ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

Objective: To investigate the correlation between color parameters (L^*, a^*, b^*, Eab^*) and the contents of reducing sugars, total polysaccharides, total oligosaccharides, as well as four saccharides (fructose, glucose, sucrose, and kestose) during the nine cycles of steaming and sun-drying processing of Polygonatum kingianum, and to preliminarily explore the optimal processing duration.
Methods: The color changes were objectively evaluated using a colorimeter. The anthrone-sulfuric acid method was employed to determine total polysaccharides and oligosaccharides. The 3,5-dinitrosalicylic acid (DNS) colorimetric method was used to measure total reducing sugar content. High-performance liquid chromatography coupled with charged aerosol detection (HPLC-CAD) was applied for quantitative analysis of fructose, glucose, sucrose, and kestose. Multivariate statistical analysis was conducted to assess samples from different processing stages.
Results: Significant variations in color and component contents were observed across processing stages. The herbal pieces progressively darkened with increased processing cycles: brightness (L^*) and total color difference (Eab^*) initially decreased then stabilized, while a^* (red-green) and b^* (yellow-blue) values first increased then declined. Total polysaccharides and oligosaccharides showed overall decreasing trends, whereas reducing sugars initially increased before stabilizing. Fructose and glucose levels rose continuously, while sucrose and kestose decreased progressively, becoming undetectable after five cycles.
Conclusion: The chromatic alteration and saccharide composition of P. kingianum showed significant correlation with processing duration. Both total color difference (Eab^*) and reducing sugar content stabilized after four processing cycles (12 hours), suggesting that four cycles of steaming and sun-drying may represent the optimal processing duration.

Objective: To investigate the correlation between the color parameters (L^*, a^*, b^*, Eab^* values) of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques and the contents of 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucopyranoside, emodin, physcion, emodin-8-O-β-D-glucopyranoside, physcion-8-O-β-D-glucopyranoside.
Methods: The L^*, a^*, b^* and Eab^* values of Polygoni Multiflori Radix Praeparata powder prepared by different processing techniques were determined by spectrophotometer, and the contents of the five components were determined by high performance liquid chromatography. Secondly, SPSS 26.0 software and Simca 14.1 software were used to analyze the correlation.
Results: Through the hierarchical cluster analysis (HCA), it was found that the steamed samples and black bean steamed samples could be obviously divided into two categories: raw products and processed products. The processed products could be further divided into 2-8 h and 12-48 h. Pearson correlation analysis showed that the content of stilbene glycoside was significantly positively correlated with L^*, a^* and b^* values (P<0.01). The a^* value was significantly positively correlated with the content of emodin and physcion (P<0.01). Emodin-8-O-β-D-glucoside was positively correlated with L^* value and b^* value, while physcion-8-O-β-D-glucoside was negatively correlated with a^* value. Partial least squares discriminant analysis (PLS) showed that 2,3,5,4’-tetrahydroxystilbene-2-O-β-D-glucoside (VIP=1.69) and emodin-8-O-β-D-glucoside (VIP=1.06) were the key variables affecting chromaticity characteristics (P<0.01).
Conclusion: The three processes of steaming, black bean steaming and black bean stewing are consistent in composition transformation and chromaticity variation, and stilbene glycoside can be used as a specific index component to characterize the processed color. Chromatic parameters can effectively reflect the processing progression and serve as quality monitoring indicators during production.

