ObjectiveTo investigate the changes in chemical components of Gardeniae Fructus（GF） before and after being charred， providing data support for research on the material basis of GF Carbonisata（GFC）. MethodsUltra-performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry（UPLC-Q-Orbitrap MS/MS） was used to conduct a comprehensive analysis of the chemical components in GF and GFC under positive and negative ion modes with Compound Discoverer 3.3 software and online database. Then， principal component analysis and partial least squares-discriminant analysis in SIMCA14.1 software were used to analyze the MS data of each sample. Based on the principle of variable importance in the projection（VIP） value>1， differential secondary and primary metabolites before and after carbonization were screened. In addition， MetaboAnalyst website was used for pathway enrichment of Kyoto Encyclopedia of Genes and Genomes（KEGG）， so as to provide a reference for clarifying the processing mechanism. ResultsA total of 185 components were identified， including 96 secondary metabolites and 89 primary metabolites. These components were classified into nine categories， primarily including iridoid glycosides， flavonoids， and terpenoids， their fragmentation pathways were also analyzed. Simultaneously， multivariate statistical analysis was performed on the secondary and primary metabolites， identifying 70 and 59 differential metabolites， respectively. The secondary metabolites were enriched in two metabolic pathways， including C5-branched dibasic acid metabolism and flavonoid and flavonol biosynthesis， while the primary differential metabolites were enriched in seven pathways such as linoleic acid metabolism and tyrosine metabolism. ConclusionThe chemical components of GF change significantly after carbonization， with a significant decrease in the contents of iridoid glycosides and terpenoids such as hydroxyisogeniposide， crocin Ⅱ， crocetin， and jasminoside B. while the contents of 4-hydroxycoumarin， geniposidic acid， gentiopicroside， and gardenoside methyl ester increase significantly. This change is presumed to be associated with the enhanced cooling and hemostatic effects of the processed products. The identified key components provide a basis for elucidating the material basis underlying the efficacy changes before and after carbonization.

OBJECTIVE To provide a scientific basis for the quality evaluation and clinical application of Qingwen hufei granules. METHODS Fourteen batches of Qingwen hufei granules were used as samples to establish high-performance liquid chromatography （HPLC） fingerprints using the Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine （2012 Edition）. The chromatographic peaks were identified and the similarity was evaluated. Cluster analysis （CA）， principal component analysis （PCA）， and orthogonal partial least squares-discriminant analysis （OPLS-DA） were used to conduct chemical pattern recognition analysis on the 14 batches of samples. Meanwhile， the contents of neochlorogenic acid （NGA）， chlorogenic acid （CHA）， cryptochlorogenic acid （CGA）， forsythoside A （FTA）， 3，5-O-dicaffeoylquinic acid （3，5-O- DA）， 4，5-O-dicaffeoylquinic acid （4，5-O-DA）， and angoroside C （AGC） in the samples were determined by HPLC. RESULTS The methodological investigation results of both the fingerprint and the content determination complied with the relevant requirements. Fourteen common peaks were indicated in the HPLC fingerprints of the 14 batches of samples， and 7 of them were identified [NGA （peak 2）， CHA （peak 3）， CGA （peak 5）， FTA （peak 11）， 3，5-O-DA （peak 12）， 4，5-O-DA （peak 13）， and AGC （peak 14）]； the similarity of each sample was greater than 0.94. The results of CA and PCA showed that the samples could be classified into 3 categories； the results of OPLS-DA indicated that peak 4 （unknown）， peak 11 （FTA）， peak 8 （unknown）， peak 9 （unknown）， and peak 1 （unknown） were the differential components. The content ranges of NGA， CHA， CGA， 3，5-O-DA， FTA， 4，5-O-DA and AGC in the 14 batches of samples were 0.210 4-0.458 7， 0.269 1-0.506 3， 0.228 1-0.461 1， 0.443 9-1.044 6， 0.066 7-0.155 7， 0.062 8-0.143 8， and 0.057 4-0.105 7 mg/g， respectively. CONCLUSIONS The HPLC fingerprint and multi-component content determination methods established in this study are efficient and reliable， and can be used for the quality evaluation of Qingwen hufei granules.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.

