Objective: To investigate the correlation between color parameters (L^*, a^*, b^*, Eab^*) and the contents of reducing sugars, total polysaccharides, total oligosaccharides, as well as four saccharides (fructose, glucose, sucrose, and kestose) during the nine cycles of steaming and sun-drying processing of Polygonatum kingianum, and to preliminarily explore the optimal processing duration.
Methods: The color changes were objectively evaluated using a colorimeter. The anthrone-sulfuric acid method was employed to determine total polysaccharides and oligosaccharides. The 3,5-dinitrosalicylic acid (DNS) colorimetric method was used to measure total reducing sugar content. High-performance liquid chromatography coupled with charged aerosol detection (HPLC-CAD) was applied for quantitative analysis of fructose, glucose, sucrose, and kestose. Multivariate statistical analysis was conducted to assess samples from different processing stages.
Results: Significant variations in color and component contents were observed across processing stages. The herbal pieces progressively darkened with increased processing cycles: brightness (L^*) and total color difference (Eab^*) initially decreased then stabilized, while a^* (red-green) and b^* (yellow-blue) values first increased then declined. Total polysaccharides and oligosaccharides showed overall decreasing trends, whereas reducing sugars initially increased before stabilizing. Fructose and glucose levels rose continuously, while sucrose and kestose decreased progressively, becoming undetectable after five cycles.
Conclusion: The chromatic alteration and saccharide composition of P. kingianum showed significant correlation with processing duration. Both total color difference (Eab^*) and reducing sugar content stabilized after four processing cycles (12 hours), suggesting that four cycles of steaming and sun-drying may represent the optimal processing duration.

Objective: To investigate the correlation between the color parameters (L^*, a^*, b^*, Eab^* values) of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques and the contents of 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucopyranoside, emodin, physcion, emodin-8-O-β-D-glucopyranoside, physcion-8-O-β-D-glucopyranoside.
Methods: The L^*, a^*, b^* and Eab^* values of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques were determined by spectrophotometer, and the contents of the five components were determined by high performance liquid chromatography. Secondly, SPSS 26.0 software and Simca 14.1 software were used to analyze the correlation.
Results: Through the hierarchical cluster analysis (HCA), it was found that the steamed samples and black bean steamed samples could be obviously divided into two categories: raw products and processed products. The processed products could be further divided into 2-8 h and 12-48 h. Pearson correlation analysis showed that the content of stilbene glycoside was significantly positively correlated with L^*, a^* and b^* values (P<0.01). The a^* value was significantly positively correlated with the content of emodin and physcion (P<0.01). Emodin-8-O-β-D-glucoside was positively correlated with L^* value and b^* value, while physcion-8-O-β-D-glucoside was negatively correlated with a^* value. Partial least squares discriminant analysis (PLS) showed that 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucoside (VIP=1.69) and emodin-8-O-β-D-glucoside (VIP=1.06) were the key variables affecting chromaticity characteristics (P<0.01).
Conclusion: The three processes of steaming, black bean steaming and black bean stewing are consistent in composition transformation and chromaticity variation, and stilbene glycoside can be used as a specific index component to characterize the processed color. Chromatic parameters can effectively reflect the processing progression and serve as quality monitoring indicators during production.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

Objective This study reports on the obligatory parasitism of water mites Arrenurus sp. on Anopheles messeae at the Manzhouli Port, Inner Mongolia, China. Methods Duing July 2024, a survey on the mosquito diversity was conducted at the Manzhouli Port. Captured mosquitoes and their ectoparasites were identified to species level. Results A total of 1840 adult mosquitoes were collected, representing species from three genera: Culex(Cx. modestus, Cx. pipiens pallens), Aedes(Ae. dorsalis, Ae. flavidorsalis, Ae. flavescens), and Anopheles (An. messeae). Among all the mosqutioes specimens,3 out of 150 captured An. messeae were found to carry ectoparasitic mites, with number of 2,4,27 mites separately. Morphological and molecular identification reached the same result as water mites(Hydrachnidiae, Hydracrina). COI gene sequence showed 94% similarity with the closest species Arrenurus truncatellus. Conlusions Literature review suggests water mites are host-specific parasitism of mosquito species and herein with the first record of Arrenurus sp. parasiting on An. Messeae in the most high-latitude region globally.

[This corrects the article DOI: 10.1016/j.apsb.2021.10.012.].

