ObjectiveTo investigate the anatomical features of three-dimensional （3D） reconstruction of the hepatic pedicle based on the Laennec’s capsule， as well as its application value in the development of extra-sheath dissection/occlusion clamp and precise hepatectomy. MethodsA retrospective analysis was performed for the abdominal contrast-enhanced CT data of 100 patients without anatomical abnormalities of the hepatic pedicle in The General Hospital of Western Theater Command from January 2021 to June 2024. The Hisense CAS system combined with the 3D U-net deep learning algorithm was used for 3D reconstruction of the hepatic pedicle at the level of Laennec’s capsule， and the hepatic pedicle was measured in terms of the length， outer diameter， and angle of the main trunk and branches. An extra-sheath hepatic pedicle dissection/occlusion clamp was developed based on the above measurements， and a total of 30 patients scheduled for right hemihepatectomy were enrolled and randomly divided into device group and control group， with 15 patients in each group. The two groups were compared in terms of hepatic pedicle handling time， time of operation， intraoperative blood loss， and the incidence rate of bile duct injury. The independent-samples t test was used for comparison of continuous data between two groups， and the Fisher’s exact test was used for comparison of categorical data between two groups. ResultsThe results of 3D reconstruction revealed four variants in the main trunk branches of the hepatic pedicle， with type Ⅰ （left-right branching） accounting for 88% （88/100）， type Ⅱ （trifurcation type） accounting for 5% （5/100）， type Ⅲ （right anterior branching） accounting for 5% （5/100）， and type Ⅳ （special type） accounting for 2% （2/100）. The outer diameter of the main hepatic pedicle was 24.10±6.16 mm， the length of the left main branch was 20.59±6.38 mm， and the length of the right main branch was 21.99±7.98 mm. Compared with the control group， the device group had significantly shorter hepatic pedicle handling time （14.10±1.30 minutes vs 17.50±2.00 minutes， t=-5.620， P=0.001） and time of operation （217.00±28.28 minutes vs 241.87±19.49 minutes， t=-2.804， P=0.009）. The device group had a significantly lower incidence rate of bile duct injury than the control group （0 vs 20%， P=0.031）. Conclusion3D reconstruction based on the Laennec’s capsule can accurately display the anatomical variations of the hepatic pedicle. The extra-sheath hepatic pedicle dissection/occlusion clamp developed based on such data can optimize the process of hepatic pedicle management and improve surgical safety， and therefore， it holds promise for clinical application.

Objective To investigate the health status of workers exposed to noise in a brewery in Beijing and to analyze the relationship between hearing loss and blood pressure. Methods A total of 949 noise-exposed workers in a brewery who participated in occupational health examination were selected as the investigation subjects. A survey was conducted to investigate the pure tone hearing threshold and abnormal blood pressure of the workers with different characteristics, and to analyze the relationship between the two. Results Among the noise-exposed workers, the detection rates of hearing abnormality, hypertension, and increased systolic and diastolic blood pressure were 73.55%, 52.37%, 43.84% and 46.47%, respectively. The detection rates of hearing abnormality, indicators of hypertension, high frequency hearing threshold abnormality and increased binaural high frequency hearing threshold on average in males were higher than those in females (P < 0.05). Except that there was no statistically significant difference in weighted values of the better ear’s hearing thresholds among different working age groups (P> 0.05), the detection rates of other hearing abnormality, indicators of hypertension, speech frequency hearing threshold abnormality, high frequency hearing threshold abnormality，increased binaural high frequency hearing threshold on average and the weighted value of the better ear's hearing threshold all increased or had an increasing trend with the increase of age or working years (P< 0.05). The detection rates of hypertension in the groups with high frequency hearing threshold abnormality and increased binaural high frequency hearing threshold on average were higher than those in the normal group (P＜0.05). Conclusion The noise-exposed workers in the brewery have hearing impairment, which is related to the occurrence of hypertension. It is recommended to strengthen the publicity and education on noise protection and take protective measures to reduce the occurrence of occupational noise injury.

As artificial intelligence technology rapidly advances, its deployment within the medical sector presents substantial ethical challenges. Consequently, it becomes crucial to create a standardized, transparent, and secure framework for processing medical data. This includes setting the ethical boundaries for medical artificial intelligence and safeguarding both patient rights and data integrity. This consensus governs every facet of medical data handling through artificial intelligence, encompassing data gathering, processing, storage, transmission, utilization, and sharing. Its purpose is to ensure the management of medical data adheres to ethical standards and legal requirements, while safeguarding patient privacy and data security. Concurrently, the principles of compliance with the law, patient privacy respect, patient interest protection, and safety and reliability are underscored. Key issues such as informed consent, data usage, intellectual property protection, conflict of interest, and benefit sharing are examined in depth. The enactment of this expert consensus is intended to foster the profound integration and sustainable advancement of artificial intelligence within the medical domain, while simultaneously ensuring that artificial intelligence adheres strictly to the relevant ethical norms and legal frameworks during the processing of medical data.
Artificial Intelligence/legislation & jurisprudence* ; Humans ; Consensus ; Computer Security/standards* ; Confidentiality/ethics* ; Informed Consent/ethics*

