Objective: To optimize the technology and process for recovering immune cells from discarded leukocyte filter through reverse flushing, and to investigate the effects of different reverse flushing solutions and physical conditions (temperature, soaking, and ultrasound) on the cell recovery rate. Additionally, to evaluate the feasibility and quality of isolating and culturing NK cells from the recovered cells. Methods: Normal saline, PBS, and PBS-EDTA were used as reverse flushing solutions to backwash the filter, and the white blood cell recovery rates were compared. The reverse flushing efficiency was optimized by adjusting the temperature of the reverse flushing solution, filter soaking treatment and ultrasonic treatment. The Ficoll separation method was employed to isolate peripheral blood mononuclear cells (PBMCs) from the elution solution and conduct in vitro expansion and culture. Lymphocyte subsets were identified and quantified using flow cytometry. Results: The physiological saline served as the backflush fluid was the most stable. The reverse temperature had a significant impact on the recovery rate of white blood cell subgroups. The recovery rates of lymphocytes and monocytes at 37℃ were significantly higher than those at 4℃ [(35.56±5.55)% vs (22.88±0.31)%, (32.42±4.82)% vs (8.00±1.6)%, t=5.581 and 5.758, respectively, both P<0.001)], and at 25℃ [(35.56±5.55)% vs (22.42±6.13)%, t=5.904, P<0.001; (32.4±4.82)% vs (21.11±1.23)%, t=2.629, P=0.030)]. The recovery rates of white blood cell subgroups after 37℃ immersion were higher than those after direct reverse flow at 37℃, but the difference was not statistically significant (P>0.05). The recovery rate of cells after ultrasonic immersion at 25℃ was further increased compared to that after immersion at 25℃, but the difference was not statistically significant (P>0.05). The purity of the NK cells obtained through sorting reached (94.2±4.5)%, and the viability was (94.8±0.9)%. After 15 days of culture, the cell count was expanded approximately 450 times, yielding more than 10 /mL highly active NK cells. Conclusion: By optimizing the backflushing process, immune cells can be efficiently recovered from discarded filters. The 37℃ backflow liquid has the best backflow effect; soaking and ultrasonic treatment can be used as auxiliary methods to improve recovery rates. The NK cells from this source have high purity, good activity, and strong expansion ability, and can be used as a reliable cell source for immunotherapy research, and in line with the circular economy concept of resource reuse.

Objective: To present the plotting of trend analysis charts and the application of multi-rule trend analysis method for monitoring the quality of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells. Methods: Samples of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells were collected in accordance with relevant protocols and requirements. The results of blood quality testing were compiled. The trend line charts were plotted for the deviation rates of volume, hemoglobin (Hb) content, supernatant protein content, and leukocyte residual count. In addition, the trend line chart were plotted for hematocrit and post-storage hemolysis rate. Results: The trend analysis rules for the deviation rate of volume from the standard were: 1 categorized as out-of-control, (3 of 4) as warning, R as warning, 8 as alert, and 12 as alert. For Hb content deviation rate, the rules were: <0% categorized as out-of-control; <20% but ≥0% (for whole blood) or <10% but ≥0% (for washed red blood cells and leukocyte-depleted suspended red blood cells) as a warning. For supernatant protein content deviation rate, the rules were: ≥0.0% as out-of-control, and >-10% but <0.0% as a warning. For hematocrit, the rules were: 1 as out-of-control and (3 of 4) as warning. For leukocyte residual count deviation rate, the rules were: >0.0% as out-of-control, and >-10% but ≤0.0% as a warning. For post-storage hemolysis rate, the rule was: ≥0.8% out-of-control. Conclusion: The application of multi-rule trend analysis facilitates the timely identification of trend abnormalities and factors causing deviations in the collection and preparation processes of whole blood, washed red blood cells, and leukocyte-depleted suspended red blood cells, thereby providing reliable numerical evidence for their correction and adjustment.

Objective To characterize the species composition and distribution patterns of ticks in 17 counties and cities of Yunnan Province, thereby furnishing fundamental data for the prediction, prevention, and control of local tick-borne diseases. Methods Tick specimens deposited in Yunnan Institute of Endemic Disease Control and Prevention (YIEDC) collected from 17 counties or cities during 1957-2024 were thoroughly trimmed and morphological identified based on diagnostic characters. Results A total of 2 923 tick specimens were taxonomically identified and classified into 18 species within 6 genera in the Ixodidae family. Specifically, the genus Haemaphysalis comprised 6 species with 154 specimens, the genus Rhipicephalus included 3 species with 2 444 specimens, the genus Ixodes consisted of 4 species with 236 specimens, the genus Amblyomma included 3 species with 49 specimens, the genus Dermacentor contained 1 species with 12 specimens, and the genus Hyalomma included 1 species with 28 specimens. A wide range of host animals were found, including livestock, wild avian species, wild mammalian species, reptiles (including pythons), and humans. Conclusions Ticks were found on a wide array of host animals within the 17 counties and cities of Yunnan Province, demonstrating high host species diversity. Our data suggest a need to strengthen the monitoring of tick-borne diseases and provide health education for the general population in Yunnan Province.

Electromagnetic fields can regulate the fundamental biological processes involved in bone remodeling. As a non-invasive physical therapy, electromagnetic fields with specific parameters have demonstrated therapeutic effects on bone remodeling diseases, such as fractures and osteoporosis. Electromagnetic fields can be generated by the movement of charged particles or induced by varying currents. Based on whether the strength and direction of the electric field change over time, electromagnetic fields can be classified into static and time-varying fields. The treatment of bone remodeling diseases with static magnetic fields primarily focuses on fractures, often using magnetic splints to immobilize the fracture site while studying the effects of static magnetic fields on bone healing. However, there has been relatively little research on the prevention and treatment of osteoporosis using static magnetic fields. Pulsed electromagnetic fields, a type of time-varying field, have been widely used in clinical studies for treating fractures, osteoporosis, and non-union. However, current clinical applications are limited to low-frequency, and research on the relationship between frequency and biological effects remains insufficient. We believe that different types of electromagnetic fields acting on bone can induce various “secondary physical quantities”, such as magnetism, force, electricity, acoustics, and thermal energy, which can stimulate bone cells either individually or simultaneously. Bone cells possess specific electromagnetic properties, and in a static magnetic field, the presence of a magnetic field gradient can exert a certain magnetism on the bone tissue, leading to observable effects. In a time-varying magnetic field, the charged particles within the bone experience varying Lorentz forces, causing vibrations and generating acoustic effects. Additionally, as the frequency of the time-varying field increases, induced currents or potentials can be generated within the bone, leading to electrical effects. When the frequency and power exceed a certain threshold, electromagnetic energy can be converted into thermal energy, producing thermal effects. In summary, external electromagnetic fields with different characteristics can generate multiple physical quantities within biological tissues, such as magnetic, electric, mechanical, acoustic, and thermal effects. These physical quantities may also interact and couple with each other, stimulating the biological tissues in a combined or composite manner, thereby producing biological effects. This understanding is key to elucidating the electromagnetic mechanisms of how electromagnetic fields influence biological tissues. In the study of electromagnetic fields for bone remodeling diseases, attention should be paid to the biological effects of bone remodeling under different electromagnetic wave characteristics. This includes exploring innovative electromagnetic source technologies applicable to bone remodeling, identifying safe and effective electromagnetic field parameters, and combining basic research with technological invention to develop scientifically grounded, advanced key technologies for innovative electromagnetic treatment devices targeting bone remodeling diseases. In conclusion, electromagnetic fields and multiple physical factors have the potential to prevent and treat bone remodeling diseases, and have significant application prospects.

ObjectiveThe controllability changes of structural brain network were explored based on the control and brain network theory in young smokers, this may reveal that the controllability indicators can serve as a powerful factor to predict the sleep status in young smokers. MethodsFifty young smokers and 51 healthy controls from Inner Mongolia University of Science and Technology were enrolled. Diffusion tensor imaging (DTI) was used to construct structural brain network based on fractional anisotropy (FA) weight matrix. According to the control and brain network theory, the average controllability and the modal controllability were calculated. Two-sample t-test was used to compare the differences between the groups and Pearson correlation analysis to examine the correlation between significant average controllability and modal controllability with Fagerström Test of Nicotine Dependence (FTND) in young smokers. The nodes with the controllability score in the top 10% were selected as the super-controllers. Finally, we used BP neural network to predict the Pittsburgh Sleep Quality Index (PSQI) in young smokers. ResultsThe average controllability of dorsolateral superior frontal gyrus, supplementary motor area, lenticular nucleus putamen, and lenticular nucleus pallidum, and the modal controllability of orbital inferior frontal gyrus, supplementary motor area, gyrus rectus, and posterior cingulate gyrus in the young smokers’ group, were all significantly different from those of the healthy controls group (P<0.05). The average controllability of the right supplementary motor area (SMA.R) in the young smokers group was positively correlated with FTND (r=0.393 0, P=0.004 8), while modal controllability was negatively correlated with FTND (r=-0.330 1, P=0.019 2). ConclusionThe controllability of structural brain network in young smokers is abnormal. which may serve as an indicator to predict sleep condition. It may provide the imaging evidence for evaluating the cognitive function impairment in young smokers.

The renin-angiotensin-aldosterone system (RAAS) is crucial for regulating blood pressure and maintaining fluid balance, while clock genes are essential for sustaining biological rhythms and regulating metabolism. There exists a complex interplay between RAAS and clock genes that may significantly contribute to the development of various cardiovascular and metabolic diseases. Although current literature has identified correlations between these two systems, the specific mechanisms of their interaction remain unclear. Moreover, the interaction patterns under different physiological and pathological conditions need further investigation. This review summarizes the synergistic roles of the RAAS and clock genes in cardiovascular diseases, explores their molecular mechanisms and pathophysiological connections, discusses the application of chronotherapy, and highlights potential future research directions, aiming to provide novel insights for the prevention and treatment of related diseases.
Humans ; Renin-Angiotensin System/genetics* ; Cardiovascular Diseases/genetics* ; CLOCK Proteins/physiology* ; Animals

This study investigated the mechanism of Chaishao Kaiyu Decoction in improving hippocampal neuroinflammation in depressed rats based on complement component 3(C3)/C3 receptor(C3aR). A total of 60 SD rats were randomly divided into a blank group, a model group, high, medium, and low dose groups of Chaishao Kaiyu Decoction, and a positive drug group, with 10 rats in each group. Except for the blank group, chronic unpredictable mild stress(CUMS) was used to construct depression models in other groups. Sucrose preference, open-field experiment, forced swimming, and water maze were used to detect the changes in depression-like behavior in each group. Enzyme-linked immunosorbent assay(ELISA) was used to detect the serum inflammatory factor level in rats, and hematoxylin-eosin(HE) staining and Nissl staining were employed to observe the pathological damage of hippocampal neurons. Golgi-Cox staining was used to observe the dendritic spine damage of hippocampal neurons, and immunofluorescence and Western blot were utilized to detect the expression of microglial marker Iba-1 and C3/C3aR protein in the hippocampus of rats. The behavioral results showed that compared with the model group, Chaishao Kaiyu Decoction could significantly strengthen the sugar water preference, increase the distance and number of voluntary activities, shorten the immobility time in forced swimming and the successful incubation period of positioning navigation, and prolong the stay time of space exploration in the target quadrant. ELISA results showed that the content of inflammatory factors in the hippocampus of depressed rats was significantly higher than that of the blank group, and the content of inflammatory factors decreased significantly after the intervention of Chaishao Kaiyu Decoction. In addition, Chaishao Kaiyu Decoction could relieve pathological damage such as cell swelling and loose arrangement of hippocampus tissue. In the Western blot experiment, the expression levels of C3 and C3aR proteins in the model group were higher than those in the blank group, while the expression of C3 and C3aR in Chaishao Kaiyu Decoction could be down-regulated. Immunofluorescence results showed that compared with the model group, the fluorescence intensity of microglia marker Iba-1 decreased significantly after the intervention of Chaishao Kaiyu Decoction and positive drugs. The antidepressant effect of Chaishao Kaiyu Decoction may be related to the down-regulation of C3/C3aR signaling pathway-related proteins, thus alleviating hippocampal inflammation.
Animals ; Hippocampus/metabolism* ; Rats, Sprague-Dawley ; Drugs, Chinese Herbal/administration & dosage* ; Rats ; Male ; Depression/metabolism* ; Complement C3/metabolism* ; Receptors, Complement/metabolism* ; Humans ; Neuroinflammatory Diseases/genetics*

