ObjectiveTo investigate the changes in chemical components of Gardeniae Fructus（GF） before and after being charred， providing data support for research on the material basis of GF Carbonisata（GFC）. MethodsUltra-performance liquid chromatography-quadrupole-electrostatic field orbitrap high-resolution mass spectrometry（UPLC-Q-Orbitrap MS/MS） was used to conduct a comprehensive analysis of the chemical components in GF and GFC under positive and negative ion modes with Compound Discoverer 3.3 software and online database. Then， principal component analysis and partial least squares-discriminant analysis in SIMCA14.1 software were used to analyze the MS data of each sample. Based on the principle of variable importance in the projection（VIP） value>1， differential secondary and primary metabolites before and after carbonization were screened. In addition， MetaboAnalyst website was used for pathway enrichment of Kyoto Encyclopedia of Genes and Genomes（KEGG）， so as to provide a reference for clarifying the processing mechanism. ResultsA total of 185 components were identified， including 96 secondary metabolites and 89 primary metabolites. These components were classified into nine categories， primarily including iridoid glycosides， flavonoids， and terpenoids， their fragmentation pathways were also analyzed. Simultaneously， multivariate statistical analysis was performed on the secondary and primary metabolites， identifying 70 and 59 differential metabolites， respectively. The secondary metabolites were enriched in two metabolic pathways， including C5-branched dibasic acid metabolism and flavonoid and flavonol biosynthesis， while the primary differential metabolites were enriched in seven pathways such as linoleic acid metabolism and tyrosine metabolism. ConclusionThe chemical components of GF change significantly after carbonization， with a significant decrease in the contents of iridoid glycosides and terpenoids such as hydroxyisogeniposide， crocin Ⅱ， crocetin， and jasminoside B. while the contents of 4-hydroxycoumarin， geniposidic acid， gentiopicroside， and gardenoside methyl ester increase significantly. This change is presumed to be associated with the enhanced cooling and hemostatic effects of the processed products. The identified key components provide a basis for elucidating the material basis underlying the efficacy changes before and after carbonization.

OBJECTIVE To provide a scientific basis for the quality evaluation and clinical application of Qingwen hufei granules. METHODS Fourteen batches of Qingwen hufei granules were used as samples to establish high-performance liquid chromatography （HPLC） fingerprints using the Similarity Evaluation System for Chromatographic Fingerprint of Traditional Chinese Medicine （2012 Edition）. The chromatographic peaks were identified and the similarity was evaluated. Cluster analysis （CA）， principal component analysis （PCA）， and orthogonal partial least squares-discriminant analysis （OPLS-DA） were used to conduct chemical pattern recognition analysis on the 14 batches of samples. Meanwhile， the contents of neochlorogenic acid （NGA）， chlorogenic acid （CHA）， cryptochlorogenic acid （CGA）， forsythoside A （FTA）， 3，5-O-dicaffeoylquinic acid （3，5-O- DA）， 4，5-O-dicaffeoylquinic acid （4，5-O-DA）， and angoroside C （AGC） in the samples were determined by HPLC. RESULTS The methodological investigation results of both the fingerprint and the content determination complied with the relevant requirements. Fourteen common peaks were indicated in the HPLC fingerprints of the 14 batches of samples， and 7 of them were identified [NGA （peak 2）， CHA （peak 3）， CGA （peak 5）， FTA （peak 11）， 3，5-O-DA （peak 12）， 4，5-O-DA （peak 13）， and AGC （peak 14）]； the similarity of each sample was greater than 0.94. The results of CA and PCA showed that the samples could be classified into 3 categories； the results of OPLS-DA indicated that peak 4 （unknown）， peak 11 （FTA）， peak 8 （unknown）， peak 9 （unknown）， and peak 1 （unknown） were the differential components. The content ranges of NGA， CHA， CGA， 3，5-O-DA， FTA， 4，5-O-DA and AGC in the 14 batches of samples were 0.210 4-0.458 7， 0.269 1-0.506 3， 0.228 1-0.461 1， 0.443 9-1.044 6， 0.066 7-0.155 7， 0.062 8-0.143 8， and 0.057 4-0.105 7 mg/g， respectively. CONCLUSIONS The HPLC fingerprint and multi-component content determination methods established in this study are efficient and reliable， and can be used for the quality evaluation of Qingwen hufei granules.

