For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

For middle-aged and elderly patients with conditions such as spinal fractures and degenerative spinal diseases, spinal internal fixation is a core surgical procedure for reconstructing spinal stability, heavily relying on the biomechanical stability provided by pedicle screw systems. Whereas, these patients are often complicated by osteoporosis that can significantly compromise the stability of the bone-pedicle screw interface, leading to a marked increase in pedicle screw loosening and surgical failure rates. The bone cement-augmented pedicle screw technique, which involves injecting bone cement into the vertebral body or screw trajectory to optimize the mechanical properties of the bone-pedicle screw composite, has been proven to significantly enhance fixation strength and effectively prevent screw-related failures, thereby reducing the incidence of internal fixation failure in high-risk populations undergoing spinal fusion. However, the widespread clinical application of this technique has faced challenges such as inaccurate clinical decision-making (indication and contraindication selection), non-standardized operative practices, and insufficient awareness of complication prevention, resulting in considerable variability in clinical outcomes and even severe complications. To address this, Prof. Luo Fei from First Affiliated Hospital of Army Medical University initiated the project and the Chinese Association Orthopaedic Surgeons organized relevant experts to develop the Evidence-based clinical practice guideline for bone cement-augmented pedicle screw technique ( version 2025), based on current evidence. The guidelines put forward 8 recommendations regarding the clinical value, scope of application, and operational standards of the technique, aiming to provide evidence-based medical support and technical standardization for clinical decision-making.

BACKGROUND:The AO12-C type middle-proximal humeral fractures are usually caused by high-energy injuries,accompanied by comminuted fractures and a large number of butterfly-shaped bone fragments.These fractures are difficult to achieve good reduction and effective fixation.With the increasing understanding of the biological characteristics of bone and soft tissue,surgical treatment is gradually shifting towards minimally invasive steel plates and intramedullary nail fixation.However,there has been no consensus on which is the best surgical technique for treating humeral fractures in minimal invasive plate osteosynthesis and intramedullary nail.OBJECTIVE:To compare the clinical effect of minimal invasive plate osteosynthesis and intramedullary nail for treating AO12-C type middle-proximal humeral fractures.METHODS:A retrospective analysis was performed in 36 patients with AO12-C type middle-proximal humeral fracture who met the inclusion criteria admitted to the Guizhou Hospital of Beijing Jishuitan Hospital from January 2020 to December 2022.All patients were assigned to minimal invasive plate osteosynthesis group(18 cases)and intramedullary nail group(18 cases)according to the surgical treatment plan.The minimal invasive plate osteosynthesis group received minimally invasive plate osteosynthesis based on preoperative planning assisted by 3D printing,while the intramedullary nail group received intramedullary nail internal fixation.Operation time,intraoperative blood loss,hospital stay,and fracture healing time were compared between the two groups.Visual analog scale score at 1,3,and 6 months after surgery,shoulder joint function,Constant-Murley score,Quick Disabilities of the Arm,Shoulder and Hand(QuickDASH)score,and complications of the shoulder joint at the last follow-up were compared between the two groups.RESULTS AND CONCLUSION:(1)All patients were followed-up for average(15.56±4.05)months,and no difference was observed in hospital stay and fracture healing time between the two groups(P＞0.05).The minimal invasive plate osteosynthesis group had shorter operation time compared to the intramedullary nail group(P＜0.05).The intramedullary nail group had less intraoperative blood loss between the two groups of patients(P＜0.05).(2)In the intramedullary nail group,at 1 and 3 months after operation,the visual analog scale score was significantly lower than the minimal invasive plate osteosynthesis group(P＜0.05).No difference was observed in the visual analog scale in long-term follow-up,shoulder joint function,Constant-Murley score,Quick Disabilities of the Arm,Shoulder and Hand(QuickDASH)score at the last follow-up between the two groups(P＞0.05).(3)No complications such as nonunion or wound infection occurred in either group.Two cases of radial nerve palsy occurred in minimal invasive plate osteosynthesis group,both of which recovered within 3 months.The intramedullary nail group had 1 case of rotator cuff injury.There was no significant difference in the rate of complications between the two groups(P＞0.05).(4)To conclude,minimal invasive plate osteosynthesis and intramedullary nail can achieve good clinical efficacy in the treatment of AO12-C type middle-proximal humeral fractures,effectively improving shoulder joint function in patients.However,minimal invasive plate osteosynthesis exhibits obvious advantages in shorter surgical time with the assistance of 3D printing,which is a valuable,effective,and safe method for treating AO12-C type middle-proximal humeral fractures.