OBJECTIVES: There is less clinical data on multiple myeloma (MM) in China, and the aim of this study was to collect and analyze the clinical data of newly diagnosed multiple myeloma (NDMM) patients in Hunan Province during 1 year, to understand the real clinical features and treatment outcome for Hunan Province patients with MM, and to strengthen the understanding of the standardized diagnosis process and treatment plan of MM. METHODS: The clinical data of 529 patients with NDMM in 12 large-scale general hospitals in Hunan Province from January 1 to December 31, 2019 were collected and analyzed, including baseline data, treatment regimens, duration of treatment, and adverse reactions. The clinical characteristics, treatment, and safety of patients were analyzed by SPSS 21.0. RESULTS: Among the 529 NDMM patients, the age was 33-90 (median 64) years and the male-female ratio was 1.38꞉1. The clinical features ranged from high to low were as follows: Bone pain (77.7%), anemia (66.8%), renal insufficiency (40.6%), hypercalcemia (15.1%). Typing: IgG 46.5%, IgA 24.6%, IgD 2.6%, IgM 0.8%, light chain 15.7%, double clone 3.0%, no secretion 0.6%, absence 6.2%. Staging: Durie-Salmon stage I, II, and III were 4.5%, 10.6%, 77.3%, respectively, and 40 cases (7.6%) missed this data. International Staging System (ISS) stage I, II, and III were 10.4%, 24.4%, and 47.6%, respectively, and 93 cases (17.6%) were missing. Revised International Staging System (R-ISS) stage I, II, and III were 5.5%, 27.0%, 23.1%, respectively, and 235 cases (44.4%) missed this data. Among the 98 NDMM patients in the Third Xiangya Hospital, Central South University, Durie-Salmon (DS) stage missing 2.0%, ISS stage missing 12.3%, and R-ISS stage missing 12.3%.Treatment: Among the 529 patients,475 received treatment, the rate of treatment was 89.8%; 67.4% of the patients were able to complete four courses of chemotherapy at induction phase, 90.3% of the patients received proteasome inhibitor based combination chemotherapy regimen more than once, 67.2% received immunomodulator based regimen more than once, and 59.8% of the patients received proteasome inhibitor and immunomodulator based combination chemotherapy regimen more than once. Curative: Overall response rate (ORR) and high quality response rate (HQR) of the 4-course group were better than those of the 2-course group (ORR: 85% vs 65%, P=0.006; HQR: 68.3% vs 24.0%, P<0.001). The HQR of the standard chemotherapy group was better than that of the non-standard chemotherapy group (65.1% vs 48.2%, P=0.035). Adverse reactions during treatment included hematologic toxicity (17.5%), peripheral neuropathy (24.8%), gastrointestinal adverse events (23.8%), pulmonary infection (25.9%), herpes zoster (4.6%), and venous thrombotic events (1.7%). CONCLUSIONS In 2019, the missed diagnosis rate of MM patients was high, the medium age of diagnosis was older, and the accuracy of patient diagnosis was not high. There is a great difference among medical centers, especially in the stage and risk stratified, nearly half of NDMM patients are not diagnosed with R-ISS stage; the lack of cytogenetic data needs to be supplemented by follow-up studies. A high proportion of patients with NDMM present with bone pain and anemia.Patients received treatment have higher use of chemotherapy regimens containing proteasome inhibitors and/or immunomodulators, but there is a significant gap among different medical centers, and standardized treatment needs to be strengthened. The safety during chemotherapy is controllable.
Antineoplastic Combined Chemotherapy Protocols/therapeutic use* ; Female ; Humans ; Immunologic Factors/therapeutic use* ; Male ; Middle Aged ; Multiple Myeloma/therapy* ; Neoplasm Staging ; Pain ; Prognosis ; Proteasome Inhibitors/therapeutic use*

