The three-dimensional (3D) printed bone tissue repair guide scaffold is considered a promising method for treating bone defect repair. In this experiment, chitosan (CS), sodium alginate (SA), and mineralized collagen (MC) were combined and 3D printed to form scaffolds. The experimental results showed that the printability of the scaffold was improved with the increase of chitosan concentration. Infrared spectroscopy analysis confirmed that the scaffold formed a cross-linked network through electrostatic interaction between chitosan and sodium alginate under acidic conditions, and X-ray diffraction results showed the presence of characteristic peaks of hydroxyapatite, indicating the incorporation of mineralized collagen into the scaffold system. In the in vitro collagen release experiments, a weakly alkaline environment was found to accelerate the release rate of collagen, and the release amount increased significantly with a lower concentration of chitosan. Cell experiments showed that scaffolds loaded with mineralized collagen could significantly promote cell proliferation activity and alkaline phosphatase expression. The subcutaneous implantation experiment further verified the biocompatibility of the material, and the implantation of printed scaffolds did not cause significant inflammatory reactions. Histological analysis showed no abnormal pathological changes in the surrounding tissues. Therefore, incorporating mineralized collagen into sodium alginate/chitosan scaffolds is believed to be a new tissue engineering and regeneration strategy for achieving enhanced osteogenic differentiation through the slow release of collagen.
Chitosan/chemistry* ; Alginates/chemistry* ; Tissue Scaffolds/chemistry* ; Printing, Three-Dimensional ; Osteogenesis ; Collagen/chemistry* ; Cell Differentiation ; Animals ; Tissue Engineering/methods* ; Cell Proliferation ; Biocompatible Materials ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry*

We have isolated an intestinal probiotic strain, Pediococcus acidilactici HRQ-1. To improve its gastrointestinal fluid tolerance, transportation and storage stability, and slow-release properties, we employed the extrusion method to prepare the microcapsules with P. acidilactici HRQ-1 as the core material and sodium alginate and chitosan as the wall material. The optimal conditions for preparing the microcapsules were determined by single factor and orthogonal tests, and the optimal ratio was determined by taking the embedding rate, survival rate, storage stability, gastrointestinal fluid tolerance, and release rate as the evaluation indexes. The results showed that under the optimal embedding conditions, the embedding rate reached (89.60±0.02)%. Under the optimal formula of freeze-drying protective agent, the freeze-drying survival rate reached (76.42±0.13)%, and the average size of the microcapsules produced was (1.16±0.03) mm. The continuous gastrointestinal fluid simulation experiments confirmed that the microcapsules ensured the viable bacterial count and can slowly release bacteria in the intestinal fluid. The curve of the viable bacterial count during storage at 4 ℃ and room temperature indicated that the prepared microcapsules achieved strains' live number protection. The formula and preparation process of P. acidilactici microcapsules may provide a technological reserve for the preparation of more live bacterial drugs in the future.
Pediococcus acidilactici/chemistry* ; Probiotics/chemistry* ; Capsules/chemistry* ; Alginates/chemistry* ; Chitosan/chemistry* ; Drug Compounding/methods* ; Glucuronic Acid/chemistry* ; Hexuronic Acids/chemistry* ; Freeze Drying

In the present study, a gastric retention floating system for Brucea javanica oil, composed of alginate and carrageenan, was prepared using ionotropic gelation. Parameters for floatability, drug load, encapsulation efficiency, bead morphology, in vitro release, and in vivo gastric retention were evaluated. The optimized formulation via Box-Behnken design consisted of 1.7% alginate (W/V), 1.02% carrageenan (W/V), 1.4% CaCO (W/V), and a gelling bath of pH 0.8. The alginate-carrageenan-Brucea javanica oil beads had a porous structure and exhibited up to 24 h of in vitro floatability with a load capacity of 45%-55% and an encapsulation efficiency of 70%-80%. A 6-h sustained release was observed in vitro. The beads had a prolonged gastric retention (> 60% at 6 h) in fasted rats, compared to non-floating beads (15% at 6 h), as measured by gamma scintigraphy with single-photon emission tomography/computed tomography (SPET/CT). In conclusion, the alginate-carrageenan-Brucea javanica oil system showed enhanced oil encapsulation efficiency, excellent floating and gastric retention abilities, and a favorable release behavior.
Alginates ; chemistry ; Animals ; Biological Availability ; Brucea ; chemistry ; Carrageenan ; chemistry ; Delayed-Action Preparations ; administration & dosage ; chemistry ; pharmacokinetics ; Drug Carriers ; chemistry ; Drug Delivery Systems ; methods ; Drug Evaluation, Preclinical ; Gastric Mucosa ; metabolism ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Microspheres ; Plant Oils ; administration & dosage ; chemistry ; pharmacokinetics ; Rats ; Rats, Sprague-Dawley

