Objective To investigate the regulatory mechanism of transforming growth factor-β1 (TGF-β1) in different types of mitral valvular disease (MVD) with atrial fibrillation (AF). Methods From August 2011 to August 2012, patients with moderate to severe MVD accompanied by AF who required mitral valve replacement at the Department of Cardiovascular Surgery, West China Hospital, Sichuan University, were included. Based on echocardiographic results, patients were divided into two groups: a mitral regurgitation (MR) with AF (MR-AF) group and a mitral stenosis (MS) with AF (MS-AF) group. Left atrial tissue samples were collected during surgery. Techniques such as enzyme-linked immunosorbent assay, real-time fluorescence quantitative polymerase chain reaction, immunohistochemistry, and Western blotting were used to detect key molecules in the TGF-β1/JNK pathway. Results Sixteen patients were enrolled. There were 8 patients in the MR-AF group, including 5 males and 3 females, with an average age of (41.38±11.19) years; and 8 patients in the MS-AF group, including 6 males and 2 females, with an average age of (43.12±5.30) years. The left atrial volume load was higher in MR-AF patients, while the left atrial pressure load was higher in MS-AF patients. In MS-AF patients, the relative expression levels of MAPK9, JUN, CASP3, BAX, and BCL2 mRNA in left atrial tissues were significantly upregulated. The serum TGF-β1 protein level and the relative expression levels of p-JNK, p-c-Jun, and Caspase-3 proteins in the left atrial tissues of the MR-AF group were higher. Myocardial cell damage was more severe in the MS-AF group, and the protein expression level of Bcl-2 was higher. Conclusion Different MVD have distinct hemodynamic characteristics. The myocardium of the left atrium in MR-AF patients is more prone to apoptosis, possibly through the activation of the TGF-β1/JNK signaling pathway.

Methods: Six finite element models of T12 burst fractures were developed to simulate short-segment stabilization under normal or osteoporotic bone conditions, with/without augmentation screws at the fractured vertebra. Spinal stiffness, implant stresses, and axial displacement/micromotion of the bony defect were measured and compared under mechanical loading. Results: Osteoporotic models exhibited a greater range of motion (ROM) than normal bone. All six-screw constructs reduced ROM across all motions compared with traditional four-screw models. Osteoporotic fracture models gained greater benefit from intermediate screw augmentation at the fracture vertebra, which also lowered axial displacement/micromotion. In six-screw models, rod stress increased while pedicle screw stress decreased. Intermediate screws at fractured vertebrae produced similar changes in stress distribution across all fixation models, regardless of bone quality. Conclusions Our findings may facilitate implant selection for osteoporotic burst fractures, supporting the use of more rigid fixation sixscrew constructs to reduce the risk of mechanical failure and postoperative re-collapse.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

With the rapid development of the biopharmaceutical field, the efficient and simultaneous extraction of multiple biological components from biological samples has become a critical process for advancing scientific research. The ability to simultaneously extract various molecular components such as metabolites, DNA, RNA, and proteins is pivotal for multi-omics studies, which aim to comprehensively understand the molecular mechanisms of biological systems. Traditional methods often extract these components separately, leading to challenges such as sample loss, time consumption, contamination, and inconsistencies across different data types. In contrast, simultaneous extraction techniques address these issues by maintaining the consistency of each biological component’s physiological state, improving data reliability and facilitating integration across omic platforms. This review systematically summarizes recent advances in simultaneous extraction technologies, focusing on methods such as methanol/chloroform extraction, TRIzol reagent extraction, and modified Folch extraction, which have shown significant promise in improving the efficiency and integrity of biological sample preparation. These methods offer various advantages, such as reduced sample volume requirements, decreased contamination risk, and enhanced extraction consistency, which are crucial for studies involving small sample sizes or precious clinical specimens. Among these, methanol/chloroform extraction stands out for its simplicity, low cost, and ability to extract a wide range of biological molecules. However, it does face limitations, such as its inefficiency in extracting lipids and potential RNA contamination. On the other hand, the TRIzol reagent method has become a widely adopted technique due to its ability to simultaneously isolate RNA, proteins, and metabolites from the same sample. Despite its effectiveness, the TRIzol method has limitations in RNA quality, especially when handling complex samples or those with high protein content. Modified Folch extraction, which combines liquid-liquid extraction with commercial kits, offers a highly efficient way to extract polar metabolites, lipids, RNA, DNA, and proteins from small tissue samples. This method has proven advantageous in terms of extraction yield, especially for challenging or rare samples, although it requires precise handling to avoid cross-contamination between phases. The integration of automated platforms, microfluidics, and high-throughput systems is another exciting avenue for improving simultaneous extraction. Automation facilitates large-scale, reproducible sample processing with minimal human error, while microfluidics provides high precision in sample handling and enables real-time monitoring of extraction efficiency. These innovations not only enhance the speed and reproducibility of sample preparation but also open new possibilities for single-cell analysis, where sample volumes are often limited, and extraction efficiency is critical. In addition to the technical aspects, the review also highlights the importance of optimizing extraction protocols for specific sample types, such as clinical tissues, plants, and microorganisms. For example, the challenge of extracting multiple components from cancer tissues, where sample degradation and contamination risks are high, can be mitigated by carefully selecting extraction reagents and minimizing sample handling steps. Similarly, in plant studies, where metabolite diversity is vast, the simultaneous extraction methods must be optimized to account for the unique composition of plant tissues, which often include complex secondary metabolites and cell wall components. Looking forward, the development of more efficient and standardized simultaneous extraction methods will be crucial for advancing multi-omics research. There is a growing need for protocols that can be tailored to specific research needs, ensuring both reproducibility and flexibility in diverse applications. Additionally, combining these extraction methods with high-resolution analytical techniques such as mass spectrometry and next-generation sequencing will further enhance the potential of multi-omics studies to provide comprehensive insights into biological systems. As these technologies continue to evolve, their application in personalized medicine, environmental research, and agriculture holds great promise for addressing critical scientific challenges. In conclusion, while simultaneous extraction technologies have made significant strides, several challenges remain in optimizing extraction efficiency, ensuring reproducibility, and reducing costs. Future research should focus on refining extraction protocols, developing innovative extraction reagents, and expanding the scope of these methods to cater to a broader range of biological samples. Ultimately, the continued integration of these advanced techniques will revolutionize the way biological samples are prepared, analyzed, and understood in the context of multi-omics research.

Objective To gain insights into the biological characteristics of different populations of Culex tritaeniorhynchus within and around the Yellow Sea wetland from the perspective of the occurrence of resistance, we investigated the levels of resistance to deltamethrin and kdr gene mutation in the wetland and its peripheral areas. Methods Specimens were collected from Cx. tritaeniorhynchus populations at two monitoring sites in the Rare Bird National Nature Reserve and Tiaozi Ni Wetland Scenic Area, and also from two populations in Yancheng City and the Liuhe District of Nanjing, and the resistance of these mosquitoes to deltamethrin was determined using the CDC biotest bottle method. For each concentration of deltamethrin assessed, a random subset of exposed specimens was selected for amplification of the kdr gene fragment, followed by Sanger sequencing to identify and analyze resistance-associated mutations. Results The LC50 levels of deltamethrin among mosquitoes from the four populations in Luhe, Yancheng, the Rare Bird National Nature Reserve and the Tiaozi Ni Wetland Scenic Area were 2.048 5, 7.798 2, 3.473 3, and 17.695 5 mg/mL, respectively, with corresponding concentrations of deltamethrin ranging from 0.005 to 5.000,0.050 to 50.000,0.050 to 25.000 and 0.050 to 50.000 mg/mL, respectively. Furthermore, the ranges of the KT50 values were 11.76-107.43, 67.05-216.30,29.77-107.43 and 28.40-329.51 min; the 1-h knockdown rates were 34.58%-99.15%, 9.52%-43.80%, 55.09%-73.01%, and 10.09%-68.07%; and the 24-h mortality rates were 12.15%-67.52%,9.52%-79.56%,13.17%-82.21%, and 11.01%-78.99%, respectively. With respect to kdr gene mutation, we assayed a total of 63,70,59, and 57 mosquitoes for the four populations, for which we detected L1014F mutation frequencies of 14.29%, 35.00%, 20.34%, and 31.58%, respectively, with a majority of these mutations being heterozygous for resistance. In addition, five adult mosquitoes were identified has having synonymous mutations at site 1011[i. e. , AAT(asparagine)mutation to AAC(asparagine)]. Conclusions Our findings revealed the clear resistance of Cx. tritaeniorhynchus to deltamethrin in the Yancheng region of the Yellow Sea wetland, and the resistance phenotype and kdr frequency of Cx. tritaeniorhynchus in the wetland environment were comparable to those of Cx. tritaeniorhynchus in the wetland environment, thereby indicating that the resistance of different populations of Cx. tritaeniorhynchus was homogeneous under the pressure of different insecticide selection within and around the wetland. However, the underlying mechanisms need to be further studied.

ObjectiveJunctophilin-2 (JPH2) is an essential structural protein that maintains junctional membrane complexes (JMCs) in cardiomyocytes by tethering the plasma membrane to the sarcoplasmic reticulum, thereby facilitating excitation-contraction (E-C) coupling. Mutations in JPH2 have been associated with hypertrophic cardiomyopathy (HCM), but the molecular mechanisms governing its membrane-binding properties and the functional relevance of its membrane occupation and recognition nexus (MORN) repeat motifs remain incompletely understood. This study aimed to elucidate the structural basis of JPH2 membrane association and its implications for HCM pathogenesis. MethodsA recombinant N-terminal fragment of mouse JPH2 (residues1-440), encompassing the MORN repeats and an adjacent helical region, was purified under near-physiological buffer conditions.X-ray crystallography was employed to determine the structure of the JPH2 MORN-Helix domain. Sequence conservation analysis across species and junctophilin isoforms was performed to assess the evolutionary conservation of key structural features. Functional membrane-binding assays were conducted using liposome co-sedimentation and cell-based localization studies in COS7 and HeLa cells. In addition, site-directed mutagenesis targeting positively charged residues and known HCM-associated mutations, including R347C, was used to evaluate their effects on membrane interaction and subcellular localization. ResultsThe crystal structure of the mouse JPH2 MORN-Helix domain was resolved at 2.6 Å, revealing a compact, elongated architecture consisting of multiple tandem MORN motifs arranged in a curved configuration, forming a continuous hydrophobic core stabilized by alternating aromatic residues. A C-terminal α-helix further reinforced structural integrity. Conservation analysis identified the inner groove of the MORN array as a highly conserved surface, suggesting its role as a protein-binding interface. A flexible linker segment enriched in positively charged residues, located adjacent to the MORN motifs, was found to mediate direct electrostatic interactions with negatively charged phospholipid membranes. Functional assays demonstrated that mutation of these basic residues impaired membrane association, while the HCM-linked R347C mutation completely abolished membrane localization in cellular assays, despite preserving the overall MORN-Helix fold in structural modeling. ConclusionThis study provides structural insight into the membrane-binding mechanism of the cardiomyocyte-specific protein JPH2, highlighting the dual roles of its MORN-Helix domain in membrane anchoring and protein interactions. The findings clarify the structural basis for membrane targeting via a positively charged linker and demonstrate that disruption of this interaction—such as that caused by the R347C mutation—likely contributes to HCM pathogenesis. These results not only enhance current understanding of JPH2 function in cardiac E-C coupling but also offer a structural framework for future investigations into the assembly and regulation of JMCs in both physiological and disease contexts.

Objective To analyze the effect of Hsa-circ-0101216 on gemcitabine(GEM)chemotherapy resistance in pancreatic cancer and its mechanism.Methods Differentially expressed circRNAs between GEM-resistant pancreatic cancer cells and parent cells were screened using the GEO database.Pancreatic cancer GEM resistant cell lines(BxPC-3-GEM and Capan-1-GEM)were constructed by intermittent concentration gradient method.qRT-PCR was used to detect the expression of Hsa-circ-0101216 in cells.GEM resistant pancreatic cancer cell lines were taken and divided into sh-circ-0101216 group(knockdown of circ-0101216),sh-NC group(transfected with sh-NC),and blank control group(untreated).CCK-8 assay and EdU proliferation assay were used to detect the half inhibitory concentration(IC50)of GEM and proliferation ability of cells in each group.Western blotting was performed to detect the expression of multidrug resistance-related protein 1(MRP1),breast cancer resistance protein(BCRP),and human equilibrative nucleoside transporter-1(hENT-1).A subcutaneous xenograft tumor model of human pancreatic cancer in nude mice was constructed,and sh-NC+GEM group and sh-circ-0101216+GEM group(n=6)were set up.The volume and weight of xenograft tumor in nude mice were compared between the two groups.Western blotting and immunohistochemistry were used to detect the expression of MRP1,BCRP,and hENT-1 proteins in xenograft tumor tissues,and EDU proliferation assay was used to detect the proliferation ability of tumor cells.Results The GEO database screening showed that Hsa-circ-0101216 was up-regulated in GEM-resistant pancreatic cancer cell lines.Pancreatic cancer GEM-resistant cell lines were successfully constructed,and the expression levels of Hsa-circ-0101216 and the IC50 value in GEM-resistant pancreatic cancer cells BxPC-3-GEM and Capan-1-GEM were significantly higher than those in parental cells(P<0.05).In sh-circ-0101216 group,the IC50 values of GEM,cell viability,EdU positivity rate,and the expression levels of MRP1 and BCRP proteins in GEM-resistant pancreatic cancer cells BxPC-3-GEM and Capan-1-GEM were significantly lower than those in blank control group and sh-NC group,while the expression level of hENT-1 protein was significantly higher(P<0.05 or P<0.001).In sh-circ-0101216+GEM group,the weight and volume of subcutaneous xenograft tumors in nude mice,the expression levels and positive expression rates of MRP1 and BCRP proteins in tumor tissues,and the EdU positive rate were significantly lower than those in sh-NC+GEM group,while the expression level and positive expression rate of hENT-1 protein were significantly higher(P<0.05).Conclusions Hsa-circ-0101216 is highly expressed in GEM-resistant pancreatic cancer cell lines.Its knockdown can inhibit the proliferation of pancreatic cancer cells and enhance the chemosensitivity of pancreatic cancer cells to GEM.The mechanism may be related to the regulation of transmembrane transporter protein expression.