BACKGROUND:The AO12-C type middle-proximal humeral fractures are usually caused by high-energy injuries,accompanied by comminuted fractures and a large number of butterfly-shaped bone fragments.These fractures are difficult to achieve good reduction and effective fixation.With the increasing understanding of the biological characteristics of bone and soft tissue,surgical treatment is gradually shifting towards minimally invasive steel plates and intramedullary nail fixation.However,there has been no consensus on which is the best surgical technique for treating humeral fractures in minimal invasive plate osteosynthesis and intramedullary nail.OBJECTIVE:To compare the clinical effect of minimal invasive plate osteosynthesis and intramedullary nail for treating AO12-C type middle-proximal humeral fractures.METHODS:A retrospective analysis was performed in 36 patients with AO12-C type middle-proximal humeral fracture who met the inclusion criteria admitted to the Guizhou Hospital of Beijing Jishuitan Hospital from January 2020 to December 2022.All patients were assigned to minimal invasive plate osteosynthesis group(18 cases)and intramedullary nail group(18 cases)according to the surgical treatment plan.The minimal invasive plate osteosynthesis group received minimally invasive plate osteosynthesis based on preoperative planning assisted by 3D printing,while the intramedullary nail group received intramedullary nail internal fixation.Operation time,intraoperative blood loss,hospital stay,and fracture healing time were compared between the two groups.Visual analog scale score at 1,3,and 6 months after surgery,shoulder joint function,Constant-Murley score,Quick Disabilities of the Arm,Shoulder and Hand(QuickDASH)score,and complications of the shoulder joint at the last follow-up were compared between the two groups.RESULTS AND CONCLUSION:(1)All patients were followed-up for average(15.56±4.05)months,and no difference was observed in hospital stay and fracture healing time between the two groups(P＞0.05).The minimal invasive plate osteosynthesis group had shorter operation time compared to the intramedullary nail group(P＜0.05).The intramedullary nail group had less intraoperative blood loss between the two groups of patients(P＜0.05).(2)In the intramedullary nail group,at 1 and 3 months after operation,the visual analog scale score was significantly lower than the minimal invasive plate osteosynthesis group(P＜0.05).No difference was observed in the visual analog scale in long-term follow-up,shoulder joint function,Constant-Murley score,Quick Disabilities of the Arm,Shoulder and Hand(QuickDASH)score at the last follow-up between the two groups(P＞0.05).(3)No complications such as nonunion or wound infection occurred in either group.Two cases of radial nerve palsy occurred in minimal invasive plate osteosynthesis group,both of which recovered within 3 months.The intramedullary nail group had 1 case of rotator cuff injury.There was no significant difference in the rate of complications between the two groups(P＞0.05).(4)To conclude,minimal invasive plate osteosynthesis and intramedullary nail can achieve good clinical efficacy in the treatment of AO12-C type middle-proximal humeral fractures,effectively improving shoulder joint function in patients.However,minimal invasive plate osteosynthesis exhibits obvious advantages in shorter surgical time with the assistance of 3D printing,which is a valuable,effective,and safe method for treating AO12-C type middle-proximal humeral fractures.

