Xanthine oxidase (XO) is an important therapeutic target for the treatment of hyperuricemia and gout. Based on the previously identified potent XO inhibitor 1, seventeen oxadiazoles and their ring-opening analogues were designed and synthesized via the bioisostere replacement strategy. Among them, compounds 2l, 2n, and 3b showed obvious XO inhibitory activity at the concentration of 10 μmol·L^-1, and compound 3b exhibited an IC₅₀ value of 1.45 μmol·L^-1.

Objective To observe the efficacy and safety of Morinda officinalis oligosaccharides in the continuation treatment of mild and moderate depression.Methods An open,single-arm,multi-center design was adopted in our study.Adult patients with mild and moderate depression who had received acute treatment of Morinda officinalis oligosaccharides were enrolled and continue to receive Morinda officinalis oligosaccharides capsules for 24 weeks,the dose remained unchanged during continuation treatment.The remission rate,recurrence rate,recurrence time,and the change from baseline to endpoint of Hamilton Depression Scale(HAMD),Hamilton Anxiety Scale(HAMA),Clinical Global Impression-Severity(CGI-S)and Arizona Sexual Experience Scale(ASEX)were evaluated.The incidence of treatment-related adverse events was reported.Results The scores of HAMD-17 at baseline and after treatment were 6.60±1.87 and 5.85±4.18,scores of HAMA were 6.36±3.02 and 4.93±3.09,scores of CGI-S were 1.49±0.56 and 1.29±0.81,scores of ASEX were 15.92±4.72 and 15.57±5.26,with significant difference(P＜0.05).After continuation treatment,the remission rate was 54.59％(202 cases/370 cases),and the recurrence rate was 6.49％(24 cases/370 cases),the recurrence time was(64.67±42.47)days.The incidence of treatment-related adverse events was 15.35％(64 cases/417 cases).Conclusion Morinda officinalis oligosaccharides capsules can be effectively used for the continuation treatment of mild and moderate depression,and are well tolerated and safe.

Hyperkalemia is one of the common ion metabolism disorders in clinical practice. Hyperkalemia is defined as serum potassium higher than 5.0 mmol/L according to the guidelines at home and abroad. Acute severe hyperkalemia can cause serious consequences, such as flaccid paralysis, fatal arrhythmia, and even cardiac arrest. The use of renin-angiotensin- aldosterone system inhibitors, β-blockers and diuretics, low-sodium and high-potassium diets, and the presence of related comorbidities increase the occurrence of hyperkalemia. Hyperkalemia risk exist in all clinical departments, but there is a lack of a standardization in the management of multi- department cooperation in hospital. Therefore, a number of domestic nephrology and cardiology department experts have discussed a management model for multi-department cooperation in hyperkalemia, formulating the management standard on hospital evaluation, early warning, diagnosis and treatment, and process. This can promote each department to more effectively participate in nosocomial hyperkalemia diagnosis and treatment, as well as the long-term management of chronic hyperkalemia, improving the quality of hyperkalemia management in hospital.

Alzheimer's disease (AD) is a progressive neurodegenerative disease associated with dysfunctions related to thinking, learning, and memory of the brain. AD has multiple pathological characteristics with complicated causes, constructing a suitable pathological model is crucial for the research of AD. Microfluidic chip technology integrates multiple functional units on a chip, which can realize microenvironmental control similar to the physiological environment. It is well applied in the construction of pathological model, early diagnosis as well as drug screening of AD. This paper focuses on the construction of AD microfluidic chips model from the perspective of cell type, culture formats and the chips structure as well as the research progress of microfluidic chips in AD application based on the pathological characteristics of AD, which will provide a reference for further elucidation of AD mechanism and drug development.

