, the ML-CAD2 model exhibited an AUC of 0.814 (95% CI: 0.758–0.870), CAD1 showed an AUC of 0.767 (95% CI: 0.705–0.830), and CAD2 had an AUC of 0.785 (95% CI: 0.726–0.845). Each of the PTP models was adjusted to have a CAD score cutoff that classified cases with a sensitivity of over 95%. The respective cutoff values were as follows: CAD1 and CAD2 >12, MLCAD2 >0.380, and IJC-CAD >0.367. All PTP models achieved a CAD sensitivity of over 95%. Similar to the AUC performance, the accuracy of the PTP models was highest for IJC-CAD, reaching 80.3%. The accuracy of ML-CAD2 was 77.7%, while that for CAD1 and CAD2 was 74.8% and 75.2%, respectively. Conclusion ML-CAD2 and IJC-CAD showed superior performance compared to traditional existing models (CAD1 and CAD2)

Purpose: To investigate whether using a continuous glucose monitoring (CGM) for the second time (2nd_CGM) would be effective after using it for the first time (1st_CGM), depending on age. Materials and Methods: This study included patients aged ≥40 years who were diagnosed with type 2 diabetes and had used a CGM at least twice between 2017 and 2021. Participants were divided into two groups based on their age: those aged <60 years and those aged ≥60 years. We assessed the glycemic control status of the 1st_CGM and 2nd_CGM, along with the glycemic variability. Results: Overall, 15 patients were included in the study. The mean glucose level in users aged <60 years significantly decreased (p<0.001) owing to the CGM use, while it did not increase in those aged ≥60 years. In users aged ≥60 years, the 1st_CGM group showed a significant decrease in blood glucose levels over time (p<0.05), whereas the 2nd_CGM group only showed a non-significant decreasing trend. The time in range tended to increase in those aged <60 years but decreased in those aged ≥60 years. In those aged <60 years, the mean amplitude of glycemic excursions (p<0.001), standard deviation (p<0.05), and coefficient of variation (p<0.001) significantly decreased. In those aged ≥60 years, these parameters exhibited a non-significant decreasing trend. Conclusion Glycemic effect and variability improved as expected with 1st_CGM use. However, 2nd_CGM did not significantly improve glycemic effect or variability in users aged ≥60 years, contrary to expectations. To address this issue, further investigation is needed to understand why, compared to 1st_CGM, 2nd_CGM fails to achieve better glycemic control in individuals aged ≥60 years.

Purpose: The impact of vitamin D deficiency on nonalcoholic fatty liver disease (NAFLD) risk in individuals without obesity or insulin resistance has not been thoroughly evaluated. We aimed to identify whether low serum levels of 25(OH)D independently contribute to NAFLD risk in nonobese or lean individuals. Materials and Methods: This study analyzed 241208 asymptomatic health check-up examinees who had abdominal ultrasonography. NAFLD risk was evaluated based on obesity status and serum 25(OH)D levels. Results: The overall NAFLD prevalence was 25.5%. Among the 178630 nonobese and 126909 lean participants, the prevalence rates were 13.4% and 6.7%, respectively. The multivariable adjusted odds ratios (ORs) [95% confidence intervals (CI)] for the prevalence of NAFLD, comparing serum 25(OH)D levels of 10–19 and ≥20 ng/mL with <10 ng/mL, were 0.96 (0.93–0.99) and 0.80 (0.77–0.83), respectively. Among nonobese participants, the corresponding adjusted ORs (95% CI) were 0.94 (0.90–0.99) and 0.77 (0.73–0.81), respectively. Similar results were observed among lean participants, with those having a 25(OH)D level of ≥20 ng/mL demonstrating a significantly lower odds of NAFLD (adjusted OR, 0.76; 95% CI, 0.70–0.83). Moreover, these results were consistent even among nonobese and lean individuals who showed no signs of insulin resistance. Conclusion Insufficient 25(OH)D levels independently increased the risk of NAFLD, suggesting its role in the NAFLD pathogenesis, regardless of obesity or insulin resistance status. Considering the established relationship between vitamin D deficiency and nonobese/lean NAFLD, maintaining adequate 25(OH)D levels may aid in preventing the development of NAFLD, even among nonobese or lean individuals.

