ObjectiveTo investigate the effect and mechanism of cordycepin in inhibiting fat infiltration after rotator cuff injuries in rats by regulating the Wnt/β-catenin signaling pathway， providing a theoretical basis for clinical treatment of rotator cuff injuries. MethodsFifty SPF-grade female SD rats were used in this study， with 10 randomly selected as the blank group. A rotator cuff injury repair model was established by supraspinatus tendon and suprascapular nerve compression. The successfully modeled rats were randomized into model and low-dose （20 mg·kg^-1）， medium-dose （40 mg·kg^-1）， and high-dose （80 mg·kg^-1） cordycepin groups. After 6 weeks of treatment， the gait analysis was performed to assess the limb function in rats. Oil red O staining and Masson staining were employed to observe pathological changes in the muscle tissue. Enzyme-linked immunosorbent assay （ELISA） was used to measure the levels of interleukin-1β （IL-1β）， interleukin-6 （IL-6）， and tumor necrosis factor-α （TNF-α） in the serum. Immunohistochemistry （IHC） was employed to detect the expression of peroxisome proliferator-activated receptor γ （PPARγ） and CCAAT/enhancer-binding protein α （C/EBPα）， which are markers of adipogenesis. Real-time fluorescence quantitative polymerase chain reaction （Real-time PCR） and Western blot were employed to determine the mRNA and protein levels， respectively， of Wnt3a， Wnt10b， and β-catenin. ResultsCompared with the blank group， the model group showed decreases in stride length and paw print area （P<0.01）， an increase in ratio of wet muscle mass reduction and a decrease in muscle fiber cross-sectional area （P<0.05）， and decreased ratios of fat infiltration area and collagen fiber area （P<0.01）. Additionally， the model group showed elevated levels of IL-1β， IL-6， and TNF-α （P<0.05）， up-regulated protein levels of PPARγ and C/EBPα （P<0.01）， and down-regulated mRNA and protein levels of Wnt3a， Wnt10b， and β-catenin （P<0.05， P<0.01）. Compared with the model group， the low-， medium-， and high-dose cordycepin groups showed increases in stride length and paw print area （P<0.01）， a decrease in ratio of wet muscle mass reduction and an increase in muscle fiber cross-sectional area （P<0.05）， and increases in ratios of fat infiltration area and collagen fiber area （P<0.05， P<0.01）. In addition， cordycepin lowered the serum levels of IL-1β， IL-6， and TNF-α （P<0.05， P<0.01）， down-regulated the protein levels of PPARγ and C/EBPα （P<0.01）， and up-regulated the mRNA and protein levels of Wnt3a， Wnt10b， and β-catenin （P<0.05， P<0.01）. ConclusionCordycepin can improve the limb function， alleviate rotator cuff muscle atrophy， fat infiltration， and fibrosis， and inhibit inflammation in rats by regulating the Wnt/β-catenin signaling pathway.

The increasing prevalence of aging has led to a rising incidence of comorbidity of sarcopenia and obesity, posing significant burdens on socioeconomic and public health. Current research has systematically explored the pathogenesis of each condition; however, the mechanisms underlying their comorbidity remain unclear. This study reviews the current literature on sarcopenia and obesity in the aging population, focusing on their shared biological mechanisms, which include loss of autophagy, abnormal macrophage function, mitochondrial dysfunction, and reduced sex hormone secretion. It also identifies metabolic mechanisms such as insulin resistance, vitamin D metabolism abnormalities, dysregulation of iron metabolism, decreased levels of nicotinamide adenine dinucleotide, and gut microbiota imbalances. Additionally, this study also explores the important role of genetic factors, such as alleles and microRNAs, in the co-occurrence of sarcopenia and obesity. A better understanding of these mechanisms is vital for developing clinical interventions and preventive strategies.
Humans ; Sarcopenia/physiopathology* ; Obesity/physiopathology* ; Aging/physiology* ; Autophagy/physiology* ; Insulin Resistance ; Comorbidity ; Vitamin D/metabolism* ; Gonadal Steroid Hormones/metabolism* ; Gastrointestinal Microbiome ; Mitochondria ; MicroRNAs

Baihuasheshecao(Hedyotis diffusa) is a commonly used traditional Chinese medicine derived from the whole herb of H. diffusa and has been widely utilized in folk medicine. It possesses anti-tumor, antibacterial, and anti-inflammatory properties, making it one of the frequently used herbs in TCM clinical practice. However, Shuixiancao(H. corymbosa) and Xianhuaercao(H. tenelliflora), species of the same genus, are often used as substitutes for Baihuasheshecao. To substantiate the medicinal basis of Baihuasheshecao, this study systematically reviewed classical herbal texts and modern literature, examining its nomenclature, botanical origin, harvesting, processing, properties, meridian tropism, pharmacological effects, and clinical applications. The results indicate that Baihuasheshecao was initially recorded as "Shuixiancao" in Preface to the Indexes to the Great Chinese Botany(Zhi Wu Ming Shi Tu Kao). Based on its morphological characteristics and habitat description, it was identified as H. diffusa in the Rubiaceae family. Subsequent records predominantly refer to it as Baihuasheshecao as its official name. In most regions, Baihuasheshecao is recognized as the authentic medicinal material, distinct from Shuixiancao and Xianhuaercao. Baihuasheshecao is harvested in late summer and early autumn, and the dried whole plant, including its roots, is used medicinally. The standard processing method involves cutting. It is known for its effects in clearing heat, removing toxins, reducing swelling and pain, and promoting diuresis to resolve abscesses. Initially, it was mainly used for treating appendicitis, intestinal abscesses, and venomous snake bites, and later, it became a treatment for cancer. The excavation of its clinical value followed a process in which overseas Chinese introduced the herb from Chinese folk medicine to other countries. After its unique anti-cancer effects were recognized abroad, it was reintroduced to China and gradually became a crucial TCM for cancer treatment. The findings of this study help clarify the historical and contemporary uses of Baihuasheshecao, providing literature support and a scientific basis for its rational development and precise clinical application.
Humans ; China ; Drugs, Chinese Herbal/chemistry* ; Hedyotis/classification* ; Medicine, Chinese Traditional/history*

OBJECTIVE: To explore the differences in clinical efficacy between enhanced workflows and express workflows in robotic-assisted total hip arthroplasty(THA). METHODS: A retrospective analysis was conducted on 46 patients who underwent robotic-assisted THA between November 2020 and May 2021. They were divided into the enhanced workflows group and the express workflows group based on the surgical methods. There were 20 patients in the enhanced workflows group, including 11 males and 9 females;aged from 51 to 78 years old with an average of (67.30±7.52) years old. The BMI ranged from 18.24 to 24.03 kg·m^-2 with an average of(23.80±3.01) kg·m^-2. There were 26 patients in the express workflows group, including 12 males and 14 females;aged from 57 to 84 years old with a mean age of (67.58±7.29) years old, and their BMI ranged from 19.72 to 30.08 kg·m^-2 with an average of (24.41 ±2.92) kg·m^-2. The operation time, hospital stay, and perioperative complications of the patients were recorded. The postoperative acetabular prosthesis anteversion angle, abduction angle, limb length, and offset distance data were measured. The Harris hip score at the latest follow-up was recorded. RESULTS: All patients completed the surgery as planned and were followed up, with the follow-up period ranging from 47 to 54 months with a mean of (49.78±1.85) months and the length of hospital stay ranging from 2 to 11 days with an average of (6.57±1.82 ) days. The operation time of enhanced workflows group was (93.41±16.41) minutes, which was longer than that of the express workflow groups (75.19±18.36) minutes, and the difference was statistically significant (P<0.05). In enhanced workflows group, the postoperative acetabular anteversion angle was (19.20±4.46)°, the limb length discrepancy was (-1.55±9.13) mm, and changes of the offset was (-5.15±6.77) mm. The corresponding values in express workflows group were (20.46±3.29)°, (2.19±4.39) mm, and (-2.39±4.34) mm, respectively. There was no statistically significant difference in these indicators between the two groups(P>0.05). One patient in the enhanced workflows group developed deep venous thrombosis after surgery. No cases of dislocation or periprosthetic infection. At the latest follow-up, all patients had well-positioned prostheses without loosening. Harris hip score was (90.50±1.67) points in enhanced workflows group and (90.73±2.36) points in the express workflows group, with no statistically significant difference between the two groups (P>0.05). CONCLUSION The clinical efficacy of robot assisted total hip arthroplasty technology is satisfactory. The enhanced workflows will increase the surgical time. For patients with normal anatomical hip joint disease, this study did not find significant advantages in joint stability and functional scoring for the enhanced workflows.
Humans ; Arthroplasty, Replacement, Hip/methods* ; Male ; Female ; Aged ; Middle Aged ; Robotic Surgical Procedures/methods* ; Retrospective Studies ; Aged, 80 and over ; Workflow ; Treatment Outcome

