Objective: This study investigated the effect of applying different torque values on the sagittal displacement tendency of mandibular incisors during intrusion using clear aligners, with the aim of providing a reference for achieving true vertical intrusion (intrusion without labiolingual movement) of mandibular incisors in clear aligner therapy. Methods: This study was approved by the institutional ethics committee. A volunteer with an incisor mandibular plane angle of 94° was selected. Using cone-beam computed tomography and intraoral scan data, a high-precision three-dimensional finite element model was established. An intrusion amount of 0.2 mm was set for the mandibular incisors, and four simulation groups were defined by applying 0°, 1°, 2°, and 3° of root labial torque. The displacement tendency of the incisors and the stress distribution within the periodontal ligament were analyzed. Results: When 0° of root labial torque was applied, the mandibular incisors exhibited intrusion accompanied by crown-labial, root-lingual inclination. When 1°-3° of root labial torque was applied, the mandibular incisors exhibited intrusion accompanied by the inclination gradually shifted from crown-labial, root-lingual towards crown-lingual, root-labial. Based on the line graph of sagittal displacement, the central incisors and lateral incisors approximated true vertical intrusion when 1.8° and 2.5° of root labial torque was applied, respectively. The mandibular canines consistently exhibited extrusion accompanied by labial crown inclination. Stress within the periodontal ligament of the incisors and canines was primarily concentrated at the root apex and cervical region. After applying root labial torque, the area of stress concentration in the incisors cervical periodontal ligament shifted from the labial side to the lingual side. The stress in the periodontal ligament at the cervical region of the canines is predominantly concentrated on the labial side. Conclusion Applying appropriate torque control during mandibular incisor intrusion with clear aligners facilitates true vertical intrusion, thereby enhancing the efficiency of the intrusion.

Objective To investigate the epidemiological characteristics of cross-county imported dengue fever cases within Yunnan province in 2023, so as to provide insights into formulation of preventive and control measures for intra-provincial spread of dengue fever. Methods All data pertaining cross-county imported dengue fever cases within Yunnan Province in 2023 were collected, and the temporal, regional and population distributions of the cases were descriptively analyzed. Results A total of 1 664 intra-provincial cross-county imported dengue fever cases were reported in 95 counties (cities, districts) cross 16 profectures (cities) in Yunnan Province in 2023, accounting for 12.34% of total cases in the province. Cross-county imported dengue fever cases were predominantly reported during the period between August and October (1 516 cases, 91.11% of total cases), and peaked in September (659 cases), with a single-day peak on October 8 (36 cases). During the period from September 4 to 10, five counties (cities) with local dengue fever epidemics, including Jinghong City of Xishuangbanna Dai Autonomous Prefecture, Gengma Dai and Wa Autonomous County of Lincang City, Ruili City of Dehong Dai and Jingpo Autonomous Prefecture, Mengla Coun ty of Xishuangbanna Dai Autonomous Prefecture, and Zhenkang County of Lincang City, exported 165 cross-county imported dengue fever cases to the rest of the province. Among the 1 644 intra-provincial cross-county imported dengue fever cases, the male to female ratio was 1.40∶1.00, and 1 329 cases were at ages of 15 to 55 years (79.87%), with farmers as the predominant occupation (886 cases, 53.25%). The top 5 counties (cities/districts) reporting the highest number of intra-provincial cross-county imported dengue fever cases included Simao District (266 cases) and Lancang Lahu Autonomous County (118 cases) of Pu’er City, Mengla County (91 cases) and Menghai County (91 cases) of Xishuangbanna Dai Autonomous Prefecture, and Mangshi City (73 cases) of Dehong Dai and Jingpo Autonomous Prefecture, which accounting for 38.40% of total imported cases. These intra-provincial cross-county imported dengue fever cases originated from 7 counties (cities/districts) in 4 prefectures (cities), including 1 261 cases (76.70%) from Jinghong City of Xishuangbanna Dai Autonomous Prefecture, 224 cases (13.63%) from Ruili City of Dehong Dai and Jingpo Autonomous Prefecture, 103 cases (6.27%) from Gengma Dai and Wa Autonomous County of Lincang City, 31 cases (1.89%) from Mengla County of Xishuangbanna Dai Autonomous Prefecture, 30 cases (1.82%) from Zhenkang County of Lincang City, 10 cases (0.61%) from Cangyuan Wa Autonomous County of Lincang City, and 5 cases (0.30%) from Mohan-Boten Economic Cooperation Zone of Kunming City. In addition, local dengue fever epidemics following intra-provincial cross-county importation of dengue fevers cases in Simao District, Jinggu Dai and Yi Autonomous County, Mangshi City, Longchuan County, and Cangyuan Wa Autonomous County. Conclusions Farmers and students are high-risk populations for intra-provincial cross-county imported dengue fever cases in Yunnan Province, and health education pertaining personal protection against dengue fever should be strengthened among these high-risk populations by governments at all levels. There is a high risk of local out-break of dengue fever following continuous introduction of intra-provincial cross-county imported cases. Standardized management of intra-provincial cross-county imported dengue fever cases should be reinforced to reduce the risk of local epidemics.

