AIM:To evaluate the effectiveness of EYESI binocular indirect ophthalmoscope simulation system as a training platform for fundus examination skills of general practitioner.METHODS:Prospective randomized study. A total of 40 general practitioners who received clinical ophthalmology training at Shenzhen Eye Hospital from January 2021 to December 2024 were selected and randomly divided into two groups by random number table method, with 20 cases in the study group and 20 cases in the control group. The study group was trained by EYESI binocular indirect ophthalmoscope simulation system and the control group was trained by conventional teaching. Training effects of the two groups were analyzed.RESULTS: The general information of the two groups was comparable. Through training with the EYESI binocular indirect ophthalmoscope simulator, the study group showed significant improvements in total examination and drawing scores compared to pre-training results(all P<0.001). Additionally, examination duration, retinal light exposure time, and drawing time were all significantly shorter than those before training(all P<0.001).The study group achieved significantly higher total examination and drawing scores than the control group during the EYESI binocular indirect ophthalmoscope simulator assessment(all P<0.001). Furthermore, examination duration, retinal light exposure time, and drawing time were all significantly shorter in the study group compared to the control group(all P<0.001). Moreover, ratings for the novelty of the training method and overall satisfaction with the training were significantly higher in the study group than in the control group(all P<0.001); while the perceived psychological stress during training was significantly lower in the study group(P<0.001).CONCLUSION:The EYESI binocular indirect ophthalmoscope simulaton system effectively enhances both the proficiency in fundus examination skills and overall training satisfaction among general practitioners.

To explore the variation laws of volatile oil during the extraction process of Artemisiae Argyi Folium and its impact on the quality of the medicinal solution, as well as to achieve precise control of the extraction process, this study employed headspace solid phase microextraction gas chromatography-mass spectrometry(HS-SPME-GC-MS) in combination with multiple light scattering techniques to conduct a comprehensive analysis, identification, and characterization of the changes in volatile components and the physical properties of the medicinal solution during the extraction process. A total of 82 volatile compounds were identified using the HS-SPME-GC-MS technique, including 21 alcohols, 15 alkenes, 14 ketones, 9 acids, 6 aldehydes, 5 phenols, 3 esters, and 9 other types of compounds. At different extraction time points(15, 30, 45, and 60 min), 71, 72, 64, and 44 compounds were identified in the medicinal solution, respectively. It was observed that the content of volatile components gradually decreased with the extension of extraction time. Through multivariate statistical analysis, four compounds with significant differences during different extraction time intervals were identified, namely 1,8-cineole, terpinen-4-ol, 3-octanone, and camphor. RESULTS:: from multiple light scattering techniques indicated that at 15 minutes of extraction, the transmittance of the medicinal solution was the lowest(25%), the particle size was the largest(0.325-0.350 nm), and the stability index(turbiscan stability index, TSI) was the highest(0-2.5). With the extension of extraction time, the light transmittance of the medicinal solution improved, stability was enhanced, and the particle size decreased. These laws of physicochemical property changes provide important basis for the control of Artemisiae Argyi Folium extraction process. In addition, the changes in the bioactivity of Artemisiae Argyi Folium extracts during the extraction process were investigated through mouse writhing tests and antimicrobial assays. The results indicated that the analgesic and antimicrobial effects of the medicinal solution were strongest at the 15-minute extracting point. In summary, the findings of this study demonstrate that the content of volatile oil in Artemisiae Argyi Folium extracts gradually decreases with the extension of extraction time, and the variation in volatile oil content directly influences the physicochemical properties and pharmacological efficacy of the medicinal solution. This discovery provides important scientific reference for the optimization of Artemisiae Argyi Folium extraction processes and the development and application of process analytical technologies.
Oils, Volatile/pharmacology* ; Artemisia/chemistry* ; Gas Chromatography-Mass Spectrometry ; Drugs, Chinese Herbal/pharmacology* ; Chlorogenic Acid/pharmacology* ; Solid Phase Microextraction ; Quality Control

