BACKGROUND:The micro/nanostructured gradient biomimetic surface of implant materials can simulate the structure of the extracellular environment in human bone tissue,thereby achieving perfect bone integration function.However,further research is needed on the mechanisms by which the surface microstructure of bone implant materials regulates cell function and promotes osteogenesis. OBJECTIVE:To analyze the effect of titanium sheet microstructure surface on osteogenic differentiation of MC3T3-E1 osteoblasts. METHODS:(1)At a constant voltage of 5 V or 20 V,nanotube arrays of different diameters were prepared on the surface of titanium sheets by acid etching and anodic oxidation techniques,and were recorded as group R5 and group R20,respectively.The surface morphology,roughness,and hydrophilicity of pure titanium sheet(without acid etching or anodizing treatment)were measured in group R5 and group R20.(2)MC3T3-E1 osteoblasts of logarithmic growth stage were inoculated on the surface of pure titanium sheets,R5 group and R20 group respectively.After 24 hours of osteogenic induction culture,the expression of mechanical sensitive channel protein 1 was analyzed by RT-PCR and immunofluorescence staining.Osteoblast inducible base with or without the mechanosensitive channel protein 1 activator Yada1 was added,and alkaline phosphatase staining was performed after 7 days of culture.Alizarin red staining was performed after 14 days of culture. RESULTS AND CONCLUSION:(1)The surface of pure titanium sheets was smooth under scanning electron microscope.Relatively uniform and orderly nanotube arrays with average diameters of about 30 nm and 100 nm were observed on the surface of titanium sheets of groups R5 and R20,respectively.The results of scanning electron microscope were further verified by atomic force microscopy.The surface roughness of titanium sheet of group R5 was higher than that of pure titanium(P<0.05),and the water contact angle was lower than that of pure titanium(P<0.05).The surface roughness of titanium sheet in group R20 was higher than that in group R5(P<0.05),and the water contact angle was lower than that in group R5(P<0.05).(2)RT-PCR and immunofluorescence staining showed that the expression of mechanosensitive channel protein 1 in group R5 was higher than that in pure titanium group(P<0.05),and the expression of mechanosensitive channel protein 1 in group R20 was higher than that in group R5(P<0.05).Under the osteogenic induction,compared with the condition without Yada1,there were no significant changes in the activity of alkaline phosphatase and the deposition of calcified nodules in pure titanium group after Yada1 addition,while the activity of alkaline phosphatase and the deposition of calcified nodules in groups R5 and R20 after Yada1 addition were significantly increased(P<0.05).With or without Yada1,the alkaline phosphatase activity and calcified nodule deposition in group R5 were higher than those in pure titanium group(P<0.05),and the alkaline phosphatase activity and calcified nodule deposition in group R20 were higher than those in group R5(P<0.05).(3)The results show that the surface microstructure of titanium sheet can promote the osteogenic differentiation of osteoblast MC3T3-E1 by activating mechanosensitive channel protein 1.

