BACKGROUND:Osteoporotic vertebral fractures are the most common complication in patients with osteoporosis.As a new imaging technique,spine magnetic resonance imaging(MRI)is much more sensitive than X-ray film in the diagnosis of osteoporotic vertebral fractures.However,total spine MRI is costly and takes a long time to scan.Therefore,there is no consensus on whether all patients with osteoporotic vertebral fractures need to undergo total spine MRI scan and which patients need to undergo total spine MRI. OBJECTIVE:To analyze the distribution characteristics of vertebral fractures and explore their clinical significance by observing the whole spine MRI data of osteoporotic vertebral fractures patients. METHODS:Data of cases and MRI images of all patients diagnosed with fresh osteoporotic vertebral fractures who visited the Department of Orthopedics,Affiliated Hospital of Southwest Medical University from August 2018 to September 2022 were retrospectively analyzed.903 patients were included in the study based on inclusion and exclusion criteria.General information(age,gender,and body mass index),medical history characteristics(duration of illness,history of trauma surgery,percussion pain area,and pain score)were collected.The characteristics of vertebral fractures were analyzed through whole spine magnetic resonance imaging.Firstly,based on the number of vertebral fractures in patients,they were divided into the single vertebral fracture group(484 cases)and the multi-vertebral fracture group(419 cases),and the differences were analyzed between the two groups.Then,based on whether the farthest interval between the fractured vertebrae was greater than or equal to 5,the multi vertebral fracture group was further divided into two subgroups.Among them,Group A(the farthest interval between the fractured vertebrae was less than 5)contained 306 cases;Group B(with the farthest interval between fractured vertebral bodies greater than 5)included 113 cases.The differences were analyzed between two subgroups. RESULTS AND CONCLUSION:(1)Among 903 patients,419 patients(46.4%)had more than two fractured vertebrae.There were 654 patients(72.4%)with thoracolumbar fractures,and 54 patients(6%)with fractures in the thoracic plus lumbar region and the entire thoracic to lumbar region.In group B,96.5%of patients had multiregional percussion pain.(2)Compared with the patients in the single vertebral fracture group and the multi-vertebral fracture group,there were significant differences in bone mineral density,whether the medical history was greater than or equal to 1 month,the history of low energy injury,and the distribution and number of axial percussion pain areas in the spine during physical examination between the two groups(P<0.05).Age,gender,body mass index,whether there was underlying disease,pain visual analog scale score,whether there was a history of elderly thoracolumbar fracture,and whether there was a history of thoracolumbar surgery,and the number of fractured vertebrae had no statistical significance(P>0.05).(3)There were statistically significant differences between the Groups A and B in bone mineral density,the distribution and quantity of percussion pain area,and the history of low energy injury(P<0.05).There were no significant differences in age,gender,history of old fractures,visual analog scale score,body mass index,whether the medical history was longer than or equal to 1 month,history of underlying diseases,and history of thoracolumbar surgery between the two groups(P>0.05).(4)Patients with multiple low-energy trauma history,history of more than 1 month,multiple percussion pain,and the lower bone mineral density should be alert to the occurrence of multiple vertebral fracture and jump fracture.We recommend the whole spinal MRI for these patients.