Chronic prostatitis is a common and frequently occurring disease in male clinics. Due to the diverse symptoms， complex etiology， unclear mechanisms， and recurrent episodes of chronic prostatitis， Western medicine often faces the challenge of limited treatment options and unsatisfactory outcomes. In order to fully leverage the unique advantages of traditional Chinese medicine （TCM） in the treatment of chronic prostatitis， the China Association of Chinese Medicine organized a discussion among experts from the fields of TCM urology， Western urology， and related pharmacy. The experts focused on the advancements in the understanding of chronic prostatitis in modern medicine， various theories on the etiology， pathogenesis， and treatment of chronic prostatitis in TCM， entry points from interdisciplinary fields， the role and advantages of TCM in the comprehensive management of chronic prostatitis， and research into mechanisms related to chronic prostatitis. After discussions， the experts concluded that chronic prostatitis is one of the diseases where TCM has a distinct advantage. TCM can effectively improve the clinical syndromes of chronic prostatitis， including urinary issues， social psychology， organ specificity， infection， nervous system problems， pain and discomfort， sexual dysfunction， etc.， and can enhance the quality of life. For patients with chronic prostatitis who cannot tolerate or may not accept the adverse effects of Western medicine， as well as for those with non-inflammatory chronic prostatitis/chronic pelvic pain syndrome （CP/CPPS）， those with pain as the primary symptom， those with urinary tract symptoms， those with coexisting anxiety and depression， and those with abnormal semen liquefaction， TCM-based treatment can be the main approach. Currently， the optimal diagnosis and treatment strategy for chronic prostatitis has not yet been established， and further research from perspectives such as clinical epidemiology， evidence-based medicine， and molecular biology is needed. Both TCM and Western medicine should integrate their respective strengths， clarify the role and advantages of TCM interventions based on mutual reference， and improve the diagnosis and treatment standards for chronic prostatitis in China.

ObjectiveTo investigate the clinical features of patients with acute-on-chronic liver failure （ACLF） and bacterial infection and early warning indicators associated with multidrug-resistant infections. MethodsA retrospective analysis was performed for 130 patients with ACLF and bacterial infection who attended The Second Affiliated Hospital of Air Force Medical University from January 1， 2010 to December 31， 2021， and according to the drug susceptibility results， the patients were divided into multidrug-resistant （MDR） bacterial infection group with 80 patients and non-MDR bacterial infection group with 50 patients. General information and laboratory examination results were compared between the two groups to screen for the early warning indicators associated with MDR bacterial infection. The Student’s t-test was used for comparison of normally distributed continuous data with homogeneity of variance between two groups， and the Mann-Whitney U test was used for comparison of non-normally distributed continuous data or continuous data with heterogeneity of variance between two groups； the chi-square test or the Fisher’s exact test was used for comparison of categorical data between two groups. The binary logistic regression analysis and the receiver operating characteristic （ROC） curve were used to assess the predictive value of early warning indicators. ResultsAmong the 130 patients with ACLF and bacterial infection， sputum （27.7%） was the most common specimen for detection， followed by blood （24.6%）， urine （18.5%）， and ascites （17.7%）. Bacterial infections were dominated by Gram-negative bacteria （58.5%）. Of all bacteria， Escherichia coli （18.5%）， Klebsiella pneumoniae （14.6%）， and Enterococcus faecium （13.8%） were the most common pathogens. Gram-positive bacteria had a high resistance rate to the antibacterial drugs such as erythromycin （72.2%）， penicillin （57.4%）， ampicillin （55.6%）， and ciprofloxacin （53.7%）， while Gram-negative bacteria had a high resistance rate to the antibacterial drugs such as ampicillin （73.3%）， cefazolin （50.0%）， and cefepime （47.4%）. The patients with ACLF and bacterial infection had a relatively high rate of MDR bacterial infection （61.5%）. Comparison of clinical data between the two groups showed that compared with the patients with non-MDR bacterial infection， the patients with MDR bacterial infection had significantly higher levels of alanine aminotransferase （Z=2.089， P=0.037）， aspartate aminotransferase （Z=2.063， P=0.039）， white blood cell count （Z=2.207， P=0.027）， and monocyte count （Z=4.413， P<0.001）. The binary logistic regression analysis showed that monocyte count was an independent risk factor for MDR bacterial infection （odds ratio=7.120， 95% confidence interval ［CI］： 2.478‍ ‍—‍ ‍20.456，P<0.001） and had an area under the ROC curve of 0.686 （95%CI： 0.597‍ ‍—‍ ‍0.776） in predicting ACLF with MDR bacterial infection（P<0.001）， with the optimal cut-off value of 0.50×10⁹/L， a sensitivity of 0.725， and a specificity of 0.400. ConclusionACLF combined with bacterial infections is mainly caused by Gram-negative bacteria， with the common pathogens of Escherichia coli and Klebsiella pneumoniae and a relatively high MDR rate in clinical practice. An increase in monocyte count can be used as an early warning indicator to distinguish MDR bacterial infection from non-MDR bacterial infection.

