Objective To prepare tubeimoside Ⅲ nanoemulsion(TBMⅢ-NE)and evaluate its adjuvant effect in vaccines.Methods TBMⅢ-NE was prepared using low-energy emulsification.Dynamic light scattering was used to characterize the particle size and polydispersity index of the obtained TBMⅢ-NE,and transmission electron microscopy(TEM)was employed to observe the morphology.CCK-8 assay was utilized to determine the cytotoxicity of TBMⅢ-NE on bone marrow-derived dendritic cells(BMDCs).The in vitro safety of TBMⅢ-NE was evaluated using a hemolysis assay.The ability of TBMⅢ-NE to promote the phagocytosis of antigens by DC2.4 cells was observed using confocal laser microscopy.After co-incubation of TBMⅢ-NE with BMDCs,the expression levels of CD40,CD86,MHC-Ⅰ,and CCR7 on the surface of BMDCs were detected using flow cytometry,and the levels of cytokines in the supernatant of BMDCs were measured using enzyme-linked immunosorbent assay(ELISA).After female BALB/c mice were immunized with the SARS-CoV-2 antigen RBD in combination with TBMⅢ-NE,ELISA was conducted to determine the serum levels of specific IgG,IgG2a,and IgG1 antibodies.The number of specific IFN-γ-secreting cells in mouse splenocytes was detected using enzyme-linked immunospot(ELISpot)assay.Results The prepared blank nanoemulsion(BNE)and TBMⅢ-NE were in a particle size of 25.46 and 25.89 nm,and a polydispersity index of 0.214 and 0.125,respectively.TEM displayed that TBMⅢ-NE was in uniform sphere and well dispersed.When the TBMⅢ-NE adjuvant was diluted by 400-fold,the survival rate of BMDCs was approximately 86%.Compared with free TBMⅢ,the hemolytic toxicity of TBMⅢ-NE was significantly reduced(P<0.01).TBMⅢ-NE promoted the phagocytosis of antigens by DC2.4 cells and significantly increased the expression of CCR7 on the surface of BMDCs(P<0.05),indicating its potential to promote more dendritic cells to effectively migrate to lymph nodes.TBMⅢ-NE also promoted the expression of IL-6 and IL-1β in the supernatant of BMDCs(P<0.05).When combined with RBD,TBMⅢ-NE significantly increased the levels of specific IgG,IgG2a,and IgG1 antibodies in mouse serum(P<0.01)and promoted the secretion of specific IFN-γ in splenocytes(P<0.01),indicating that TBM Ⅲ-NE could enhance specific cellular immune responses.Conclusion A stable and highly effective TBMⅢ-NE that can induce humoral and cellular immune responses is successfully prepared.

ObjectiveTo explore the central neuroregulation mechanism of heat-sensitive moxibustion for knee osteoarthritis on pain relief. MethodsThirty patients who did not have experience of Deqi （得气） during heat-sensitive moxibustion treatment were assigned to the "non-Deqi group"， while another 30 patients who had experience of Deqi were assigned to the "Deqi group". Both groups received moxibustion at the left Heding （EX-LE2） acupoint. In the Deqi group， after the patients experienced sensation of Deqi at the acupoint， moxibustion was applied at approximately 3 cm from the skin for 10 minutes； in the non-Deqi group， moxibustion was also applied at approximately 3 cm from the skin for 10 minutes. Both groups received treatment once daily for 10 consecutive days. Knee joint pain was assessed before and after treatment using the visual analog scale （VAS）. Resting-state functional magnetic resonance imaging （rs-fMRI） scans were performed on all participants before the first treatment session and after the final session on the 10th day. The fractional amplitude of low-frequency fluctuations （fALFF） maps before and after treatment were processed using the SPM12 module by MATLAB. ResultsAfter treatment， VAS scores in both groups were significantly lower than before treatment （P＜0.05 or P＜0.01）， with the Deqi group showing significantly lower VAS scores than the non-Deqi group （P＜0.01）. Compared to before treatment， the Deqi group exhibited significant activation in the prefrontal cortex （t = 6.28）， white matter （t = 6.36）， and left temporal lobe （t = 9.33）， while significant inhibition was observed in the occipital lobe （t = -9.86） and right cerebrum （t = -4.54， P＜0.01）； in the non-Deqi group， significant changes after treatment were observed in the left occipital lobe （t = -6.42）， left medial frontal gyrus （t = -4.35）， left middle frontal gyrus （t = -4.74）， right superior frontal gyrus （t = -4.82）， right superior temporal gyrus （t = -6.61）， and right cerebellar posterior lobe （t = -8.64）， all of which were in inhibited states （P＜0.01）. Compared to the non-Deqi group， the Deqi group exhibited significant activation after treatment in the external nucleus （t = 5.77）， white matter （t = 3.58）， right cerebrum （t = 5.84）， left cerebellum （t = 5.35）， and left cerebrum （t = 4.32）， while significant inhibition was observed in the prefrontal cortex （t = -4.16）， occipital lobe （t = -4.87）， and precentral gyrus （t = -4.46， P＜0.01）. ConclusionsHeat-sensitive moxibustion provides better analgesic effects for knee osteoarthritis under state of Deqi. Its central neuroregulation mechanism may be related to the involvement of the frontal lobe， temporal lobe， occipital lobe， external nucleus， white matter， right cerebrum， left cerebellum， left cerebrum， and precentral gyrus in modulating pain signals.

