Purpose: The aim of this study is to compare the detection ability of quality of life (QoL) changes and responsiveness of the KOrean QUality of life in Stomach cancer patients Study group (KOQUSS)-40 and European Organization for Research and Treatment of Cancer Quality of Life Questionnaire (EORTC QLQ). Materials and Methods: A multicenter prospective observational study was conducted to evaluate QoL changes after various gastrectomies between January 2021 and April 2022. Participants were instructed to complete the KOQUSS-40 and EORTC QLQ-C30/STO22 preoperatively and at 1, 3, 6, and 12 months postoperatively. QoL changes over time and QoL responsiveness were assessed for each questionnaire. Results: Data from 491 patients who underwent curative gastrectomy for gastric cancer at 22 institutions were analyzed. The summary scores of the KOQUSS-40 and EORTC QLQ-STO22 showed significant differences between the total and proximal gastrectomy groups (p=0.044 and p=0.038, respectively), but no difference was observed for the EORTC QLQ-C30. Dysphagia on the KOQUSS-40 was significantly different between the total and proximal gastrectomy groups (p=0.031); however, dysphagia on the EORTC QLQ-STO22 did not differ. The responsiveness of the KOQUSS-40 was similar to that of the EORTC QLQ in patients who experienced ≥ 10% body weight loss, but approximately 10% less in patients receiving adjuvant chemotherapy than the EORTC QLQ. Conclusion KOQUSS-40 has several advantages over EORTC QLQ-C30/STO22 when comparing QoL between the total and proximal gastrectomy groups. The findings provide information for researchers investigating the QoL of patients who have undergone curative gastrectomy for gastric cancer.

Due to the poor ionization efficiency and the weak mass spectrometry(MS)intensity of weakly polar substances,direct analysis using the traditional electrospray ionization mass spectrometry(ESI-MS)is a big challenge.In this study,a novel rapid on-site detection method of four prohibited sex hormones in cosmetics was proposed using online derivatization strategy coupled with a miniature mass spectrometer.The target substances in the samples were extracted by a custom-made polyaniline/multi-walled carbon nanotube solid-phase microextraction(SPME)probe.The stirring speed was 200 r/min,the extraction temperature was 40℃,and the extraction time was 2 min.A pulled dual-channel θ borosilicate glass capillary emitter was used as the nano-ESI ion source.The SPME probe was inserted into the channel containing methanol in theθborosilicate glass capillary.When the spray voltage was applied,the four sex hormones were desorbed and formed spray microdroplets,which then collided with the hydroxylamine microdroplets generated from the other channel.The microdroplets of reaction product entered into the miniature mass spectrometer for direct analysis.The limits of detection(LOD)and limits of quantification(LOQ)for the four sex hormones were 10-20 ng/mL and 20-50 ng/mL,respectively.The recoveries were from 84.6%to 107.8%with the relative standard deviations(RSD)from 4.1%to 11.6%.Compared to detection without derivatization,the MS signals of the four target substances were increased by 3 to 15 times.This method was simple,rapid,highly efficient and sensitive,and suitable for on-site rapid analysis of weakly polar sex hormones in cosmetics.

This study investigated the drug resistance and genetic relationships among strains co-existing in animals,the environ-ment,and the living quarters of employees at large-scale pig farms in certain regions of Shandong Province,to provide a scientific ba-sis for elucidating the transmission mechanisms of drug-resistant bacteria through bacterial traceability analysis.Samples were col-lected from two pig farms,and bacteria were isolated and purified.The species of the isolated strains were identified via 16S rRNA gene sequencing.Antimicrobial susceptibility testing was conducted with a VITEK-2 Compact system and the disk diffusion method for strains present in pigs,the environment,and living areas.Furthermore,whole-genome sequencing was performed on the Illumina Miniseq platform to annotate drug resistance genes,and multilocus sequence typing(MLST)and core genome single nucleotide poly-morphism(cgSNP)analyses were used to trace the resistant strains.Three species—Staphylococcus aureus,Pseudomonas aeruginosa,and Bacillus cereus—were isolated and cultured from animals,the environment,and employee living areas,and their distributions were analyzed.These strains exhibited diverse drug resistance spectra and genetic diversity.Additionally,the strains displayed highly consistent resistance profiles,resistance genes,ST types,and SNP loci in pig urine,soil both inside and outside the facility,human drinking water,and the cafeteria and dormitories.Our findings indicated a potential risk of transmission of opportunistic pathogens be-tween the pig farming area and the living quarters.Particular attention should be paid to the environmental transmission of methicillin-resistant Staphylococcus aureus.