Objective: Using finite element method (FEM) analysis of a clear aligner (CA), this study aimed to investigate the effects of varying the edentulous space on canine distal bodily movement during space closure following maxillary first premolar extraction. Methods: FEM analysis was used to simulate distal canine bodily movement following maxillary first premolar extraction using CAs. Four CA designs for edentulous spaces were compared: no-pontic, full-pontic, halfpontic, and beam. Three-dimensional models of the tooth components and CA were created. The target was set at a 0.25-mm distal canine movement. Long-term tooth movement was simulated using an iterative calculation method. Results: All the groups initially showed crown displacement, distal tipping, and distal rotation.Over time, the movement patterns differed in relation to the design. The no-pontic design exhibited the greatest displacement and tipping. The beam design exhibited the largest initial displacement but showed the lowest displacement and tipping thereafter. Full- and half-pontic designs yielded intermediate results. Significant force reduction was observed immediately after CA application, and was followed by a gradual decrease. The mean tooth-movement achievement rate was approximately 76.7%. Conclusions The edentulous space design of the CA substantially affected tooth-movement behavior. An iterative simulation is necessary to evaluate longterm tooth-movement patterns. The beam design demonstrated optimal suitability for bodily movement with minimal tipping. For optimal results, additional setup or overcorrection may be necessary.

Objective: To quantitatively analyze and compare the forces and moments generated by thermoformed polyethylene terephthalate glycol (PETG) and direct-printed TC-85 clear aligners (CAs), with various margin designs, during premolar rotation. Methods: In total, 132 CAs were fabricated and divided into four groups (n = 33 per group). Group C consisted of thermoformed PETG aligners with a 2 mm gingival margin. Group E comprised direct-printed TC-85 aligners with equi-gingival margin, whereas Group G utilized direct-printed TC-85 aligners with 2 mm gingival margins.Finally, Group T featured direct-printed TC-85 aligners with an additional 1 mm thickness at the mesial embrasure. The forces and moments were measured using a 6-axis force/moment transducer at 2°, 3°, and 4° of rotation. All measurements were conducted at 37°C to simulate intraoral conditions. Forces were measured in the buccolingual, anteroposterior, and vertical directions, while moments were measured in the mesiodistal, buccolingual, and rotational planes. Results: The PETG aligners (Group C) showed significantly increased buccal and posterior force across the rotation angles (P < 0.05), whereas the intrusive force remained consistent. In contrast, the TC-85 aligners maintained consistent forces across all rotation angles.Direct-printed aligners demonstrated significantly lower intrusive forces than PETG aligners (P < 0.001). Group T exhibited reduced unwanted forces while maintaining effective rotational moments. Furthermore, all direct-printed aligners showed more predictable force delivery patterns than thermoformed aligners. Conclusions Direct-printed TC-85 aligners demonstrated superior force consistency and reduced unwanted side effects compared with traditional PETG aligners. Although marginal design modifications did not significantly improve rotational efficiency, they effectively reduced unwanted intrusive forces.

Background: Chronic pain significantly affects daily activities, mental health, and the interpersonal relationships of patients. Consequently, physicians use various treatments to manage pain. This study investigated the perceptions of treatment, accompanying symptoms, and other problems in patients with chronic pain. Methods: The authors enrolled patients with chronic pain from 19 university hospitals in South Korea. Data was collected on age, gender, diagnosis, disease duration, severity of pain, perception of pain treatment, and accompanying symptoms or problems using an anonymous survey comprising 19 questions. Results: In total, 833 patients with chronic pain completed the survey, and 257 (31.0%) and 537 (64.5%) patientsexpressed concerns about the potential adverse effects of medication and opioid addiction, respectively. Personalitychanges such as irritability or anger were the most frequent accompanying symptoms in 507 (63.8%) patients, followed by depression and sleep disturbance in 462 (58.1%) and 450 (54.5%) patients, respectively. Depression (P = 0.001) and anxiety (P = 0.029) were more common among women, whereas divorce (P = 0.016), family conflict (P < 0.001), unemployment (P < 0.001), suicide attempts (P < 0.001), and restrictions on economic activity (P < 0.001) were more common among men. The frequency of accompanying symptoms, except for suicidal ideation,was higher in the younger patients aged ≤ 40 years than in the older patients aged > 40 years. Conclusions Many patients with chronic pain had concerns about adverse effects or medication tolerance and experienced anxiety, depression, or sleep disturbances. The prevalence of accompanying problems varies according to age and gender.