Cuproptosis, a recently identified form of regulated cell death triggered by excess intracellular copper, has emerged as a promising cytotoxic strategy for cancer therapy. However, the therapeutic efficacy of copper ionophores such as elesclomol (ES) is often hindered by cellular copper homeostasis mechanisms that limit copper influx and cuproptosis induction. To address this challenge, we developed a nanoagent utilizing outer membrane vesicle (OMV) derived from Akkermansia muciniphila (Akk) for co-delivery of antioxidant 1 copper chaperone (Atox1)-targeting siRNA and ES (siAtox1/ES@OMV) to tumors. In vitro, we demonstrated that Atox1 knockdown via siRNA significantly disrupted copper export mechanisms, resulting in elevated intracellular copper levels. Simultaneously, ES facilitated efficient copper influx and mitochondrial transport, leading to Fe-S cluster depletion, increased proteotoxic stress, and robust cuproptosis. In vivo, siAtox1/ES@OMV achieved targeted tumor delivery and induced pronounced cuproptosis. Furthermore, leveraging the immunomodulatory properties of OMVs, siAtox1/ES@OMV promoted T-cell infiltration and the activation of tumor-reactive cytotoxic T cells, enhancing tumor immune responses. The combination of siAtox1/ES-induced cuproptosis and immunogenic cell death synergistically suppressed tumor growth in both subcutaneous breast cancer and orthotopic rectal cancer mouse models. This study highlights the potential of integrating copper homeostasis disruption with a copper ionophore using an immunomodulatory OMV-based vector, offering a promising combinatorial strategy for cancer therapy.

Triple-negative breast cancer is therapeutically challenging due to the low expression of tumor markers and 'cold' tumor immunosuppressive microenvironment. Here, we present a dual-targeting peptide-drug conjugate (PDC) for tumor inhibition. Our PDC efficiently and selectively delivers cytotoxic Monomethyl Auristatin E (MMAE) into tumor cells via C-X-C chemokine receptor type 4 (CXCR4) and folate receptor 1 (FOLR1) for synergistic inhibition of growth and metastasis. Our results show that the dual-targeting PDC has potent antitumor activity in cultured human cells and several murine transplanted tumor models without apparent toxicity. The combination of dual-targeting PDC and radiotherapy modulates the tumor immunosuppressive microenvironment by increasing CD8⁺ T cell infiltration and attenuating the proportion of myeloid-derived suppressor and regulatory T cells. Therefore, our dual-targeting PDC represents a promising new strategy for cancer therapy that rebalances the immune system and promotes tumor regression.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To explore the potential of integrating virtual surgery with three-dimensional (3D) printed guides in the surgical management of mandibular benign tumors and subsequent reconstruction of bone defects.Methods:A retrospective analysis was conducted on the clinical data of patients who underwent computer-assisted resection and vascularized fibular flap reconstruction for benign mandibular tumors at the Department of Oral and Maxillofacial Surgery, First Affiliated Hospital of Zhengzhou University, from June 2013 to December 2020. According to the utilization of guide plates for mandibular and fibular osteotomy during surgical procedures or not, the patients were categorized into two cohorts: a guide plate cohort and a non-guide plate cohort. In the guide plate group, custom-designed gudie plates based on virtual surgical plans were fabricated using 3D printing technology and employed intraoperatively; In the non-guide plate group, surgery was exclusively performed based on virtual surgical plan and prebent titanium plate without any supplementary plating. The measured outcomes included fibular flap osteotomy, operation duration, and clinical flap survival. Computed tomography images obtained one week post-surgery were utilized to assess the intersegmental commissure degree between fibular segments as well as between fibular segments and mandible, commissure degree between fibular segments and prebent titanium plate, and condyle position. The satisfaction of patients with their facial appearance was evaluated 6 months after the surgery using a visual analogue scale. Statistical analysis was conducted using SPSS 21.0 software. Independent sample t-tests was utilized to compare the duration of operation and and postoperative evaluation of facial appearance, the Chi-square tests was utilized for condyle position, commissure degrees among interactions involving fibular segments, prebent titanium plates, bone segments( P<0.05 denoted statistical significance). Results:A total of 30 patients were enrolled, comprising 17 males and 13 females, with a median age of 24 years (16-64 years). The preparation process of fibular flaps proceeded smoothly. The required length of fibula was measured as (14.1 ± 1.9) cm (5.7-18.1 cm), while the number of fibular segments ranged from 2 to 4, averaging at approximately 2.9 ± 0.6. The mandibular defects were repaired using a single-layer fibula in 12 cases, a vascularized folded fibula in 7 cases and a combination of vascularized and non-vascularized fibula in 11 cases. The operation time for the guide plate group was recorded as ( 335.9 ± 64.0) min (240-433 min), while it was observed to be (470.7 ± 140.5 ) min (280-680 min) for the non-guide plate group.The postoperative follow-up duration ranged from 9 to 23 months, with an average period of 11 months. All fibular flaps demonstrated clinical survival. The number of patients with good commissure degree between fibular and mandibular segments, between prebent titanium plate and fibular and mandibular segments and the position of condyle were 15, 15 and 13 cases in guide plate group, 10, 13 and 11 cases in non-guide plate group respectively. The statistical analysis revealed a significant difference ( P<0.05) in the degree of commissure between the fibular and the mandibular segments (15/15 vs. 10/15) in the two groups. Both groups exhibited high levels of satisfaction regarding their postoperative facial appearance at the 6 months follow-up, observed to be 9.6±0.5 and 9.3±0.5 respectively, and the statisticla analysis revealed non-significant difference ( P>0.05). Conclusion:The integration of virtual surgery with 3D printed guide plates can effectively reduce operative time and improve precision in the repair and reconstruction of free-fibular flaps following resection of benign tumors of the mandible.