OBJECTIVE: To investigate the associations between eight serum per- and polyfluoroalkyl substances (PFASs) and regional fat depots, we analyzed the data from the National Health and Nutrition Examination Survey (NHANES) 2011-2018 cycles. METHODS: Multiple linear regression models were developed to explore the associations between serum PFAS concentrations and six fat compositions along with a fat distribution score created by summing the concentrations of the six fat compositions. The associations between structurally grouped PFASs and fat distribution were assessed, and a prediction model was developed to estimate the ability of PFAS exposure to predict obesity risk. RESULTS: Among females aged 39-59 years, trunk fat mass was positively associated with perfluorooctane sulfonate (PFOS). Higher concentrations of PFOS, perfluorohexane sulfonate (PFHxS), perfluorodecanoate (PFDeA), perfluorononanoate (PFNA), and n-perfluorooctanoate (n-PFOA) were linked to greater visceral adipose tissue in this group. In men, exposure to total perfluoroalkane sulfonates (PFSAs) and long-chain PFSAs was associated with reductions in abdominal fat, while higher abdominal fat in women aged 39-59 years was associated with short-chain PFSAs. The prediction model demonstrated high accuracy, with an area under the curve (AUC) of 0.9925 for predicting obesity risk. CONCLUSION PFAS exposure is associated with regional fat distribution, with varying effects based on age, sex, and PFAS structure. The findings highlight the potential role of PFAS exposure in influencing fat depots and obesity risk, with significant implications for public health. The prediction model provides a highly accurate tool for assessing obesity risk related to PFAS exposure.
Humans ; Fluorocarbons/blood* ; Female ; Adult ; Middle Aged ; Male ; Environmental Pollutants/blood* ; Abdominal Fat ; Nutrition Surveys ; Alkanesulfonic Acids/blood* ; Obesity ; Environmental Exposure

OBJECTIVE: We aimed to investigate the patterns of fasting blood glucose (FBG) trajectories and analyze the relationship between various occupational hazard factors and FBG trajectories in male steelworkers. METHODS: The study cohort included 3,728 workers who met the selection criteria for the Tanggang Occupational Cohort (TGOC) between 2017 and 2022. A group-based trajectory model was used to identify the FBG trajectories. Environmental risk scores (ERS) were constructed using regression coefficients from the occupational hazard model as weights. Univariate and multivariate logistic regression analyses were performed to explore the effects of occupational hazard factors using the ERS on FBG trajectories. RESULTS: FBG trajectories were categorized into three groups. An association was observed between high temperature, noise exposure, and FBG trajectory ( P < 0.05). Using the first quartile group of ERS1 as a reference, the fourth quartile group of ERS1 had an increased risk of medium and high FBG by 1.90 and 2.21 times, respectively (odds ratio [ OR] = 1.90, 95% confidence interval [ CI]: 1.17-3.10; OR = 2.21, 95% CI: 1.09-4.45). CONCLUSION An association was observed between occupational hazards based on ERS and FBG trajectories. The risk of FBG trajectory levels increase with an increase in ERS.
Humans ; Male ; Adult ; Blood Glucose/analysis* ; China ; Prospective Studies ; Occupational Exposure/adverse effects* ; Risk Factors ; Middle Aged ; Steel ; Fasting/blood* ; Metal Workers ; East Asian People

OBJECTIVE: CRISPR-Cas protects bacteria from exogenous DNA invasion and is associated with bacterial biofilm formation and pathogenicity. METHODS: We analyzed the type I-F CRISPR-Cas system of Legionella pneumophila WX48, including Cas1, Cas2-Cas3, Csy1, Csy2, Csy3, and Cas6f, along with downstream CRISPR arrays. We explored the effects of the CRISPR-Cas system on the in vitro growth, biofilm-forming ability, and pathogenicity of L. pneumophila through constructing gene deletion mutants. RESULTS: The type I-F CRISPR-Cas system did not affect the in vitro growth of wild-type or mutant strains. The biofilm formation and intracellular proliferation of the mutant strains were weaker than those of the wild type owing to the regulation of type IV pili and Dot/Icm type IV secretion systems. In particular, Cas6f deletion strongly inhibited these processes. CONCLUSION The type I-F CRISPR-Cas system may reduce biofilm formation and intracellular proliferation in L. pneumophila.
Legionella pneumophila/pathogenicity* ; CRISPR-Cas Systems ; Biofilms/growth & development* ; Phenotype ; Bacterial Proteins/metabolism* ; Gene Deletion

