ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Cosmetics may be an important source of human exposure to per-and polyfluoroalkyl substances(PFASs),posing risks to human health.In this study,a nontarget screening method for PFASs in cosmetics was developed using ultra-high performance liquid chromatography-high-resolution mass spectrometry(UHPLC-Q-Orbitrap HRMS)based on the Kendrick mass defect(KMD).The sample was extracted by ultrasonic assisted extraction prior to being analyzed by UHPLC-Q-Orbitrap HRMS.Acquisition of HRMS data was achieved in both full scan and data-dependent(Full MS/dd MS2)mode.The data collected by HRMS were imported into an in-lab built R script for processing.Samples retained the mass spectra peaks with KMD values in the range of 0.85-1 or 0-0.15 for in-and out-of-library matching;when KMD deviation(δKMD)<0.001 and CF 2 mass error(δMS)<15 ppm,it was considered as a potential PFASs homologues.According to matches of parent ions(MS),fragment ions(MS2)and retention time(RT)with the in-house built PFASs database,the screened and identified potential PFASs were categorized to 5 confidence levels(CL1-CL5).A total of 15 kinds of PFASs homologues with confidence level of CL3 and above were screened from 13 cosmetics products and 8 cosmetic raw materials,including perfluoroalkyl alcohol,hydroperfluoroalkyl sulfonic acid,chloroperfluoroalkyl sulfonic acid,etc.with concentrations ranging from 1.9 ng/g to 98.1 ng/g.The nontarget screening method could be used to screen and identify PFASs homologues feasibly and therefore provided data basis for management and control of PFASs addition in cosmetics.

The telomere structure in the cell nucleus is crucial for maintaining the stability and functions of chromosomes.Telomerase is a ribonucleoprotein reverse transcriptase,which catalyzes the elongation of telomeres using its own RNA as a template,thereby counteracting the shortening of telomeres caused by chromosome replication and cell division.Due to its overexpression in over 85％of malignant tumor cells,telomerase has emerged as a highly promising biomarker and a novel target for cancer therapy.In recent years,given the importance of precise quantification of telomerase activity in guiding medical diagnosis and treatment strategies,researchers have developed various high-performance telomerase detection techniques.Among these,electrochemical biosensing technique has cause much attention due to its high sensitivity,operational convenience,rapid response,and ease of miniaturization.This paper focused on the latest advances in electrochemical sensing technique for detection of telomerase activity,aiming to provide inspiration for designing novel telomerase activity detection strategies by elucidating three unique properties of telomerase primer extension products.

Gender recognition based on the analysis of fingerprint residue can assist investigators in narrowing down the scope of investigation and play an important role in the field of criminal investigation.This study established a quantitative analysis method for lipid substances in fingerprints based on gas chromatography-mass spectrometry(GC-MS).Fatty acids in fingerprints were methylated using sulfuric acid methanol derivatization reagent(7%,V/V),the extraction reagent was dichloromethane-methanol(1∶1,V/V)solution,the reaction temperature was 70℃and the heating time was 45 min.Quantitative analysis of the relative content of 23 kinds of fatty acids and squalene in fingerprints residue by different genders was conducted,and orthogonal partial least squares-discriminant analysis(OPLS-DA)was used to reduce the dimensionality of the quantitative results.A total of 13 kinds of components in the fingerprints were selected to maximize the difference in relative content between male and female fingerprints.Three machine learning models,including binary logistic regression(BLR),support vector machine(SVM)and random forest(RF),were further used as feature variables to classify the gender of fingerprints.The classification performance of each model was compared through five indicators,and it was found that the most suitable model for binary classification of fingerprint gender was SVM model.The results showed that the SVM fingerprint residual gender binary classification model established based on the relative content data of 13 kinds of lipid substances in fingerprints achieved a classification accuracy of 90%and an area under the receiver operating characteristic curve(AUC)value of 0.98.This study provided a new research method for detecting lipid components in fingerprints and a methodological basis for gender recognition of fingerprints.

In this study,a sensitive lateral flow immunoassay(LFIA)platform based on carbon dots-mesoporous silica nanocomposite(CD-MSNs)fluorescent probes was constructed for high-performance detection of inflammatory marker interleukin-6(IL-6).Green fluorescent carbon dots(CDs)were prepared by hydrothermal method with 3,9-perylenic acid and 3-aminopropyltriethoxysilane(APTES)as raw materials,and highly fluorescent CD-MSNs composites were then constructed by encapsulating the prepared CDs in mesoporous silica nanoparticles(MSNs).Fluorescent probes were prepared by covalent coupling of CD-MSNs with IL-6 antibody.Fluorescent immunochromatographic test strips were constructed by spraying IL-6 capture antibody and goat anti-mouse IgG on nitrocellulose membrane as detection line(T-line)and quality control line(C-line),respectively.The fluorescence immunoassay analyzer was used to quantitatively detect the fluorescence intensity of T-line,and the experimental results showed that the LFIA platform based on this probe had a good linear relationship in IL-6 concentration range of 102-106 pg/mL,and the detection limit was 64 pg/mL,which was two orders of magnitude more sensitive than that of the traditional colloidal gold test strips.This method effectively solved the issue of insufficient sensitivity of traditional LFIA technique,and provided a rapid and highly sensitive detection method for early diagnosis of inflammatory diseases.