This article systematically reviews and verifies the medicinal materials of Dioscoreae Hypoglaucae Rhizoma（DHR）， Dioscoreae Spongiosae Rhizoma（DSR）， Smilacis Chinae Rhizoma（SCR） and Smilacis Glabrae Rhizoma（SGR） from the aspects of name， origin， producing area， quality， harvesting， processing and efficacy by consulting historical literature， in order to provide reference for the development and utilization of famous classical formulas containing the four medicinal materials. DHR， DSR， SCR and SGR have a long history of application as medicinal materials. However， due to their similar growth environment and medicinal properties， as well as their functions of promoting dampness， dispelling wind and removing numbness， there have been instances of homonymous foreign objects and homonymous synonyms throughout history， resulting in confusion of the origin. Therefore， it is necessary to conduct comparative analysis and systematic research for clarifying the historical development and changes of the four， in order to provide a basis for safe and effective medication. According to research， Bixie was first recorded in Shennong Bencaojing and has been historically known as Baizhi， Chijie， Zhumu， and other aliases. From ancient times to the mid-20th century， there has always been a situation where the rhizomes of Dioscorea plants and Smilax plants， and even the rhizomes of Heterosmilax plants， were mixed together to be used as medicinal herbs for Bixie. However， since the Tang dynasty， it has been clearly advocated that the rhizomes of Dioscorea plants have excellent quality and have been the mainstream throughout history. The 2020 edition of Chinese Pharmacopoeia categorized it into two types of medicinal herbs（DHR and DSR）. Among them， the origin of DHR is the dry rhizomes of Dioscorea hypoglauca， and the origins of DSR are the dry rhizomes of D. spongiosa and D. futschauensis. In ancient times， due to different types， the corresponding production areas of DHR and DSR were also different. Nowadays， They are mainly produced in the southern region of the Yangtze River. Since the Tang dynasty， the quality of Bixie has been characterized by its white color and soft nature. In modern times， it has been summarized that those with white color， large and thin pieces， powdery texture， tough and elastic texture， and neat and unbreakable are the best. The harvesting times of DHR and DSR are in spring or autumn， with the best quality harvested in autumn. The mainstream processing methods of them are slicing and then using the raw products or wine-processed products. SCR was first recorded in Mingyi Bielu and has been known as Jinganggen， Tielingjiao， Tieshuazi， and other aliases in history. The mainstream source is the dry rhizomes of Smilax china in the past dynasties， with the best quality being those that are tough and rich in powder. The harvesting time is from the late autumn to the following spring， and the main processing method throughout history has been slicing for raw use. SGR was first recorded under the item of Yuyuliang in Variorum of Shennong's Classic of Materia Medica. It was listed as an independent medicinal material from Bencao Gangmu. In history， there were such aliases as Cao Yuyuliang， Lengfantuan， Xianyiliang， Tubixie， etc. The main source of the past dynasties was dry rhizomes of S. glabra. In history， there have also been instances of multiple plants belonging to the same genus， and even cases of mixing the rhizomes of plants in the genus Heterosmilax. It is mainly produced in Guangdong， Hunan， Hubei， Zhejiang， Sichuan， Anhui and other regions， its quality has been summarized as large in size， powdery in texture， with few veins， and light brown in cross-section since modern times. The harvesting time is in spring or autumn， and the main processing method throughout history has been slicing for raw use. DHR， DSR， SCR and SGR all have the effects of promoting dampness， dispelling wind， relieving rheumatism and detoxifying. However， their detoxification abilities are ranked as follows：SGR>SCR>Bixie（DHR and DSR）. Especially for the treatment of limb spasms， arthralgia and myalgia， scrofula， and scabies caused by syphilis and mercury poisoning， SGR has a unique effect. Based on the research results， DHR is recommended to develop the famous classical formulas containing Bixie as the first choice for medicinal herbs. It should be harvested in autumn， sliced thinly while fresh， and processed according to the requirements of the famous classical formulas， without any requirements for raw use. Selecting the rhizomes of S. china， harvested in late autumn， and thinly sliced while fresh. If there are no special processing requirements in the formulas， use it raw. Selecting the rhizomes of S. glabra， it is harvested in autumn and thinly sliced while fresh. If there are no special processing requirements in the formulas， raw products can be used.

This paper systematically summarizes the practical experience of the 2025 Dingri earthquake emergency medical rescue in Tibet. It analyzes the requirements for earthquake medical rescue under conditions of high-altitude hypoxia, low temperature, and low air pressure. The paper provides a detailed discussion on the strategic layout of earthquake medical rescue at the national level, local government level, and through social participation. It covers the construction of rescue organizational systems, technical systems, material support systems, and information systems. The importance of building rescue teams is emphasized. In high-altitude and cold conditions, rapid response, scientific decision-making, and multi-party collaboration are identified as key elements to enhance rescue efficiency. By optimizing rescue organizational structures, strengthening the development of new equipment, and promoting telemedicine technologies, the precision and effectiveness of medical rescue can be significantly improved, providing important references for future similar disaster rescues.