Right atrial diverticulum is a rare congenital cardiac malformation with a very low incidence and few reports in the literature. It is a sac-like structure originating from the free wall of the right atrium or the right auricle，and the wall of the diverticulum is mostly composed of normal myocardial tissue. Patients with diverticulumare asymptomatic in the early stage of the disease，and it is mostly detected by imaging examinations. The patient was a 96-year-old male admitted to the Second Hospital of Hebei Medical University with intermittent chest tightness，shortness of breath，and dizziness for more than half a month. Echocardiography and contrast echocardiography were performed 1 d after the patient was admitted to the hospital，suggesting the diagnasis of right atrial diverticulum with thrombosis，and coronary CT angiography was performed 4 d after the patient was admitted to the hospital，which considered right atrial diverticulum，with an internal filling defect，and suspected thrombus formation. The patient was older and did not receive further diagnosis and treatment，and cardiac ultrasound was repeated 1 month later，with no significant change in the size and morphology of the mass within the right atrial diverticulum. By analyzing in detail a case with right atrial diverticulum initially misdiagnosed as pericardial effusion，this article aimed to raise cardiac sonographers' awareness of the diagnosis of right atrial diverticulum and to explore the key role of cardiac acoustic contrast technology in cardiac ultrasound diagnosis.

Objective:To utilize the left ventricular myocardial work（LVMW）technique for early identification of myocardial damage in patients with fabry disease（FD）.Methods:In an observational cross-sectional study，35 patients with FD who visited the Second Hospital of Hebei Medical University from February 2023 to April 2024 were included. They were categorized into two groups based on left ventricular mass index（LVMI）：the non-left ventricular hypertrophy group（LVH-FD group，14 cases）and the left ventricular hypertrophy group（LVH+FD group，21 cases）. Further gender-stratified analysis was performed on parameters related to left ventricular global longitudinal strain（LVGLS）and LVMW. Additionally，for the FD group with normal LVGLS，a comparison of their LVMW-related parameters was made with a control group. A control group consisting of 28 healthy subjects from the same period was selected for comparison. The LVGLS，global work index（LVGWI），global constructive work（LVGCW），global wasted work（LVGWW），and global work efficiency（LVGWE）of the three groups were analyzed using two-dimensional speckle tracking and non-invasive myocardial work techniques，and intergroup comparisons of these parameters were performed. Pearson's linear correlation was applied to analyse the correlation between LVGWI，LVGWE and LVMI.Results:① According to the LVMI grouping results，compared with the control group，the LVH-FD group showed decreased LVGWI（ P<0.05），while the LVH+FD group exhibited reductions in LVGLS，LVGWI，and LVGWE（all P<0.05）. Compared to the LVH-FD group，the LVH+FD group demonstrated lower LVGLS，LVGWI，and LVGWE（all P<0.05）. ② Gender subgroup analysis revealed that in the female subgroup，no statistically significant differences were observed in LVGLS，LVGWI，and LVGWE between the female control group and the female LVH-FD group（all P>0.05）. However，the female LVH+ FD group showed decreased LVGLS，LVGWI，and LVGWE compared to both the female control group（all P<0.05）and the female LVH-FD group（all P<0.05）. In the male subgroup，compared to the male control group，the male LVH-FD group had reduced LVGWI（ P<0.05）but no significant differences in LVGLS or LVGWE（both P>0.05）. The male LVH+ FD group displayed lower LVGLS，LVGWI，and LVGWE compared to both the male control group（all P<0.05）and the male LVH- FD group（all P<0.05）. ③Compared with the control group，the LVGLS-normal FD group had a reduced LVGWI（ P<0.05），while there were no statistically significant differences in LVGLS，LVGWE，LVGCW，and LVGWW between these two groups（all P>0.05）. ④LVGWI and LVGWE were negatively correlated with LVMI（ r=-0.617，-0.707；both P<0.001）. Conclusions:LVMW can detect early cardiac dysfunction in patients with FD and is of guiding value for their clinical management.

BACKGROUND:The utilization of miniscrews for assisting in molar distalization with clear aligners is a commonly adopted clinical approach.However,treatment outcomes may be influenced by the implantation position of miniscrew and the hooks in various tooth location.OBJECTIVE:To analyze the biomechanical effects of hooks at different tooth positions and the assistance of buccal and palatal miniscrews in distalizing molars with clear aligners by using the finite element method.METHODS:By integrating volunteer cone beam CT and Itero intraoral scan data,high-precision finite element models were constructed to simulate the combined use of miniscrews and hooks to assist in the distalization of the maxillary first and second molars with clear aligners,aiming for a designed distalization magnitude of 0.2 mm.Four conditions were established based on the placement of buccal or palatal miniscrews,as well as the located of hooks at the canine or first premolar.The buccal anchorage screw was used in combination with hooks on the buccal side of the canine;the buccal anchorage screw was used in combination with hooks on the buccal side of the first premolar;the palatal anchorage screw was used in combination with hooks on the lingual side of the canine,and the palatal anchorage screw was used in combination with hooks on the lingual side of the first premolar.Analysis using ANSYS software was conducted to evaluate the three-dimensional displacement trends of maxillary teeth and the maximum equivalent stress on the periodontal ligament under each condition.RESULTS AND CONCLUSION:(1)Regardless of whether hooks were placed on canines or first premolars,palatal miniscrews had been shown to enhance the distal movement of maxillary molars and reduce the mesial movement of premolars as well as the labial tipping tendency of anterior teeth,compared to buccal miniscrews.The maximum equivalent stress in the periodontal ligament of molars was increased,while that of anterior teeth was decreased.(2)Regardless of whether the miniscrews were located on the buccal or palatal side,compared with hooks at the first premolar,when hooks were done at the canine,the labial inclination trend of the anterior teeth was reduced,the distal movement of the molars was reduced,the mesial movement of the premolars was increased,and the maximum equivalent stress of the molar and the periodontal membrane of the anterior teeth was reduced.(3)Regardless of whether miniscrews were located on the buccal or palatal side,and the hooks were located on the canine or the first premolar,the molar could not achieve overall movement.(4)The results show that clear aligner combined with palatal miniscrews and hooks at the first premolar are more conducive to improving the efficiency of maxillary molar distalization,but attention should be paid to protecting the anterior tooth miniscrews and molar torque control;clear aligner combined with palatal miniscrews and hooks at the canine is more conducive to reducing the labial tipping tendency of anterior teeth,but the efficiency of molar distalization will be relatively reduced.

