OBJECTIVE: To compare the biomechanical properties of four internal fixation methods in a lower cervical spine injury model using the finite element method. METHODS: Cervical CT data of a 28-year-old healthy adult male were utilized to establish a finite element model of the normal cervical spine and a lower cervical spine three-column injury model. Four internal fixation methods were then applied to the three-column injury model, resulting in four groups:Group A, anterior cervical locked-plate(ACLP) fixation system model(anterior approach);Group B, posterior cervical pedicle screw fixation model (posterior approach);Group C, combined anterior and posterior cervical pedicle screw fixation model; Group D, Novel composite anterior cervical internal fixation model. A 75 N axial compressive load and a 1.0 N·m pure moment were applied to the upper surface of the cervical spine model to simulate flexion, extension, rotation, and lateral bending movements. The intervertebral range of motion(ROM) and stress distribution of the internal fixators under different motion conditions were compared across all models. RESULTS: Compared with the normal model, the reductions in overall intervertebral ROM for each group under flexion, extension, rotation, and lateral bending were as follows:Group A, 24.04°, 23.12°, 6.24°, and 9.06°;Group B, 24.42°, 24.34°, 6.48°, and 9.20°;Group C, 25.43°, 25.29°, 7.17°, and 9.57°;Group D, 24.75°, 25.5°, 6.71°, and 9.12°. The peak stress values of the internal fixators in each group were:Group A, 53.9 MPa, 79.9 MPa, 61.4 MPa, and 80.3 MPa;Group B, 218.3 MPa, 105.4 MPa, 206.6 MPa, and 186.8 MPa;Group C, 40.8 MPa, 97.2 MPa, 47.1 MPa, and 39.4 MPa;Group D, 93.0 MPa, 144.0 MPa, 64.8 MPa, and 106.3 MPa. CONCLUSION The biomechanical properties of the novel composite anterior cervical internal fixation method are similar to those of the combined anterior-posterior fixation method, and superior to both the anterior cervical ACLP plate-screw fixation and posterior cervical pedicle screw fixation methods.
Humans ; Finite Element Analysis ; Cervical Vertebrae/physiopathology* ; Male ; Biomechanical Phenomena ; Adult ; Fracture Fixation, Internal/methods* ; Range of Motion, Articular

OBJECTIVE: To explore the construction method of a resistant multiple myeloma (MM) patient-derived xenotransplantation (PDX) model. METHODS: 1.0×10⁷ MM patient-derived mononuclear cells (MNCs), 2.0×10⁶ MM.1S cells and 2.0×10⁶ NCI-H929 cells were respectively subcutaneously inoculated into NOD.CB17-Prkdc^scid Il2rg^tm1/Bcgen (B-NDG) mice with a volume of 100 μl per mouse to establish mouse model. The morphologic, phenotypic, proliferative and genetic characteristics of PDX tumor were studied by hematoxylin-eosin staining, immunohistochemical staining (IHC), cell cycle analysis, flow cytometry and fluorescence in situ hybridization (FISH). The sensitivity of PDX tumor to bortezomib and anlotinib monotherapy or in combination was investigated through cell proliferation, apoptosis and in vitro and in vivo experiments. The effects of anlotinib therapy on tumor blood vessel and cell apoptosis were analyzed by IHC, TUNEL staining and confocal fluorescence microscope. RESULTS: MM PDX model was successfully established by subcutaneously inoculating primary MNCs. The morphologic features of tumor cells from MM PDX model were similar to those of mature plasma cells. MM PDX tumor cells positively expressed CD138 and CD38, which presented 1q21 amplification, deletion of Rb1 and IgH rearrangement, and had a lower proliferative activity than MM cell lines. in vitro, PDX, MM.1S and NCI-H929 cells were treated by bortezomib and anlotinib for 24 hours, respectively. Cell viability assay showed that the IC₅₀ value of bortezomib were 5 716.486, 1.025 and 2.775 nmol/L, and IC₅₀ value of anlotinib were 5 5107.337, 0.706 and 5.13 μmol/L, respectively. Anlotinib treatment increased the apoptosis of MM.1S cells (P < 0.01), but did not affect PDX tumor cells (P >0.05). in vivo, there was no significant difference in PDX tumor growth between bortezomib monotherapy group and control group (P >0.05), while both anlotinib monotherapy and anlotinib combined with bortezomib effectively inhibited PDX tumor growth (both P < 0.05). The vascular perfusion and vascular density of PDX tumor were decreased in anlotinib treatment group (both P < 0.01). The apoptotic cells in anlotinib treatment group were increased compared with those in control group (P < 0.05). CONCLUSION Bortezomib-resistant MM PDX model can be successfully established by subcutaneous inoculation of MNCs from MM patients in B-NDG mice. This PDX model, which retains the basic biological characteristics of MM cells, can be used to study the novel therapies.
Animals ; Bortezomib ; Humans ; Multiple Myeloma/pathology* ; Mice ; Apoptosis ; Drug Resistance, Neoplasm ; Cell Line, Tumor ; Xenograft Model Antitumor Assays ; Mice, Inbred NOD ; Disease Models, Animal ; Cell Proliferation ; Transplantation, Heterologous