BackgroundSevere mental disorders are characterized by high recurrence rate， high disability rate， high rates of harmful incidents， and low treatment-seeking rate， with affected patients demonstrating increased frequencies of dangerous behaviors. Ningxia Hui Autonomous Region has implemented community management for patients with severe mental disorders across the region since 2004， while the current status and regional characteristics of the managed patients remain unclear. ObjectiveTo analyze the current status of management and treatment of patients with severe mental disorders in Ningxia Hui Autonomous Region， and to explore their regional distribution characteristics， so as to provide references for optimizing regional prevention and control strategies. MethodsPatients with severe mental disorders diagnosed and registered in the Severe Mental Disorder Management Information Platform of Ningxia Hui Autonomous Region from August 1， 2011 to December 31， 2021 were selected. Patients' basic information， management indicators， and treatment metrics were extracted from the platform， followed by descriptive statistical analysis of the corresponding data. ResultsAs of December 31， 2021， the permanent resident population of Ningxia Hui Autonomous Region was 6 946 540， with 29 787 registered patients with severe mental disorders. The majority of the patients were female （50.25%）， aged 18-59 years （79.01%）， with educational level of junior high school or below （84.63%）， married （52.87%）， farmers （56.01%）， and diagnosed with schizophrenia （55.91%）， while ethnic minority patients accounted for a relatively high proportion （31.35%）. In 2021， the reported prevalence rate of severe mental disorders in Ningxia Hui Autonomous Region was 0.43%， with standardized management and regular medication adherence rates at 90.39% and 66.34%， respectively. The standardized management rate in 8 counties/districts （36.36%） was lower than the average level of Ningxia Hui Autonomous Region， while 10 counties/districts （45.45%） showed below-average medication adherence rates， of which 6 counties/districts（60.00%） were located in the south-central region. ConclusionPatients with severe mental disorders in Ningxia Hui Autonomous Region are predominantly young and middle-aged adults with low level of education， and those in the central-southern region demonstrate lower medication adherence. ［Funded by Key Research and Development Program Project of Ningxia Hui Autonomous Region （number， 2023BEG02029）］

With the rapid development of competitive sports, the incidence of anterior cruciate ligament (ACL) injury is on the rise. Such injuries may shorten athletes′ career and lead to other long-term adverse consequences. Although athletes generally recover well after ACL reconstruction, many still struggle to return to their pre-injury performance levels. Advances in the understanding of ACL anatomy and injury mechanisms, along with the evolution of surgical techniques and rehabilitation methods, have provided more individualized and tailored options for athletes following ACL injuries. However, there is currently no consensus in China regarding surgical and rehabilitation strategies for competitive athletes aiming to return to sports after ACL injuries. To this end, the Sports Medicine Committee of the Chinese Research Hospital Association and the Editorial Board of the Chinese Journal of Trauma jointly formulated the Expert consensus on surgical treatment and rehabilitation for competitive sports athletes returning to sports after anterior cruciate ligament injury ( version 2025), and presented 14 recommendations covering surgical indications, preoperative rehabilitation, surgical timing, surgical strategies and postoperative rehabilitation strategies, aiming to improve the surgical treatment and rehabilitation system for ACL injuries in competitive athletes and facilitate their return to high-level sports performance after injury.