OBJECTIVE: To observe the clinical efficacy of 3D printing spinal external fixator combined with McKenzie therapy for patients with lumbar dics herniation (LDH). METHODS: Sixty patients with LDH between January 2022 and January 2023 were enrolled. Among them, 30 patients were given McKinsey training. According to different treatment methods, all patients were divided into McKenzie group and McKenzie + 3D printing group, 30 patients in each group. The McKenzie group provided McKenzie therapy. The McKenzie + 3D printing group were treated with 3D printing spinal external fixation brace on the basis of McKenzie therapy. Patients in both groups were between 25 and 60 years of age and had their first illness. In the McKenzie group, there were 19 males and 11 females, with an average age of (48.57±5.86) years old, and the disease duration was (7.03 ±2.39) months. The McKenzie + 3D printing group, there were 21 males and 9 females, with an average age of (48.80±5.92) years old, and the disease duration was(7.30±2.56) months. Pain was evaluated using the visual analogue scale (VAS), and lumbar spine function was assessed using the Oswestry disability index (ODI) and the Japanese Orthopaedic Association (JOA) score. VAS, ODI and JOA scores were compared between two groups before treatment and at 1, 3, 6, 9 and 12 months after treatment. RESULTS: All patients were followed up for 12 months. The VAS for the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(6.533±0.860), (5.133±1.008), (3.933±0.868), (2.900±0.759), (2.067±0.640), (1.433±0.504), respectively. In the McKenzie group, the corresponding scores were (6.467±0.860), (5.067±1.048), (4.600±0.968), (3.533±1.008), (2.567±0.728), (1.967±0.809), respectively. The ODI of the McKenzie group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were (41.033±6.810)%, (37.933±6.209)%, (35.467±6.962)%, (27.567±10.081)%, (20.800±7.531)%, (13.533±5.158)%, respectively. For the McKenzie combined with 3D printing group, the corresponding ODI were(38.033±5.605)%, (33.000±6.192)%, (28.767±7.045)%, (22.200±5.517)%, (17.700±4.836)%, (11.900±2.771)%, respectively. The JOA scores of the McKenzie combined with 3D printing group before treatment and at 1, 3, 6, 9, and 12 months post-treatment were(8.900±2.074), (13.133±2.330), (15.700±3.583), (20.400±3.480), (22.267±3.084), (24.833±2.640), respectively. In the McKenzie group, the corresponding scores were(9.200±2.091), (12.267±2.406), (15.333±3.198), (18.467±2.240), (20.133±2.751), (22.467±2.849), respectively. Before the initiation of treatment, no statistically significant differences were observed in the VAS, ODI, and JOA scores between two groups (P>0.05). At 3, 6, 9, and 12 months post-treatment, the VAS in the McKenzie combined with 3D printing group was significantly lower than that in the McKenzie group, and the difference was statistically significant (P<0.05). The comparison of ODI between two groups at 1, 3, 6, 9, and 12 months post-treatment revealed statistically significant differences (P<0.05). At 6, 9, and 12 months post-treatment, the JOA score in the McKenzie combined with 3D printing group was significantly higher than that in the McKenzie-only group, and the difference was statistically significant (P<0.05). CONCLUSION The combination of 3D printed functional spinal external fixation brace with McKenzie therapy can significantly improve and maintain lumbar function in patients with LDH.
Humans ; Male ; Female ; Middle Aged ; Printing, Three-Dimensional ; Intervertebral Disc Displacement/surgery* ; External Fixators ; Lumbar Vertebrae/surgery* ; Adult ; Braces ; Treatment Outcome