Objective: To investigate the prevalence and risk factors of occupational musculoskeletal disorders among workers in heavy-duty automobile parts factories in Beijing Municipality, so as to provide insights into development of effective interventions for occupational musculoskeletal disorders. Methods: The workers in three heavy-duty automobile truck parts factories in Beijing Municipality were recruited using the convenient sampling method during the period from May 2019 to October 2020. Subjects' demographic characteristics, type of job and prevalence of occupational musculoskeletal disorders at various sites were collected using self-designed electronic questionnaires, and the factors affecting the development of occupational musculoskeletal disorders were identified using a multivariable logistic regression model. Results: A total of 264 workers were enrolled, including 260 males (98.48%) and 4 females (1.52%). The participants had a mean age of (31.71±6.13) years, and mean duration of (7.51±5.25) years at current position, and mechanical technician was the major type of work (129 workers, 48.86%). The prevalence of occupational musculoskeletal disorders was 70.08% among the participants, and high prevalence of occupational musculoskeletal disorders was found in the lower back/waist (41.28%), shoulder (40.15%), neck (39.02%) and upper back (33.33%). Multivariable logistic regression analysis identified females (OR=1.280, 95%CI: 1.021-1.602) and head-down posture at work (OR=2.644, 95%CI: 1.034-6.763) as risk factors for occupational musculoskeletal disorders at neck; females (OR=1.633, 95%CI: 1.624-2.117), sheet metal workers, mechanical technicians and painters (OR: 5.811-10.452, 95%CI: 1.205-54.027), working in an uncomfortable posture (OR：1.376-7.749, 95%CI: 1.034-27.270) and frequent working overtime (OR=2.081, 95%CI: 1.192-4.137) as risk factors for occupational musculoskeletal disorders at shoulder; and sheet metal workers, mechanical technicians and painters (OR: 8.760-11.948, 95%CI: 1.630-66.927), working in an uncomfortable posture (OR：4.067-12.185, 95%CI: 1.332-47.523) and frequent working overtime (OR=2.201, 95%CI: 1.142-4.244) as risk factors for occupational musculoskeletal disorders at waist/back. Conclusions The prevalence of occupational musculoskeletal disorders is high among workers in heavy-duty automobile parts factories, which mainly occur at shoulder, neck, waist and back. Type of work, working posture and working duration are main factors affecting the development of occupational musculoskeletal disorders.

Objective: To explore the efficacy and feasibility of transanal hand-sewn reinforcement of low stapled anastomosis in preventing anastomotic leak after transanal total mesorectal excision (taTME). Methods: A descriptive cohort study was conducted. Clinical data of 51 patients with rectal cancer who underwent taTME with transanal hand-sewn reinforcement of low stapled anastomosis at Department of Colorectal Surgery, the Sixth Affiliated Hospital of Sun Yat-sen University from January 2019 to December 2020 were retrospectively collected. Inclusion criteria: (1) age >18 years old; (2) rectal cancer confirmed by preoperative pathology; (3) distance from tumor to anal verge ≤ 8 cm according to pelvic MR; (4) the lesion was evaluated to be resectable before operation; (5) with or without neoadjuvant chemotherapy and radiotherapy; (6) taTME, end-to-end stapled anastomosis, and reinforcement in the anastomosis with absorbable thread intermittently were performed, and the distance between anastomosis and anal verge was ≤ 5 cm. Exclusion criteria: (1) previous history of colorectal cancer surgery; (2) emergency surgery due to intestinal obstruction, bleeding or perforation; (3) patients with local recurrence or distant metastasis; (4) the period of postoperative follow-up less than 3 months. The procedure of transanal hand-sewn reinforcement was as follows: firstly, no sign of bleeding was confirmed after checking the anastomosis. Then, the anastomosis was reinforced by suturing the muscle layer of rectum intermittently in a figure-of-eight manner using 3-0 single Vicryl. The entry site of the next suture was close next to the exit site of the last one. Any weak point of the anastomosis could also be reinforced according to the specimen from the circular stapler. The primary outcome were the incidence of anastomotic leak, methods of the secondary operation, anastomotic infection, anastomotic stricture, and conditions of Intraoperative and postoperative. Results: All the 51 enrolled patients completed surgery successfully without any conversion to open surgery. The median operative time was 169 (109-337) minutes, and the median intraoperative blood loss was 50 (10-600) ml. The median postoperative hospital stay was 8 (5-16) days. The mssorectum was complete and distal resection margin was negative in all patients. Postive circumferential resection margin was observed in 1 patients (2.0%). Twelve (23.5%) patients underwent prophylactic ileostomy. One patient developed anastomosis stricture which was cured by digital dilatation of the anastomosis. ISREC grade C anastomotic leak was observed in 3 (5.9%) male patients, of whom 2 cases did not received prophylactic ileostomy during the operation, and were cured by a second operation with the ileostomy and anastomotic repair. The other one healed by transanal repair of the anastomosis and anti-infection therapy. One (2.0%) patient suffered from perianal infection and healed by sitz bath and anti-infection therapy. No death was reported within 30 days after operation. Conclusion: Transanal hand-sewn reinforcement in low rectal stapled anastomosis in preventing anastomotic leak after taTME is safe and feasible.
Adolescent ; Anal Canal/surgery* ; Anastomosis, Surgical ; Anastomotic Leak/prevention & control* ; Cohort Studies ; Humans ; Laparoscopy ; Male ; Postoperative Complications/prevention & control* ; Rectal Neoplasms/surgery* ; Rectum/surgery* ; Retrospective Studies ; Treatment Outcome