Background: Chronic pain significantly affects daily activities, mental health, and the interpersonal relationships of patients. Consequently, physicians use various treatments to manage pain. This study investigated the perceptions of treatment, accompanying symptoms, and other problems in patients with chronic pain. Methods: The authors enrolled patients with chronic pain from 19 university hospitals in South Korea. Data was collected on age, gender, diagnosis, disease duration, severity of pain, perception of pain treatment, and accompanying symptoms or problems using an anonymous survey comprising 19 questions. Results: In total, 833 patients with chronic pain completed the survey, and 257 (31.0%) and 537 (64.5%) patientsexpressed concerns about the potential adverse effects of medication and opioid addiction, respectively. Personalitychanges such as irritability or anger were the most frequent accompanying symptoms in 507 (63.8%) patients, followed by depression and sleep disturbance in 462 (58.1%) and 450 (54.5%) patients, respectively. Depression (P = 0.001) and anxiety (P = 0.029) were more common among women, whereas divorce (P = 0.016), family conflict (P < 0.001), unemployment (P < 0.001), suicide attempts (P < 0.001), and restrictions on economic activity (P < 0.001) were more common among men. The frequency of accompanying symptoms, except for suicidal ideation,was higher in the younger patients aged ≤ 40 years than in the older patients aged > 40 years. Conclusions Many patients with chronic pain had concerns about adverse effects or medication tolerance and experienced anxiety, depression, or sleep disturbances. The prevalence of accompanying problems varies according to age and gender.

Fine particulate matter (FPM) is a major component of air pollution and has emerged as a significant global health concern owing to its adverse health effects. Previous studies have investigated the correlation between bone health and FPM through cohort or review studies. However, the effects of FPM exposure on bone health are poorly understood. This study aimed to investigate the effects of FPM on bone health and elucidate these effects in vitro and in vivo using mice. Micro-CT analysis in vivo revealed FPM exposure decreased bone mineral density, trabecular bone volume/total volume ratio, and trabecular number in the femurs of mice, while increasing trabecular separation. Histological analysis showed that the FPM-treated group had a reduced trabecular area and an increased number of osteoclasts in the bone tissue. Moreover, in vitro studies revealed that low concentrations of FPM significantly enhanced osteoclast differentiation. These findings further support the notion that short-term FPM exposure negatively impacts bone health, providing a foundation for further research on this topic.

Purpose: This study assessed the reproducibility and clinical value of the vascular index (VI), derived from superb microvascular imaging (SMI) using Doppler ultrasonography, for evaluating renal function in transplanted kidneys. Methods: This retrospective study included 63 renal transplant patients who underwent grayscale and Doppler ultrasonography with SMI from January 2022 to February 2023. The VI of the transplanted kidneys was measured using three methods (VI_box, VI_F1, VI_F2). The VI was compared across chronic kidney disease (CKD) groups categorized by estimated glomerular filtration rate (eGFR) and Kidney Disease: Improving Global Outcomes (KDIGO) CKD risk groups based on eGFR and albuminuria. The correlation between VI and renal function was evaluated. Univariate and multivariate linear regression analyses were used to identify predictors of eGFR. Results: Significant differences in VI were observed among CKD groups based on eGFR (VI_box, P=0.001; VI_F1, P<0.001; VI_F2, P<0.001) and KDIGO CKD groups based on eGFR and albuminuria (VI_box, P=0.039; VI_F1, P=0.001; VI_F2, P<0.001). VI_F1 and VI_F2 demonstrated moderate/high correlations with eGFR (r=0.627, P<0.001 and r=0.657, P<0.001, respectively) and serum creatinine (r=-0.626, P<0.001 and r=-0.649, P<0.001, respectively). VI_box moderately correlated with eGFR (r=0.445, P<0.001). Multivariate regression identified the urine albumincreatinine ratio (ACR) (adjusted odds ratio [aOR], 1.122; 95% confidence interval [CI], -0.007 to, 0.000; P=0.030) and VI_F2 (aOR, 1.114; 95% CI, 0.466 to 1.235; P<0.001) were independently associated with eGFR. Conclusion The VI measured by drawing a region of interest along the border of the transplanted kidney in SMI (VI_F2) is highly reproducible and correlates well with eGFR. Both VI_F2 and ACR independently predict eGFR.

An enlarged retrocrural mass was incidentally discovered in a 79-year-old male patient. Preoperative chest computed tomography and thoracolumbar junction spine magnetic resonance imaging indicated the possibility of a paraganglioma, Castleman disease, or neurogenic tumor. Due to the large size of the tumor, malignancy could not be ruled out, and we decided to perform surgery for diagnostic and therapeutic purposes. Video-assisted thoracoscopic surgery was safely performed, and histopathological examination revealed a capillary hemangioma.

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.