The main active compound, 3,4-dihydroxyacetophenone(3,4-DHAP), in the leaves of Ilex pubescens var. glaber, exhibits various pharmacological activities, including vasodilation and heart protection. Currently, natural extraction and chemical synthesis are the primary methods for obtaining 3,4-DHAP, but both approaches have inherent challenges. To address these problems, this study explored the whole-cell bioconversion of 1-(4-hydroxyphenol)-ethanol to 3,4-DHAP using recombinant Escherichia coli, cultivated in a green, cost-effective medium at room temperature and atmospheric pressure. Firstly, this study successfully constructed recombinant E. coli S1, which contained only the HpaBC gene, and recombinant E. coli S3, which contained both the Hped and HpaBC genes. The ability of S1 and S3 to synthesize 3,4-DHAP from their respective substrates was then evaluated through whole-cell bioconversion. Based on these results, the effects of four factors, i.e., substrate concentration, IPTG concentration, induction temperature, and transformation temperature, on the whole-cell bioconversion yield of S3 were investigated using an orthogonal experiment. The results showed that the factors influenced the yield in the following order: transformation temperature > induction temperature > IPTG concentration > substrate concentration. The optimal conditions were found to be a transformation temperature of 35 ℃, IPTG concentration of 0.1 mmol·L~(-1), induction temperature of 25 ℃, and substrate concentration of 10 mmol·L~(-1). Finally, the effect of transformation time on the yield of 3,4-DHAP was further examined under the optimal conditions. The results indicated that as the transformation time increased, the yield of 3,4-DHAP steadily increased. The highest yield of 260 mg·L~(-1) with a productivity of 17% was achieved after 72 hours of transformation. In conclusion, this study successfully achieved the whole-cell bioconversion of 1-(4-hydroxyphenol)-ethanol to 3,4-DHAP using recombinant E. coli for the first time, laying the groundwork for further optimization and development of the biosynthesis of 3,4-DHAP.
Escherichia coli/genetics* ; Acetophenones/chemistry* ; Ethanol/chemistry* ; Drugs, Chinese Herbal/chemistry* ; Biotransformation