Biosensor analysis technology is a kind of technology with high specificity that can convert biological reactions into optical and electrical signals. In the development of drugs for Alzheimer's disease (AD), according to different disease hypotheses and targets, this technology plays an important role in confirming targets and screening active compounds. This paper briefly describes the pathogenesis of AD and the current situation of therapeutic drugs, introduces three biosensor analysis techniques commonly used in the discovery of AD drugs, such as surface plasmon resonance (SPR), biolayer interferometry (BLI) and fluorescence analysis technology, explains its basic principle and application progress, and summarizes their advantages and limitations respectively.

Objective:To analyze the influence of forming direction on the surface characteristics,elastic modulus,bending strength and fracture toughness of printed parts and the relationship between forming direction and force direction,and to provide scientific basis and guidance for the clinical applica-tion of oral denture base resin materials.Methods:The 3D printing technology was used to print denture base resin samples.The shape and size of the samples referred to the current standard for testing conven-tional denture base materials.The samples used for physical performance testing were cylindrical(with a diameter of 15 mm and a thickness of 1 mm)and printed at different angles along the Z axis(0°,45°,90°).Scanning electron microscope was used to observe the microscopic topography of the different sam-ples.The color stability of different samples was observed by color stabilizer.The surface roughness of the samples was analyzed by using surface roughness tester.The Vickers hardness was measured to ana-lyze the hardness of the samples.The samples used for mechanical performance testing were rectangular(elastic modulus and bending strength:A length of 64 mm,a width of 10 mm,and a height of 3.3 mm;fracture toughness:A length of 39 mm,a width of 8 mm,and a height of 4 mm),divided into two groups:W group and H group.The W group was printed from the bottom up along the Z axis with the length × width as the bottom surface parallel to the X,Y axis plane,while the H group printed from the bottom up along the Z axis with the length × height as the bottom surface parallel to the X,Y axis plane.The forming angles of both groups were equally divided into 0°,45°,and 90°.The elastic modulus,bending strength and fracture toughness of different samples were studied through universal mechanical testing machine.SPSS 22.0 software was used for statistical analysis.Results:The microscopic topogra-phy and roughness of different samples were closely related to the printing direction,with significant differences between the 0°,45°,and 90° specimens.The 0° specimens had the smoothest surface(roughness＜1 μm).The surface of the 45 ° specimen was the roughest(roughness＞3 μm).The microhardness of the 0° sample was the best[(196.13±0.20)MPa],with a significant difference com-pared with the 90° sample[(186.62±4.81)MPa,P＜0.05].The mechanical properties of different samples were also closely related to the printing direction.The elastic modulus,bending strength,and fracture toughness of the 45° samples in the W group were the highest compared with the other groups.The results of elastic modulus showed that in the H group,the 45° specimens had the highest elastic mo-dulus,which was significantly different from the 0° and 90° specimens(P＜0.05).The elastic modulus of 0° and 45° specimens in the W group were higher than those in 90° specimens(P＜0.05).The bending strength results showed that there was no significant difference between the specimens from dif-ferent angles in the H group.The bending strength of the 90° specimens in the W group was the smallest,and there was a significant difference between 90° and the 0° and 45° specimens(P＜0.05);And the bendind strength of the 0° and 45° specimens in the W group was significantly higher than that of the 0° and 45° specimens in the H group(P＜0.05).The fracture toughness results showed that the fracture toughness of the H group specimens was lower than 1.9 MPa m1/2,which was specified in the denture base standard.The 45° samples in the W group were the highest,with significant differences compared with the 0° and 90° samples(P＜0.05).And the 90° samples of the W group specimens were lower than 1.9 MPa m1/2.And the fracture toughness of the 45° specimen in the W group was significantly higher than that of all the specimens in the H group(P＜0.05).Conclusion:The 0° samples had rela-tively better physical properties.The 45° samples had the best mechanical properties.But the fracture toughness of specimens(H group and 90° samples of W group)did not yet meet clinical requirements.That indicated that the characteristics of the 3D printing denture base resin were affected by the printing direction.Only when the performance of the printed samples in all directions met the minimum require-ments of the standard,they could be used in clinical practice.