OBJECTIVE: To evaluate the effects of posterior cruciate ligament(PCL) resection on soft tissue elasticity and knee stability in total knee arthroplasty(TKA). METHODS: Six adult cadaveric knee specimens (involving 10 knees) were included in the study. With the assistance of the robotic system(TiRobot Recon, TINAVI, Beijing), total knee arthroplasty (TKA) was performed sequentially using cruciate retaining (CR) prostheses and posterior stabilizing (PS) prostheses. Between the two surgical procedures, the femoral and tibial osteotomy surfaces were not altered;only the posterior cruciate ligament (PCL) was resected and the intercondylar fossa was treated. After installing the femoral trial component, a soft tissue balance solver was used to apply tension ranging from 30 N to 90 N in 5 N increments at 0°, 10°, and 90° of knee flexion. Meanwhile, the medial and lateral joint gaps were measured synchronously. Based on the tension-gap coupling data, the equivalent elastic coefficients of the medial and lateral soft tissue sleeves at different knee flexion angles, as well as the range of the joint line convergence angle (JLCA) under fixed varus-valgus stress, were calculated. Additionally, the gap balance status under 80 N of tension was analyzed. Self-control comparisons of each indicator were conducted before and after PCL resection to analyze the change patterns. RESULTS: After PCL resection, in the fully extended position (knee flexion 0°). The medial equivalent elastic coefficient was 32.2 (25.7, 63.3) N·mm^-1 for the CR prosthesis and 27.7 (22.0, 51.9) N·mm^-1 for the PS prosthesis, and the statistically significant difference (P=0.013). The range of JLCA was 0.41°(0.26, 0.55)° for the CR prosthesis, which was smaller than 0.75° (0.40, 0.98)° for the PS prosthesis, and the difference was statistically significant(P=0.041). At 90° of knee flexion, the medial joint gap was 10.7(10.1, 11.7) mm for the CR prosthesis, which was smaller than 12.1(10.9, 15.1) mm for the PS prosthesis, with a statistically significant difference(P=0.011). No statistically significant differences were observed in other joint gaps. CONCLUSION PCL resection reduces the rigidity of the medial soft tissues in the fully extended knee and increases the medial joint gap in the flexed position, thereby affecting knee stability and balance. This finding suggests that PS and CR prostheses may require different morphological designs, and there should be differences in indications and osteotomy strategies between CR-TKA and PS-TKA. CR-TKA is more suitable for patients with preoperative medial soft tissue laxity.
Humans ; Posterior Cruciate Ligament/physiopathology* ; Knee Joint/physiopathology* ; Arthroplasty, Replacement, Knee ; Elasticity ; Male ; Female ; Middle Aged ; Aged ; Biomechanical Phenomena ; Adult

Stress is a critical inducer in the onset and progression of many chronic diseases. Prolonged or intense stress can disrupt the overall balance between the nervous, immune, and endocrine systems. The resulting biological signals may act on corresponding receptors in the cervical spine region, leading to adverse pathological changes. The vertebral artery and the surrounding muscular and connective tissues are influenced by biomechanical abnormalities and inflammatory cascades associated with cervical spondylosis of vertebral artery type (CSA), which promotes the release of various hormones. These hormones, through the neuroendocrine-immune system, affect the central nervous system, inducing or exacerbating negative emotional feedback and thereby establishing a "central-local-central" vicious cycle. This article explores the mechanisms underlying the impact of stress on the key CSA symptoms through the neuroendocrine-immune network (NEI) theory, providing a more comprehensive framework for targeted therapeutic interventions in CSA.
Humans ; Neurosecretory Systems/immunology* ; Spondylosis/etiology* ; Vertebral Artery/immunology* ; Stress, Psychological/complications* ; Chronic Disease