Objective:To explore the causal relationship between human immune cells and hypertrophic scar (HS) using two-sample bidirectional Mendelian randomization (MR) method.Methods:This study was based on two-sample MR method, and the datasets of 731 immune cells and HS were obtained from the genome-wide association study (GWAS) catalog database and Finngen database, respectively. A significance threshold was established to discern single nucleotide polymorphism (SNP) significantly correlated with immune cells or HS, thereby eliminating the impact of weak instrumental variable bias. The inverse variance weighted (IVW) method (meanwhile, the Benjamini-Hochberg (BH) procedure of false discovery rate (FDR) to adjust P values) was used for preliminary detection of the causal relationship between immune cells and HS and screen the immune cells that had a significant causal relationship with HS. Further, the causal relationship between the selected immune cells and HS was detected through five two-sample MR methods: IVW method, weighted median method, simple mode method, weighted mode method, and MR-Egger method, and the scatter plot was drawn. SNPs conformed to the hypothesis were subjected to Cochran Q test for heterogeneity assessment, MR-Egger regression coupled with MR-PRESSO to eliminate horizontal pleiotropic effects, and a leave-one-out analysis was also conducted to determine if significant results were driven by individual SNP. Finally, the IVW method contained in the two-sample MR analysis was utilized to inversely examine the causal relationship between HS and immune cells. Results:The number of SNPs in 731 immune cells reaching the significance threshold varied from 7 to 1 786, while in HS, 119 SNPs met the significance threshold, with the F values of all SNPs being greater than 10, suggesting a low likelihood of bias from weak instrumental variables. The IVW method revealed that 60 types of immune cells potentially had a causal relationship with HS (with all P values <0.05), and after adjustment using the BH method, only CD45RA and CD39 positive regulatory T cell (Treg) maintained a potentially strong causal relationship with HS ( PFDR<0.05). The IVW method (with odds ratio of 1.16 and 95% confidence interval of 1.08-1.24, P<0.05, PFDR<0.05), weighted median method (with odds ratio of 1.16 and 95% confidence interval of 1.05-1.28, P<0.05), weighted mode method (with odds ratio of 1.14 and 95% confidence interval of 1.02-1.27, P<0.05), and MR-Egger method (with odds ratio of 1.18 and 95% confidence interval of 1.07-1.30, P<0.05) of scatter plot all suggested a causal relationship between the 14 SNPs of CD45RA and CD39 positive Treg and risk of HS, only simple mode method of scatter plot suggested a not obvious relationship between the 14 SNPs of CD45RA and CD39 positive Treg and risk of HS ( P>0.05). Cochran Q test indicated no heterogeneity in the causal relationship between CD45RA on CD39 positive Treg and HS ( P>0.05). MR-Egger regression and MR-PRESSO analyses showed that there was no horizontal pleiotropy in the significant causal relationship between CD45RA and CD39 positive Treg and HS ( P>0.05). Leave-one-out analysis confirmed that the significant causal relationship between CD45RA and CD39 positive Treg and HS remained stable after sequentially removing individual SNP. Reverse two-sample MR analysis showed that HS had no potential causal relationship with any of the 731 types of immune cells ( P>0.05). Conclusions:From the perspective of genetics, it is revealed that immune cells CD45RA and CD39 positive Treg may increase the risk of HS.

The incidence of osteoporotic thoracolumbar vertebral fracture (OTLVF) in the elderly is gradually increasing. The kyphotic deformity caused by various factors has become an important characteristic of OTLVF and has received increasing attention. Its clinical manifestations include pain, delayed nerve damage, sagittal imbalance, etc. Currently, the definition and diagnosis of OTLVF with kyphotic deformity in the elderly are still unclear. Although there are many treatment options, they are controversial. Existing guidelines or consensuses pay little attention to this type of fracture with kyphotic deformity. To this end, the Lumbar Education Working Group of the Spine Branch of the Chinese Medicine Education Association and Editorial Committee of Chinese Journal of Trauma organized the experts in the relevant fields to jointly develop Clinical guidelines for the diagnosis and treatment of osteoporotic thoracolumbar vertebral fractures with kyphotic deformity in the elderly ( version 2024), based on evidence-based medical advancements and the principles of scientificity, practicality, and advanced nature, which provided 18 recommendations to standardize the clinical diagnosis and treatment.

