Objective To evaluate the efficacy and safety of different surgical approaches for extracting high-positioned supernumerary teeth in the maxillary anterior midline region.Three surgical methods,the labial approach,the palatal approach,and a longitudinal incision beside the upper lip frenum were compared.Methods A total of 102 patients were recruited from the Department of Oral and Maxillofacial Surgery at the Affiliated Stomatological Hospital of Anhui Medical University between January and September 2024.They were randomly assigned via a random-digit table to three groups:the labial approach group(n=32),the palatal approach group(n=34),and the longitudinal incision beside the upper lip frenum group(n=36).Operation time,bone removal volume,post-operative midfacial swelling,degree of pain,and patient satisfaction across the three groups were recorded and compared.Results The average operation time in the labial approach group((20.50±3.02)min)and the longitudinal incision group((21.66±2.31)min)were both significantly shorter than that in the palatal approach group((29.19±3.40)min).In contrast,the palatal approach group demonstrated markedly lower postoperative swelling and pain scores(P＜0.05),along with the highest patient satisfaction,as reflected in the OHIP-14 scale.However,the palatal approach required the greatest bone removal volume,measuring(91.19±9.86)mm3.Conclusion Despite the palatal approach yielding superior outcomes in terms of postoperative pain control,swelling reduction,and patient satisfaction,it necessitated longer operation time and involved greater bone removal.Meanwhile,the labial approach and the longitudinal incision beside the upper lip frenum were comparable in all measured parameters,showing no statistically significant differences.Therefore,when extracting high midline impacted teeth in the maxillary anterior region,the choice of surgical approach should balance safety,minimal invasiveness,and patient satisfaction.

Objective To evaluate the efficacy and safety of different surgical approaches for extracting high-positioned supernumerary teeth in the maxillary anterior midline region.Three surgical methods,the labial approach,the palatal approach,and a longitudinal incision beside the upper lip frenum were compared.Methods A total of 102 patients were recruited from the Department of Oral and Maxillofacial Surgery at the Affiliated Stomatological Hospital of Anhui Medical University between January and September 2024.They were randomly assigned via a random-digit table to three groups:the labial approach group(n=32),the palatal approach group(n=34),and the longitudinal incision beside the upper lip frenum group(n=36).Operation time,bone removal volume,post-operative midfacial swelling,degree of pain,and patient satisfaction across the three groups were recorded and compared.Results The average operation time in the labial approach group((20.50±3.02)min)and the longitudinal incision group((21.66±2.31)min)were both significantly shorter than that in the palatal approach group((29.19±3.40)min).In contrast,the palatal approach group demonstrated markedly lower postoperative swelling and pain scores(P＜0.05),along with the highest patient satisfaction,as reflected in the OHIP-14 scale.However,the palatal approach required the greatest bone removal volume,measuring(91.19±9.86)mm3.Conclusion Despite the palatal approach yielding superior outcomes in terms of postoperative pain control,swelling reduction,and patient satisfaction,it necessitated longer operation time and involved greater bone removal.Meanwhile,the labial approach and the longitudinal incision beside the upper lip frenum were comparable in all measured parameters,showing no statistically significant differences.Therefore,when extracting high midline impacted teeth in the maxillary anterior region,the choice of surgical approach should balance safety,minimal invasiveness,and patient satisfaction.

Despite decades of research,cancer continues to be a major global health concern.The human mouth appears to be a multiplicity of local environments communicating with other organs and causing diseases via microbes.Nowadays,the role of oral microbes in the development and progression of cancer has received increasing scrutiny.At the same time,bioengineering technology and nanotechnology is growing rapidly,in which the physiological activities of natural bacteria are modified to improve the therapeutic efficiency of cancers.These engineered bacteria were transformed to achieve directed genetic reprogramming,selective functional reorganization and precise control.In contrast to endotoxins produced by typical genetically modified bacteria,oral flora exhibits favorable biosafety characteristics.To outline the current cognitions upon oral microbes,engineered microbes and human cancers,related literatures were searched and reviewed based on the PubMed database.We focused on a number of oral microbes and related mechanisms associated with the tumor microenvironment,which involve in cancer occurrence and development.Whether engineering oral bacteria can be a possible application of cancer therapy is worth consideration.A deeper understanding of the relationship between engineered oral bacteria and cancer therapy may enhance our knowledge of tumor pathogenesis thus providing new insights and strategies for cancer prevention and treatment.

Objective To study the possibility of using cone-beam computed tomography(CBCT)with CTAn software to analyze bone resistance during mandibular third molar extraction surgery.Methods Fifty-three patients who underwent CBCT scans for third molars at the Department of Stomatology from January 1st 2021 to July 31th 2023 were induded,involving a total of 91 mandibular third mo-lars.CTAn software was used to analyze the buccal and lingual bone volume regions around mandibular third molars in CBCT images,assessing three-dimensional bone microstructural parameters.Results Significant differences(P＜0.05)in tissue volume,trabecular bone volume/tissue volume,bone surface/trabecular bone volume,bone surface/tissue volume,and bone mineral density between the buccal and lingual bone volume areas were observed in both the total sample and in stratified analyses based on themesially inclined/verticalmandibular third molar impactionand gender.In high/mid-level mesially inclined and vertical impactions,females showed more significant differences in microstructural parameters of the buccal and lingual bone volume compared to males.Conclusion The inte-gration of CBCT with CTAn software offers a viable method for assessing bone resistance during mandibular third molar extractions.Lin-gual bone exhibits greater bone tissue content,denser trabeculae with smaller tissue volume compared to buccal bone.During mandibu-lar third molar extraction,compressing the buccal alveolar bone helps create trabecular compression space more easily.Additionally,the buccal alveolar bone is more amenable to grinding than the lingual side,thereby achieving a reasonable buccal dislocation of root.For female patients with high/mid-level mesially inclined and vertical impactions of the mandibular third molars,a buccal approach is more advisable to be followed.The evaluation of bone microstructural parameters and accurate determination of bone resistance offer valuable insights for the minimally invasive removal of impacted teeth.