Purpose: This study evaluated the postoperative quality of life (QoL) after various types of gastrectomy for gastric cancer. Materials and Methods: A multicenter prospective observational study was conducted in Korea using the Korean Quality of Life in Stomach Cancer Patients Study (KOQUSS)-40, a new QoL assessment tool focusing on postgastrectomy syndrome. Overall, 496 patients with gastric cancer were enrolled, and QoL was assessed at 5 time points: preoperatively and at 1, 3, 6, and 12 months after surgery. Results: Distal gastrectomy (DG) and pylorus-preserving gastrectomy (PPG) showed significantly better outcomes than total gastrectomy (TG) and proximal gastrectomy (PG) with regard to total score, indigestion, and dysphagia. DG, PPG, and TG also showed significantly better outcomes than PG in terms of dumping syndrome and worry about cancer. Postoperative QoL did not differ significantly according to anastomosis type in DG, except for Billroth I anastomosis, which achieved better bowel habit change scores than the others. No domains differed significantly when comparing double tract reconstruction and esophagogastrostomy after PG. The total QoL score correlated significantly with postoperative body weight loss (more than 10%) and extent of resection (P<0.05 for both).Reflux as assessed by KOQUSS-40 did not correlate significantly with reflux observed on gastroscopy 1 year postoperatively (P=0.064). Conclusions Our prospective observation using KOQUSS-40 revealed that DG and PPG lead to better QoL than TG and PG. Further study is needed to compare postoperative QoL according to anastomosis type in DG and PG.

Objective:To construct a health education checklist for safety management of oral antitumor drugs in tumor patients, so as to provide a guidance for clinical nurses in practice, thereby improving the drug safety of patients taking oral antitumor drugs.Methods:Based on the cognition-behavior theoretical framework, a preliminary draft of a health education checklist for safety management of oral antitumor drugs in tumor patients was developed through literature review. The Delphi method was used to conduct consultations with 17 experts from July to September 2024 to revise and add or delete the contents of the checklist based on the experts' assignments of importance to the indicators at each level and the textual comments made.Results:A total of two rounds of expert consultation were conducted. The final established health education checklist for safety management of oral antitumor drugs in tumor patients included 4 primary and 28 secondary indicators. In the two rounds of consultation, the positive coefficient of experts was 100.0%, the coefficient of expert authority was 0.93, the coefficients of variation for the two rounds of expert ratings were 0 to 0.173 and 0 to 0.151, and the coefficients of Kendall's concordance were 0.141 (χ 2=74.461, P<0.001) and 0.113 (χ 2=59.549, P=0.002) , respectively. Conclusions:The health education checklist for safety management of oral antitumor drugs in tumor patients has good scientific, reliable and clinical practical value, which can provide scientific, standardized and convenient practical guidance for clinical nurses to implement health education on drug safety management for patients taking oral antitumor drugs.

