ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.

ObjectiveTo investigate the contamination status of ochratoxin A (OTA) in commercially available food products in Shanghai, and to assess OTA exposure levels and the associated non-carcinogenic and carcinogenic risks among pregnant women by integrating dietary consumption data of this population. MethodsThe levels of OTA contamination in 1 520 food samples collected in Shanghai from 2022 to 2023 were determined using liquid chromatography-tandem mass spectrometry. An exposure assessment model was developed based on the dietary consumption levels of pregnant women from the 2016‒2017 Shanghai Pregnant Women Dietary Monitoring Survey to calculate the estimated daily intake (EDI) of OTA, the margin of exposure for non-carcinogenic toxicity (MOE₁), and the margin of exposure for carcinogenic toxicity (MOE₂). An MOE₁ greater than 200 and an MOE₂ greater than 10 000 indicate that the non-carcinogenic toxicity and carcinogenic toxicity resulting from exposure are negligible, respectively. For samples with OTA contamination levels below the limit of detection (LOD), which accounted for more than 80% of the samples, the OTA levels were assigned values of 0 and LOD, respectively, for subsequent calculations. ResultsThe detection rates of OTA in cereals, nuts, dried fruits, and alcohol samples collected in 2022 were 2.03%, 0, 0, and 0, respectively. The OTA detection rates in cereals, nuts, dried fruits, beans, and alcohol samples collected in 2023 were 2.50%, 0.39%, 2.47%, 1.67%, and 13.33%, respectively. For pregnant women in Shanghai in 2022, simulation results indicated that when assigning a value of 0 and the LOD, theP₅₀ values of EDI for dietary OTA exposure were 0.05 and 0.72 ng·(kg·d)^-1, respectively, and the P₉₅ values of EDI for dietary OTA exposure were 0.25 and 2.40 ng·(kg·d)^-1, respectively. For pregnant women in Shanghai in 2023, the P₅₀ values of EDI for dietary OTA exposure were 0.04 and 1.00 ng·(kg·d)^-1, respectively, and the P₉₅ values of EDI for dietary OTA exposure were 0.23 and 2.67 ng·(kg·d)^-1, respectively, both substantially below the tolerable daily intake (TDI) for OTA [17 ng·(kg·d)^-1]. The EDI for dietary OTA exposure in 100.0% of Shanghai pregnant women was lower than the TDI, indicating an overall low level of dietary OTA exposure among this population. For 100.0% of pregnant women, the MOE₁ for dietary OTA exposure exceeded 200. When assigned a value of 0, the MOE₂ for 100.0% of pregnant women in both 2022 and 2023 exceeded10 000. When assigned the LOD value, 72.3% and 81.8% of pregnant women in 2022 and 2023, respectively, had an MOE₂ exceeding 10 000. ConclusionFrom 2022 to 2023, samples of cereals, nuts, dried fruits, beans, and alcohol sold in Shanghai exhibited varying degrees of OTA contamination. The overall EDI of OTA exposure among pregnant women in Shanghai remained at a low level. The non-carcinogenic and carcinogenic risks associated with OTA exposure were generally low and at controllable levels.