ObjectiveTo explore the possible mechanisms of electroacupuncture at Fengchi （GB 20）， Waiguan （TE 5）， and Yanglingquan （GB 34） in treating chronic migraine from the perspective of nociceptive sensitization. MethodsForty SPF-grade SD rats were randomly divided into blank group， model group， electroacupuncture group， electroacupuncture + agonist group， and inhibitor group， with 8 rats in each group. Except for the blank group， rats were injected intraperitoneally with nitroglycerin to establish a chronic migraine rat model. After successful modeling， the electroacupuncture group received electroacupuncture at bilateral "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） for 30 minutes each session. The electroacupuncture + agonist group received the same electroacupuncture treatment and additional injection of protein kinase C （PKC） agonist Phorbol 12-myristate 13-acetate （1.0 ng/μl， 25 μl） via the infraorbital foramen. The inhibitor group received PKC inhibitor Chelerythrine Chloride （1.0 ng/μl， 10 μl） via the infraorbital foramen. The blank group， model group， and inhibitor group underwent restraint for 30 minutes without other interventions. All groups were continuously intervened for 5 days. After the intervention， the nociceptive thresholds （mechanical and thermal pain） of the periorbital area and hind paw were measured. The expression levels of transient receptor potential vanillic acid subtype 1 （TRPV1）， phosphorylated TRPV1 （p-TRPV1）， PKC proteins， Trpv1， Pkc mRNA， and the average fluorescence intensity of transient receptor potential vanillic acid subtype 1 （TRPV1） and PKC in the trigeminal ganglion were detected using Western Blot， real-time fluorescence quantitative PCR， and immunofluorescence methods. ResultsCompared with the blank group， the mechanical and thermal pain thresholds of the periorbital area and hind paw were reduced in the model group， and the protein levels of TRPV1， PKC， p-TRPV1， as well as the mRNA expression of Trpv1 and Pkc， and the average fluorescence intensity of TRPV1 and PKC in the trigeminal ganglion significantly increased （P＜0.05 or P＜0.01）. Compared with the model group， the electroacupuncture group exhibited increased mechanical and thermal pain thresholds in the periorbital and hind paw areas， and decreased protein levels of TRPV1， PKC， p-TRPV1， mRNA expression of Trpv1 and Pkc， and average fluorescence intensity of TRPV1. In the electroacupuncture + agonist group， the average fluorescence intensity of TRPV1 in the trigeminal ganglion decreased. The inhibitor group exhibited increased mechanical pain thresholds in the periorbital area and thermal pain thresholds in the hind paw， along with decreased protein levels of TRPV1， PKC， p-TRPV1， and the average fluorescence intensity of TRPV1 and PKC （P＜0.05 or P＜0.01）. Compared with the electroacupuncture group， the electroacupuncture + agonist group showed an increase in the protein levels of TRPV1， PKC， p-TRPV1， and the mRNA expression of Trpv1 （P＜0.05 or P＜0.01）. ConclusionElectroacupuncture at the "Fengchi" （GB 20）， "Waiguan" （TE 5）， and "Yanglingquan" （GB 34） acupoints can increase the mechanical and thermal pain thresholds in chronic migraine rats and alleviate nociceptive sensitization. The mechanism may be related to the inhibition of PKC/TRPV1 pathway.

Objective: To establish a prediction model for high-risk cardiovascular disease (CVD) among residents aged 35 to 75 years, so as to provide the basis for improving CVD prevention and control measures. Methods: Permanent residents aged 35 to 75 years were selected from Dongcheng District, Beijing Municipality using the stratified random sampling method from 2018 to 2023. Demographic information, lifestyle, waist circumference and blood biochemical indicators were collected through questionnaire surveys, physical examinations and laboratory tests. Influencing factors for high-risk CVD among residents aged 35 to 75 years were identified using a multivariable logistic regression model, and a prediction model for high-risk CVD was established. The predictive effect was evaluated using the receiver operating characteristic (ROC) curve. Results: A total of 6 968 individuals were surveyed, including 2 821 males (40.49%) and 4 147 females (59.51%), and had a mean age of (59.92±9.33) years. There were 1 155 high-risk CVD population, with a detection rate of 16.58%. Multivariable logistic regression analysis showed that gender, age, smoking, central obesity, systolic blood pressure, fasting blood glucose, triglyceride and low-density lipoprotein cholesterol were influencing factors for high-risk CVD among residents aged 35 to 75 years (all P<0.05). The area under the ROC curve of the established prediction model was 0.849 (95%CI: 0.834-0.863), with a sensitivity of 0.693 and a specificity of 0.863, indicating good discrimination. Conclusion The model constructed by eight factors including demographic characteristics, lifestyle and blood biochemical indicators has good predictive value for high-risk CVD among residents aged 35 to 75 years.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.

Objective: To understand the impact of left behind experience on the mental health of secondary vocational school students, so as to provide theoretical basis for the psychological health education of secondary vocational school students. Methods: From September to December in 2019, a total of 3 401 students from Duyun, Guiding and Pingtang County were selected by multi stage cluster random sampling method. Self designed questionnaire and Symptom Check List-90(SCL-90) were used to investigate mental health status. A total of 1 415 left behind students and 1 415 non left behind students were matched by using propensity score matching (PSM). Wilcoxon test and Logistic regression analysis were conducted. Results: Before the matching of propensity score, there were statistically significant differences in the distribution of family structure, mother s educational level, family residence,family harmony and children s past health among the students with or without left behind experience ( χ 2=28.17, 52.40, 96.31, 29.75 , 19.10, P <0.05). After the matching, there were no statistically significant differences in the distribution of the above variables among the students with or without left behind experience ( χ 2=0.02-4.32, P >0.05). Before the matching of propensity scores, there were significant differences in the scores of 10 dimensions of SCL-90, including somatization (1.67,1.58), interpersonal sensitivity (2.00,1.89), anxiety (1.90,1.70), obsessive compulsive symptoms (2.20, 2.10), depression (2.00, 1.85), hostility (1.83, 1.67), terror (1.85, 1.71), paranoia (1.83, 1.67), psychotic (1.70, 1.60) and other (1.85, 1.71) dimensions among secondary vocational school students with or without left behind experience ( Z=-5.15 to -2.84, P <0.05). After propensity score matching, there were significant differences in scores remained only in three factors for interpersonal sensitivity [(2.00(1.56,2.67)，2.00(1.44,2.56)], paranoia [1.83(1.33,2.50)，1.83(1.33,2.33)] and psychoticism [1.70(1.30,2.30)，1.70(1.20,2.20)] in SCL- 90 among secondary vocational students with or without left behind experience ( Z=-2.45, -2.12, -2.23, P <0.05). Conclusion The impact of left behind experience on the mental health of vocational school students is mainly reflected in interpersonal sensitivity, paranoia, and psychoticism, which should be identified as key areas of psychological education for secondary vocational school students.