HDAC7, a member of class IIa HDACs, plays a pivotal regulatory role in tumor, immune, fibrosis, and angiogenesis, rendering it a potential therapeutic target. Nevertheless, due to the high similarity in the enzyme active sites of class IIa HDACs, inhibitors encounter challenges in discerning differences among them. Furthermore, the substitution of key residue in the active pocket of class IIa HDACs renders them pseudo-enzymes, leading to a limited impact of enzymatic inhibitors on their function. In this study, proteolysis targeting chimera (PROTAC) technology was employed to develop HDAC7 drugs. We developed an exceedingly selective HDAC7 PROTAC degrader B14 which showcased superior inhibitory effects on cell proliferation compared to TMP269 in various diffuse large B cell lymphoma (DLBCL) and acute myeloid leukemia (AML) cells. Subsequent investigations unveiled that B14 disrupts BCL6 forming a transcriptional inhibition complex by degrading HDAC7, thereby exerting proliferative inhibition in DLBCL. Our study broadened the understanding of the non-enzymatic functions of HDAC7 and underscored the importance of HDAC7 in the treatment of hematologic malignancies, particularly in DLBCL and AML.

The rapid development of artificial intelligence (AI), especially generative AI (GenAI), has already brought, and will continue to bring, revolutionary changes to our daily production and life, as well as create new opportunities and challenges for diagnostic and therapeutic practices in the medical field. Haihe Hospital of Tianjin University collaborates with the National Supercomputer Center in Tianjin, Tianjin University, and other institutions to carry out research in areas such as smart healthcare, smart services, and smart management. We have conducted research and development of a full-process disease diagnosis and treatment assistance system based on GenAI in the field of smart healthcare. The development of this project is of great significance. The first goal is to upgrade and transform the hospital's information center, organically integrate it with existing information systems, and provide the necessary computing power storage support for intelligent services within the hospital. We have implemented the localized deployment of three models: Tianhe "Tianyuan", WiNGPT, and DeepSeek. The second is to create a digital avatar of the chief physician/chief physician's voice and image by integrating multimodal intelligent interaction technology. With generative intelligence as the core, this solution provides patients with a visual medical interaction solution. The third is to achieve deep adaptation between generative intelligence and the entire process of patient medical treatment. In this project, we have developed assistant tools such as intelligent inquiry, intelligent diagnosis and recognition, intelligent treatment plan generation, and intelligent assisted medical record generation to improve the safety, quality, and efficiency of the diagnosis and treatment process. This study introduces the content of a full-process disease diagnosis and treatment assistance system, aiming to provide references and insights for the digital transformation of the healthcare industry.
Artificial Intelligence ; Humans ; Delivery of Health Care ; Generative Artificial Intelligence

OBJECTIVE: To investigate the association between long-term glycemic control and cerebral infarction risk in patients with diabetes through a large-scale cohort study. METHODS: This prospective, community-based cohort study included 12,054 patients with diabetes. From 2006 to 2012, 38,272 fasting blood glucose (FBG) measurements were obtained from these participants. FBG trajectory patterns were generated using latent mixture modelling. Cox proportional hazards models were applied to assess the subsequent risk of cerebral infarction associated with different FBG trajectory patterns. RESULTS: At baseline, the mean age of the participants was 55.2 years. Four distinct FBG trajectories were identified based on FBG concentrations and their changes over the 6-year follow-up period. After a median follow-up of 6.9 years, 786 cerebral infarction events were recorded. Different trajectory patterns were associated with significantly varied outcome risks (Log-Rank P < 0.001). Compared with the low-stability group, Hazard Ratio ( HR) adjusted for potential confounders were 1.37 for the moderate-increasing group, 1.23 for the elevated-decreasing group, and 2.08 for the elevated-stable group. CONCLUSION Sustained high FBG levels were found to play a critical role in the development of ischemic stroke among patients with diabetes. Controlling FBG levels may reduce the risk of cerebral infarction.
Humans ; Cerebral Infarction/blood* ; Middle Aged ; Male ; Female ; Blood Glucose/analysis* ; Fasting/blood* ; Aged ; Prospective Studies ; Risk Factors ; Diabetes Mellitus/blood* ; Adult ; Proportional Hazards Models