OBJECTIVES: This study aims to evaluate the short- to medium-term clinical efficacy of demineralized dentin matrix (DDM) particles applied during the immediate implantation of alveolar bone defects in the posterior region. METHODS: A total of 76 patients with 110 simple taper retentive implants were included in the conducted study and divided into Groups A and B in accordance with the bone grafting materials. Cone beam computed tomography and panoramic radiographs were taken immediately after implant surgery, immediate crown repair, and final follow-up time. The average follow-up time for Groups A and B was recorded. The primary observed clinical indicators were overall survival rate of the implant, bone resorption of the mesial and distal margins of the implant, buccal bone width resorption at the platform level and 1 mm below the platform, and bone height of the implant. Implant complication was a secondary observed clinical indicator. RESULTS: During the 1-to-5-year follow-up observation period, the mean follow-up of Group A was 38.2 months while that of Group B was 39.9 months. In Group A, two implants failed, one of which fractured, and implant overall survival rate was 96.4%. Four implants failed in Group B due to peri-implantitis, and implant overall survival rate was 92.6%. No statistically significant difference in implant overall survival rate was found between the two groups (P>0.05). In Group A, the average bone resorption in the mesial and distal margins of the implants was (1.011±2.047) mm and (0.841±2.183) mm, respectively. In Group B, the average bone resorption of the mesial and distal margins of the implants was (1.546±1.778) mm and (1.431±1.909) mm, respectively. No statistically significant difference was noted between the two groups (P>0.05). In Group A, buccal bone width resorption at the platform level and 1 mm below the platform of the implant was (0.782±2.084) mm and (0.681±2.307) mm, respectively. In Group B, buccal bone width resorption at the platform level and 1 mm below the platform of implant was (1.071±1.474) mm and (0.949±1.909) mm, respectively. No statistically significant difference was found between the two groups (P>0.05). In Group A, the buccal bone height of resorption of the implant was (1.044±2.214) mm. In Group B, the buccal bone height of resorption of the implant was (1.075±1.456) mm. No statistically significant difference in bone height was observed between the two groups (P>0.05). CONCLUSIONS During the 1-to-5-year follow-up observation period, DDM particles can effectively increase the height and width of alveolar bone, and they can achieve the same effect of maintaining alveolar bone contour and bone augmentation compared with deproteinized inorganic calf bone. DDM particles can be used as a potential new bone grafting material for the treatment of bone defects in clinical practice.
Humans ; Follow-Up Studies ; Dentin ; Cone-Beam Computed Tomography ; Dental Implants ; Male ; Female ; Adult ; Alveolar Bone Loss/surgery* ; Middle Aged ; Bone Transplantation ; Radiography, Panoramic ; Dental Implantation, Endosseous/methods* ; Immediate Dental Implant Loading

OBJECTIVES: To explore the related risk factors of early failure of simple taper retentive implants, and to provide theoretical guidance for clinical work. METHODS: Collect cases of patients who visited the Department of Stomatology of the Fourth Affiliated Hospital of Nanchang University from January 2021 to June 2024, received simple taper retentive implants, and had complete medical records. Taking the implants as the unit, analyze the influence of patient-related factors (gender, age, smoking history, hypertension history, diabetes history), implant-related factors (implant length, implant diameter, implant surface treatment), and surgical-related factors (implant site, implant timing, simultaneous maxillary sinus floor elevation, simultaneous bone augmentation) on the early failure of implants. Univariate analysis and multivariate analysis were adopted to explore the potential risk factors for early failure of simple taper retentive implants. RESULTS: A total of 3,533 simple taper retentive from 1,681 patients were included during the study period. Among them, 53 implants from 49 patients experienced early failure, with an early failure rate of 2.9% at the patient le-vel and 1.5% at the implant level. Multivariate analysis revealed that smoking (OR=2.148, P=0.021), the anterior mandibular region (OR=3.669, P=0.006), and the posterior maxillary region (OR=2.191, P=0.033) were risk factors for early failure of simple taper retentive implants. In the univariate analysis, simultaneous maxillary sinus floor elevation had a higher risk of early failure, but this effects was no longer significant in the multivariate analysis (P>0.05). CONCLUSIONS Smoking, the anterior mandibular region, and the posterior maxillary region are risk factors for the early failure of simple taper retentive implants, and could be comprehensively considered in the preoperative treatment plan.
Humans ; Risk Factors ; Male ; Female ; Middle Aged ; Dental Implants ; Adult ; Smoking/adverse effects* ; Dental Restoration Failure ; Aged

BACKGROUND:Stem cell mesenchyme within reactive softtissues has the potential to promote tissue regeneration.Demineralized dentin matrix,which has good biocompatibility,can be used as a scaffold material for the site preservation surgery to promote the attachment,proliferation,and differentiation of osteoblasts.OBJECTIVE:To evaluate the changes in alveolar bone height and width after 6 months of site preservation with demineralized dentin matrix after 1 month of extraction of affected teeth with preservation of reactive softtissues.METHODS:A total of 38 patients with 62 extraction sites were included.One month after the extraction of the affected teeth with preservation of reactive soft tissues,demineralized dentin matrix was used to perform site-preservation surgery.Cone-beam CT was taken preoperatively,immediately postoperatively,and 6 months postoperatively to measure the proximal-medial bone height,central bone height,distal-medial bone height,buccal bone height,lingual bone height,and alveolar bone height,and alveolar bone width.Extraction defects were categorized as one-,two-,three-,or four-wall defects based on the number of alveolar fossa bone walls remaining after tooth extraction.Changes in bone volume were compared preoperatively,immediately postoperatively,and 6 months postoperatively.RESULTS AND CONCLUSION:No wound infection occurred at any site during bone healing.Compared with preoperative data,there was a significant increase in alveolar bone height and bone immediately postoperatively(P<0.05);there was also an increase in alveolar bone height but no change in alveolar bone width 6 months postoperatively(P>0.05).Compared with the immediate postoperative period,alveolar bone width was increased by(1.253±2.896)mm 6 months postoperatively,but there was no change in alveolar bone height(P>0.05).The bone height of the four bone defect types was significantly increased immediately and 6 months postoperatively(P<0.05),and no changes in the bone width were observed(P>0.05).Compared with the preoperative data,there was the least increase in proximal-medial bone volume in one-wall bone defects at 6 months postoperatively(P<0.05)and the most increase in proximal-medial bone volume in two-wall bone defects(P<0.05).These findings indicate that demineralized dentin matrix applied to site preservation can effectively prevent and slow down alveolar bone resorption after tooth extraction,and can rebuild the alveolar bone contour where resorption has occurred to a certain extent;preservation of reactive tissues applied to demineralized dentin matrix site preservation after tooth extraction can achieve wound closure with good clinical efficacy;demineralized dentin matrix applied to the alveolar socket site preservation with one-,two-,three-,and four-wall defects shares similar effects.However,demineralized dentin matrix is more effective for site preservation when applied to extraction sockets with intact bone walls.