Objective:To investigate the correlation between soluble growth stimulating gene protein 2 (sST2) and the severity of traumatic brain injury (TBI) and its value in the diagnosis of traumatic brain injury.Methods:The clinical data of 110 patients with traumatic brain injury who were treated in The First Affiliated Hospital of University of Science and Technology of China (Anhui Province Hospital) from July 2022 to December 2022 were retrospectively analyzed. These 110 patients were included in the observation group. An additional 62 patients without traumatic brain injury who concurrently received treatment in the same hospital were included in the control group. In the observation group, patients were divided into a severe group [Glasgow Coma Scale (GCS) score 3-8 points), a moderate group (GCS score 9-12 points), and a mild group (GCS score 13-15 points) according to the GCS score. Serum sST2 levels were measured using enzyme-linked immunosorbent assay (ELISA) within 24 hours after injury in each group. Serum sST2 levels were compared between the observation group and the control group. Serum sST2 levels were compared among patients with severe, moderate, and mild TBI in the observation group to analyze the correlation between serum sST2 levels and the GCS score. The efficacy of serum sST2 levels in the diagnosis of TBI was evaluated using the receiver operating characteristic curve (ROC curve).Results:Serum sST2 levels in the observation group were 96.25 (48.05, 200.00) μg/L, which were significantly higher than 25.45 (19.78, 40.46) μg/L in the control group ( Z = -8.19, P < 0.05). Serum sST2 levels in pastients with severe TBI were slightly, but not significantly, higher than those in patients with moderate TBI ( P > 0.05), and serum sST2 levels in patients with severe and moderate TBI were significantly higher than those in patients with mild TBI ( Z = -5.20, Z = -4.40, both P < 0.05). There was a significant difference in sST2 levels among patients with mild, moderate and severe TBI ( H = 36.88, P < 0.05). In the observation group, serum sST2 levels within 24 hours after surgery were significantly negatively correlated with GCS score within 24 hours after admission ( rs = -0.561, 95% CI: -0.680~-0.413, P < 0.001). As serum sST2 levels increased, GCS scores showed a decreasing trend. Serum sST2 levels can be used as a prognostic indicator for TBI. Serum sST2 levels within 24 hours after injury can serve as a risk factor for TBI ( β = 0.042, OR = 1.043, 95% CI: 1.026-1.061, P < 0.001). The serum sST2 levels within 24 hours after injury have good diagnostic efficacy for TBI (area under the curve = 87.5%, 95% CI: 0.825-0.926, P < 0.001). Conclusion:The measurement of serum sST2 levels has a high value in the evaluation of the severity of TBI and prognosis, which is crucial for developing personalized treatment strategies for TBI.

