Objective To investigate the regulatory effect of lipocalin 2(LCN2)on epidermal growth factor receptor(EGFR)phosphorylation and its impact on inflammatory damage in human fallopian tube epithelial cells.Methods Human fallopian tube epithelial cells were isolated and a lipopolysaccharide(LPS)intervention was applied to establish an in vitro cell model.The cells were randomly assigned into the following groups:a blank control group(Control),a model group(Model),experimental groups(Model+si-LCN2 or Model+oe-LCN2),and negative control groups(Model+si-NC or Model+oe-NC).Changes in cell viability,apoptosis rates,inflam-matory levels,as well as the expression of EGFR mRNA,LCN2,EGFR,p-EGFR,and the ratio of p-EGFR/EGFR proteins were evaluated.Results Compared to the Model group,the Model+si-LCN2 group exhibited enhanced cell viability,a reduced apoptosis rate,and decreased expression of inflammatory factors(P＜0.05).Immunopre-cipitation analysis confirmed a direct interaction between LCN2 and EGFR.In comparison with the Model group,the Model+oe-LCN2 group demonstrated elevated levels of p-EGFR and the p-EGFR/EGFR ratio(P＜0.05),while no significant change was observed in total EGFR expression(P＞0.05).Conclusion Inhibition of LCN2-mediated EGFR phosphorylation enhances cell viability,reduces apoptosis,and mitigates inflammatory responses,thereby ameliorating LPS-induced inflammatory injury in human fallopian tube epithelial cells.

Evading host immunity killing is a critical step for virus survival. Inhibiting viral immune escape is crucial for the treatment of viral diseases. Serine/threonine kinase 39 (STK39) was reported to play an essential role in ion homeostasis. However, its potential role and mechanism in viral infection remain unknown. In this study, we found that viral infection promoted STK39 expression. Consequently, overexpressed STK39 inhibited the phosphorylation of interferon regulatory factor 3 (IRF3) and the production of type I interferon, which led to viral replication and immune escape. Genetic ablation or pharmacological inhibition of STK39 significantly protected mice from viral infection. Mechanistically, mass spectrometry and immunoprecipitation assays identified that STK39 interacted with PPP2R1A (a scaffold subunit of protein phosphatase 2A (PP2A)) in a kinase activity-dependent manner. This interaction inhibited DDB1 and CUL4 associated factor 1 (DCAF1)-mediated PPP2R1A degradation, maintained the stabilization and phosphatase activity of PP2A, which, in turn, suppressed the phosphorylation of IRF3, decreased the production of type I interferon, and then strengthened viral replication. Thus, our study provides a novel theoretical basis for viral immune escape, and STK39 may be a potential therapeutic target for viral infectious diseases.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveTo investigate the processing technology of calcined Haematitum based on the concept of quality by design（QbD） and to assess its health risk. MethodsTaking whole iron content， Fe²⁺ dissolution content and looseness as critical quality attributes（CQAs）， and calcination temperature， calcination time， spreading thickness and particle size as critical process parameters（CPPs） determined by the failure mode and effect analysis（FMEA）， the processing technology of calcined Haematitum was optimized by orthogonal test combined with analytic hierarchy process-criteria importance through intercriteria correlation（AHP-CRITIC） hybrid weighting method. The contents of heavy metals and harmful elements were determined by inductively coupled plasma mass spectrometry， and the health risk assessment was carried out by daily exposure（EXP）， target hazard quotient（THQ） and lifetime cancer risk（LCR）， and the theoretical value of the maximum limit was deduced. ResultsThe optimal processing technology for calcined Haematitum was calcination at 650 ℃， calcination time of 1 h， particle size of 0.2-0.5 cm， spreading thickness of 1 cm， and vinegar quenching for 1 time［Haematitum-vinegar（10：3）］. The contents of 5 heavy metals and harmful elements in 13 batches of calcined Haematitum were all decreased with reductions of up to 5-fold. The cumulative THQ of 2 batches of samples was>1， while the cumulative THQ of all batches of Haematitum was>1. The LCR of As in 1 batches of Haematitum was 1×10^-6-1×10^-4， and the LCR of the rest was<1×10^-6， and the LCRs of calcined Haematitum were all<1×10^-6， indicating that the carcinogenic risk of calcined Haematitum was low， but special attention should still be paid to Haematitum medicinal materials. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg were formulated as 1 014， 25， 17， 27， 7 mg·kg^-1. ConclusionThe optimized processing technology of calcined Haematitum is stable and feasible， and the contents of heavy metals and harmful elements are reduced after processing. Preliminary theoretical values of the maximum limits of Cu， As， Cd， Pb and Hg are formulated to provide a scientific basis for the formulation of standards for the limits of harmful elements in Haematitum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective:To explore the impact of the two-way referral model on compliance and prognosis in patients with heart failure.Methods:This bidirectional cohort study enrolled chronic heart failure (CHF) patients treated at Qilu Hospital of Shandong University or designated primary hospitals between March 2018 and March 2022. Patients were categorized into two groups based on referral status: two-way referral group (participating in the referral model with≥1 follow-up visit at primary hospitals) and the core hospital group (receiving treatment and follow-up exclusively at Qilu Hospital). Baseline clinical characteristics were collected and compared between groups. Patients underwent followed-up, with primary endpoints including follow-up rate, drug (β-blockers, angiotension converting enzyme inhibitor (ACEI)/angiotensin Ⅱ receptor blockers (ARB)/angiotensin receptor-neprilysin inhibitor (ARNI), sodium-glucose cotransporter 2 inhibitors and mineralocorticoid receptor antagonists) utilization rate and target dose achievement rate. Secondary endpoints encompassed changes from baseline in left ventricular ejection fraction (LVEF), left ventricular end-diastolic diameter (LVEDd), and N-terminal pro-brain natriuretic peptide (NT-proBNP), plus cardiovascular mortality and heart failure rehospitalization. Generalized linear mixed models analyzed longitudinal trends in LVEF, LVEDd, and NT-proBNP levels. Kaplan-Meier curves and Cox regression evaluated LVEF recovery rates, supplemented by subgroup analyses. Multivariate logistic regression was used to identify factors influencing target dose achievement rate for β-blockers and ACEI/ARB/ARNI therapies in CHF patients.Results:A total of 357 patients were enrolled, aged 53 (41, 63) years, including 256 males (71.7%). 157 patients were in the two-way referral group and 200 patients in the core hospital-treated group. Compared with the core hospital-treated group, the two-way referral group had lower baseline LVEF (28 (22, 34)% vs. 31 (23, 36)%, P=0.021) and systolic blood pressure (116 (104, 125) mmHg vs. 121 (109, 134) mmHg (1 mmHg=0.133 kPa), P=0.010). The 12-month follow-up rate of the two-way referral group was higher than the core hospital-treated group (73.8% vs. 56.0%, P=0.004). No significant between-group differences were observed in drug utilization rate of β-blockers, ACEI/ARB/ARNI, or sodium-glucose cotransporter 2 inhibitors during follow-up (all P>0.05), while mineralocorticoid receptor antagonists use showed a declining trend in both groups. Although the core hospital-treated group had higher target dose achievement rates for β-blockers (65.4% vs. 49.3%, P=0.042) and ACEI/ARB/ARNI (79.8% vs. 65.8%, P=0.046) than the two-way referral group, multivariate logistic regression indicated that the two-way referral model was not a negative predictor for these outcomes (all P>0.05). Both groups showed improved NT-proBNP, LVEDd, and LVEF from baseline (all P<0.001) with no significant difference in trends between groups (all P>0.05). There was no significant difference in the composite incidence (7.6% vs. 6.5%, P=0.674) and cumulative incidence (log-rank P=0.684) of cardiovascular death and heart failure rehospitalization at 12 months between two groups. Conclusion:The two-way referral model demonstrates advantages in improving medication adherence, drug utilization rates, and targetdoseachievement rates among CHF patients. This model not only promotes cardiac functional recovery but also reduces risks of cardiovascular mortality and heart failure rehospitalization, achieving comparable therapeutic and management outcomes to those observed in core hospital-treated patients.

Objective To investigate the regulatory effect of lipocalin 2(LCN2)on epidermal growth factor receptor(EGFR)phosphorylation and its impact on inflammatory damage in human fallopian tube epithelial cells.Methods Human fallopian tube epithelial cells were isolated and a lipopolysaccharide(LPS)intervention was applied to establish an in vitro cell model.The cells were randomly assigned into the following groups:a blank control group(Control),a model group(Model),experimental groups(Model+si-LCN2 or Model+oe-LCN2),and negative control groups(Model+si-NC or Model+oe-NC).Changes in cell viability,apoptosis rates,inflam-matory levels,as well as the expression of EGFR mRNA,LCN2,EGFR,p-EGFR,and the ratio of p-EGFR/EGFR proteins were evaluated.Results Compared to the Model group,the Model+si-LCN2 group exhibited enhanced cell viability,a reduced apoptosis rate,and decreased expression of inflammatory factors(P＜0.05).Immunopre-cipitation analysis confirmed a direct interaction between LCN2 and EGFR.In comparison with the Model group,the Model+oe-LCN2 group demonstrated elevated levels of p-EGFR and the p-EGFR/EGFR ratio(P＜0.05),while no significant change was observed in total EGFR expression(P＞0.05).Conclusion Inhibition of LCN2-mediated EGFR phosphorylation enhances cell viability,reduces apoptosis,and mitigates inflammatory responses,thereby ameliorating LPS-induced inflammatory injury in human fallopian tube epithelial cells.