Peyronie’s disease is an acquired condition characterized by penile deformities caused by fibrosis of the penile tunica albuginea, leading to symptoms such as penile pain, erectile dysfunction, and other associated issues. Despite extensive research, the pathophysiology of this condition remains poorly understood, and standardized diagnostic and treatment protocols are lacking. While clinical guidelines from several professional societies exist, they do not consistently account for factors such as patient ethnicity, geography, and socioeconomic status. Thus, the Korean Society for Sexual Medicine and Andrology (KSSMA) aimed to develop recommendations tailored to clinical practice in Korea. These recommendations summarize the latest evidence, including clinical practice guidelines from various international professional societies, and represent the consensus opinion of an expert group within the KSSMA. They encompass all aspects of Peyronie’s disease, including the definition, diagnosis, non-surgical interventions, and surgical treatment options.

Connective tissue disease (CTD), comprising a range of autoimmune disorders, is often accompanied by lung involvement, which can lead to life-threatening complications. The primary types of CTDs that manifest as interstitial lung disease (ILD) include rheumatoid arthritis, systemic sclerosis, Sjögren’s syndrome, mixed CTD, idiopathic inflammatory myopathies, and systemic lupus erythematosus. CTD-ILD presents a significant challenge in clinical diagnosis and management due to its heterogeneous nature and variable prognosis. Early diagnosis through clinical, serological, and radiographic assessments is crucial for distinguishing CTD-ILD from idiopathic forms and for implementing appropriate therapeutic strategies. Hence, we have reviewed the multiple clinical manifestations and diagnostic approaches for each type of CTD-ILD, acknowledging the diversity and complexity of the disease. The importance of a multidisciplinary approach in optimizing the management of CTD-ILD is emphasized by recent therapeutic advancements, which include immunosuppressive agents, antifibrotic therapies, and newer biological agents targeting specific pathways involved in the pathogenesis. Therapeutic strategies should be customized according to the type of CTD, the extent of lung involvement, and the presence of extrapulmonary manifestations. Additionally, we aimed to provide clinical guidance, including therapeutic recommendations, for the effective management of CTD-ILD, based on patient, intervention, comparison, outcome (PICO) analysis.

Purpose: This study aimed to validate pivotal pre-test probability (PTP)-coronary artery disease (CAD) models (CAD consortium model and IJC-CAD model). Materials and Methods: Traditional PTP models-CAD consortium models: two traditional PTP models were used under the CAD consortium framework, namely CAD1 and CAD2. Machine learning (ML)-based PTP models: two ML-based PTP models were derived from CAD1 and CAD2, and used to enhance predictive capabilities [ML-CAD2 and ML-IJC (IJC-CAD)]. The primary endpoint was obstructive CAD. The performance evaluation of these PTP models was conducted using receiver-operating characteristic analysis. Results: The study included 238 participants, among whom 157 individuals (65.9% of the total sample) had CAD. The IJC-CAD model demonstrated the highest performance with an area under the curve (AUC) of 0.860 [95% confidence interval (CI): 0.812– 0.909]. Following this, the ML-CAD2 model exhibited an AUC of 0.814 (95% CI: 0.758–0.870), CAD1 showed an AUC of 0.767 (95% CI: 0.705–0.830), and CAD2 had an AUC of 0.785 (95% CI: 0.726–0.845). Each of the PTP models was adjusted to have a CAD score cutoff that classified cases with a sensitivity of over 95%. The respective cutoff values were as follows: CAD1 and CAD2 >12, MLCAD2 >0.380, and IJC-CAD >0.367. All PTP models achieved a CAD sensitivity of over 95%. Similar to the AUC performance, the accuracy of the PTP models was highest for IJC-CAD, reaching 80.3%. The accuracy of ML-CAD2 was 77.7%, while that for CAD1 and CAD2 was 74.8% and 75.2%, respectively. Conclusion ML-CAD2 and IJC-CAD showed superior performance compared to traditional existing models (CAD1 and CAD2)