As a neglected tropical disease, schistosomiasis remains a major public health challenge in underdeveloped areas, notably Africa. Currently, the national schistosomiasis control programmes in Africa mainly depend on foreign aids; however, conventional international aid models have multiple limitations. To enhance the effectiveness and sustainability of global schistosomiasis control programmes, this article proposes a trinity collaboration model based on international rules, China’s experiences and local needs, which is explained with China aid project of schistosomiasis control in Zanzibar as an example. Based on the successful experiences from the national schistosomiasis control programme in China, this model emphasizes the compliance with World Health Organization guidelines and fully considers local actual needs to promote the effectiveness and sustainability of the schistosomiasis control programme through integrating international resources and promoting China’s experience to meet local needs. The successful practice of the China aid project of schistosomiasis control in Zanzibar provides strong evidence that the model is of great theoretical significance and practical value to improve the efficiency of multilateral collaboration and promote global health governance.

Objective To investigate the global burden of visceral leishmaniasis (VL) from 1990 to 2021 and predict the trends in the burden of VL from 2022 to 2035, so as to provide insights into global VL prevention and control. Methods The global age-standardized incidence, prevalence, mortality and disability-adjusted life years (DALYs) rates of VL and their 95% uncertainty intervals (UI) were captured from the Global Burden of Disease Study 2021 (GBD 2021) data resources. The trends in the global burden of VL were evaluated with average annual percent change (AAPC) and 95% confidence interval (CI) from 1990 to 2021, and gender-, age-, country-, geographical area- and socio-demographic index (SDI)-stratified burdens of VL were analyzed. The trends in the global burden of VL were projected with a Bayesian age-period-cohort (BAPC) model from 2022 to 2035, and the associations of age-standardized incidence, prevalence, mortality, and DALYs rates of VL with SDI levels were examined with a smoothing spline model. Results The global age-standardized incidence [AAPC = -0.25%, 95% CI: (-0.25%, -0.24%)], prevalence [AAPC = -0.06%, 95% CI: (-0.06%, -0.06%)], mortality [AAPC = -0.25%, 95% CI: (-0.25%, -0.24%)] and DALYs rates of VL [AAPC = -2.38%, 95% CI: (-2.44%, -2.33%)] all appeared a tendency towards a decline from 1990 to 2021, and the highest age-standardized incidence [2.55/10⁵, 95% UI: (1.49/10⁵, 4.07/10⁵)], prevalence [0.64/10⁵, 95% UI: (0.37/10⁵, 1.02/10⁵)], mortality [0.51/10⁵, 95% UI: (0, 1.80/10⁵)] and DALYs rates of VL [33.81/10⁵, 95% UI: (0.06/10⁵, 124.09/10⁵)] were seen in tropical Latin America in 2021. The global age-standardized incidence and prevalence of VL were both higher among men [0.57/10⁵, 95% UI: (0.45/10⁵, 0.72/10⁵); 0.14/10⁵, 95% UI: (0.11/10⁵, 0.18/10⁵)] than among women [0.27/10⁵, 95% UI: (0.21/10⁵, 0.33/10⁵); 0.06/10⁵, 95% UI: (0.05/10⁵, 0.08/10⁵)], and the highest mortality of VL was found among children under 5 years of age [0.24/10⁵, 95% UI: (0.08/10⁵, 0.66/10⁵)]. The age-standardized incidence (r = -0.483, P < 0.001), prevalence (r = -0.483, P < 0.001), mortality (r = -0.511, P < 0.001) and DALYs rates of VL (r = -0.514, P < 0.001) correlated negatively with SDI levels from 1990 to 2021. In addition, the global burden of VL was projected with the BAPC model to appear a tendency towards a decline from 2022 to 2035, and the age-standardized incidence, prevalence, mortality and DALYs rates were projected to be reduced to 0.11/10⁵, 0.03/10⁵, 0.02/10⁵ and 1.44/10⁵ in 2035, respectively. Conclusions Although the global burden of VL appeared an overall tendency towards a decline from 1990 to 2021, the burden of VL showed a tendency towards a rise in Central Asia and western sub-Saharan African areas. The age-standardized incidence and prevalence rates of VL were relatively higher among men, and the age-standardized mortality of VL was relatively higher among children under 5 years of age. The global burden of VL was projected to continue to decline from 2022 to 2035.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