The phase changes and quantity-quality transfer of 17 batches of Ostreae Concha(Ostrea rivularis) during the raw material-calcined decoction pieces-standard decoction process were analyzed. The content of calcium carbonate(CaCO_3), the main component, was determined by chemical titration, and the extract yield and transfer rate were calculated. The CaCO_3 content in the raw material, calcined decoction pieces, and standard decoction was 94.39%-98.80%, 95.03%-99.22%, and 84.58%-90.47%, respectively. The process of raw material to calcined decoction pieces showed the yield range of 96.85% to 98.55% and the CaCO_3 transfer rate range of 96.92% to 99.27%. The process of calcined decoction pieces to standard decoction showed the extract yield range of 2.86% to 5.48% and the CaCO_3 transfer rate range of 2.59% to 5.13%. The results of X-ray fluorescence(XRF) assay showed that the raw material, calcined decoction pieces, and standard decoction mainly contained Ca, Na, Mg, Si, Br, Cl, Al, Fe, Cr, Mn, and K. The chemometric results showed an increase in the relative content of Cr, Fe, and Si from raw material to calcined decoction pieces and an increase in the relative content of Mg, Al, Br, K, Cl, and Na from calcined decoction pieces to standard decoction. X-ray diffraction(XRD) was employed to establish XRD characteristic patterns of the raw material, calcined decoction pieces, and standard decoction. The XRD results showed that the main phase of all three was calcite, and no transformation of crystalline form or generation of new phase was observed. Fourier transform infrared spectroscopy(FTIR) was employed to establish the FTIR characteristic spectra of the raw material, calcined decoction pieces, and standard decoction. The FTIR results showed that the raw material had internal vibrations of O-H, C-H, C=O, C-O, and CO■ groups. Due to the loss of organic matter components after calcination, no information about the vibrations of C-H, C=O, and C-O groups was observed in the spectra of calcined decoction pieces and standard decoction. In summary, this study elucidated the quantity-quality transfer and phase changes in the raw material-calcined decoction pieces-standard decoction process by determining the CaCO_3 content, calculating the extract yield and transfer rate, and comparing the element changes, FTIR characteristic spectra, and XRD characteristic pattern. The results were reasonable and reliable, laying a foundation for the subsequent process research and quality control of the formula granules of calcined Ostreae Concha(O. rivularis Gould), and providing ideas and methods for the quality control of the whole process of raw material-decoction pieces-standard decoction-formula granules of Ostreae Concha and other testacean traditional Chinese medicine.
Drugs, Chinese Herbal/isolation & purification* ; Calcium Carbonate/analysis* ; Quality Control

Guided by the concept of quality by design(QbD), this study optimizes the calcination and quenching process of calcined Magnetitum and establishes the XRD characteristic spectra of calcined Magnetitum, providing a scientific basis for the formulation of quality standards. Based on the processing methods and quality requirements of Magnetitum in the Chinese Pharmacopoeia, the critical process parameters(CPPs) identified were calcination temperature, calcination time, particle size, laying thickness, and the number of vinegar quenching cycles. The critical quality attributes(CQAs) included Fe mass fraction, Fe~(2+) dissolution, and surface color. The weight coefficients were determined by combining Analytic Hierarchy Process(AHP) and the criteria importance though intercrieria correlation(CRITIC) method, and the calcination process was optimized using orthogonal experimentation. Surface color was selected as a CQA, and based on the principle of color value, the surface color of calcined Magnetitum was objectively quantified. The vinegar quenching process was then optimized to determine the best processing conditions. X-ray diffraction(XRD) was used to establish the characteristic spectra of calcined Magnetitum, and methods such as similarity evaluation, cluster analysis, and orthogonal partial least squares-discriminant analysis(OPLS-DA) were used to evaluate the quality of the spectra. The optimized calcined Magnetitum preparation process was found to be calcination at 750 ℃ for 1 h, with a laying thickness of 4 cm, a particle size of 0.4-0.8 cm, and one vinegar quenching cycle(Magnetitum-vinegar ratio 10∶3), which was stable and feasible. The XRD characteristic spectra analysis method, featuring 9 common peaks as fingerprint information, was established. The average correlation coefficient ranged from 0.839 5-0.988 1, and the average angle cosine ranged from 0.914 4 to 0.995 6, indicating good similarity. Cluster analysis results showed that Magnetitum and calcined Magnetitum could be grouped together, with similar compositions. OPLS-DA discriminant analysis identified three key characteristic peaks, with Fe_2O_3 being the distinguishing component between the two. The final optimized processing method is stable and feasible, and the XRD characteristic spectra of calcined Magnetitum was initially established, providing a reference for subsequent quality control and the formulation of quality standards for calcined Magnetitum.
X-Ray Diffraction/methods* ; Drugs, Chinese Herbal/chemistry* ; Quality Control ; Particle Size