Forensic medicine has been designated as a first-level discipline,presenting new opportunities and challenges for the development of forensic medicine.Since the 1980s,the establishment of foren-sic medicine discipline and the cultivation of high-level forensic talents have become hot topics in the development of forensic medicine in China.Since the 13th Five-Year Plan,the forensic team of Shanxi Medical University has been aiming at the forefront,proposing the development goals of"Five First-class"and the discipline development path"Six Major Achievements".It has selected benchmark disci-plines,identified gaps in disciplinary development,unified thoughts,formulated completion timelines,concentrated superior resources,assigned tasks to individuals,and created an"Organized Fill-in-the-Blank Format"forensic medicine discipline construction model with the characteristics of the new era.The construction model of forensic medicine has achieved good results in the goals,discipline frame-work,scientific research,talent cultivation,discipline team and platform construction,forming a rela-tively complete discipline construction and management system,and accumulating valuable experience for the construction of first-level discipline and high-level talent cultivation of forensic medicine.

Objective:To investigate the role and potential mechanism of m 6A demethylase ALKBH5 in esophageal squamous cell carcinoma (ESCC) . Methods:Real time fluorogenic quantitative PCR and Western blotting were used to detect ALKBH5 expression in normal esophageal epithelial cells (Het-1A) and ESCC cell lines (Eca109, KYSE30, KYSE150, KYSE410). Transient cell lines with overexpression/knockdown of ALKBH5 (siRNA transfection was divided into si-ALKBH5-1 group and si-ALKBH5-2 group) and control cell lines were constructed. The effects of ALKBH5 on ESCC cell proliferation, migration and apoptosis were studied by MTT assay, cell scratch assay and cell apoptosis assay respectively. The differentially expressed gene was screened by the intersection of RNA sequencing (RNA-seq) and methylated RNA immunoprecipitation sequencing (MeRIP-seq) techniques, and the effect of ALKBH5 on the gene expression was detected by RT-qPCR.Results:Real time fluorogenic quantitative PCR results showed that, the relative expression levels of ALKBH5 RNA in Het-1A, Eca109, KYSE30, KYSE150 and KYSE410 were 1.03±0.28, 0.46±0.02, 0.23±0.10, 0.04±0.02, 0.05±0.00, respectively, with a statistically significant difference ( F=444.60, P<0.001). Western blotting showed that, the relative expression levels of ALKBH5 protein in Het-1A, Eca109, KYSE30, KYSE150 and KYSE410 were 1.14±0.03, 0.88±0.04, 0.66±0.01, 0.69±0.01, 0.95±0.01, respectively, with a statistically significant difference ( F=139.90, P<0.001). MTT test showed that the absorbance ( A) values of KYSE30 control group and ALKBH5 overexpression group were 0.86±0.01 and 1.25±0.01 after 72 hours, respectively, with a statistically significant difference ( t=46.93, P<0.001). The A values of KYSE150 control group and ALKBH5 overexpression group were 1.00±0.03 and 1.43±0.02 after 72 hours, respectively, with a statistically significant difference ( t=16.80, P<0.001). The A values of KYSE30 control group, si-ALKBH5-1 group and si-ALKBH5-2 group were 0.98±0.01, 0.85±0.02 and 0.80±0.09 after 96 hours, respectively, with a statistically significant difference ( F=72.97, P<0.001). The A values of KYSE30 control group were higher than those of si-ALKBH5-1 and si-ALKBH5-2 groups (both P<0.001). The A values of KYSE410 control group, si-ALKBH5-1 group and si-ALKBH5-2 group were 1.28±0.02, 1.15±0.02 and 1.08±0.05 after 72 hours, respectively, with a statistically significant difference ( F=16.97, P=0.003). The A values in KYSE410 control group were higher than those in si-ALKBH5-1 group and si-ALKBH5-2 group ( P=0.020; P=0.003). The cell scratch test showed that 48 hours after scratch, the migration rates of KYSE30 cells in control group and ALKBH5 overexpression group were (27.39±0.54) % and (48.89±5.12) %, respectively, with a statistically significant difference ( t=5.90, P=0.004). The migration rates of KYSE150 cells in control group and ALKBH5 overexpression group were (39.67±0.43) % and (62.20±0.60) %, respectively, with a statistically significant difference ( t=43.15, P<0.001). The migration rates of KYSE30 cells in control group, si-ALKBH5-1 group and si-ALKBH5-2 group were (25.08±1.86) %, (18.75±1.59) % and (7.67±0.52) %, respectively, with a statistically significant difference ( F=74.28, P<0.001). The migration rates of KYSE30 cells in control group were higher than those of si-ALKBH5-1 group and si-ALKBH5-2 group ( P=0.010; P<0.001). The migration rates of KYSE410 cells in control group and si-ALKBH5-1 group, si-ALKBH5-2 group were (38.70±0.41) %, (28.27±1.01) % and (19.40±0.47) %, respectively, with a statistically significant difference ( F=400.20, P<0.001). The migration rates of KYSE410 cells in control group were higher than those of si-ALKBH5-1 group and si-ALKBH5-2 group (both P<0.001). Apoptosis test showed that the apoptosis rates of KYSE30 cells in control group