ObjectiveTo investigate the effects of Ditantang on metabolic dysfunction-associated fatty liver disease （MAFLD） in rats by focusing on the regulation of glycogen synthesis mediated by the uridine diphosphate glucose （UDPG）-site-1-protease （S1P）-sterol regulatory element-binding protein （SREBP） axis. MethodsMAFLD was modeled in SD rats by feeding a high-fat diet for 12 weeks. Rats were randomized into a control group， a model group， low-， medium-， and high-dose （2.68， 5.36， and 10.72 g·kg^-1·d^-1， respectively） Ditantang groups， and a positive control （Yishanfu， 0.18 g·kg^-1·d^-1） group. Starting from week 9 of modeling， each treatment group received corresponding drug interventions via gavage. After the experiment， the serum levels of total cholesterol （TC）， triglyceride （TG）， low-density lipoprotein cholesterol （LDL-C）， and high-density lipoprotein cholesterol （HDL-C） were measured. The levels of TG， non-esterified fatty acids （NEFA）， glycogen， glucose-6-phosphate （G6P）， glucose-1-phosphate （G1P）， and UDPG in the liver tissue samples were measured by biochemical assay kits. Liver pathological morphology and lipid/glycogen deposition were observed via hematoxylin-eosin （HE） staining， oil red O staining， and Periodic acid-Schiff （PAS） staining. Immunofluorescence assay was conducted to detect the expression and localization of phosphoglucomutase-1 （Pgm1） and UDP-glucose pyrophosphorylase 2 （Ugp2） in the rat liver. Real-time PCR and Western blot were employed to quantify mRNA and protein levels， respectively， of key glycogen synthesis enzymes （Pgm1 and Ugp2）， key lipogenesis-related transcription factor SREBP and its target genes ［acetyl-CoA carboxylase （ACC）， fatty acid synthetase （FASN）， and stearoyl-CoA desaturase （SCD1）］， as well as S1P. ResultsCompared with the control group， the model group exhibited elevated levels of TC， TG， LDL-C in the serum and TG and NEFA in the liver， decreased serum HDL-C level （P<0.01）， reduced hepatic levels of G1P， G6P， UDPG， and glycogen （P<0.01）， appearance of fat vacuoles of varying sizes and abundant red lipid droplets， with prominent lipid deposition and reduced areas of deep glycogen staining in the liver tissue， upregulated mRNA and protein levels of SREBP1， S1P， ACC， FASN， and SCD1 （P<0.01）， and downregulated mRNA and protein levels of Pgm1 and Ugp2 （P<0.01）. Compared with the model group， all doses of Ditantang reduced the levels of TC and TG in the serum and TG and NEFA in the liver， while elevating the serum HDL-C level. Additionally， medium- and high-dose Ditantang reducted the LDL-C level （P<0.05）. Ditantang at all doses increased the hepatic levels of G1P， G6P， UDPG， and glycogen， alleviated hepatic steatosis and lipid deposition， enhanced glycogen storage， downregulated the mRNA and protein levels of SREBP1， S1P， ACC， FASN， and SCD1 （P<0.05）， while upregulating the expression of Pgm1 and Ugp2 （P<0.01）. Immunofluorescence analysis revealed decreased fluorescence intensity of S1P and enhanced fluorescence intensity of Ugp2 （P<0.01）. ConclusionDitantang can regulate glycogen synthesis through the UDPG-S1P-SREBP axis to prevent and treat MAFLD.