ObjectiveThis study aimed to investigate the anti-Mycoplasma pneumoniae (MP) activity of luteolin and elucidate its underlying mechanisms. MethodsLuteolin was identified as the primary active compound from the polyphenol extract ofF. diotrys using network pharmacology. Its efficacy was evaluated against two MP strains: the standard strain M129 and the multidrug-resistant strain M19. A modified culture medium with visual characteristics was employed to determine the minimum inhibitory concentration (MIC) of luteolin. The expression of key proteins involved in MP growth and pathogenicity was assessed by qRT-PCR following luteolin treatment. Additionally, the viability of A549 cells infected with MP was compared between luteolin-treated and untreated groups. In vivo anti-MP activity was evaluated using a mouse model, and the expression of inflammatory cytokines in lung tissues was analyzed. ResultsLuteolin effectively inhibited both MP strains, with MIC₉₀ values of 100 mg/L for M19 and M129. Treatment with luteolin significantly downregulated the expression of adhesion proteins P1 and P30 in both strains. However, the expression of P65, HMW3, TrmB, and CARDS TX was reduced only in the M19 strain following luteolin intervention. Luteolin also enhanced the growth and viability of A549 cells infected with MP. In the mouse model, luteolin treatment resulted in steady weight gain and was well tolerated. The bacteriostatic rate of luteolin in lung tissues was 50.7%, significantly higher than the 25.2% observed in the roxithromycin group. Furthermore, luteolin reduced the expression of inflammatory factors, including IL-6, TNF-α, and HMGB1, in MP-infected mice. ConclusionLuteolin effectively and safely inhibits the proliferation and pathogenicity of MP, particularly the drug-resistant M19 strain, by downregulating the expression of toxicity-associated proteins (P1, P30, P65, HMW3, TrmB, CARDS TX) and modulating host inflammatory responses. These findings suggest that luteolin may offer a novel therapeutic strategy for treating MP infections, especially those caused by drug-resistant strains.

Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

Organoid-on-a-chip technology represents a promising interdisciplinary advancement that merges two cutting-edge biomedical platforms: stem cell-derived organoids and microfluidics-based organ-on-a-chip systems. Organoids are self-organizing three-dimensional (3D) cell cultures that mimic the key structural and functional features of in vivo organs. However, traditional organoid culture systems are often static, lacking dynamic environmental cues and suffering from limitations such as batch-to-batch variability, low stability, and low throughput. Organ-on-a-chip platforms, by contrast, utilize microfluidic technologies to simulate the dynamic physiological microenvironment of human tissues and organs, enabling more controlled cell growth and differentiation. By integrating the advantages of organoids and organ-on-a-chip technologies, organoid-on-a-chip systems transcend the limitations of conventional 3D culture models, offering a more physiologically relevant and controllable in vitro platform. In organoid-on-a-chip systems, stem cells or pre-formed organoids are cultured in micro-engineered environments that mimic in vivo conditions, enabling precise control over fluid flow, mechanical forces, and biochemical cues. Specifically, these platforms employ advanced strategies including bio-inspired 3D scaffolds for structural support, precise spatial cell patterning via 3D bioprinting, and integrated biosensors for real-time monitoring of metabolic activities. These synergistic elements recreate complex extracellular matrix signals and ensure high structural fidelity. Based on structural complexity, organoid-on-a-chip systems are classified into single-organoid and multi-organoid types, forming a trajectory from unit biomimicry to systemic simulation. Single-organoid chips focus on highly biomimetic units by integrating vascular, immune, or neural functions. Multi-organoid chips simulate inter-organ crosstalk and systemic homeostasis, advancing complex disease modeling and PK/PD evaluation. This emerging technology has demonstrated broad application potential in multiple fields of biomedicine. Organoid-on-a-chip systems can recapitulate organ developmentin vitro, facilitating research in developmental biology. They mimic organ-specific physiological activities and mechanisms, showing promising applications in regenerative medicine for tissue repair or replacement. In disease modeling, they support the reconstruction of models for neurodegenerative, inflammatory, infectious, metabolic diseases, and cancers. These platforms also enable in vitro drug testing and pharmacokinetic studies (ADME). Patient-derived chips preserve genetic and pathological features, offering potential for precision medicine. Additionally, they reduce species differences in toxicology, providing human-relevant data for environmental, food, cosmetic, and drug safety assessments. Despite progress, organoid-on-a-chip systems face challenges in dynamic simulation, extracellular matrix (ECM) variability, and limited real-time 3D imaging, requiring improved materials and the integration of developmental signals. Current bottlenecks also include the high technical threshold for automation and the lack of standardized validation frameworks for regulatory adoption. Meanwhile, the concept of a “human-on-a-chip” has been proposed to mimic whole-body physiology by integrating multiple organoid modules. This approach enables systemic modeling of drug responses and toxicity, with the potential to reduce animal testing and revolutionize drug development. Future advancements in bio-responsive hydrogels and flexible biosensors will further empower these platforms to bridge the gap between bench-side research and personalized clinical interventions. In conclusion, organoid-on-a-chip technology offers a transformative in vitro model that closely recapitulates the complexity of human tissues and organ systems. It provides an unprecedented platform for advancing biomedical research, clinical translation, and pharmaceutical innovation. Continued development in biomaterials, microengineering, and analytical technologies will be essential to unlocking the full potential of this powerful tool.