Objective:To introduce a surgical method involving the indwelling of double-J tubes(DJT)in the seminal vesicles after transurethral seminal vesiculoscopy(TSV)in order to reduce the recurrence of refractory ejaculatory duct obstruction(EDO).Methods:This randomized controlled trial included 67 EDO patients undergoing TSV in our hospitals,27 with(the trial group)and 29 without postoperative indwelling of DJTs in the seminal vesicles(the control group).We collected the general information on the pa-tients and TSV-related parameters,including age,body mass index(BMI),preoperative use of antibiotics,history of urinary tract dis-ease,operation time,hospital stay and intra-and postoperative complications,and performed comparative analyses particularly on the surgical effect,complications,recurrence rate and time to recurrence in the two groups of patients.Results:The patients in the trial and control groups were followed up for(40.5±10.6)and(32.5±14.8)months,respectively.There were no statistically signifi-cant differences in the baseline data,intra-and postoperative complications,and postoperative hospital days between the two groups(P＞0.05).Compared with the controls,the patients in the trial group showed a significantly shorter operation time([62.8±6.1]vs[49.5±7.7]min,P＜0.05)and a lower recurrence rate than the controls(18.5％vs 44.8％,P＜0.05),but with no statisti-cally significant difference in the median time to recurrence(21.0 mo vs 22.0 mo,P＞0.05).Conclusion:The novel technique of indwelling double-J tubes in the seminal vesicles after TSV can significantly reduce the recurrence rate of refractory EDO.