This study was to explore a better three-dimensional (3-D) culture method of chondrocyte. The interpenetrating network (IPN) gel beads were developed through a photo-cross linking reaction with mixed barium ions and calcium ions at the ratio of 5:5 with the methacrylic alginate (MA), which was a chemically conjugated alginate with methacrylic groups. The second generation of primary cartilage cells was encapsulated in the MA gel beads for three weeks. In the designated timing, HE stain, Alamar blue method and Scanning electron microscopic were used to determine the cartilage cells growth, proliferation and the cell distribution in the scaffolds, respectively. The expression of type II collagen was investigated by an immunohistochemistry assay and the glycosaminoglycan content was quantitatively evaluated with the spectrophotometry of 1, 9 dimethylene blue assay. Compared to the alginate control group, the deposition of glycosaminoglycan was significantly upregulated in IPN-MA gel beads with higher cell proliferation. The secretion of extracellular matrix and proliferation of chondrocyte in methacrylic alginate gel beads were higher than that in Alginate beads. Cells were able to attach, to grow well on the scaffolds under scanning electron microscopy. The result of immunohistochemistry staining of collagen type II was positive, confirming the maintenance of chondrocyte phenotype in methacrylic alginate gel beads. This study shows a great potential for three-dimensional culture of cartilage.
Alginates ; chemistry ; Barium ; chemistry ; Calcium ; chemistry ; Cartilage ; cytology ; Cations ; Cell Culture Techniques ; instrumentation ; Cells, Cultured ; Chondrocytes ; cytology ; Collagen Type II ; chemistry ; Glucuronic Acid ; chemistry ; Glycosaminoglycans ; chemistry ; Hexuronic Acids ; chemistry ; Metals ; chemistry ; Microscopy, Electron, Scanning

BACKGROUNDInjectable three-dimensional (3D) scaffolds have the advantages of fluidity and moldability to fill irregular-shaped defects, simple incorporation of bioactive factors, and limited surgical invasiveness. Adipose-derived stem cells (ADSCs) are multipotent and can be differentiated toward nucleus pulposus (NP)-like cells. A hypoxic environment may be important for differentiation to NP-like cells because the intervertebral disc is an avascular tissue. Hence, we investigated the induction effects of hypoxia and an injectable 3D chitosan-alginate (C/A) gel scaffold on ADSCs.

METHODSThe C/A gel scaffold consisted of medical-grade chitosan and alginate. Gel porosity was calculated by liquid displacement method. Pore microstructure was analyzed by light and scanning electron microscopy. ADSCs were isolated and cultured by conventional methods. Passage 2 BrdU-labeled ADSCs were co-cultured with the C/A gel. ADSCs were divided into three groups (control, normoxia-induced, and hypoxia-induced groups). In the control group, cells were cultured in 10% FBS/DMEM. Hypoxia-induced and normoxia-induced groups were induced by adding transforming growth factor-β1, dexamethasone, vitamin C, sodium pyruvate, proline, bone morphogenetic protein-7, and 1% ITS-plus to the culture medium and maintaining in 2% and 20% O2, respectively. Histological and morphological changes were observed by light and electron microscopy. ADSCs were characterized by flow cytometry. Cell viability was investigated by BrdU incorporation. Proteoglycan and type II collagen were measured by safranin O staining and the Sircol method, respectively. mRNA expression of hypoxia-inducing factor-1α (HIF-1α), aggrecan, and Type II collagen was determined by reverse transcription-polymerase chain reaction.

