ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo establish the multi-technique characteristic profiles of Alumen by X-ray diffraction（XRD）， Fourier-transform infrared spectroscopy（FTIR） and thermogravimetric-differential thermal analysis（TG-DTA）， and to explore the spectral characteristics for rapid identification of Alumen and its potential adulterant， Ammonium alum. MethodsA total of 27 batches of Alumen samples from 8 production regions were collected for preliminary identification based on visual characteristics. The PDF standard cards of XRD were used to differentiate Alumen from A. alum， and the XRD characteristic profiles of Alumen were established， and then the common peaks were screened. Based on hierarchical clustering analysis（HCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA）， the characteristic information that could be used for identification of Alumen was selected with variable importance in the projection（VIP） value>1. FTIR characteristic profiles of Alumen were established， and key wavenumbers for identification were screened by HCA and OPLS-DA with VIP value>1. Meanwhile， the thermogravimetric differences between Alumen and A. alum were analyzed by TG-DTA， and the thermogravimetric traits that could be used for identification were screened. ResultsAlumen and A. alum could not be effectively distinguished by traits alone. However， by comparing the PDF standard cards of XRD， 15 batches of Alumen and 12 batches of A. alum could be distinguished. In the XRD profiles， 10 characteristic peaks were confirmed， corresponding to diffraction angles of 14.560°， 24.316°， 12.620°， 32.122°， 17.898°， 34.642°， 27.496°， 46.048°， 40.697° and 21.973°. In the FTIR profiles， 4 wavenumber ranges（399.193-403.050， 1 186.010-1 471.420， 1 801.190-2 620.790， 3 612.020-3 997.710 cm^-1） and 12 characteristic wavenumbers（1 428.994， 1 430.922， 1 432.851， 1 434.779， 1 436.708， 1 438.636， 1 440.565， 1 442.493， 1 444.422， 1 446.350， 1 448.279， 1 450.207 cm^-1） were identified. In the TG-DTA profiles， there were characteristic decomposition peaks of ammonium ion and mass reduction features near 555.34 ℃ for A. alum. These characteristics could serve as important criteria for distinguishing the authenticity of Alumen. ConclusionXRD， FTIR and TG-DTA can be used to rapidly detect Alumen and A. alum， and combined with the discriminant features selected through chemometrics， the rapid and accurate identification of Alumen and A. alum can be achieved. The research findings provide new approaches for the rapid identification of Alumen.

ObjectiveTo explore the quantity-quality transfer process of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（Haliotis discus hannai） by analyzing the physical phase and compositional changes， so as to provide references for the effective control of its quality. MethodsA total of 20 batches of Haliotidis Concha（H. discus hannai） from different habitats were collected and prepared into corresponding calcined products and standard decoction， and the content of CaCO₃ of the three samples were determined and the extract yield and transfer rate of CaCO₃ were calculated. The changes in elemental composition and their relative contents were investigated by X-ray fluorescence spectrometry（XRF）， X-ray diffraction（XRD） was used to study the changes in the phase compositions of the three samples and to establish their respective XRD specific chromatogram. Fourier transform infrared spectrometry（FTIR） was used to study the changes in the chemical composition and content changes of the three samples and to establish their respective FTIR specific chromatogram， while combining hierarchical cluster analysis（HCA）， principal component analysis（PCA） and orthogonal partial least squares-discriminant analysis（OPLS-DA） to find the common and differential characteristics， in order to explore the quantity-quality transfer relationship in the preparation process of standard decoction of Haliotidis Concha（H. discus hannai）. ResultsThe CaCO₃ contents of the 20 batches of medicinal materials， decoction pieces and standard decoction of Haliotidis Concha（H. discus hannai） were 93.87%-98.95%， 96.02%-99.97% and 38.29%-51.96%， respectively， and the extract yield of standard decoction was 1.71%-2.37%， and the CaCO₃ transfer rate of decoction pieces-standard decoction was 0.68%-1.27%. XRF results showed that the elemental species and their relative contents contained in Haliotidis Concha and its calcined products had a high degree of similarity， and although there was no obvious difference in the elemental species contained in decoction pieces and standard decoction， the difference in the relative contents was obvious， which was mainly reflected in the decrease of the relative content of element Ca and the increase of the relative content of element Na. XRD results showed that Haliotidis Concha mainly contained CaCO₃ of aragonite and calcite， while calcined Haliotidis Concha only contained CaCO₃ of calcite， and standard decoction mainly contained CaCO₃ of calcite and Na₂CO₃ of natrite. FTIR results showed that there were internal vibrations of O-H， C-H， C=O， HCO₃^- and CO₃^2- groups in Haliotidis Concha， while O-H， HCO₃^- and CO₃^2- groups existed in the calcined products and standard decoction. ConclusionThe changes of Haliotidis Concha and calcined Haliotidis Concha are mainly the increase of CaCO₃ content， the transformation of CaCO₃ aragonite crystal form to calcite crystal form and the absence of organic components after calcination， and the changes of calcined products and standard decoction are mainly the decrease of CaCO₃ content and the increase of Na₂CO₃ relative content. The method established in the study is applicable to the quality control of the shellfish medicines-decoction pieces- standard decoction， which provides a new idea for the study of quality control of dispensing granules of shellfish medicines.