Objective: To investigate the expression and functional role of FK506 binding protein 10 (FKBP10) in oral squamous cell carcinoma (OSCC), and to provide a research basis for the estimated prognosis and targeted therapy of OSCC. Methods: A total of 284 OSCC samples and 19 normal samples were selected from the Cancer Genome Atlas (TCGA) database, and diagnostic analysis was performed to determine mRNA expression. Survival analysis for FKBP10 and OSCC was conducted on a gene expression profile interaction analysis website. Real-time fluorescence quantitative PCR and Western Blot were used to detect the mRNA and protein expression of FKBP10 in four OSCC cell lines and SAS and SCC9 cells transfected with siRNA. The cell proliferation ability of FKBP10-silenced cells was detected using the CCK8 method, and the cell cycle distribution and apoptosis were detected by flow cytometry. Cell migration and invasion ability were detected through wound healing and invasion experiments. The expression changes of total protein and phosphatidylinositol 3-kinase (PI3K)-serine/threonine kinase (AKT) after FKBP10 silencing were analyzed by proteomics and Western Blot. Results: According to the analysis of gene expression levels, the mRNA expression level of FKBP10 in OSCC was significantly higher than that in normal tissues (P < 0.001). In terms of diagnosis, the expression level of FKBP10 has unique diagnostic value for OSCC (P < 0.05). The survival analysis of FKBP10 and OSCC showed that a high expression of FKBP10 led to a decrease in patient survival and poor prognosis (P < 0.05). The expression of FKBP10 mRNA and protein in OSCC cell lines was higher than that in normal oral keratinocytes (P < 0.001). Silencing FKBP10 can reduce the proliferation, invasion, and migration ability of SAS and SCC9 (P < 0.001), and also block their cell cycle in the G0/G1 phase (P < 0.001), with a significant increase in apoptosis (P < 0.05). Protein mass spectrometry and Western blot analysis revealed that FKBP10 silencing significantly downregulated the expression of multiple proteins in the RAP1 signaling pathway, mainly RAP guanine nucleotide exchange factor 1 (RAPGEF1) (P < 0.05) and the phosphorylation of PI3K-AKT proteins (P < 0.05). Conclusion FKBP10 is highly expressed in OSCC, leading to poor prognosis for patients. Downregulated FKBP10 expression can inhibit the proliferation, migration, and invasion ability of OSCC cells, hinder cell cycle progression, and promote apoptosis via the RAP1-PI3K-AKT axis. FKBP10 is a potential therapeutic target and prognostic biomarker for OSCC.

Optical imaging is highly valued for its superior temporal and spatial resolution. This is particularly important in near-infrared II (NIR-II, 1 000-3 000 nm) imaging, which offers advantages such as reduced tissue absorption, minimal scattering, and low autofluorescence. These characteristics make NIR-II imaging especially suitable for deep tissue visualization, where high contrast and minimal background interference are critical for accurate diagnosis and monitoring. Currently, inorganic fluorescent probes—such as carbon nanotubes, rare earth nanoparticles, and quantum dots—offer high brightness and stability. However, they are hindered by ambiguous structures, larger sizes, and potential accumulation toxicity in vivo. In contrast, organic fluorescent probes, including small molecules and polymers, demonstrate higher biocompatibility but are limited by shorter emission wavelengths, lower quantum yields, and reduced stability. Recently, gold clusters have emerged as a promising class of nanomaterials with potential applications in biocatalysis, fluorescence sensing, biological imaging, and more. Water-soluble gold clusters are particularly attractive as fluorescent probes due to their remarkable optical properties, including strong photoluminescence, large Stokes shifts, and excellent photostability. Furthermore, their outstanding biocompatibility—attributed to good aqueous stability, ultra-small hydrodynamic size, and high renal clearance efficiency—makes them especially suitable for biomedical applications. Gold clusters hold significant potential for NIR-II fluorescence imaging. Atomic-precision gold clusters, typically composed of tens to hundreds of gold atoms and measuring only a few nanometers in diameter, possess well-defined three-dimensional structures and clear spatial coordination. This atomic-level precision enables fine-tuned structural regulation, further enhancing their fluorescence properties. Variations in cluster size, surface ligands, and alloying elements can result in distinct physicochemical characteristics. The incorporation of different atoms can modulate the atomic and electronic structures of gold clusters, while diverse ligands can influence surface polarity and steric hindrance. As such, strategies like alloying and ligand engineering are effective in enhancing both fluorescence and catalytic performance, thereby meeting a broader range of clinical needs. In recent years, gold clusters have attracted growing attention in the biomedical field. Their application in NIR-II imaging has led to significant progress in vascular, organ, and tumor imaging. The resulting high-resolution, high signal-to-noise imaging provides powerful tools for clinical diagnostics. Moreover, biologically active gold clusters can aid in drug delivery and disease diagnosis and treatment, offering new opportunities for clinical therapeutics. Despite the notable achievements in fundamental research and clinical translation, further studies are required to address challenges related to the standardized synthesis and complex metabolic behavior of gold clusters. Resolving these issues will help accelerate their clinical adoption and broaden their biomedical applications.