Ambient air pollution is increasingly being recognized as a risk factor for heart failure; however, its effects on cardiac biomarkers remain unclear. This scoping review assessed the existing evidence on the association between air pollution and cardiac biomarkers in heart failure, described the key concepts, synthesized data, and identified research gaps. Following the PRISMA-ScR guidelines, PubMed, Embase, Web of Science, and CNKI databases were searched for studies on air pollution, heart failure, and biomarkers. A total of 765 records were screened, and 81 full texts were assessed for eligibility, resulting in 15 studies. The results showed that the exposure to particulate matter was associated with elevated N-terminal pro-B-type natriuretic peptide and troponin levels. Several studies have linked particulate matter exposure to a higher cardiovascular risk and heart failure biomarkers. Inflammatory and oxidative stress markers were consistently elevated across studies, supporting the biological relevance of these associations. However, few studies have focused specifically on populations with heart failure or clinically relevant biomarkers, and the evidence for gaseous pollutants remains inconclusive. These findings highlight the need to integrate environmental risk assessment into heart failure care and inform policy efforts to reduce the pollution-related cardiovascular burden. Further research should address these gaps through improved exposure assessments and the integration of mechanistic evidence.
Heart Failure/epidemiology* ; Biomarkers/metabolism* ; Humans ; Air Pollution/adverse effects* ; Air Pollutants/adverse effects* ; Particulate Matter/adverse effects* ; Environmental Exposure ; Natriuretic Peptide, Brain/blood* ; Oxidative Stress ; Troponin/blood*

Forensic medicine has been designated as a first-level discipline,presenting new opportunities and challenges for the development of forensic medicine.Since the 1980s,the establishment of foren-sic medicine discipline and the cultivation of high-level forensic talents have become hot topics in the development of forensic medicine in China.Since the 13th Five-Year Plan,the forensic team of Shanxi Medical University has been aiming at the forefront,proposing the development goals of"Five First-class"and the discipline development path"Six Major Achievements".It has selected benchmark disci-plines,identified gaps in disciplinary development,unified thoughts,formulated completion timelines,concentrated superior resources,assigned tasks to individuals,and created an"Organized Fill-in-the-Blank Format"forensic medicine discipline construction model with the characteristics of the new era.The construction model of forensic medicine has achieved good results in the goals,discipline frame-work,scientific research,talent cultivation,discipline team and platform construction,forming a rela-tively complete discipline construction and management system,and accumulating valuable experience for the construction of first-level discipline and high-level talent cultivation of forensic medicine.

Objective To characterize the clinical features of the group of gout patients to facilitate earlier identifi-cation,and optimize the diagnosis and treatment of the condition.Methods The retrospective study analyzed 24 gout patients with shoulder joint(s)involved and consulted by physicians of Peking Union Medical College Hospital from March 2021 to April 2025,while 70 outpatient gout patients matched by clinical course duration and sex were enrolled as control group.Clinical data including medical history,laboratory tests,therapeutic interventions.Prog-nosis was systematically collected to delineate the distinctive clinical manifestations of the patients.Results All 24 gout patients with shoulder joints involved were male,aged(43.16±13.13)years and had an average BMI of 27.70±4.63.The duration of gout was 8(5,12)years while of those patients had an early onset before 30 years old.The maximal serum uric acid concentration was(754.15±175.79)μmol/L.It was shown by case review that 16.67％of the patients were asymptomatic,and 79.17％suffered from shoulder pain.A quarter of the patients developed subcutaneous tophi.All the patients affected(P＜0.05).The affected joints ascended from lower extremities to the upper averagely took 4.72±2.80 years and had heavier burden of hyperuricemia(P＜0.05),while no significant difference was found in renal function and inflammation level.Conclusions Gout patients with shoulder joints involvement are older and have atypical manifestation.The diagnosis needs support of imaging or ar-throcentesis.