BACKGROUND: Coronary atherosclerotic plaque could go through rapid progression and induce adverse cardiac events. This study aimed to evaluate the impacts of smoking status on clinical outcomes of coronary non-target lesions. METHODS: Consecutive patients with coronary heart disease who underwent two serial coronary angiographies were included. All coronary non-target lesions were recorded at first coronary angiography and analyzed using quantitative coronary angiography at both procedures. Patients were grouped into non-smokers, quitters, and smokers according to their smoking status. Clinical outcomes including rapid lesion progression, lesion re-vascularization, and myocardial infarction were recorded at second coronary angiography. Multivariable Cox regression analysis was used to investigate the association between smoking status and clinical outcomes. RESULTS: A total of 1255 patients and 1670 lesions were included. Smokers were younger and more likely to be male compared with non-smokers. Increase in percent diameter stenosis was significantly lower (2.7 [0.6, 7.1] % vs. 3.5 [0.9, 8.9]%) and 3.4 [1.1, 7.7]%, P = 0.020) in quitters than those in smokers and non-smokers. Quitters tended to have a decreased incidence of rapid lesions progression (15.8% [76/482] vs. 21.6% [74/342] and 20.6% [89/431], P = 0.062), lesion re-vascularization (13.1% [63/482] vs. 15.5% [53/432] and 15.5% [67/431], P = 0.448), lesion-related myocardial infarction (0.8% [4/482] vs. 2.6% [9/342] and 1.4% [6/431], P = 0.110) and all-cause myocardial infarction (1.9% [9/482] vs. 4.1% [14/342] and 2.3% [10/431], P = 0.128) compared with smokers and non-smokers. In multivariable analysis, smoking status was not an independent predictor for rapid lesion progression, lesion re-vascularization, and lesion-related myocardial infarction except that a higher risk of all-cause myocardial infarction was observed in smokers than non-smokers (hazards ratio: 3.00, 95% confidence interval: 1.04-8.62, P = 0.042). CONCLUSION Smoking cessation mitigates the increase in percent diameter stenosis of coronary non-target lesions, meanwhile, smokers are associated with increased risk for all-cause myocardial infarction compared with non-smokers.

Currently, the systems for culturing buffalo spermatogonial stem cells (SSCs) in vitro are varied, and their effects are still inconclusive. In this study, we compared the effects of culture systems with undefined (foetal bovine serum) and defined (KnockOut Serum Replacement) materials on the in vitro culture of buffalo SSC-like cells. Significantly more DDX4- and UCHL1-positive cells (cultured for 2 days at passage 2) were observed in the defined materials culture system than in the undefined materials system (p < 0.01), and these cells were maintained for a longer period than those in the culture system with undefined materials (10 days vs. 6 days). Furthermore, NANOS2 (p < 0.05), DDX4 (p < 0.01) and UCHL1 (p < 0.05) were expressed at significantly higher levels in the culture system with defined materials than in that with undefined materials. Induction with retinoic acid was used to verify that the cultured cells maintained SSC characteristics, revealing an SCP3⁺ subset in the cells cultured in the defined materials system. The expression levels of Stra8 (p < 0.05) and Rec8 (p < 0.01) were significantly increased, and the expression levels of ZBTB16 (p < 0.01) and DDX4 (p < 0.05) were significantly decreased. These findings provided a clearer research platform for exploring the mechanism of buffalo SSCs in vitro.

Buffaloes ; Cells, Cultured ; In Vitro Techniques ; Primary Cell Culture ; Stem Cells ; Tretinoin

Currently, the systems for culturing buffalo spermatogonial stem cells (SSCs) in vitro are varied, and their effects are still inconclusive. In this study, we compared the effects of culture systems with undefined (foetal bovine serum) and defined (KnockOut Serum Replacement) materials on the in vitro culture of buffalo SSC-like cells. Significantly more DDX4- and UCHL1-positive cells (cultured for 2 days at passage 2) were observed in the defined materials culture system than in the undefined materials system (p < 0.01), and these cells were maintained for a longer period than those in the culture system with undefined materials (10 days vs. 6 days). Furthermore, NANOS2 (p < 0.05), DDX4 (p < 0.01) and UCHL1 (p < 0.05) were expressed at significantly higher levels in the culture system with defined materials than in that with undefined materials. Induction with retinoic acid was used to verify that the cultured cells maintained SSC characteristics, revealing an SCP3⁺ subset in the cells cultured in the defined materials system. The expression levels of Stra8 (p < 0.05) and Rec8 (p < 0.01) were significantly increased, and the expression levels of ZBTB16 (p < 0.01) and DDX4 (p < 0.05) were significantly decreased. These findings provided a clearer research platform for exploring the mechanism of buffalo SSCs in vitro.