Three-dimensional(3D)printing technology represents an additive manufacturing process wherein computer-aided designs are materialized through the sequential layering of materials by 3D printers, culminating in the formation of complete objects. Since its inception, this technology has found extensive application across various clinical domains, notably enhancing outcomes in surgical assistance. Recently, the utilization of 3D printing in ophthalmic plastic surgery has gained momentum, with researchers conducting numerous valuable explorations into the design of ophthalmic plastic surgeries, the development of surgical fillers for ophthalmic plastic orbital conditions, and the customized design of auxiliary devices for bothoncological and non-oncological lesions. Despite the majority of these studies being confined to the conceptual design phase or limited to case studies, 3D printing technology has demonstrated unparalleled advantages in elevating therapeutic efficacy and surgical precision. To encapsulate the current state and future research directions of 3D printing technology within the realm of ophthalmic plastic surgery, this article aims to review its applications in this field, with the intention of providing a reference for pertinent clinical investigations.

Immobilized enzyme-based enzyme electrode biosensors, characterized by high sensitivity and efficiency, strong specificity, and compact size, demonstrate broad application prospects in life science research, disease diagnosis and monitoring, etc. Immobilization of enzyme is a critical step in determining the performance (stability, sensitivity, and reproducibility) of the biosensors. Random immobilization (physical adsorption, covalent cross-linking, etc.) can easily bring about problems, such as decreased enzyme activity and relatively unstable immobilization. Whereas, directional immobilization utilizing amino acid residue mutation, affinity peptide fusion, or nucleotide-specific binding to restrict the orientation of the enzymes provides new possibilities to solve the problems caused by random immobilization. In this paper, the principles, advantages and disadvantages and the application progress of enzyme electrode biosensors of different directional immobilization strategies for enzyme molecular sensing elements by specific amino acids (lysine, histidine, cysteine, unnatural amino acid) with functional groups introduced based on site-specific mutation, affinity peptides (gold binding peptides, carbon binding peptides, carbohydrate binding domains) fused through genetic engineering, and specific binding between nucleotides and target enzymes (proteins) were reviewed, and the application fields, advantages and limitations of various immobilized enzyme interface characterization techniques were discussed, hoping to provide theoretical and technical guidance for the creation of high-performance enzyme sensing elements and the manufacture of enzyme electrode sensors.

Collagen is a major structural protein in the matrix of animal cells and the most widely distributed and abundant functional protein in mammals. Collagen’s good biocompatibility, biodegradability and biological activity make it a very valuable biomaterial. According to the source of collagen, it can be broadly categorized into two types: one is animal collagen; the other is recombinant collagen. Animal collagen is mainly extracted and purified from animal connective tissues by chemical methods, such as acid, alkali and enzyme methods, etc. Recombinant collagen refers to collagen produced by gene splicing technology, where the amino acid sequence is first designed and improved according to one’s own needs, and the gene sequence of improved recombinant collagen is highly consistent with that of human beings, and then the designed gene sequence is cloned into the appropriate vector, and then transferred to the appropriate expression vector. The designed gene sequence is cloned into a suitable vector, and then transferred to a suitable expression system for full expression, and finally the target protein is obtained by extraction and purification technology. Recombinant collagen has excellent histocompatibility and water solubility, can be directly absorbed by the human body and participate in the construction of collagen, remodeling of the extracellular matrix, cell growth, wound healing and site filling, etc., which has demonstrated significant effects, and has become the focus of the development of modern biomedical materials. This paper firstly elaborates the structure, type, and tissue distribution of human collagen, as well as the associated genetic diseases of different types of collagen, then introduces the specific process of producing animal source collagen and recombinant collagen, explains the advantages of recombinant collagen production method, and then introduces the various systems of expressing recombinant collagen, as well as their advantages and disadvantages, and finally briefly introduces the application of animal collagen, focusing on the use of animal collagen in the development of biopharmaceutical materials. In terms of application, it focuses on the use of animal disease models exploring the application effects of recombinant collagen in wound hemostasis, wound repair, corneal therapy, female pelvic floor dysfunction (FPFD), vaginal atrophy (VA) and vaginal dryness, thin endometritis (TE), chronic endometritis (CE), bone tissue regeneration in vivo, cardiovascular diseases, breast cancer (BC) and anti-aging. The mechanism of action of recombinant collagen in the treatment of FPFD and CE was introduced, and the clinical application and curative effect of recombinant collagen in skin burn, skin wound, dermatitis, acne and menopausal urogenital syndrome (GSM) were summarized. From the exploratory studies and clinical applications, it is evident that recombinant collagen has demonstrated surprising effects in the treatment of all types of diseases, such as reducing inflammation, promoting cell proliferation, migration and adhesion, increasing collagen deposition, and remodeling the extracellular matrix. At the end of the review, the challenges faced by recombinant collagen are summarized: to develop new recombinant collagen types and dosage forms, to explore the mechanism of action of recombinant collagen, and to provide an outlook for the future development and application of recombinant collagen.