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size

OBJECTIVE: To determine risk factors for cutout failure in geriatric intertrochanteric fracture patients after cephalomedullary nail fixation. METHODS: A retrospective review of 518 elderly patients who underwent cephalomedullary nail fixation for intertrochanteric fractures between January 2008 and August 2018 was conducted, including 167 males and 351 females, age from 65 to 97 years old. All patients were followed up for at least one year after surgery and divided into a healed group and a cutout group based on whether the hip screw cutout occurred. Among all patients, 10 cases experienced hip screw cutout. The general information, surgical data, and radiological data of the two groups were compared, and risk factors influencing hip screw cutout were analyzed. Propensity score matching was then performed on the cutout group based on gender, age, body mass index(BMI), and American Society of Anesthesiologists(ASA), and 40 patients from the healed group were matched at a ratio of 1∶4. Key risk factors affecting hip screw cutout were further analyzed. Multivariable logistic regression analysis was conducted to evaluate associations between variables and cutout failure. RESULTS: There were no statistically significant differences between the healed group and the cutout group in terms of age, gender, BMI, ASA, and AO classification. However, statistically significant differences were observed between the two groups in terms of reduction quality(P=0.003) and tip-apex distance(TAD), P<0.001. Multivariate analysis identified poor reduction quality OR=23.138, 95%CI(2.163, 247.551), P=0.009 and TAD≥25 mm OR=30.538, 95%CI(2.935, 317.770), P=0.004 as independent risk factors for cutout failure. CONCLUSION The present study identified poor reduction quality and TAD≥25 mm as factors for cutout failure in geriatric intertrochanteric fractures treated with cephalomedullary nails. Further studies are needed to calculate the optimal TAD for cephalomedullary nails.
Humans ; Male ; Female ; Hip Fractures/surgery* ; Aged, 80 and over ; Aged ; Risk Factors ; Retrospective Studies ; Fracture Fixation, Intramedullary/adverse effects* ; Bone Nails ; Bone Screws

OBJECTIVE: To explore the early clinical outcomes of 3D printed individualised customised prostheses for in hip revision in patients with combined severe bone defects. METHODS: Twenty-two patients from January 2021 to May 2023 underwent hip revision using 3D printed personalised customised prostheses were retrospective analyzed, including 10 males and 12 females, age 28 to 78 with a mean of (58.9±12.8) years old. All of patients were combined with severe bone defects (Parprosky type Ⅲ). Among of them, 9 patients had periprosthetic infections and 13 patients had aseptic prosthesis loosening. All patients were treated with a 3D printed personalised prosthesis protocol, patients with the periprosthetic infection received a second stage revision after infection control. The operation time, preoperative waiting time, intraoperative and postoperative complications were recorded, and the clinical efficacy were evaluated at the final follow-up using the visual analogue scale (VAS) for pain, the Harris hip score. RESULTS: One patient was lost to follow-up and the remaining 21 patients were followed up for 10 to 15 with a mean of (12.91±1.44) months after surgery. All patients completed surgery as planned, with an operative time of 135 to 390 with a mean of (165.4±39.3) minutes and a preoperative waiting time of 7 to 16 with a mean of (10.5±3.3) days. Regarding patient complications:one patient had a severe intraoperative periprosthetic femoral fracture due to the combination of severe osteoporosis; one patient had an intraoperative greater trochanteric femur fracture. At the latest follow-up, all patients had good position of the custom-made prosthesis and no loosening of the prosthesis;all patients had good wound healing and no local redness or swelling. The total Harris score at the final follow-up (85.86±7.04) was significantly improved compared to the preoperative (44.86±2.36), P<0.001. The VAS at the last follow-up (2.19±0.87) was significantly improved compared with preoperative (7.41±0.96), P<0.001. CONCLUSION The clinical efficacy of 3D-printed personalised customised prosthesis in combined severe bone defect hip revision is satisfactory, but due to the increased preoperative waiting time of the patients and certain risks, certain indications should be mastered when applying in the clinic.
Humans ; Male ; Female ; Printing, Three-Dimensional ; Middle Aged ; Aged ; Adult ; Retrospective Studies ; Hip Prosthesis ; Arthroplasty, Replacement, Hip ; Reoperation ; Prosthesis Design ; Treatment Outcome