Objective:To analyze the factors for low libido in male patients with sexual dysfunction and provide some evidence for the clinical diagnosis and treatment of the condition.Methods:We retrospectively analyzed the clinical data on 111 cases of sex-ual dysfunction(including disorders in erection,ejaculation or libido)treated in the Zhengzhou University First Hospital from June to September 2023.According to the patients'complaints of low libido or accompanied symptoms,we divided them into a normal libido group(n=68)and a low libido(n=43),obtained their scores on IIEF-5,Premature Ejaculation Diagnostic Tool(PEDT),13-1-tem Self-Rating Libido Scale for Males(SRLS-M),Patients'Health Questionnaire-9(PHQ-9)and General Anxiety Disorder-7(GAD-7),examined the levels of the sexual hormones FSH,LH,PRL,T,free testosterone(fT),E2,?insulin-like growth factor 1(IGF-1)and growth hormone(GH),compared the basic parameters between the two groups,and analyzed their correlation with the libido values.Results:The IIEF-5,PEDT and libido scores and IGF-1 level were significantly higher and the GAD-7 score remark-ably lower in the normal than in the low libido group(P＜0.05),but no statistically significant differences were observed between the two groups in the PHQ-9 score and the levels FSH,LH,PRL,T,fT,E2,T/E2 and GH(P＞0.05).The libido value was correla-ted positively with the I1EF-5(r=0.28,P＜0.01)and PEDT scores(r=0.29,P＜0.01)and IGF-1 level(r=0.23,P＜0.05),but negatively with the GAD-7 score(r=-0.21,P＜0.05).Conclusion:Low libido results from multiple factors,which cannot be fully explained by sexual hormone levels but is closely related to the decreased level of IGF-1 and severity of ED and anxiety.

Objective We aimed to compare the efficacy and prognosis of percutaneous coronary intervention(PCI)in complex and high-risk patients with coronary heart disease(CHD)treated with extracorporeal membrane oxygenation(ECMO)combined with intra-aortic balloon pump(IABP)assistance,and explore the application value of combined use of mechanical circulatory support(MCS)devices in complex PCI.Methods A total of patients who met the inclusion criteria and underwent selective PCI supported by MCS at the Department of Cardiology,the First Affiliated Hospital of the Air Force Medical University from January 2018 to December 2022 were continuously enrolled.According to the mechanical circulatory support method,the patients were divided into ECMO+IABP group and IABP group.Clinical characteristics,angiographic features,in-hospital outcomes,and complications were collected.The intra-hospital outcomes and major adverse cardiovascular events(MACE)at one month and one year after the procedure were observed.The differences and independent risk factors between the two groups in the above indicators were analyzed.Results A total of 218 patients undergoing elective PCI were included,of which 66 patients were in the ECMO+IABP group and 152 patients were in the IABP group.The baseline characteristics of the two groups of patients were generally comparable,but the ECMO+IABP group had more complex lesion characteristics.The proportion of patients with atrial fibrillation(6.1％vs.0.7％,P=0.030),left main disease(43.9％vs.27.0％,P=0.018),triple vessel disease(90.9％vs.75.5％,P=0.009),and RCA chronic total occlusion disease(60.6％vs.35.5％,P＜0.001)was higher in the ECMO+IABP group compared to the IABP group.The proportion of patients with previous PCI history was higher in the IABP group(32.9％vs.16.7％,P=0.014).There was no statistically significant difference in the incidence of in-hospital complications between the two groups(P=0.176),but the incidence of hypotension after PCI was higher in the ECMO+IABP group(19.7％vs.9.2％,P=0.031).The rates of 1-month MACE(4.5％vs.2.6％,P=0.435)and 1-year MACE(7.6％vs.7.9％,P=0.936)were comparable between the two groups.Multivariate analysis showed that in-hospital cardiac arrest(OR 7.17,95％CI 1.27-40.38,P=0.025)and after procedure hypotension(OR 3.60,95％CI 1.10-11.83,P=0.035)were independent risk factors for the occurrence of 1-year MACE.Conclusions Combination use of ECMO+IABP support can provide complex and high-risk coronary heart disease patients with an opportunity to achieve coronary artery revascularization through PCI,and achieve satisfactory long-term prognosis.

Zona Incerta ; Prefrontal Cortex ; Fear ; Neural Pathways