Electromagnetic fields can regulate the fundamental biological processes involved in bone remodeling. As a non-invasive physical therapy, electromagnetic fields with specific parameters have demonstrated therapeutic effects on bone remodeling diseases, such as fractures and osteoporosis. Electromagnetic fields can be generated by the movement of charged particles or induced by varying currents. Based on whether the strength and direction of the electric field change over time, electromagnetic fields can be classified into static and time-varying fields. The treatment of bone remodeling diseases with static magnetic fields primarily focuses on fractures, often using magnetic splints to immobilize the fracture site while studying the effects of static magnetic fields on bone healing. However, there has been relatively little research on the prevention and treatment of osteoporosis using static magnetic fields. Pulsed electromagnetic fields, a type of time-varying field, have been widely used in clinical studies for treating fractures, osteoporosis, and non-union. However, current clinical applications are limited to low-frequency, and research on the relationship between frequency and biological effects remains insufficient. We believe that different types of electromagnetic fields acting on bone can induce various “secondary physical quantities”, such as magnetism, force, electricity, acoustics, and thermal energy, which can stimulate bone cells either individually or simultaneously. Bone cells possess specific electromagnetic properties, and in a static magnetic field, the presence of a magnetic field gradient can exert a certain magnetism on the bone tissue, leading to observable effects. In a time-varying magnetic field, the charged particles within the bone experience varying Lorentz forces, causing vibrations and generating acoustic effects. Additionally, as the frequency of the time-varying field increases, induced currents or potentials can be generated within the bone, leading to electrical effects. When the frequency and power exceed a certain threshold, electromagnetic energy can be converted into thermal energy, producing thermal effects. In summary, external electromagnetic fields with different characteristics can generate multiple physical quantities within biological tissues, such as magnetic, electric, mechanical, acoustic, and thermal effects. These physical quantities may also interact and couple with each other, stimulating the biological tissues in a combined or composite manner, thereby producing biological effects. This understanding is key to elucidating the electromagnetic mechanisms of how electromagnetic fields influence biological tissues. In the study of electromagnetic fields for bone remodeling diseases, attention should be paid to the biological effects of bone remodeling under different electromagnetic wave characteristics. This includes exploring innovative electromagnetic source technologies applicable to bone remodeling, identifying safe and effective electromagnetic field parameters, and combining basic research with technological invention to develop scientifically grounded, advanced key technologies for innovative electromagnetic treatment devices targeting bone remodeling diseases. In conclusion, electromagnetic fields and multiple physical factors have the potential to prevent and treat bone remodeling diseases, and have significant application prospects.

Medical device related infections caused by bacteria are common complications in clinical practice,and preventing bacterial colonization on the surface of medical materials is one of the important challenges in the medical field.Therefore,there is an urgent need to construct medical coatings that combine antibacterial properties and biocompatibility.In this study,a γ-polyglutamic acid(γ-PGA)complex with long-chain alkyl quaternary ammonium salts formed by electrostatic and hydrophobic interactions was prepared,which was insoluble in water but soluble in organic solvents(e.g.,ethanol),and was capable of constructing antimicrobial coatings on the surfaces of medical materials in a simple and efficient manner.The bactericidal effect of the coating was verified using viable bacteria counting experiments,and the results showed that the bactericidal rate of the coated thermoplastic polyurethane(TPU)membrane against Staphylococcus aureus was greater than 99.9%compared with that of the uncoated TPU membrane.In addition,a cytotoxicity assay was performed using the L929 fibroblast and cell proliferation detection kit(CCK-8),which showed that the survival rate of L929 fibroblasts on coated TPU was greater than 90%.Meanwhile,the hemolysis rate of coated erythrocytes was tested using fresh rabbit red blood cells(RBCs),and the hemolysis rate on the coated TPU surface was 1.5%.The above results indicated that the coating had good biocompatibility.The preparation method of medical antibacterial coating reported in this study provided a new idea for preventing bacterial infections related to implantable/interventional medical devices.

Forensic medicine has been designated as a first-level discipline,presenting new opportunities and challenges for the development of forensic medicine.Since the 1980s,the establishment of foren-sic medicine discipline and the cultivation of high-level forensic talents have become hot topics in the development of forensic medicine in China.Since the 13th Five-Year Plan,the forensic team of Shanxi Medical University has been aiming at the forefront,proposing the development goals of"Five First-class"and the discipline development path"Six Major Achievements".It has selected benchmark disci-plines,identified gaps in disciplinary development,unified thoughts,formulated completion timelines,concentrated superior resources,assigned tasks to individuals,and created an"Organized Fill-in-the-Blank Format"forensic medicine discipline construction model with the characteristics of the new era.The construction model of forensic medicine has achieved good results in the goals,discipline frame-work,scientific research,talent cultivation,discipline team and platform construction,forming a rela-tively complete discipline construction and management system,and accumulating valuable experience for the construction of first-level discipline and high-level talent cultivation of forensic medicine.