Objective:To explore the therapeutic characteristics of population with gout achieving treat-to-target (T2T) indicators through real-world research and evaluate their safety.Methods:A total of 3 287 patients diagnosed with gout by rheumatologists in 21 first-class tertiary hospitals in 10 provinces, municipalities, and autonomous regions in China from January 2015 to December 2021 were included in this polycentric cross-sectional study. The database included patients′ general information, disease characteristics, and clinical application of traditional Chinese and Western medicine treatment measures. SPSS and Excel software were used for data analysis. Frequency analysis, cluster analysis, and factor analysis were used to summarize the characteristics and rules of treatment measures for patients with gout who achieved the target after treatment. The occurrence of adverse events (AE) was recorded during treatment.Results:After treatment, 691 visits (7%) achieved the serum urate (SUA) target, and the most frequent use of urate-lowering therapy (ULT) was febuxostat, followed by benzbromarone. The most common treatment options were following: GroupⅠ: traditional Chinese medicine (TCM) decoction-TCM external treatment-physical exercise-proprietary Chinese medicine; GroupⅡ: ferulic acid-nonsteroidal anti-inflammatory drugs (NSAIDs); Group Ⅲ: allopurinol-sodium bicarbonate-benzbromarone; Group Ⅳ: glucocorticoid-colchicine; Group Ⅴ: febuxostat. A total of 5 898 visits (60%) chieved manifestations of joint pain VAS scores target, and the most frequently used drug to control joint symptoms was NSAIDs. The frequency of use of drugs to control joint symptoms were 2 118 times (usage rate reached 35.9%), while the frequency of ULT were 2 504 times (usage rate reached 42.5%), which was higher than the joint symptom control drug. The most common treatment options were following: Group Ⅰ: proprietary Chinese medicine-TCM decoction-TCM external treatment-physical exercise; Group Ⅱ: NSAIDs-colchicine hormones; Group Ⅲ: allopurinol, Group Ⅳ: benzbromarone; Group Ⅴ: febuxostat. A total of 59 adverse events occurred during treatment.Conclusion:The proportions of gout patients who reach target serum urate level & good control of joint symptoms are both very low, and ULT and anti-inflammatory prescription patterns are very different from international guidelines, so it is necessary to strengthen the standardized management of gout patients. At the same time, life intervention measures account for a certain proportion of the treatment plans for the T2T population, and further exploration is needed.

Pellionia scabra belongs to the genus Pellionia in the family of Urticaceae, and is a high-quality wild vegetables with high nutritional value. In this study, high-throughput techniques were used to sequence, assemble and annotate the chloroplast genome. We also analyzed its structure, and construct the phylogenetic trees from the P. scabra to further study the chloroplast genome characteristics. The results showed that the chloroplast genome size was 153 220 bp, and the GC content was 36.4%, which belonged to the typical tetrad structure in P. scabra. The chloroplast genome encodes 130 genes, including 85 protein-coding genes, 37 tRNA genes, and 8 rRNA genes in P. scabra. Among them, 15 genes contained 1 intron, 2 genes contained 2 introns, and rps12 had trans-splicing, respectively. In P. scabra, chloroplast genomes could be divided into four categories, including 43 photosynthesis, 64 self-replication, other 7 coding proteins, and 4 unknown functions. A total of 51 073 codons were detected in the chloroplast genome, among which the codon encoding leucine (Leu) accounted for the largest proportion, and the codon preferred to use A and U bases. There were 72 simple sequence repeats (SSRs) in the chloroplast genome of P. scabra, containing 58 single nucleotides, 12 dinucleotides, 1 trinucleotide, and 1 tetranucleotide. The ycf1 gene expansion was present at the IRb/SSC boundary. The phylogenetic trees showed that P. scabra (OL800583) was most closely related to Elatostema stewardii (MZ292972), Elatostema dissectum (MK227819) and Elatostema laevissimum var. laevissimum (MN189961). Taken together, our results provide worthwhile information for understanding the identification, genetic evolution, and genomics research of P. scabra species.
Phylogeny ; Genome, Chloroplast/genetics* ; Genomics ; Chloroplasts/genetics* ; Codon ; Urticaceae/genetics*

Alginate is a group of polyuronic saccharides that are widely used in pharmaceutical and food industry due to its unique physicochemical properties and beneficial health effects. However, the low water solubility and high viscosity of alginate hampered its application. Alginate oligosaccharide (AOS) is a decomposition product of alginate and has received increasing attention due to its low molecular weight, high water solubility, safety, and non-toxicity. The wide-ranging biological functions of AOS are closely related to its structural diversity. AOS with distinct structures and biological functions can be obtained by different methods of preparation. This review summarized the biological functions of AOS reported to date, including anti-tumor, immunomodulatory, anti-inflammatory, antioxidant, prebiotic, and anti-diabetes. The preparation of AOS, as well as the relationship between the structure and biological functions of AOS were discussed, with the aim to provide a reference for further development and application of AOS.
Alginates ; Anti-Inflammatory Agents ; Antioxidants ; Molecular Weight ; Oligosaccharides