Medical imaging technology plays a crucial role in clinical diagnosis and treatment. Image compression technology provides robust technical support for the storage and transmission of massive medical imaging data, serving as an effective safeguard for hospital data backup and telemedicine. The technology holds broad application prospects in the medical field, enabling the processing of various imaging modalities, multidimensional imaging, and medical video imaging. This study elaborates on general image and video compression algorithms, the application of compression algorithms in the medical field, and the performance metrics of medical image compression, thereby providing critical technical support for enhancing clinical diagnostic efficiency and data management security.

Background: and Purpose Symptomatic intracranial hemorrhage (sICH) following endovascular thrombectomy (EVT) is a severe complication associated with adverse functional outcomes and increased mortality rates. Currently, a reliable predictive model for sICH risk after EVT is lacking. Methods: This study used data from patients aged ≥20 years who underwent EVT for anterior circulation stroke from the nationwide Taiwan Registry of Endovascular Thrombectomy for Acute Ischemic Stroke (TREAT-AIS). A predictive model including factors associated with an increased risk of sICH after EVT was developed to differentiate between patients with and without sICH. This model was compared existing predictive models using nationwide registry data to evaluate its relative performance. Results: Of the 2,507 identified patients, 158 developed sICH after EVT. Factors such as diastolic blood pressure, Alberta Stroke Program Early CT Score, platelet count, glucose level, collateral score, and successful reperfusion were associated with the risk of sICH after EVT. The TREAT-AIS score demonstrated acceptable predictive accuracy (area under the curve [AUC]=0.694), with higher scores being associated with an increased risk of sICH (odds ratio=2.01 per score increase, 95% confidence interval=1.64–2.45, P<0.001). The discriminatory capacity of the score was similar in patients with symptom onset beyond 6 hours (AUC=0.705). Compared to existing models, the TREAT-AIS score consistently exhibited superior predictive accuracy, although this difference was marginal. Conclusions The TREAT-AIS score outperformed existing models, and demonstrated an acceptable discriminatory capacity for distinguishing patients according to sICH risk levels. However, the differences between models were only marginal. Further research incorporating periprocedural and postprocedural factors is required to improve the predictive accuracy.

Purpose: Adjuvant chemotherapy (AC) is recommended for muscle-invasive or lymph node-positive upper urinary tract urothelial carcinoma (UTUC) after radical nephroureterectomy (RNU). However, disease recurrences are frequently observed in pT1 disease, and AC may increase the risk of overtreatment in pT2 UTUC patients. This study aimed to validate a risk-adapted scoring model for selecting UTUC patients with ≤pT2 disease who would benefit from AC. Materials and Methods: We retrospectively analyzed 443 ≤pT2 UTUC patients who underwent RNU. A risk-adapted scoring model was applied, categorizing patients into low- or high-risk groups. Recurrence-free survival (RFS) and cancer-specific survival (CSS) were analyzed according to risk group. Results: Overall, 355 patients (80.1%) and 88 patients (19.9%) were categorized into the low- and high-risk groups, respectively, with the latter having higher pathological stages, concurrent carcinoma in situ, and synchronous bladder tumors. Disease recurrence occurred in 45 patients (10.2%), among whom 19 (5.4%) and 26 (29.5%) belonged to the low- and high-risk groups, respectively (p<0.001). High-risk patients had significantly shorter RFS (64.3% vs. 93.6% at 60 months; hazard ratio [HR] 13.66; p<0.001) and worse CSS (80.7% vs. 91.5% at 60 months; HR 4.25; p=0.002). Multivariate analysis confirmed that pT2 stage and the high-risk group were independent predictors of recurrence and cancer-specific death (p<0.001). Decision curve analysis for RFS showed larger net benefits with our model than with the T stage model. Conclusions The risk-adapted scoring model effectively predicts recurrence and identifies optimal candidates for AC post RNU in non-metastatic UTUC.