ObjectiveBased on the concept of quality by design（QbD）， the processing process of calcined Pyritum was optimized， and its X-ray diffraction（XRD） fingerprint was established. MethodsThe safety， effectiveness and quality controllability of calcined Pyritum were taken as the quality profile（QTPP）， the color， hardness， metallic luster， phase composition， the contents of heavy metals and hazardous elements were taken as the critical quality attributes（CQAs）， and the calcination temperature， calcination time， paving thickness and particle size were determined as the critical process parameters（CPPs）. Differential thermal analysis， X-ray diffraction（XRD） and inductively coupled plasma mass spectrometry（ICP-MS） were used to analyze the correlation between the calcination temperature and CQAs of calcined Pyritum. Then， based on the criteria importance through intercriteria correlation（CRITIC）-entropy weight method， the optimal processing process of calcined Pyritum was optimized by orthogonal test. Powder XRD was used to analyze the phase of calcined Pyritum samples processed according to the best process， and the mean and median maps of calcined Pyritum were established by the superposition of geometric topological figures， and similarity evaluation and cluster analysis were carried out. ResultsThe results of single factor experiments showed that the physical phase of Pyritum changed from FeS₂ to Fe₇S₈ during the process of temperature increase， the color gradually deepened from dark yellow， and the contents of heavy metals and harmful elements decreased. The optimized processing process of calcined Pyritum was as follows：calcination temperature at 750 ℃， calcination time of 2.5 h， paving thickness of 3 cm， particle size of 0.8-1.2 cm， vinegar quenching 1 time［Pyritum-vinegar（10∶3）］. After calcination， the internal structure of Pyritum was honeycomb-shaped， which was conducive to the dissolution of active ingredients. XRD fingerprints of 13 batches of calcined Pyritum characterized by 10 common peaks were established. The similarities of the relative peak intensities of the XRD fingerprints of the analyzed samples were>0.96， and it could effectively distinguish the raw products and unqualified products. ConclusionTemperature is the main factor affecting the quality of calcined Pyritum. After processing， the dissolution of the effective components in Pyritum increases， and the contents of heavy metals and harmful substances decrease， reflecting the function of processing to increase efficiency and reduce toxicity. The optimized processing process is stable and feasible， and the established XRD fingerprint can be used as one of the quality control standards of calcined Pyritum.

Objective: Based on spinopelvic parameters and biomechanical principles, the pedicle-facet joint (PFJ) morphological characteristics of isthmic and degenerative spondylolisthesis were analyzed, and the mechanism of their onset and progression was discussed. Methods: This retrospective cross-sectional study included 194 patients with L5 spondylolysis or L5–S1 low-grade isthmic spondylolisthesis (IS group), 172 patients with L4–5 degenerative spondylolisthesis (DS group), and 366 patients with nonlumbar spondylolysis (NL group). The spinopelvic parameters and PFJ morphological parameters of the patients were measured, the differences in these parameters among and within the 3 groups were compared, and the correlations were analyzed. Results: Sacral slope (SS) and lumbar lordosis (LL) were the highest in the IS group, the second highest in the DS group, and the lowest in the NL group. Among the 3 groups, the L4 facet joint angle (FJA) was the largest in the IS group, the second largest in the NL group, and the smallest in the DS group. The L4 pedicle-facet joint angle (PFA) was the largest in the DS group, the second largest in the IS group, and the smallest in the NL group. Pearson correlation analysis showed that within each group, SS and LL were negatively correlated with FJA and positively correlated with PFA. Conclusion This study found a correlation between the PFJ morphological characteristics of patients with lumbar spondylolisthesis and spinopelvic parameters, suggesting that the morphological characteristics of PFJs may be caused by varying stresses under different spinopelvic morphologies.