OBJECTIVE: This study aimed to determine the expression levels and prognostic significance of MYCN in bone marrow of adult patients with newly diagnosed acute myeloid leukemia (AML). METHODS: A total of 62 newly diagnosed patients with non-M3 AML were enrolled as the study group, and 20 healthy donors as the control group. Real-time quantitative reverse transcription-polymerase chain reaction (PCR) was performed to detect the expression level of MYCN, and the relationship between MYCN expression and prognosis of AML patients was analyzed. RESULTS: MYCN was up-regulated in newly diagnosed AML patients compared with normal controls (P < 0.001). Receiver operating characteristic (ROC) curve analysis revealed that MYCN could serve as a diagnostic biomarker for AML. Kaplan-Meier survival analysis showed that the patients with high MYCN expression had a shorter overall survival (OS) time than the patients with low MYCN expression (P =0.016). The expression level of MYCN was lower during the complete ressimion (CR) phase of AML compared to the initial diagnosis, but it returned to the initial diagnostic level or even higher during relapse phase. Multivariate Cox regression analysis showed that high expression of MYCN was an independent risk factor for OS of AML patients (P =0.021). CONCLUSION MYCN is highly expressed and associated with poor prognosis in de novo AML, which might be serve as a novel diagnostic and prognostic biomarker for adult AML.
Humans ; Leukemia, Myeloid, Acute/metabolism* ; Prognosis ; N-Myc Proto-Oncogene Protein ; Adult ; Female ; Male ; Middle Aged

OBJECTIVE: To investigate the predictive value of morphology, immunology, and cytogenetics for isocitrate dehydrogenase 1 and 2 (IDH1/2) gene mutation in newly diagnosed acute myeloid leukemia (AML) patients. METHODS: The clinical data of 186 newly diagnosed AML patients (except M3 subtype) in the First People's Hospital of Changzhou were retrospectively analyzed, and the variables associated with IDH1/2 mutation in patients were screened using LASSO regression to construct a multivariate logistic regression analysis model. The Bootstrap method was used for internal validation of the model and nomograms were used to visualize the model, and receiver operating characteristic (ROC) curve was used to evaluate the predictive performance of the model. RESULTS: A total of 60 AML patients had IDH1/2 mutation at initial diagnosis. LASSO regression screened 9 predictive variables associated with IDH1/2 mutation, including CD7, CD56, CD11b, CD15, CD64, HLA-DR, platelet count≥50×10⁹/L, isolated +8 and normal karyotype. The nomogram and ROC curve were plotted based on the above 9 variables. The area under the ROC curve (AUC) of the training set and the validation set were 0.871 and 0.806, respectively. Internal validation showed that the nomogram had good predictive ability. CONCLUSION The prediction model based on MIC typing constructed in this study has a good predictive ability for the presence of IDH1/2 mutations in newly diagnosed AML patients and has important clinical application value when the gene mutation detection results are unavailable.
Humans ; Isocitrate Dehydrogenase/genetics* ; Leukemia, Myeloid, Acute/genetics* ; Mutation ; Retrospective Studies ; Nomograms ; Female ; Male ; ROC Curve ; Middle Aged