OBJECTIVE To investigate and analyze the current situation and problems of the advanced personnel en-gaging in the hospital-acquired infection control during their training period and explore the existing countermeas-ures and future development.METHODS The literatures regarding to the advanced study in China were retrieved from databases,the subjects of the literatures covered infection control-related advanced study practice,discipline construction,position competence,talent cultivation,scientific research innovation,professional title evaluation,laws,regulations and development plans.From Aug.2024 to Nov.2024,a questionnaire survey and face-to-face interviews were conducted among 36 advanced study personnel from 9 provinces of China who engaged in hos-pital-acquired infection control in the First Medical Center of Chinese PLA General Hospital.Eventually,36 ques-tionnaires were retrieved,all of which were valid with a questionnaire recovery rate of 100.00％.RESULTS Among the 36 advanced study personnel of hospital-acquired infection control,58.33％were medium-grade professional ti-tle;preventive medicine(41.67％),clinical medicine(25.00％)and nursing(16.67％)ranked the top 3 majors.The personnel engaged in the infection control for more than 6 years,and the duration of the advanced study was generally 3 or 6 months.In reality,the personnel faced the choices in terms of the purposes of further education,learning approaches and learning contents.The advanced study personnel also encountered the problems of challenges from promotion,improvement of position competency,integration with clinical training,supervision and practice,as well as physiological,psychological and family pressure.CONCLUSION Aiming at the problems that the advanced study personnel are generally concerned about,such as how to scientifically and effectively carry out hospital-acquired infection control advanced study and preset and solve the problems that may encounter,it is necessary to formulate targeted training programmes so as to provide bases and enlightenment for establishment of a long-term mechanism for advanced study of infection control in China.

BACKGROUND:Stem cell mesenchyme within reactive softtissues has the potential to promote tissue regeneration.Demineralized dentin matrix,which has good biocompatibility,can be used as a scaffold material for the site preservation surgery to promote the attachment,proliferation,and differentiation of osteoblasts.OBJECTIVE:To evaluate the changes in alveolar bone height and width after 6 months of site preservation with demineralized dentin matrix after 1 month of extraction of affected teeth with preservation of reactive softtissues.METHODS:A total of 38 patients with 62 extraction sites were included.One month after the extraction of the affected teeth with preservation of reactive soft tissues,demineralized dentin matrix was used to perform site-preservation surgery.Cone-beam CT was taken preoperatively,immediately postoperatively,and 6 months postoperatively to measure the proximal-medial bone height,central bone height,distal-medial bone height,buccal bone height,lingual bone height,and alveolar bone height,and alveolar bone width.Extraction defects were categorized as one-,two-,three-,or four-wall defects based on the number of alveolar fossa bone walls remaining after tooth extraction.Changes in bone volume were compared preoperatively,immediately postoperatively,and 6 months postoperatively.RESULTS AND CONCLUSION:No wound infection occurred at any site during bone healing.Compared with preoperative data,there was a significant increase in alveolar bone height and bone immediately postoperatively(P<0.05);there was also an increase in alveolar bone height but no change in alveolar bone width 6 months postoperatively(P>0.05).Compared with the immediate postoperative period,alveolar bone width was increased by(1.253±2.896)mm 6 months postoperatively,but there was no change in alveolar bone height(P>0.05).The bone height of the four bone defect types was significantly increased immediately and 6 months postoperatively(P<0.05),and no changes in the bone width were observed(P>0.05).Compared with the preoperative data,there was the least increase in proximal-medial bone volume in one-wall bone defects at 6 months postoperatively(P<0.05)and the most increase in proximal-medial bone volume in two-wall bone defects(P<0.05).These findings indicate that demineralized dentin matrix applied to site preservation can effectively prevent and slow down alveolar bone resorption after tooth extraction,and can rebuild the alveolar bone contour where resorption has occurred to a certain extent;preservation of reactive tissues applied to demineralized dentin matrix site preservation after tooth extraction can achieve wound closure with good clinical efficacy;demineralized dentin matrix applied to the alveolar socket site preservation with one-,two-,three-,and four-wall defects shares similar effects.However,demineralized dentin matrix is more effective for site preservation when applied to extraction sockets with intact bone walls.

OBJECTIVE To investigate and analyze the current situation and problems of the advanced personnel en-gaging in the hospital-acquired infection control during their training period and explore the existing countermeas-ures and future development.METHODS The literatures regarding to the advanced study in China were retrieved from databases,the subjects of the literatures covered infection control-related advanced study practice,discipline construction,position competence,talent cultivation,scientific research innovation,professional title evaluation,laws,regulations and development plans.From Aug.2024 to Nov.2024,a questionnaire survey and face-to-face interviews were conducted among 36 advanced study personnel from 9 provinces of China who engaged in hos-pital-acquired infection control in the First Medical Center of Chinese PLA General Hospital.Eventually,36 ques-tionnaires were retrieved,all of which were valid with a questionnaire recovery rate of 100.00％.RESULTS Among the 36 advanced study personnel of hospital-acquired infection control,58.33％were medium-grade professional ti-tle;preventive medicine(41.67％),clinical medicine(25.00％)and nursing(16.67％)ranked the top 3 majors.The personnel engaged in the infection control for more than 6 years,and the duration of the advanced study was generally 3 or 6 months.In reality,the personnel faced the choices in terms of the purposes of further education,learning approaches and learning contents.The advanced study personnel also encountered the problems of challenges from promotion,improvement of position competency,integration with clinical training,supervision and practice,as well as physiological,psychological and family pressure.CONCLUSION Aiming at the problems that the advanced study personnel are generally concerned about,such as how to scientifically and effectively carry out hospital-acquired infection control advanced study and preset and solve the problems that may encounter,it is necessary to formulate targeted training programmes so as to provide bases and enlightenment for establishment of a long-term mechanism for advanced study of infection control in China.