Congenital orofacial cleft, the most common birth defect in the maxillofacial region, exhibits a wide range of prognosis depending on the severity of deformity and underlying etiology. Non-syndromic congenital orofacial clefts typically present with milder deformities and more favorable treatment outcomes, whereas syndromic congenital orofacial clefts often manifest with concomitant organ abnormalities, which pose greater challenges for treatment and result in poorer prognosis. This consensus provides an elaborate classification system for varying degrees of orofacial clefts along with corresponding diagnostic and therapeutic guidelines. Results serve as a crucial resource for families to navigate prenatal screening results or make informed decisions regarding treatment options while also contributing significantly to preventing serious birth defects within the development of population.
Humans ; Cleft Lip/diagnosis* ; Cleft Palate/diagnosis* ; Consensus ; Prenatal Diagnosis ; Female

Objective To evaluate the effect of relaxation training combined with basic psychological intervention on attention deficit factor score in children with attention deficit hyperactivity disorder.Methods A total of 320 children with attention deficit hyperactivity disorder were enrolled in Anhui Children's Hospital affiliated to Anhui Medical University from April 2022 to April 2024.The children were divided into 2 groups by random number table method with 160 cases in each.The control group received basic psychological intervention and the observation group received relaxation training combined with psychological intervention.Attention deficit factor score,hyperac-tivity factor score,oppositional defiant factor score,Weiss Functional Deficit Scale(parent version)score and satis-faction were compared between the two groups.Results The Pittsburgh Sleep Quality Index(PSQI)score of the observation group was higher(17.35±1.42)than that of the control group(P＜0.05).The scores of Attention Defi-cit Hyperactivity Disorder Rating Scale-Parent Version(SNAP-Ⅳ)in observation group were lower than those in control group(P＜0.05),including attention deficit factor(14.25±1.58),hyperactivity factor(12.01±1.33)and oppositional defiant factor(9.79±1.27).There was no difference in Weiss functional deficit Scale(parent version)between the two groups before intervention,and Weiss functional deficit scale(parent version)score of the obser-vation group was higher than that of the control group after intervention(P＜0.05).The satisfaction of observation group was higher than that of control group(P＜0.05).Conclusions The effect of relaxation training combined with psychological intervention is obvious in children with attention deficit hyperactivity disorder,and the symptoms of attention deficit are significantly improved.

Objective To clone the glycosyltransferase gene UGT708Z1 in Anemarrhena asphodeloides and perform its bioinformatics analysis,prokaryotic expression analysis and functional characterization.Methods A candidate glycosyltransferase gene UGT708Z1 was mined and screened out from Anemarrhena asphodeloides based on the transcriptome data.According to its full-length open reading frame,the specific primers with homologous arms were designed.Subsequently,the UGT708Z1 gene was cloned by PCR.The prokaryotic expression recombinant vector pET-32a(+)-UGT708Z1 was constructed through homologous recombination technology,and the soluble target protein was obtained by prokaryotic expression and purified protein technology.Finally,the function of UGT708Z1 was identified through enzymatic reaction in vitro.Results Sequence analysis showed that the open reading frame of UGT708Z1 was 1377 bp,encoding 458 amino acids.The result of prokaryotic expression showed that UGT708Z1 successfully expressed the soluble target protein,and the purified recombinant protein was 70.86 kDa.The results of enzymatic reaction in vitro showed that UGT708Z1 had flavonoid 7-OH glycosylation activity and could catalyze icaritin to produce icariside I.In addition,UGT708Z1 also possessed the activities of catalyzing the 7-O-glycosylation of quercetin and apigenin.Conclusion In this study,a flavonol glycosyltransferase UGT708Z1 was successfully cloned and identified from Anemarrhena asphodeloides,which would lay a foundation for further analysis of flavonol glycosides biosynthesis.