Aim To investigate the effect of p-AMPK activity on autophagy in different subtypes of MDA-MB-231(triple-negative breast cancer cells)and MCF-7(estrogen receptor-positive cells)and its regulatory mechanism.Methods MDA-MB-231 cells were trea-ted with EBSS,Baf-A1,and EBSS+Baf-A1 for four hours,and MCF-7 cells for eight hours.The effects of autophagy on cell proliferation and apoptosis were ob-served,mitochondrial morphology was examined,and the expression of autophagy markers LC3B,P62,LAMP1,TOM20,AMPK,p-AMPK,ULK1,and Bec-lin1/VPS34 proteins was detected.The autophagy pathway was validated by inhibiting AMPK activity.Results Breast cancer cells underwent autophagy af-ter starvation induction(EBSS),with inconsistent au-tophagy processes observed in different subtypes of breast cancer cells.Autophagy inhibited cell prolifera-tion.In MDA-MB-231 cells,autophagy led to an in-crease in p-AMPK levels and a decrease in ULK1 lev-els,initiating autophagy through p-AMPK activation of ULK1.In MCF-7 cells,both p-AMPK and ULK1 levels decreased after autophagy,suggesting that autophagy might not be mediated by p-AMPK activation.Conclu-sions MDA-MB-231 cells primarily initiate autophagy by directly activating ULK1 by p-AMPK,independent of the MTOR pathway.In MCF-7 cells autophagy might be triggered by inhibiting MTOR through AMPK activity or directly activating MTOR through other up-stream factors.Regulating p-AMPK activity based on the autophagy pathways in different cell subtypes could enable more precise targeting and treatment of different types of breast cancer.

The PA-PB1 interface of the influenza polymerase is an attractive site for antiviral drug design. In this study, we designed and synthesized a mini-library of indazole-containing compounds based on rational structure-based design to target the PB1-binding interface on PA. Biological evaluation of these compounds through a viral yield reduction assay revealed that compounds 27 and 31 both had a low micromolar range of the half maximal effective concentration (EC₅₀) values against A/WSN/33 (H1N1) (8.03 μmol/L for 27; 14.6 μmol/L for 31), while the most potent candidate 24 had an EC₅₀ value of 690 nM. Compound 24 was effective against different influenza strains including a pandemic H1N1 strain and an influenza B strain. Mechanistic studies confirmed that compound 24 bound PA with a K _d which equals to 1.88 μmol/L and disrupted the binding of PB1 to PA. The compound also decreased the lung viral titre in mice. In summary, we have identified a potent anti-influenza candidate with potency comparable to existing drugs and is effective against different viral strains. The therapeutic options for influenza infection have been limited by the occurrence of antiviral resistance, owing to the high mutation rate of viral proteins targeted by available drugs. To alleviate the public health burden of this issue, novel anti-influenza drugs are desired. In this study, we present our discovery of a novel class of indazole-containing compounds which exhibited favourable potency against both influenza A and B viruses. The EC₅₀ of the most potent compounds were within low micromolar to nanomolar concentrations. Furthermore, we show that the mouse lung viral titre decreased due to treatment with compound 24. Thus our findings identify promising candidates for further development of anti-influenza drugs suitable for clinical use.

The implementation of the Good Pharmacovigilance Practice(GVP)in 2021 has laid a solid foundation for improving China's pharmacovigilance system,a matter of paramount importance currently emphasized by Marketing Authorization Holders(MAHs).Given the unique organizational structures of corporate groups,establishing a centralized pharmacovigilance system can optimize resource utilization.This paper analyzes the challenges faced by corporate groups in developing such central-ized systems and proposes an organizational framework with defined operational divisions.The findings aim to provide actionable insights for vaccine manufacturers in establishing and refining life cycle pharmacovigilance systems.