ObjectiveTo explore the differences in the accumulation of secondary metabolites of Dendrobium nobile cultivated on epiphytic stones and trees， so as to elucidate the scientific connotation of "only those that grow on stones has superior quality"， and provide a direction for the cultivation and quality evaluation of D. nobile. MethodsUltra-performance liquid chromatography-triple quadrupole/linear ion trap mass spectrometry（UPLC-QTRAP-MS/MS）-based widely targeted metabolomics was used to detect the metabolites of D. nobile cultivated on epiphytic stones and trees. And the combination of principal component analysis（PCA）， hierarchical cluster analysis（HCA）， and orthogonal partial least squares-discriminant analysis（OPLS-DA） was performed for multivariate statistical analysis of metabolites. Differential metabolites were screened by variable importance in the projection（VIP） value≥1 and log₂fold change（FC）≥1 or ≤-1， and Kyoto Encyclopedia of Genes and Genomes（KEGG） enrichment analysis was conducted. ResultsA total of 1 267 metabolites were identified in the stems of D. nobile from the two cultivation modes， dominated by flavonoids（292）， phenolic acids（284）， and alkaloids（189）. Through OPLS-DA screening， 473 differential metabolites were obtained. Compared to epiphytic tree-cultivated D. nobile， epiphytic stone-cultivated D. nobile exhibited upregulation of flavonoids， phenolic acids， alkaloids， lignans and coumarins， while quinones and terpenoids were down-regulated. The differential metabolites mainly included flavonoid glycosides and alkaloids， and these differential metabolites significantly contributed to characterizing the two cultivation patterns. KEGG enrichment analysis revealed significant enrichment in pathways of flavone and flavonol biosynthesis， flavonoid biosynthesis， tyrosine metabolism， and phenylalanine metabolism in epiphytic stone-cultivated D. nobile. ConclusionEpiphytic stone cultivation is beneficial for the accumulation of phenolic acids， flavonoids， and alkaloids in D. nobile， indicating that the "only those that grow on stones has superior quality" documented in the materia medica has certain scientific basis， and the findings also provide a reference for quality evaluation and discrimination research between epiphytic stone and tree cultivated D. nobile.

Advancements in artificial intelligence(AI)and emerging technologies are rapidly expanding the exploration of chemical space,facilitating innovative drug discovery.However,the transformation of novel compounds into safe and effective drugs remains a lengthy,high-risk,and costly process.Comprehensive early-stage evaluation is essential for reducing costs and improving the success rate of drug development.Despite this need,no comprehensive tool currently supports systematic evaluation and efficient screening.Here,we present druglikeFilter,a deep learning-based framework designed to assess drug-likeness across four critical dimensions:1)physicochemical rule evaluated by systematic determination,2)toxicity alert investigated from multiple perspectives,3)binding affinity measured by dual-path analysis,and 4)compound synthesizability assessed by retro-route prediction.By enabling automated,multidimensional filtering of compound libraries,druglikeFilter not only streamlines the drug development process but also plays a crucial role in advancing research efforts towards viable drug candidates,which can be freely accessed at https://idrblab.org/drugfilter/.

OBJECTIVE To preliminarily assess the horizontal sound localization and its influencing factors in patients with unilateral sudden sensorineural hearing loss during the acute phase.METHODS The azimuth discrimination test and azimuth identification test were completed,with the speech sound(65 dB SPL)as the stimulus.The minimum audible angle(MAA)and root-mean-square error(RMSE)were obtained,and the RMSE of the affected side and the healthy side were calculated respectively.According to the WHO(2021)hearing loss classification criteria,the data were analyzed based on the pure-tone average(PTA)of the affected ear.And the best resident hearing at each frequency of the affected ear was recorded.RESULTS The performance of the unilateral sudden sensorineural hearing loss patients in the sound localization varied greatly.Some performed close to the normal level,while others completely lost the ability to localize sound.The RMSE of the moderate hearing loss group(≥35 dB HL)was significantly higher than that of the normal hearing group(P<0.01),the MAA of the moderate to severe hearing loss group(≥50 dB HL)showed statistically significant differencescompared with normal hearing group(P<0.001).The RMSE of the affected side of patients in the severe and above hearing loss group was significantly larger than that of the healthy side.Regression analysis showed that the best resident hearing at each frequency of the affected ear was the most significant factor affecting MAA(R2=0.572,P<0.001)and RMSE(R2=0.768,P<0.001).CONCLUSION The horizontal sound localization of unilateral sudden sensorineural hearing loss patients in the acute phase varies greatly.When the PTA of the affected side reaches moderate hearing loss,the localization ability is significantly lower than that of normal-hearing individuals.The best resident hearing at each frequency of the affected ear is the key factor affecting the localization ability.