and ALKBH5 overexpression group were (9.59±0.88) % and (4.81±0.89) %, respectively, with a statistically significant difference ( t=6.23, P=0.006). The apoptosis rates of KYSE150 cells in control group and ALKBH5 overexpression group were (8.36±0.09) % and (6.42±0.19) %, respectively, with a statistically significant difference ( t=12.90, P<0.001). The apoptosis rates of KYSE30 cells in control group, si-ALKBH5-1 group and si-ALKBH5-2 group were (4.31±0.19) %, (5.72±0.30) % and (8.94±0.71) %, respectively, with a statistically significant difference ( F=53.46, P<0.001). The apoptosis rates in KYSE30 cells in control group were lower than those in si-ALKBH5-1 group and si-ALKBH5-2 group ( P=0.049; P<0.001). The apoptosis rates of KYSE410 control group, si-ALKBH5-1 group and si-ALKBH5-2 group were (4.45±0.36) %, (5.40±0.11) % and (6.64±0.15) %, respectively, with a statistically significant difference ( F=43.36, P<0.001). The apoptosis rates in KYSE410 cells in control group were lower than those in si-ALKBH5-1 group and si-ALKBH5-2 group ( P=0.016; P<0.001). The differentially expressed gene IGF2BP3 was screened by the intersection of RNA-seq and MeRIP-seq techniques, and the RT-qPCR results showed that, the relative expression levels of IGF2BP3 in KYSE30 were 1.01±0.10 and 1.41±0.10 in control group and ALKBH5 overexpression group, respectively, with a statistically significant difference ( t=4.06, P=0.015). The relative expression levels of IGF2BP3 in KYSE150 were 1.00±0.10 and 1.94±0.24 in control group and ALKBH5 overexpression group, respectively, with a statistically significant difference ( t=5.08, P=0.007). The relative expression levels of IGF2BP3 in KYSE410 were 1.01±0.14, 0.67±0.04 and 0.41±0.04 in control group, si-ALKBH5-1 group and si-ALKBH5-2 group, respectively, with a statistically significant difference ( F=24.36, P=0.001). The relative expression levels of IGF2BP3 in KYSE410 control group were higher than those in si-ALKBH5-1 group and si-ALKBH5-2 group ( P=0.017; P=0.001) . Conclusions:ALKBH5 is underexpressed in ESCC cell lines, but the overexpression of ALKBH5 can promote the proliferation and migration of ESCC cells and inhibit cell apoptosis, which may be related to some negative feedback regulation mechanism. IGF2BP3 may be the downstream target of ALKBH5.

BACKGROUND:The Twin-block orthodontic appliance is commonly used for the correction of Class Ⅱ malocclusion.Its mechanism of action in stimulating mandibular growth has been confirmed in many studies,but its impact on maxillary growth is not very clear. OBJECTIVE:By establishing a finite element model to analyze the stress distribution of the maxillary complex,surrounding bone sutures,and maxillary dentition in patients with Class Ⅱ malocclusion wearing Twin-block orthodontic appliances. METHODS:One patient with Class Ⅱ malocclusion who underwent orthodontic treatment at Qingdao Hospital/Qingdao Municipal Hospital of Shandong Rehabilitation University was selected.The bite force data of the patient when wearing the Twin-block orthodontic appliance was measured,and CBCT data were collected.A finite element model was established,including the maxillary complex,peripheral sutures,Twin-block orthodontic appliance,and maxillary dentition.ABAQUS software was used to simulate the stress distribution in the maxilla and maxillary dentition when the patient was wearing the Twin-block appliance. RESULTS AND CONCLUSION:The equivalent stress on the maxillary anterior teeth was significantly smaller than that on the posterior teeth,and the maximum equivalent stress on both sides of the teeth were 4.797 5 Mpa and 8.716 1 Mpa,respectively,which were located at the first premolar.The maximum displacements were presented at the maxillary incisors on both sides of the teeth,which were 0.080 5 mm and 0.081 0 mm,respectively.The maximum equivalent stress on the bone suture was 1.284 Mpa,which was mainly concentrated in the pterygopalatine suture and the frontal-maxillary suture on both sides,and there was almost no difference in the force of the rest of bone sutures;the maximum displacement of the bone suture was 0.07 mm,with the pterygopalatine suture having the largest displacement,followed by the frontal-maxillary suture.The maximal equivalent stress on the maxillary complex was 27.18 Mpa,which was mainly concentrated on both sides of the anterior pyriform foramen of the maxilla,around the nasofrontal suture and around the pterygopalatine suture at the posterior part of the jaws.The maximal displacement of the maxilla was 0.07 mm,which was mainly concentrated on the maxillary alveolar bone.All these findings show that the occlusal force acts on the maxillary complex through the Twin-block appliance,resulting in clockwise rotation of the maxilla and steepening of the dentition plane.Measures should be taken to compensate for this tendency,for example,by considering maxillary molar elongation and intrusion in the process of occlusion,which are not only able to flatten the occlusal plane,but facilitate the mandibular protraction,thereby further improving Class Ⅱ malocclusion orthodontic treatment.