RESULTSC/A gels had porous exterior surfaces with 80.57% porosity and 50-200 üm pore size. Flow cytometric analysis of passage 2 rabbit ADSCs showed high CD90 expression, while CD45 expression was very low. The morphology of induced ADSCs resembled that of NP cells. BrdU immunofluorescence showed that most ADSCs survived and proliferated in the C/A gel scaffold. Scanning electron microscopy showed that ADSCs grew well in the C/A gel scaffold. ADSCs in the C/A gel scaffold were positive for safranin O staining. Hypoxia-induced and normoxia-induced groups produced more proteoglycan and Type II collagen than the control group (P < 0.05). Proteoglycan and Type II collagen levels in the hypoxia-induced group were higher than those in the normoxia-induced group (P < 0.05). Compared with the control group, higher mRNA expression of HIF-1α, aggrecan, and Type II collagen was detected in hypoxia-induced and normoxiainduced groups (P < 0.05). Expression of these genes in the hypoxia-induced group was significantly higher than that in the normoxia-induced group (P < 0.05).

CONCLUSIONADSCs grow well in C/A gel scaffolds and differentiate toward NP-like cells that produce the same extracellular matrix as that of NP cells under certain induction conditions, which is promoted in a hypoxic state.

Adipose Tissue ; cytology ; Alginates ; chemistry ; Animals ; Cell Differentiation ; physiology ; Cells, Cultured ; Chitosan ; chemistry ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Rabbits ; Stem Cells ; cytology ; physiology ; Tissue Engineering ; methods ; Tissue Scaffolds ; chemistry

The cis-epoxysuccinate hydrolase (CESH) from Rhizobium strain BK-20 is the key enzyme for L(+)-tartaric acid production. To establish a highly efficient and stable production process, we first optimized the enzyme production from Rhizobium strain BK-20, and then developed an immobilized cell-culture process for sustained production of L(+)-tartaric acid. The enzyme activity of free cells reached (3 498.0 +/- 142.6) U/g, and increased by 643% after optimization. The enzyme activity of immobilized cells reached (2 817.2 +/- 226.7) U/g, under the optimal condition with sodium alginate as carrier, cell concentration at 10% (W/V) and gel concentration at 1.5% (W/V). The immobilized cells preserved high enzyme activity and normal structure after 10 repeated batches. The conversion rate of the substrate was more than 98%, indicating its excellent production stability.
Alginates ; chemistry ; Cells, Immobilized ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Hydrolases ; metabolism ; Rhizobium ; enzymology ; metabolism ; Tartrates ; metabolism

Starting from the form of red blood cells and the hematocrit (Hct, about 45 vol% of whole blood), we tried to prepare a kind of microspheres suspension to imitate non-Newtonian fluid property of whole blood, exploring its potentiality to be applied in blood viscosity quality control substance. In our study, we produced Ca-alginate hydrogel microspheres using emulsion polymerization, then we suspended the microspheres in 0.9 wt% NaCl solution to obtain a kind of liquid sample with the microspheres taking 45% volume. Then we used two types of viscometers to measure and analyse the changes of sample viscosity at different shear rate. We observed the forms of Ca-alginate hydrogel microspheres with microscope, and found them to be relatively complete, and their diameters to be normally distributed. Diameters of about 90% of the microspheres were distributed in a range from 6 to 22 micron. The samples were examined with viscometer FASCO-3010 and LG-R-80c respectively, both of which have shown a shear-thinning effect. After 5-week stability test, the CV of viscosity results corresponding to the two instruments were 7.3% to 13.8% and 8.9% to 14.2%, respectively. Although some differences existed among the results under the same shear rate, the general variation trends of the corresponding results were consistent, so the sample had the potentiality to be widely used in calibrating a different type of blood viscometer.
Alginates ; chemistry ; Blood Viscosity ; Calcium ; chemistry ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Humans ; Hydrogel, Polyethylene Glycol Dimethacrylate ; chemistry ; Microspheres ; Plasma Substitutes ; chemistry ; Rheology ; instrumentation ; Suspensions ; chemistry