Advancements in artificial intelligence (AI) and emerging technologies are rapidly expanding the exploration of chemical space, facilitating innovative drug discovery. However, the transformation of novel compounds into safe and effective drugs remains a lengthy, high-risk, and costly process. Comprehensive early-stage evaluation is essential for reducing costs and improving the success rate of drug development. Despite this need, no comprehensive tool currently supports systematic evaluation and efficient screening. Here, we present druglikeFilter, a deep learning-based framework designed to assess drug-likeness across four critical dimensions: 1) physicochemical rule evaluated by systematic determination, 2) toxicity alert investigated from multiple perspectives, 3) binding affinity measured by dual-path analysis, and 4) compound synthesizability assessed by retro-route prediction. By enabling automated, multidimensional filtering of compound libraries, druglikeFilter not only streamlines the drug development process but also plays a crucial role in advancing research efforts towards viable drug candidates, which can be freely accessed at https://idrblab.org/drugfilter/.

Objective:To extract and evaluate the relevant evidence to improve the family discharge preparation of premature infants with bronchopulmonary dysplasia, so as to provide evidence-based basis for clinical formulation of scientific and effective discharge plans.Methods:All the evidence on the family discharge readiness of premature infants with bronchopulmonary dysplasia was collected from Chinese and English databases or websites, and the quality of various studies was evaluated. JBI′s evidence grading and recommendation level system (2014 edition) was used to extract and summarize the evidence.Results:A total of 21 articles were included, and 24 pieces of evidence were summarized, which were divided into seven themes: pre-discharge planning, environmental preparedness, parent education and training, support systems, feeding and nutrition, respiratory management, and discharge follow-up.Conclusions:For preterm infants with bronchopulmonary dysplasia, discharge readiness should be improved in terms of standardizing discharge criteria and implementing a discharge plan; improving family care preparation to ensure discharge support; strengthening health management and implementing a personalized plan; and continuing high-quality follow-up to ensure long-term health.

Objective:To investigate the value of diffusion kurtosis imaging (DKI) and 18F-prostate specific membrane antigen (PSMA)-1007 in the differential diagnosis of prostate cancer (PCa) and benign prostatic hyperplasia (BPH) by using PET/MR imaging. Methods:From June 2019 to December 2022, a retrospective analysis was conducted on 134 patients ((65.5±10.0) years) with prostate diseases who underwent 18F-PSMA-1007 PET/MR whole-body examination at Ruijin Hospital, Shanghai Jiao Tong University School of Medicine, with the prostate specific antigen (PSA) level continuously rising to >4μg/L within 1 month and not yet receiving treatment. Patients were divided into 2 groups (PSA<10μg/L and PSA≥10μg/L). The PET/MR examination included high b-value diffusion imaging, and the ROI was delineated based on the prostate diffusion weighted imaging (DWI) high-signal area and apparent diffusion coefficient (ADC) low-signal area by the professional radiology physician. The SUV max, mean kurtosis (MK), and mean diffusivity (MD) were obtained. Spearman rank correlation analysis was performed, and ROC curve was used to analyze the diagnostic efficacy. Results:Of 134 patients, 72 were with PSA<10μg/L and 62 were with PSA≥10μg/L. There were 68 patients who obtained biopsy results, including 37 cases of BPH and 31 cases of PCa. In PSA<10μg/L group, there were no significant correlations between MK and SUV max, MK and PSA ( rs values: 0.22, 0.06, P values: 0.065, 0.603). In the PSA≥10μg/L group, there were positive correlations between MK and SUV max, MK and PSA ( rs values: 0.52, 0.40, P values: 0.008, 0.005). In the PSA<10μg/L group, SUV max, MK, and MD showed no diagnostic value (AUCs: 0.44-0.67, all P>0.05), while the AUC for combined diagnosis using these three parameters was 0.78( P=0.008). In the PSA≥10μg/L group, the AUCs of SUV max, MK, and MD were 0.81( P=0.001), 0.84( P<0.001) and 0.72( P=0.023) respectively, and the AUC for combined diagnosis using these three parameters was 0.91( P<0.001). Conclusion:The combination of MK, MD and SUV max improves the diagnostic efficacy of PCa in PET/MR examination.