Objective To explore the clinical values of non-invasive myocardial work (MW) and tissue motion annular displacement (TMAD) in evaluation of anthracycline therapy-related cardiac dysfunction in patients with non-Hodgkin lymphoma. Methods A total of 62 patients with non-Hodgkin lymphoma who received standardized chemotherapy based on doxorubicin. Two and three dimensional transthoracic echocardiography, along with two dimensional speckle tracking echocardiography, were performed one day before chemotherapy and at 3, 6, and 9 months after chemotherapy to assess left ventricular ejection fraction, global longitudinal strain (GLS), MW parameters, and TMAD. Logistic regression analysis was used to evaluate the risk factors for cancer therapy-related cardiac dysfunction (CTRCD). The receiver operating characteristic curve was used to assess the diagnostic values of MW- and TMAD-related parameters for CTRCD. Results Compared to baseline, GLS, global work index (GWI), global constructive work (GCW), global work efficiency (GWE), TMAD at midpoint (TMADmid), and TMADmid percentage of left ventricular long-axis diameter (TMADmid%) decreased at 3 months after chemotherapy, while global wasted work (GWW) increased at 6 months after chemotherapy (P＜0.05). Logistic regression analysis showed that the relative reduction in GLS and TMADmid% at 3 months after chemotherapy were independent predictors for CTRCD （P＜0.05), while MW parameters were not independent predictors for CTRCD. GLS reduction≥10.3% and TMADmid% reduction≥15.8% at 3 months after chemotherapy predicted CTRCD with 0.866 and 0.824 of area under the curve (AUC), 92% and 75% of sensitivity, and 74% and 80% of specificity, respectively. AUC of combination of two indexes improved to 0.905, with 75% of sensitivity and 90% of specificity. Conclusions In non-Hodgkin lymphoma patients, the combination of GLS and TMADmid% is helpful of predicting CTRCD early, TMAD may be a novel diagnostic index for CTRCD, and GLS has superior predictive performance than MW for CTRCD.

This paper systematically reviews the current status of integrated traditional Chinese and western medicine in the treatment of Helicobacter pylori （Hp） infection， as well as recent progress in clinical and basic research both in China and internationally. It summarizes the advantages of traditional Chinese medicine （TCM） in Hp infection management， including improving Hp eradication rates， enhancing antibiotic sensitivity， reducing antimicrobial resistance， decreasing drug-related adverse effects， and ameliorating gastric mucosal lesions. These advantages are particularly evident in patients who are intolerant to bismuth-containing regimens， those with refractory Hp infection， and individuals with precancerous gastric lesions. An integrated， whole-process management approach and individualized， staged comprehensive treatment strategies combining TCM and western medicine are proposed for Hp infection. Future prevention and control of Hp infection should adopt an integrative Chinese-western medical strategy， emphasizing prevention， strengthening primary care， implementing proactive long-term monitoring， optimizing screening strategies， and advancing the development of novel technologies and mechanistic studies of Chinese herbal interventions. These efforts aim to provide a theoretical basis and practical pathways for the establishment and improvement of Hp infection prevention and control systems.