Objective:To explore the impact of the two-way referral model on compliance and prognosis in patients with heart failure.Methods:This bidirectional cohort study enrolled chronic heart failure (CHF) patients treated at Qilu Hospital of Shandong University or designated primary hospitals between March 2018 and March 2022. Patients were categorized into two groups based on referral status: two-way referral group (participating in the referral model with≥1 follow-up visit at primary hospitals) and the core hospital group (receiving treatment and follow-up exclusively at Qilu Hospital). Baseline clinical characteristics were collected and compared between groups. Patients underwent followed-up, with primary endpoints including follow-up rate, drug (β-blockers, angiotension converting enzyme inhibitor (ACEI)/angiotensin Ⅱ receptor blockers (ARB)/angiotensin receptor-neprilysin inhibitor (ARNI), sodium-glucose cotransporter 2 inhibitors and mineralocorticoid receptor antagonists) utilization rate and target dose achievement rate. Secondary endpoints encompassed changes from baseline in left ventricular ejection fraction (LVEF), left ventricular end-diastolic diameter (LVEDd), and N-terminal pro-brain natriuretic peptide (NT-proBNP), plus cardiovascular mortality and heart failure rehospitalization. Generalized linear mixed models analyzed longitudinal trends in LVEF, LVEDd, and NT-proBNP levels. Kaplan-Meier curves and Cox regression evaluated LVEF recovery rates, supplemented by subgroup analyses. Multivariate logistic regression was used to identify factors influencing target dose achievement rate for β-blockers and ACEI/ARB/ARNI therapies in CHF patients.Results:A total of 357 patients were enrolled, aged 53 (41, 63) years, including 256 males (71.7%). 157 patients were in the two-way referral group and 200 patients in the core hospital-treated group. Compared with the core hospital-treated group, the two-way referral group had lower baseline LVEF (28 (22, 34)% vs. 31 (23, 36)%, P=0.021) and systolic blood pressure (116 (104, 125) mmHg vs. 121 (109, 134) mmHg (1 mmHg=0.133 kPa), P=0.010). The 12-month follow-up rate of the two-way referral group was higher than the core hospital-treated group (73.8% vs. 56.0%, P=0.004). No significant between-group differences were observed in drug utilization rate of β-blockers, ACEI/ARB/ARNI, or sodium-glucose cotransporter 2 inhibitors during follow-up (all P>0.05), while mineralocorticoid receptor antagonists use showed a declining trend in both groups. Although the core hospital-treated group had higher target dose achievement rates for β-blockers (65.4% vs. 49.3%, P=0.042) and ACEI/ARB/ARNI (79.8% vs. 65.8%, P=0.046) than the two-way referral group, multivariate logistic regression indicated that the two-way referral model was not a negative predictor for these outcomes (all P>0.05). Both groups showed improved NT-proBNP, LVEDd, and LVEF from baseline (all P<0.001) with no significant difference in trends between groups (all P>0.05). There was no significant difference in the composite incidence (7.6% vs. 6.5%, P=0.674) and cumulative incidence (log-rank P=0.684) of cardiovascular death and heart failure rehospitalization at 12 months between two groups. Conclusion:The two-way referral model demonstrates advantages in improving medication adherence, drug utilization rates, and targetdoseachievement rates among CHF patients. This model not only promotes cardiac functional recovery but also reduces risks of cardiovascular mortality and heart failure rehospitalization, achieving comparable therapeutic and management outcomes to those observed in core hospital-treated patients.

Objective To investigate the mechanisms of miRNA-15a and miRNA-16 in the process of reversing cisplatin resistance in ovarian cancer.Methods Human ovarian cancer cisplatin-resistant cell lines CoC1/DDP were transfected with miRNA-15a and miRNA-16 mimics and treated with cisplatin.qRT-PCR was used to detect the expression levels of miRNA-15a and miRNA-16 in normal CoC1/DDP cell group,cisplatin treated group,negative control group,miRNA-15a transfected group,miRNA-16 transfected group and overexpressed Bmi-1 plasmid.Western blot was used to detect the expression level of Bmi-1 in each group,CCK-8 and Annexin V/PI were used to detect cell survival and apoptosis,and γ-H2AX immunofluorescence was used to detect cell apoptosis.Results The CoC1/DDP ovarian cancer cell line shows low expression of miRNA-15a and miRNA-16,and high expression of Bmi-1 protein,which makes it resistant to cisplatin.When the levels of miRNA-15a and miRNA-16 are overexpressed,the Bmi-1 protein decreases(P<0.05),leading to a decrease in cell survival rate(P<0.05),a significant increase in DNA apoptosis(P<0.05),and more severe DNA damage(P<0.05).Overexpression of Bmi-1 plasmid can increase cell viability(P<0.05)and reduce the rate of cell apoptosis(P<0.05).Conclusion The Bmi-1 protein may be a target for the regulation of miRNA-15a and miRNA-16,and overexpression of miRNA-15a and miRNA-16 can increase the sensitivity of ovarian cancer cells to cisplatin by reducing the Bmi-1 protein.This provides a new idea for predicting molecular markers of cisplatin resistance in ovarian cancer and overcoming drug resistance targets in ovarian cancer.