Objective To investigate the differences in clinical and radiographic features between severe influenza A H1N1 and H3N2 in children.Methods The clinical and radiographic data of children diagnosed with severe influenza A H1N1 and H3N2 were analyzed retrospectively.According to the pathogen subtypes,they were divided into H1N1 group(34 cases)and H3N2 group(23 cases).Differences in clinical data,laboratory results,treatment,hospitalization time,outcome,and radiographic features between the two groups were analyzed.The t-test was used for the comparison of normally distributed measurement data between the groups,and Mann-Whitney U test was used for the comparison of non-normally distributed measurement data between the groups.Chi-square test or Fisher's exact probability method was used for the analysis of counting data,depending on the situation.Results There were differences in the season of onset,clinical and radiographic features between the two groups.H1N1 subtype mostly occurred in win-ter,and mainly manifested as respiratory symptoms(wheezing/shortness of breath)and respiratory complications(severe pneumonia).H3N2 subtype was mainly observed in summer,and more likely to involve the central nervous system(CNS),presenting with neuro-logical symptoms(convulsions),abnormal electroencephalogram,and concurrent influenza associated encephalopathy(IAE).Conclusion There are significant differences in epidemiology,clinical and radiographic features between severe influenza A H1N1 and H3N2.H3N2 has a higher probability of concurrent IAE and should be highly vigilant in clinical practice.

Objective This test aimed to investigate the factors affecting the locking force between the implant and abutment and the amount of abutment subsidence in pure Morse taper connection implant systems.Methods With ref-erence to the Bicon implant abutment connection design,different types of implant specimens and their corresponding types of abutments were fabricated.The implant-abutment locking taper was uniformly 1.5°.The locking depths were 1.0,2.0,and 3.0 mm.The diameters of the locking column were 2.5,3.0,and 3.5 mm.The thicknesses of the outer wall of the implant were 0.15 and 0.30 mm.The loading forces of the testing machine were 200,300,and 400 N.At least 10 specimens of each group of implant-abutment were used.All specimens were loaded in the same manner using a univer-sal testing machine(finger pressure + specified loading force,five times).The total height of the implant-abut-ment was measured before finger pressure,after finger pressure,and after the testing machine was loaded for five times to calculate the amount of sinking of the abutment.Finally,the implant and abutment were pulled apart using the universal testing machine,and the subluxation force was observed and recorded.Results The test loading force,locking depth,and locking post diameter had an effect on the implant-abutment locking force and abutment subsidence.The implant-abutment locking force increased with the increase in the test loading force,locking depth,and locking post diameter(R=0.963,0.607,and 0.372,respectively),with the test loading force having the most significant effect.Abut-ment subsidence increased with the increase in test loading force(R=0.645)and decreased with the increase in locking depth and locking post diameter(R=-0.807 and-0.280,respectively),with locking depth having the most significant ef-fect on abutment subsidence.No significant correlation was found between the thickness of the outer wall of the implant and the change in the magnitude of the implant-abutment locking force.However,an increase in the thickness of the out-er wall of the implant decreased the amount of abutment subsidence,which was inversely correlated.Conclusion The locking force of the implant-abutment can be increased by adjusting the design of the pure Morse taper connection im-plant-abutment connection,increasing the locking depth and locking post diameter,and increasing the amount and num-ber of times the abutment is loaded during seating.Problems,such as loosening or detachment of the abutment,can be re-duced.The recommended abutment to be loaded should be no less than five times during seating to prevent the abutment from sinking and causing changes in the occlusal relationship in the later stages.Preliminary occlusal adjustments should only be conducted in the early stages of the use of temporary restorations,and final restorations and occlusal adjustments are recommended to be performed after using the abutment for a period of time.