OBJECTIVE: By analyzing the hormone secretion of the adenohypophysis, thyroid glands, gonads, and adrenal cortex in patients with hematological diseases before and after hematopoietic stem cell transplantation (HSCT), this study aims to preliminarily explore the effect of HSCT on patients' hormone secretion and glandular damage. METHODS: The baseline data of 209 hematological disease patients who underwent HSCT in our hospital from January 2019 to December 2023, as well as the data on the levels of hormones secreted by the adenohypophysis, thyroid glands, gonads and adrenal cortex before and after HSCT were collected, and the changes in hormone levels before and after transplantation were analyzed. RESULTS: After allogeneic HSCT, the levels of thyroid-stimulating hormone (TSH), triiodothyronine (T3), free triiodothyronine (FT3) and estradiol (E2) decreased, while the levels of luteinizing hormone (LH) and follicle- stimulating hormone (FSH) increased. The T3 level of patients with decreased TSH after transplantation was lower than that of those with increased TSH after transplantation. In female patients, the levels of prolactin (PRL), progesterone (Prog), and testosterone (Testo) decreased after HSCT. Testo and PRL decreased when there was a donor-recipient sex mismatch, and the levels of adrenocorticotropic hormone (ACTH) and cortisol (COR) decreased when the HLA matching was haploidentical. The levels of T3, FT3, and PRL decreased after autologous HSCT. In allogeneic HSCT patients, the levels of TSH, T4, T3, FT3, and ACTH in the group with graft-versus-host disease (GVHD) were significantly lower than those in the group without GVHD. Logistic regression analysis showed the changes in hormone levels after transplantation were not correlated with factors such as the patient's sex, age, or whether the blood types of the donor and the recipient are the same. CONCLUSION HSCT can affect the endocrine function of patients with hematological diseases, mainly affecting target glandular organs such as the thyroid, gonads, and adrenal glands, while the secretory function of the adenohypophysis is less affected.
Humans ; Hematopoietic Stem Cell Transplantation ; Female ; Male ; Hematologic Diseases/blood* ; Follicle Stimulating Hormone/blood* ; Triiodothyronine/blood* ; Luteinizing Hormone/blood* ; Thyroid Gland/metabolism* ; Estradiol/blood* ; Thyrotropin/blood* ; Gonads/metabolism* ; Adult ; Middle Aged ; Adrenocorticotropic Hormone/blood* ; Hormones/metabolism* ; Adrenal Cortex/metabolism* ; Prolactin

OBJECTIVES: To determine the pharmacological impact of hesperidin, the main component of Citri Reticulatae Pericarpium, on depressive behavior and elucidate the mechanism by which hesperidin treats depression, focusing on the gut-brain axis. METHODS: Fifty-four Sprague Dawley male rats were randomly allocated to 6 groups using a random number table, including control, model, hesperidin, probiotics, fluoxetine, and Citri Reticulatae Pericarpium groups. Except for the control group, rats in the remaining 5 groups were challenged with chronic unpredictable mild stress (CUMS) for 21 days and housed in single cages. The sucrose preference test (SPT), immobility time in the forced swim test (FST), and number in the open field test (OFT) were performed to measure the behavioral changes in the rats. Enzyme-linked immunosorbent assay was used to determine the levels of 5-hydroxytryptamine (5-HT) and brain-derived neurotrophic factor (BDNF) in brain tissue, and the histopathology was performed to evaluate the changes of colon tissue, together with sequencing of the V3-V4 regions of 16S rRNA gene on feces to explore the changes of intestinal flora in the rats. RESULTS: Compared to the control group, the rats in the model group showed notable reductions in body weight, SPF, and number in OFT (P<0.01). Hesperidin was found to ameliorate depression induced by CUMS, as seen by improvements in body weight, SPT, immobility time in FST, and number in OFT (P<0.05 or P<0.01). Regarding neurotransmitters, it was found that at a dose of 50 mg/kg hesperidin treatment upregulated the levels of 5-HT and BDNF in depressed rats (P<0.05). Compared to the control group, the colon tissue of the model group exhibited greater inflammatory cell infiltration, with markedly reduced numbers of goblet cells and crypts and were significantly improved following treatment with hesperidin. Simultaneously, the administration of hesperidin demonstrated a positive impact on the gut microbiome of rats treated with CUMS, such as Shannon index increased and Simpson index decreased (P<0.01), while the abundance of Pseudomonadota and Bacteroidota increased in the hesperidin-treated group (P<0.05). CONCLUSION The mechanism responsible for the beneficial effects of hesperidin on depressive behavior in rats may be related to inhibition of the expressions of BDNF and 5-HT and preservation of the gut microbiota.
Animals ; Hesperidin/therapeutic use* ; Rats, Sprague-Dawley ; Depression/drug therapy* ; Male ; Stress, Psychological/drug therapy* ; Brain/metabolism* ; Brain-Derived Neurotrophic Factor/metabolism* ; Serotonin/metabolism* ; Gastrointestinal Microbiome/drug effects* ; Behavior, Animal/drug effects* ; Rats ; Brain-Gut Axis/drug effects* ; Chronic Disease ; Colon/drug effects*

Radiation mainly comes from medical radiation,industrial radiation,nuclear waste and atmospheric ultraviolet radiation,etc.,radiation is divided into ionizing radiation and non-ionizing radiation.Studying the effects of ionizing and non-ionizing radiation on drug metabolism,understanding the absorption and distribution of drugs in the body after radiation and the speed of elimination under radiation conditions can provide reasonable guidance for clinical medication.This article reviews the effects of radiation on the pharmacokinetics of different drugs,elaborates the changes of different pharmacokinetics under radiation state,and discusses the reasons for the changes.