Prosthodontic dentures are used to treat tooth defects,dentition defects and dentition loss,which can restore the appearance and function of the patient's oral cavity.With the advent of the digital age,3D printing technologies have slowly gained widespread popularity.In the field of prosthodontics,3D printing can manufacture materials including resins,waxes,metals,and ceramics.Besides,it can produce fixed,movable,implant dentures and dental models required for dentures.3D printing can produce complicated things with a high material consump-tion rate,simplifying denture manufacture.In addition,the accuracy of 3D printed prosthesis is directly related to the comfort and durability.This article summarizes the process of accuracy of 3D printed dental prosthesis at home and abroad in recent years and provides clues for better 3D printing application.

Objective To investigate the value of a clinical-CT radiomics model in predicting cervical lymph node metastasis(CLNM)of papillary thyroid carcinoma(PTC).Methods A total of 262 cases with PTC confirmed by pathology after surgery were selected.On CT arterial phase images,the PTC was outlined layer by layer via software 3D-slicer to extract CT radiomics features.The least absolute shrinkage and selection operator(LASSO)algorithm was used for dimensionality reduction and feature screening in relation to CLNM.The Mann-Whitney U test or Chi square test was performed to identify clinical parameters significantly associated with CLNM.The statistically significant CT radiomics features and clinical parameters were all selected for the multivariate logistic regression analysis to construct the clinical-CT radiomics model.The predictive efficiency of model was evaluated via the receiver operating characteristic(ROC)curve.Results The clinical-CT radiomics model demonstrated favorable predictive performance in both the training group[area under the curve(AUC)0.804,sensitivity 68.7％,specificity 82.4％]and the validation group(AUC 0.782,sensitivity 84.4％,specificity 61.8％).Conclusion The clinical-CT radiomics model demonstrates significant value in predicting CLNM of PTC,thereby,aiding in the development of personalized clinical plans for cervical lymph node(CLN)dissection.

OBJECTIVETo evaluate the diagnostic value of HGAL and LMO2 expression and compare with CD10 and bcl-6 in follicular lymphoma (FL).

METHODS63 cases of FL were collected from Guangdong General Hospital. The expression of HGAL, LMO2, CD10 and bcl-6 was assessed by immunohistochemistry.

RESULTSThe expression rates of HGAL, LMO2, CD10 and bcl-6 were 98.4% (62/63), 82.5% (52/63), 82.5% (52/63) and 87.3% (55/63), respectively. The expression rate of HGAL was higher than those of LMO2, CD10 and bcl-6, but the differences were not significant (P>0.05). There was no significant difference in HGAL, LMO2 and bcl-6 expression among FL1, FL2 and FL3 cases. The CD10 expression rate of FL1-3A cases was significantly higher than that of FL3B cases(P<0.01).

CONCLUSIONSHGAL and LMO2, especially HGAL, can be used in FL particularly high grade FL as useful germinal center marker.

Adaptor Proteins, Signal Transducing ; metabolism ; Biomarkers, Tumor ; metabolism ; Germinal Center ; Humans ; Immunohistochemistry ; LIM Domain Proteins ; metabolism ; Lymphoma, Follicular ; metabolism ; Neoplasm Proteins ; metabolism ; Neprilysin ; metabolism ; Proto-Oncogene Proteins ; metabolism ; Proto-Oncogene Proteins c-bcl-6 ; metabolism

Objective To evaluated intra-articular injection of TNF-α inhibitors into the sacroiliac joint as an effective and viable alternative. Methods Sixteen patients with documented ankylosing spondylitis (AS), without steroids or disease modifying anti-rheumatic drugs (DMARDs) were performed CT-guided intra-articular injections of etanercept (TNF-α antagonist) at week 0, 4 and 8 (25 mg per dose). Similarly, 20 patients with AS in the control group received systemic etanercept therapy at a dose of 50 mg per week for 8 weeks. All patients were followed up clinically and evaluated periodically. Pathological features of sacroiliitis were observed with light microscopy and immunohistochemistry. Expression of cytokines in joint biopsy samples was estimated by RT-PCR. Image changes of sacroiliitis were observed by SPECT/CT and MRI. Ttest, t'tesr and χ2 Fisher's test were selected. Results All the 16 patients who received intra-articular etanercept, the mean value of radiological nuclide decrease of the SIJ ROI (region of interest) in the SPECT improved significantly after 8 weeks treatment [(1.38±0.16 vs 1.45±0.14) P<0.05] . Bone marrow edema and fat deposition in MRI were relieved significantly after 8 weeks (P<0.05). In 8 patients the expression of TNF-α and TGF-β mRNA in joint tissue decreased significantly after 8 weeks [(0.89±0.06, 0.84±0.05) vs (l.08± 0.19, 1.13±0.33) (P<0.05)]. The occurrence of gynonitis, enthesitis, chondritis, subehondral bony plate destruction, bone marrow inflammation and inflammatory cell index also decreased significantly (P<0.05). Participants given intra-articular injection showed significant clinical improvement after 8 weeks and 12 weeks treatment(P<0.01 ) in BASDAI score [(32±13) mm]. Conclusion This study has shown that intra-articular injection of etanercept in SIJ can improve joint function and quality of life. It has a satisfactory safety profile and is cost effective. This mode of treatment is most beneficial in local arthropathy of recent onset and in those patients who do not tolerate systemic etanercept therapy.