Objective To clone the glycosyltransferase gene UGT708Z1 in Anemarrhena asphodeloides and perform its bioinformatics analysis,prokaryotic expression analysis and functional characterization.Methods A candidate glycosyltransferase gene UGT708Z1 was mined and screened out from Anemarrhena asphodeloides based on the transcriptome data.According to its full-length open reading frame,the specific primers with homologous arms were designed.Subsequently,the UGT708Z1 gene was cloned by PCR.The prokaryotic expression recombinant vector pET-32a(+)-UGT708Z1 was constructed through homologous recombination technology,and the soluble target protein was obtained by prokaryotic expression and purified protein technology.Finally,the function of UGT708Z1 was identified through enzymatic reaction in vitro.Results Sequence analysis showed that the open reading frame of UGT708Z1 was 1377 bp,encoding 458 amino acids.The result of prokaryotic expression showed that UGT708Z1 successfully expressed the soluble target protein,and the purified recombinant protein was 70.86 kDa.The results of enzymatic reaction in vitro showed that UGT708Z1 had flavonoid 7-OH glycosylation activity and could catalyze icaritin to produce icariside I.In addition,UGT708Z1 also possessed the activities of catalyzing the 7-O-glycosylation of quercetin and apigenin.Conclusion In this study,a flavonol glycosyltransferase UGT708Z1 was successfully cloned and identified from Anemarrhena asphodeloides,which would lay a foundation for further analysis of flavonol glycosides biosynthesis.

BACKGROUND:The utilization of miniscrews for assisting in molar distalization with clear aligners is a commonly adopted clinical approach.However,treatment outcomes may be influenced by the implantation position of miniscrew and the hooks in various tooth location.OBJECTIVE:To analyze the biomechanical effects of hooks at different tooth positions and the assistance of buccal and palatal miniscrews in distalizing molars with clear aligners by using the finite element method.METHODS:By integrating volunteer cone beam CT and Itero intraoral scan data,high-precision finite element models were constructed to simulate the combined use of miniscrews and hooks to assist in the distalization of the maxillary first and second molars with clear aligners,aiming for a designed distalization magnitude of 0.2 mm.Four conditions were established based on the placement of buccal or palatal miniscrews,as well as the located of hooks at the canine or first premolar.The buccal anchorage screw was used in combination with hooks on the buccal side of the canine;the buccal anchorage screw was used in combination with hooks on the buccal side of the first premolar;the palatal anchorage screw was used in combination with hooks on the lingual side of the canine,and the palatal anchorage screw was used in combination with hooks on the lingual side of the first premolar.Analysis using ANSYS software was conducted to evaluate the three-dimensional displacement trends of maxillary teeth and the maximum equivalent stress on the periodontal ligament under each condition.RESULTS AND CONCLUSION:(1)Regardless of whether hooks were placed on canines or first premolars,palatal miniscrews had been shown to enhance the distal movement of maxillary molars and reduce the mesial movement of premolars as well as the labial tipping tendency of anterior teeth,compared to buccal miniscrews.The maximum equivalent stress in the periodontal ligament of molars was increased,while that of anterior teeth was decreased.(2)Regardless of whether the miniscrews were located on the buccal or palatal side,compared with hooks at the first premolar,when hooks were done at the canine,the labial inclination trend of the anterior teeth was reduced,the distal movement of the molars was reduced,the mesial movement of the premolars was increased,and the maximum equivalent stress of the molar and the periodontal membrane of the anterior teeth was reduced.(3)Regardless of whether miniscrews were located on the buccal or palatal side,and the hooks were located on the canine or the first premolar,the molar could not achieve overall movement.(4)The results show that clear aligner combined with palatal miniscrews and hooks at the first premolar are more conducive to improving the efficiency of maxillary molar distalization,but attention should be paid to protecting the anterior tooth miniscrews and molar torque control;clear aligner combined with palatal miniscrews and hooks at the canine is more conducive to reducing the labial tipping tendency of anterior teeth,but the efficiency of molar distalization will be relatively reduced.