Digital intraoral scanning is a hot topic in the field of oral digital technology.In recent years,digital intra-oral scanning has gradually become the mainstream technology in orthodontics,prosthodontics,and implant dentistry.The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression.However,the operators are less familiar with the intraoral scanning characteristics,imaging process-ing,operator scanning method,oral tissue specificity of the scanned object,and restoration design.Thus far,no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad.To deal with the problems encountered in oral scanning and improve the quality of digital scanning,we collected common expert opin-ions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence.We also describe the scanning strategies under different oral impression requirements.The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images,adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy.The scanning trajec-tories mainly include the E-shaped,segmented,and S-shaped methods.When performing fixed denture restoration,it is recommended to first scan the abutment and adjacent teeth.When performing fixed denture restoration,it is recommend-ed to scan the abutment and adjacent teeth first.Then the cavity in the abutment area is excavated.Lastly,the cavity gap was scanned after completing the abutment preparation.This method not only meets clinical needs but also achieves the most reliable accuracy.When performing full denture restoration in edentulous jaws,setting markers on the mucosal tissue at the bottom of the alveolar ridge,simultaneously capturing images of the vestibular area,using different types of scanning paths such as Z-shaped,S-shaped,buccal-palatal and palatal-buccal pathways,segmented scanning of dental arches,and other strategies can reduce scanning errors and improve image stitching and overlap.For implant restora-tion,when a single crown restoration is supported by implants and a small span upper structure restoration,it is recom-mended to first pre-scan the required dental arch.Then the cavity in the abutment area is excavated.Lastly,scanning the cavity gap after installing the implant scanning rod.When repairing a bone level implant crown,an improved indi-rect scanning method can be used.The scanning process includes three steps:First,the temporary restoration,adjacent teeth,and gingival tissue in the mouth are scanned;second,the entire dental arch is scanned after installing a standard scanning rod on the implant;and third,the temporary restoration outside the mouth is scanned to obtain the three-di-mensional shape of the gingival contour of the implant neck,thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration.For dental implant fixed bridge repair with missing teeth,the mobility of the mucosa increases the difficulty of scanning,making it difficult for scanners to distinguish scanning rods of the same shape and size,which can easily cause image stacking errors.Higher accuracy of digital implant impres-sions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius.The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases,the scanning accuracy decreases accordingly,especially when performing full mouth implant restoration impressions.The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal mor-phology inside the mouth and the lack of relatively obvious and fixed reference objects,which results in insufficient ac-curacy.When designing restorations of this type,it is advisable to carefully choose digital intraoral scanning methods to obtain model data.It is not recommended to use digital impressions when there are more than five missing teeth.

Objective To investigate the feasibility of mimics software in analyzing a new type of complex anterior cervical fixation—anterior transpedicular screw fixation+zero notch internal fixation.Methods From January 2021 to September 2022,50 normal pedestrians who underwent cervical spine CT scanning were selected for C1-C7 segment scanning,including 27 males and 23 females,aged from 25 to 65 years old with an average of(46.0±9.0)years old.The dicom format is exported and engraved into the CD,and use the mimics software to perform 3D reconstruction of each segment.A simulated screw is placed on the image according to the critical value of zero notch screw(head and tail angle 44°,internal angle 29°).The posi-tion of zero notch screw in each segment is observed to determine the feasibility of anterior transpedicular screw fixation plus zero notch internal fixation.Results For the upper zero notch screws the three-dimensional images of the cervical spine across all 50 subjects within the C3-C7 segments demonstrated safe position,wwith no instances of intersection with ATPS.For the lower zero notch screw,in C3-C4 and C4-C5,4 out of 50 subjects are in the safe position in the three-dimensional images of cervical ver-tebrae,and 46 cases could achieve secure screw placement when the maximum caudal angle is(32.3±1.9)° and(36.1±2.2)°,respectively.In C5-C6 and C6-C7 segments,no lower zero notch screws intersected with ATPS,and all screws are in safe posi-tions.Conclusion Lower cervical anterior pedicle screw fixation plus zero notch internal fixation can achieve successful nail placement through the selected entry point and position.

This study was aimed at creating an engineered strain of Bacillus subtilis for efficient expression of biologically active type 2 toxin B(TcdB2)derived from a highly virulent strain of Clostridium difficile.The TcdB2 gene was cloned from ST1/RT027 strain genome DNA,incorporated into the PHT01 vector,and then transformed into B.subtilis strain WB800N for prokaryotic expression.Cell toxicity assays revealed that the recombinant TcdB2 exhibited cytotoxic effects in various cells.The engineered B.subtilis strain effectively expressed biologically active TcdB2,thus providing a basis for further exploration of the pathogenic mechanisms of highly virulent strains of C.difficile and establishing a foundation for potential vaccine can-didate targets.