Nichrome(NiCr)wire with strong mechanical properties,excellent flexibility,good corrosion resistance and high thermal stability was selected as a promising fiber substrate to replace the fragile fused-silica counterpart.The NiCr layered double hydroxide nanosheets(NiCr LDHs NSs)were in-situ grown on the NiCr fiber substrate.Then,the extraction performance of the NiCr@NiCr LDHs NSs fiber was evaluated using four kinds of chlorophenol(CPs)as model compounds combined with high performance liquid chromatography-ultraviolet detection(HPLC-UV).The results showed that the assembled fibers exhibited superior extraction selectivity and enhanced extraction efficiency for CPs in comparison to commercial PA,PDMS,and PDMS/DVB fibers.Under the optimized experimental conditions,the established method showed good linearity in the range of 0.2-200 μg/L,with coefficient of determination(R2)>0.9989.The limits of detection(LODs)and limits of quantification(LOQs)were 0.050-0.157 μg/L and 0.165-0.502 μg/L,respectively.Relative standard deviations(RSDs)for intra-day and inter-day analyses ranged from 2.85%to 4.05%and from 3.16%to 4.96%,respectively.The developed method with the constructed fiber was applied to preconcentration and detection of different types of CPs in real water samples,showing satisfactory recoveries ranging from 80.0%to 106.9%,with RSDs of 3.12%-7.81%.Moreover,the NiCr@NiCr LDHs NSs fiber could maintain good extraction performance even after 240 extraction-desorption cycles.

Sarin(GB)is a typical representative of nerve agents with high toxicity,and very low amount can cause death.GB can cause water and atmospheric environment poisoning,so the detection of GB in water and air is of great significance.In this work,a colorimetric sensor array(CSA)based on GB inhibition of cholinesterase activity was constructed to detect GB with high selectivity.A 4×4 colorimetric array was constructed using acetylcholinesterase(AChE),butyryl cholinesterase(BuChE)and the corresponding substrate acetylthiocholine iodide(S-ACh),butyryl thiocholine iodide(S-BCh),acetylcholine chloride(ACh),butyryl choline chloride(BCh)and 2,6-dichloroindophenol ethyl ester(DCIE).The linear curve of the sensor was Y=131.3×lgC+271.6(R2=0.997),where Y was the array response Euclidean distance,C was the concentration of GB(mg/L),the linear range was 0.03?0.32 mg/L,and the detection limit was 27.6 μg/L.The method could effectively distinguish chemical warfare agents(CWA)such as VX,Soman(GD),mustard gas(HD),Louie reagent(L),and had high anti-interference ability,sensitivity and good repeatability.It was successfully applied to the detection of GB in simulated water and simulated air samples,and the sample recovery rate was 97.2% ?100.9%.This method would be potentially applied to the field rapid detection of nerve agents.

At present,the drug substitutes represented by new psychoactive substances are gradually be-coming popular,leading to an increasing demand for identifying novel drugs with unknown structures in drug investigation.Nuclear magnetic resonance(NMR)spectroscopy is an important tool for ana-lyzing molecular structures.In the absence of standard substances,quantitative NMR(qNMR)can un-dertake the quantitative analysis of target substances in complex mixtures and has unique advantages in the research of new drugs and their precursor drugs.Due to the limitations of the site and mainte-nance costs,as well as relatively complex operation,high-field superconducting NMR is less com-monly applied in drug research.The desktop low-field NMR developed in recent years provides a new alternative solution.Due to the use of permanent magnets,its size is reduced,and the operation and maintenance costs are lowered.It has been widely used in various research fields.This article reviews the development of low-field NMR technology,summarizes the application of desktop low-field NMR in screening and identification of suspicious substances,rapid content determination,analysis of drug manufacturing processes and synthetic routes,and correlation traceability.It also looks forward to the prospects and development directions of this technology in drug research,aiming to provide a reference for researchers who work in analytical chemistry and drug research.