Objective To investigate the association of 13 single nucleotide polymorphism(SNP)sites in 6 phalange-bone development related genes[fibroblast growth factor receptor 2(FGFR2),indian hedgehog signaling molecule(IHH),Msh homeobox 1(MSX1),Runx family transcription factor 2(RUNX2),SRY-box transcription factor 9(SOX9),Wnt family member 5A(WNT5A)]with human index-ring finger length ratio(2D∶4D).Methods Digital cameras were used to take frontal photographs of the hands of 731 college students(358 males and 373 females)in Ningxia,and image analysis software was used to mark anatomical points and measure finger lengths of index(2th)and ring(4th);genotyping of 13 SNP sites(rs1047057,rs755793,rs41258305,rs3731881,rs3100776,rs12532,rs3821949,rs45585135,rs3749863,rs1042667,rs12601701,rs1829556,rs3732750)for 6 genes by multiplex PCR;One-Way ANOVA or independent sample t-test indirectly assessed the association between 2D∶4D and 13 SNP sites.Results Both left and right hand 2D∶4D were significantly higher in females than males in Ningxia college students(all P<0.01);no statistically significant differences in genotype and allele frequencies of the 13 SNP sites among different sexes(all P>0.05);among different sexes,male left hand 2D∶4D was significantly associated with the genotype of SOX9 gene rs12601701 site(P<0.05)and right hand 2D∶4D was significantly associated with the genotype of WNT5A gene rs1829556 site(P<0.05);the female right hand 2D∶4D was significantly associated with the MSX1 gene rs12532(P<0.01)and rs3821949(P<0.05)sites genotypes.Conclusion SOX9(rs12601701),WNT5A(rs1829556)and MSX1(rs12532 and rs3821949)gene polymorphisms may be associated with the formation of 2D∶4D in Ningxia population.

Objective To explore the therapeutic mechanism of Modified Lugen Formula(Phragmitis Rhizoma,Cicadae Periostracum,Batryticatus Bombyx,Lonicerae Japonicae Flos,Glycyrrhiza,Menthae Haplocalycis Herba,Notopterygii Rhizoma et Radix,Puerariae Lobatae Radix,Bupleuri Radix)in treating influenza from the virus-host interaction interface.Methods The phytocompounds were first collected from the HERB database,and then potential active compounds were screened out by Lipinski's rules of five.The targets of active compounds were further predicted through the SwissTargetPrediction platform.Differentially expressed genes(DEGs)were determined from the human H1N1 influenza dataset GSE90732 available in the Gene Expression Omnibus database(GEO).H1N1-Homo sapiens-related protein-protein interactions(PPIs)were gathered from the Pathogen-Host Interaction Search Tool(PHISTO).The above mentioned bioinformatic datasets were integrated.Then a PPI network and a Formula-virus-host interaction network were constructed using Cytoscape.Functional enrichment analyses were performed by using R software.Finally,molecular docking was carried out to evaluate the binding activities between the key compounds and targets.Results A total of 1 252 active compounds,1 415 targets,951 influenza-related DEGs,and 10 142 H1N1-Homo sapiens-related PPIs were obtained.There were 72 intersection targets between the Modified Lugen Formula and influenza.Functional enrichment analyses showed that these targets are closely related to host defense and programmed cell death.The network topological analysis showed that active compounds in the Modified Lugen Formula,such as oleanolic acid,γ-undecalactone,and longispinogenin,regulate viral proteins M2,NA,NS1,and HA and/or the host factors HSP90AA1,NRAS,and ITGB1,thus exert therapeutic effect.Molecular docking results confirmed that these compounds had a good binding ability with the targets.Conclusion Multiple active ingredients in Modified Lugen Formula directly target influenza virus proteins and/or host factors,thereby play an anti-influenza role in multiple dimensions,including inhibiting virus replication,regulating host defense and cell death.This study provides a theoretical basis for further experimental analysis of the action mechanism of the Modified Lugen Formula in treating influenza.