Metabolites produced as intermediaries or end-products of microbial metabolism provide crucial signals for health and diseases, such as metabolic dysfunction-associated steatotic liver disease (MASLD). These metabolites include products of the bacterial metabolism of dietary substrates, modification of host molecules (such as bile acids [BAs], trimethylamine-N-oxide, and short-chain fatty acids), or products directly derived from bacteria. Recent studies have provided new insights into the association between MASLD and the risk of developing chronic kidney disease (CKD). Furthermore, alterations in microbiota composition and metabolite profiles, notably altered BAs, have been described in studies investigating the association between MASLD and the risk of CKD. This narrative review discusses alterations of specific classes of metabolites, BAs, fructose, vitamin D, and microbiota composition that may be implicated in the link between MASLD and CKD.

The effect of Huanglian Jiedu Decoction on the intestinal flora of type 2 diabetes mellitus(T2DM) was investigated using 16S rRNA sequencing technology. Sixty rats were randomly divided into a normal group(10 rats) and a modeling group(50 rats). After one week of adaptive feeding, a high-fat diet + streptozotocin was given for modeling, and fasting blood glucose >16.7 mmol·L~(-1) was considered a sign of successful modeling. The modeling group was randomly divided into the model group, high-, medium-, and low-dose groups of Huanglian Jiedu Decoction, and metformin group. After seven days of intragastric treatment, the feces, colon, and pancreatic tissue of each group of rats were collected, and the pathological changes of the colon and pancreatic tissue of each group were observed by hematoxylin-eosin staining. The changes in the intestinal flora structure of each group were observed by the 16S rRNA sequencing method. The results showed that compared with the model group, the high-, medium-, and low-dose of Huanglian Jiedu Decoction reduced fasting blood glucose levels to different degrees and showed no significant changes in body weight. The number of islet cells increased, and intestinal mucosal damage attenuated. Alpha diversity analysis revealed that Huanglian Jiedu Decoction reduced the abundance and diversity of intestinal flora in rats with T2DM; at the phylum level, low-and mediam-dose of Huanglian Jiedu Decoction reduced the abundance of Bacteroidota, Proteobacteria, and Desulfobacterota and increased the abundance of Firmicute and Bacteroidota/Firmicutes, while the high-dose of Huanglian Jiedu Decoction increased the relative abundance of Proteobacteria and Bacteroidota/Firmicutes ratio, and decreaseal the relative; abundance of Firmicute; at the genus level, Huanglian Jiedu Decoction increased the relative abundance of Allobaculum, Blautia, and Lactobacillus; LEfse analysis revealed that the biomarker of low-and medium-dose groups of Huanglian Jiedu Decoction was Lactobacillus, and the structure of the intestinal flora of the low-dose group of Huanglian Jiedu Decoction was highly similar to that of the metformin group. PICRUSt2 function prediction revealed that Huanglian Jiedu Decoction mainly affected carbohydrate and amino acid metabolic pathways. It suggested that Huanglian Jiedu Decoction could reduce fasting blood glucose and increase the number of islet cells in rats with T2DM, and its mechanism of action may be related to increasing the abundance of short-chain fatty acid-producing strains and Lactobacillus and affecting carbohydrate and amino acid metabolic pathways.
Animals ; Drugs, Chinese Herbal/administration & dosage* ; Diabetes Mellitus, Type 2/metabolism* ; Gastrointestinal Microbiome/drug effects* ; Rats ; Male ; Rats, Sprague-Dawley ; Humans ; Bacteria/drug effects* ; Blood Glucose/metabolism*