Enamel demineralization, the formation of white spot lesions, is a common issue in clinical orthodontic treatment. The appearance of white spot lesions not only affects the texture and health of dental hard tissues but also impacts the health and aesthetics of teeth after orthodontic treatment. The prevention, diagnosis, and treatment of white spot lesions that occur throughout the orthodontic treatment process involve multiple dental specialties. This expert consensus will focus on providing guiding opinions on the management and prevention of white spot lesions during orthodontic treatment, advocating for proactive prevention, early detection, timely treatment, scientific follow-up, and multidisciplinary management of white spot lesions throughout the orthodontic process, thereby maintaining the dental health of patients during orthodontic treatment.
Humans ; Consensus ; Dental Caries/etiology* ; Dental Enamel/pathology* ; Tooth Demineralization/etiology* ; Tooth Remineralization

Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

OBJECTIVE: To compare the efficacy of percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar fractures. METHODS: A retrospective case-control study was used to analyze the clinical data of 78 patients with osteoporotic thoracic and lumbar fractures admitted from October 2017 to May 2019. According to the surgical method, it was divided into percutaneous pedicle screw combined with unilateral nail placement combined with unilateral bone cement strengthening group(bone cement group) and percutaneous pedicle screw combined with bilateral nail placement(screw group). In the bone cement group, 40 patients included 16 males and 24 females, with a mean age of (62.1±8.1) years old. In the screw group, 38 patients included 18 males and 20 females with a mean age of (65.1±9.3) years old. The operation time, intraoperative blood loss, length of hospital stay and postoperative complications were compared between two groups. The kyphosis Cobb angle, anterior edge height ratio, central height ratio and pain visual analogue score(VAS) were compared. RESULTS: All patients were followed up for 25 to 36 months. The operation time (70.1±17.3) min of the cement group was shorter than that of the screw group (78.6±18.2) min(P<0.05). There were no significant differences in intraoperative blood loss and length of hospital stay(P>0.05). The VAS in the cement group 1 year 1.5±0.5 and the latest follow-up 0.5±0.3 after operation were lower than 1 year 1.8±0.3 and the latest follow-up 0.8±0.4 in the screw group(P<0.05). The kyphosis Cobb angle, anterior edge height ratio, central height ratio in bone cement group, 1 year (6.2±1.2)°, (86.6±3.5)%, (91.1±2.5)%, the last follow-up (6.4±0.7)°, (85.5±3.3)%, (90.5±6.3)% were better than that of the screw group 1 year (6.8±1.4)°, (83.1±2.4)%, (89.9±3.4)% and the latest follow-up (7.1±1.1)°, (82.6±4.1)%, (87.6±5.9)%(P<0.05). There were 3 cases of bone cement leakage in the cement group, all of which had no clinical symptoms;and 2 cases of pedicle screws were extracted in the screw group, and the screws were removed at the last follow-up. CONCLUSION Percutaneous pedicle screw combined with unilateral nail placement combined with bone cement strengthening and bilateral nail placement in the treatment of osteoporotic thoracic and lumbar compression fractures in the elderly can achieve satisfactory efficacy and effectively relieve the pain of patients, but the former internal fixation system is more stable, and the long-term follow-up can effectively maintain the height of the anterior middle column and the correction of kyphosis deformity, and the incidence of chronic low back pain is lower.
Humans ; Male ; Female ; Aged ; Bone Cements ; Middle Aged ; Thoracic Vertebrae/surgery* ; Lumbar Vertebrae/surgery* ; Retrospective Studies ; Spinal Fractures/surgery* ; Osteoporotic Fractures/surgery* ; Case-Control Studies ; Bone Nails ; Pedicle Screws

OBJECTIVE: To determine risk factors for cutout failure in geriatric intertrochanteric fracture patients after cephalomedullary nail fixation. METHODS: A retrospective review of 518 elderly patients who underwent cephalomedullary nail fixation for intertrochanteric fractures between January 2008 and August 2018 was conducted, including 167 males and 351 females, age from 65 to 97 years old. All patients were followed up for at least one year after surgery and divided into a healed group and a cutout group based on whether the hip screw cutout occurred. Among all patients, 10 cases experienced hip screw cutout. The general information, surgical data, and radiological data of the two groups were compared, and risk factors influencing hip screw cutout were analyzed. Propensity score matching was then performed on the cutout group based on gender, age, body mass index(BMI), and American Society of Anesthesiologists(ASA), and 40 patients from the healed group were matched at a ratio of 1∶4. Key risk factors affecting hip screw cutout were further analyzed. Multivariable logistic regression analysis was conducted to evaluate associations between variables and cutout failure. RESULTS: There were no statistically significant differences between the healed group and the cutout group in terms of age, gender, BMI, ASA, and AO classification. However, statistically significant differences were observed between the two groups in terms of reduction quality(P=0.003) and tip-apex distance(TAD), P<0.001. Multivariate analysis identified poor reduction quality OR=23.138, 95%CI(2.163, 247.551), P=0.009 and TAD≥25 mm OR=30.538, 95%CI(2.935, 317.770), P=0.004 as independent risk factors for cutout failure. CONCLUSION The present study identified poor reduction quality and TAD≥25 mm as factors for cutout failure in geriatric intertrochanteric fractures treated with cephalomedullary nails. Further studies are needed to calculate the optimal TAD for cephalomedullary nails.
Humans ; Male ; Female ; Hip Fractures/surgery* ; Aged, 80 and over ; Aged ; Risk Factors ; Retrospective Studies ; Fracture Fixation, Intramedullary/adverse effects* ; Bone Nails ; Bone Screws

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome