Cemental tear is a rare and indetectable condition unless obvious clinical signs present with the involvement of surrounding periodontal and periapical tissues. Due to its clinical manifestations similar to common dental issues, such as vertical root fracture, primary endodontic diseases, and periodontal diseases, as well as the low awareness of cemental tear for clinicians, misdiagnosis often occurs. The critical principle for cemental tear treatment is to remove torn fragments, and overlooking fragments leads to futile therapy, which could deteriorate the conditions of the affected teeth. Therefore, accurate diagnosis and subsequent appropriate interventions are vital for managing cemental tear. Novel diagnostic tools, including cone-beam computed tomography (CBCT), microscopes, and enamel matrix derivatives, have improved early detection and management, enhancing tooth retention. The implementation of standardized diagnostic criteria and treatment protocols, combined with improved clinical awareness among dental professionals, serves to mitigate risks of diagnostic errors and suboptimal therapeutic interventions. This expert consensus reviewed the epidemiology, pathogenesis, potential predisposing factors, clinical manifestations, diagnosis, differential diagnosis, treatment, and prognosis of cemental tear, aiming to provide a clinical guideline and facilitate clinicians to have a better understanding of cemental tear.
Humans ; Dental Cementum/injuries* ; Consensus ; Diagnosis, Differential ; Cone-Beam Computed Tomography ; Tooth Fractures/therapy*

Coronavirus-related diseases pose a significant challenge to the global health system. Given the diversity of coronaviruses and the unpredictable nature of disease outbreaks, the traditional "one bug, one drug" paradigm struggles to address the growing number of emerging crises. Therefore, there is an urgent need for therapeutic agents with broad-spectrum anti-coronavirus activity. Here, we provide evidence that ATV006, an anti-SARS-CoV-2 nucleoside analog targeting RNA-dependent RNA polymerase (RdRp), has broad antiviral activity against human and animal coronaviruses. Using mouse hepatitis virus (MHV) and human coronavirus NL63 (HCoV-NL63) as a model, we show that ATV006 has potent prophylactic and therapeutic activity against murine coronavirus infection in vivo. Remarkably, ATV006 successfully inhibits viral replication in mice even when administered 96 h after infection. Due to its oral bioavailability and potency against multiple coronaviruses, ATV006 has the potential to become a useful antiviral agent against SARS-CoV-2 and other circulating and emerging coronaviruses in humans and animals.

Osteoscarcopenia (OS) is a common degenerative syndrome in the elderly, which is caused by a decrease in both bone and muscle mass during the aging process, leading to osteoporosis and sarcopenia, a decrease in body balance, and a risk of falls and fractures, posing a serious threat to the quality of life and lifespan of the elderly. Osteoskeletal dystrophy increases with age, and its occurrence is higher in females than that in males. At present, there is no unified diagnostic standard, making it impossible to achieve early detection and intervention. The commonly used diagnostic methods include quantitative computed tomography (CT), magnetic resonance imaging (MRI), dual energy X-ray absorptiometry (DXA), muscle mass bioelectrical impedance analysis (BIA), as well as daily gait speed (UGS), short physical performance battery (SPPB), timed start test (TUG), and biochemical evaluation indicators to improve early diagnosis and screening. Due to the fact that both bones and muscles belong to the motor system, osteoporosis and sarcopenia share common pathogenic factors in genetics, endocrine, paracrine, and fat infiltration, which interact and regulate each other, inducing the occurrence of osteoscarcopenia. Osteoporosis and sarcopenia, two age-related diseases, share the same pathogenesis and regulatory pathways, as well as common drug targets. For example: somatostatin α‑actin-3, peroxisome proliferator activated receptor γ coactivation factor-1α (PGC-1α), myocyte enhancer factor-2 (MEF2C), sterol regulatory element binding transcription factor 1 (SREBF1), protoadhesion 7 (PCDH7) and methyltransferase like 21C (METTL21C), osteocalcin and bone derived bone factor gap junction connexin 43 (Cx43), growth hormone (GH), sex hormones, and diseases (such as tumors, diabetes, polycystic ovary syndrome, cardiovascular disease, anemia, disability, inflammatory disease), aging, nutrition, and poor living habits are closely related to osteosarcopenia. Osteoporosis is characterized by low bone mass and microstructural degeneration of bone tissue, while sarcopenia is characterized by loss of muscle mass, strength, and function, both of which often coexist in the elderly population. Exercise regulates muscle and skeletal cytokines such as myostatin (MSTN) and irisinβ‑aminoisobutyric acid (BAIBA), brain derived neutrophil factor (BDNF), interleukin, prostaglandin E2, Wnt, osteocalcin (OCN), and transforming growth factor‑β (TGF‑β) and receptor activator of NF-κB ligand (RANKL) interfere with each other to prevent and treat osteoscarcopenia. Wnt/β‑catenin signaling pathway can simultaneously regulate the growth and metabolism of bones and muscles, and promote osteoblast proliferation, maturation, and mineralization by increasing OPG/RANKL, which is beneficial for bone mass increase and induces proliferation of muscle satellite cells, stimulating and promoting increased muscle synthesis. NF‑κB pathway is the main regulatory factor for inflammation mediated muscle atrophy. Meanwhile, NF‑κB DNA can participate in RANKL inducing osteoclast differentiation in bone tissue, thereby reducing bone mass. Although exercise and nutrition can improve the symptoms of osteoporosis, they cannot be completely cured, and there are no specific drugs in clinical practice that can cure sarcopenia. Because osteoscarcopenia has a common crosstalk mechanism in the aging process, it is of great significance to prevent osteoscarcopenia by improving bone mass and muscle content through exercise, nutrition, and medication.

In order to standardize the clinical diagnosis and treatment of upper airway cough syndrome (UACS) for children in China, Dongzhimen Hospital of Beijing University of Chinese Medicine and Affiliated Hospital of Liaoning University of Traditional Chinese Medicine initiated the development of this Traditional Chinese Medicine Diagnosis and Treatment Guidelines for Children with Upper Airway cough Syndrome based on evidence-based medical evidence. This guideline will process registration, write a plan, and develop relevant processes and writing norms, develop and publish official documents. This plan mainly introduces the scope of the guidelines, the purpose and significance, the composition of the guidelines working group, the management of conflicts of interest, the collection, selection and determination of clinical problems, the retrieval, screening and rating of evidence, and the consensus of recommendations. Registration information: This study has been registered in the international practice guidelines registry platform with the registration code of PREPARE-2023CN087.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Objective: Recent studies indicate that 3 morphological types of atlanto-occipital joint (AOJ) exist in the craniovertebral junction and are associated with type II basilar invagination (BI) and atlanto-occipital instability. However, the actual biomechanical effects remain unclear. This study aims to investigate biomechanical differences among AOJ types I, II, and III, and provide further evidence of atlanto-occipital instability in type II BI. Methods: Models of bilateral AOJ containing various AOJ types were created, including I-I, I-II, II-II, II-III, and III-III models, with increasing AOJ dysplasia across models. Then, 1.5 Nm torque simulated cervical motions. The range of motion (ROM), ligament and joint stress, and basion-dental interval (BDI) were analyzed. Results: The C0–1 ROM and accompanying rotational ROM increased progressively from model I-I to model III-III, with the ROM of model III-III showing increases between 27.3% and 123.8% indicating ultra-mobility and instability. In contrast, the C1–2 ROM changes were minimal. Meanwhile, the stress distribution pattern was disrupted; in particular, the C1 superior facet stress was concentrated centrally and decreased substantially across the models. The stress on the C0–1 capsule ligament decreased during cervical flexion and increased during bending and rotating loading. In addition, BDI gradually decreased across the models. Further analysis revealed that the dens showed an increase of 110.1% superiorly and 11.4% posteriorly, indicating an increased risk of spinal cord impingement. Conclusion Progressive AOJ incongruity critically disrupts supportive tissue loading, enabling incremental atlanto-occipital instability. AOJ dysplasia plays a key biomechanical role in the pathogenesis of type II BI.

Hyperkalemia is one of the common ion metabolism disorders in clinical practice. Hyperkalemia is defined as serum potassium higher than 5.0 mmol/L according to the guidelines at home and abroad. Acute severe hyperkalemia can cause serious consequences, such as flaccid paralysis, fatal arrhythmia, and even cardiac arrest. The use of renin-angiotensin- aldosterone system inhibitors, β-blockers and diuretics, low-sodium and high-potassium diets, and the presence of related comorbidities increase the occurrence of hyperkalemia. Hyperkalemia risk exist in all clinical departments, but there is a lack of a standardization in the management of multi- department cooperation in hospital. Therefore, a number of domestic nephrology and cardiology department experts have discussed a management model for multi-department cooperation in hyperkalemia, formulating the management standard on hospital evaluation, early warning, diagnosis and treatment, and process. This can promote each department to more effectively participate in nosocomial hyperkalemia diagnosis and treatment, as well as the long-term management of chronic hyperkalemia, improving the quality of hyperkalemia management in hospital.