To study the angiogenic activity of amphoteric brush-type copolymer complex of alginate-graft-PEI/pVEGF (Alg-g-PEI/pVEGF) in vivo, we evaluated the toxicity of Alg-g-PEI/pVEGF complexes to rMSCs and zebra fish first. Then, we used gel retardation assay to investigate the protection of complex to pDNA against DNase I, serum and heparin. For in vivo study, we evaluated the angiogenic activity of Alg-g-PEI/pVEGF complexes by using CAM and zebra fish as animal models, PEI 25K/pVEGF and saline as positive and negative controls. Our results show that Alg-g-PEI protected pVEGF from enzymolysis and displacement of heparin in some degree, and its complexes with pVEGF were less toxic to rMSCs and zebra fish. Alg-g-PEI/pVEGF complexes induced significant angiogenesis, which was dosage-dependent. In CAM, when the dosage of pVEGF was 2.4 microg/CAM, Alg-g-PEI group achieved the maximum of angiogenesis, and the area ratio of vessel to the total surface was 44.04%, which is higher than PEI 25K group (35.90%) and saline group (24.03%) (**P < 0.01). In zebra fish, the angiogenesis increased with the increase of N/P ratios of Alg-g-PEI/pVEGF complexes in our studied range; when N/P ratio was 110, the optimal angiogenesis was obtained with vessel length of 1.11 mm and area of 1.70 x 10(3) pixels, which is higher than saline group (0.69 mm and 0.94 x 10(3) pixels) (**P < 0.01) and PEI 25k group (0.82 mm and 1.11 x 10(3) pixels) (**P < 0.01). Our results demonstratethat Alg-g-PEI/pVEGF significantly induces angiogenesis in CAM and zebra fish, and has a great potential in therapeutic angiogenesis.
Alginates ; chemistry ; Angiogenesis Inducing Agents ; pharmacology ; Animals ; Chick Embryo ; Drug Carriers ; chemistry ; Genetic Vectors ; genetics ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Mesenchymal Stromal Cells ; cytology ; drug effects ; Polyethyleneimine ; chemistry ; Polymers ; pharmacology ; toxicity ; Vascular Endothelial Growth Factor A ; chemistry ; Zebrafish

To determine the optimum process for preparing Cinnamomi Cortex oil microspheres based on porous silicon dioxide. After porous silica dioxide adsorbed Cinnamomi Cortex oil, Cinnamomi Cortex oil microspheres were prepared by the dropping method, with sodium alginate as the skeleton materials. The preparation process was optimized through the L(9) (3(4)) orthogonal test design, with microspheres diameter, distribution, drug loading capacity and entrapment efficiency as the indexes. The cinnamon volatile oil microspheres were characterized by scanning election microscope (SEM), thermogravimetric analysis (TGA), and infrared (IR) spectroscopy. An in vitro drug release experiment was conducted. The results showed that the microspheres prepared with the optimal process parameters were in good shape, even in size and good in dispersibility, with an average diameter of 1.61 mm, an average drug loading capacity of 32.85%, an entrapment efficiency of 94.79%. The maximum drug release capacity reached 72.6%, 95.0%, 97.4%, respectively, under pH 4.0, 6.8, 7.4 in 6 hours. Meanwhile, microsphere generation was tested by IR, TGA and other methods. The established optimum process for preparing Cinnamomi Cortex oil microspheres was proved to be stable and practical.
Alginates ; chemistry ; Chemistry, Pharmaceutical ; Cinnamomum ; chemistry ; Drug Carriers ; chemistry ; Drugs, Chinese Herbal ; chemistry ; Glucuronic Acid ; chemistry ; Hexuronic Acids ; chemistry ; Microspheres ; Particle Size ; Porosity ; Silicon Dioxide ; chemistry ; Solubility

Silk fibroin (SF)/sodium alginate (SA) hydrogels can be used as drug injection materials. Homogenate was prepared by centrifugation of the pig myocardial extracellular matrix (PMM) and its modification of SF gel material. This paper observes and compares the different components SF, SF/SA, SF/SA/PMM to illustrate the SF/SA/PMM ternary material as a drug delivery composition material. This ternary material can shorten the gel time, and can make the gel form to be maintained better. Meanwhile, it makes the internal structure of the gel looser so that the hole wall becomes thinner and more conducive to the drug release. In addition, it has good biocompatibility proved by pathological analysis, and is able to enhance the mesenchymal stem cells growth activity, which has great significance in carrying out drug control release.
Alginates ; chemical synthesis ; chemistry ; Animals ; Biocompatible Materials ; chemical synthesis ; Delayed-Action Preparations ; chemistry ; Drug Carriers ; chemical synthesis ; chemistry ; Extracellular Matrix ; chemistry ; Fibroins ; chemical synthesis ; chemistry ; Glucuronic Acid ; chemical synthesis ; chemistry ; Hexuronic Acids ; chemical synthesis ; chemistry ; Hydrogels ; chemical synthesis ; chemistry ; Myocardium ; chemistry ; Rats ; Swine ; Tissue Extracts ; chemistry