Objective: To investigate the changes of dentin surface and the effects of different surface treatments on the rebonding effect following non-destructive restoration removal by an Er:YAG laser and to provide reference for oral clinical operation Methods: This study was approved by the ethics review committee of the unit. Using computer-aided design and computer-aided manufacturing (CAD/CAM) technology, 102 zirconia specimens (4 mm × 4 mm × 1.5 mm) were fabricated. In total, 110 impacted third molar teeth were extracted, and 102 dentine blocks (4 mm × 4 mm × 2 mm) were prepared. The zirconia specimen and dentin blocks were bonded with resin cement before removal with an Er: YAG laser. Three disassembled dentin blocks were randomly selected, and the components of dentin surface elements were analyzed by energy dispersive X-ray spectroscopy (EDX). The removed dentin blocks were randomly divided into three groups (n = 33) based on the different surface treatments: control group (no treatment), sandblasting group (50 μm, Al2O3 sandblasting), and laser irradiation group (Er: YAG laser irradiation, parameters were set to 10 Hz, 60 mJ, 0.6 W). Three dentin blocks were randomly selected in each group for scanning electron microscopy (SEM) observation, and the residual resin on dentin surface of remaining 30 dentin blocks in each group were observed under an optical microscope at 20 times magnification. Scores were obtained using the adhesive remnant index (ARI) method. Three groups of dentin blocks (n = 30) that underwent different surface treatments were rebonded with resin cement according to standard procedures and then divided into two subgroups for aging (n = 15). One subgroup was subjected to a 37 ℃ water bath for 24 h, and the other subgroup was subjected to 5 000 thermal cycles after a 37 ℃ water bath for 24 h, and the micro-shear bonding strength of each group was measured. The microshear bonding strength of each group was measured, and fracture modes were analyzed. The differences of dentine surface ARI between the three groups, as well as the inter-group differences in fracture mode, and bonding strength, and the intra-group differences before and after aging were compared between the three groups. Results: When zirconia was removed by Er: YAG laser, there was no obvious damage on the dentin surface, but C and Si elements in dentin increased significantly. After different surface treatments, the ARI scores of the sandblasting and laser irradiation groups were lower than those of the control group (P<0.05), while ARI was not significantly different between the sandblasting and laser irradiation groups (P>0.05). The dentin surface morphology was also different. There was a large amount of residual resin on the dentin surface of the control group. In the sandblasting group, the residual resin was lower, the dentin surface was rough, and the dentin tubules were visible. A large amount of residual resin was observed on the dentin surface of the laser irradiation group. After 24 h of water bath at 37 ℃, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (6.13 ± 2.40) MPa, (9.39 ± 2.00) MPa, and (5.85 ± 1.44) MPa, respectively, and the bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). After being subjected to 24 h of water bath at 37 ℃ and 5 000 thermal cycles, the bonding strengths of the control group, sandblasting group, and laser irradiation group were (5.39 ± 0.83) MPa, (8.45 ± 1.20) MPa and (4.84 ± 1.43) MPa, respectively. The bonding strength of the sandblasting group was significantly higher than that of the other two groups (P<0.05). There was no significant difference between the control group, sandblasting group, and laser irradiation group before and after 5 000 thermal cycles following 24 h of water bath at 37 ℃ (P>0.05). In the control group, sandblasting group, and laser irradiation group, cohesive fracture was not observed. The fracture mode was mainly adhesive fracture. Before and after 5 000 thermal cycles, the frequency of mixed fracture in the sandblasting group was significantly higher than that in the other two groups (P<0.05). Conclusion Er: YAG laser removal of zirconia does not damage dentin, but a large amount of resin remains on the dentin surface after removal. The sandblasting process can effectively remove these residual resins, thereby improving the dentine rebonding effect.

In this study, RAW264.7 cells were employed to investigate the effects of honey-processed Astragalus on their energy metabolism and polarization, and explore the scientific connotation of the enhanced efficacy of honey-processed Astragalus on invigorating spleen-stomach and replenishing Qi. The medicated sera were prepared by intragastric administration of rats with water extracts of crude and honey-processed Astragalus, and the composition changes of medicated sera of crude and honey-processed Astragalus were analyzed by using LC-MS technology. The cell survival rates were detected and the concentrations of medicated sera were screened through CCK-8 assay. The differences of cell phagocytic rates, ATP energy metabolism, and NO secretion between crude and honey-processed Astragalus were evaluated by using neutral red phagocytosis assay, ATP detection kit, and NO detection kit. The effects of crude and honey-processed Astragalus on TNF-α secretion of RAW264.7 cells were detected by employing ELISA kit. The effects of crude and honey-processed Astragalus on polarization of RAW264.7 cells were evaluated by utilizing flow cytometry. The differential metabolites related to glycolysis in cell lysates and culture media were screened by using LC-MS technology. The experiment was approved by the experimental animal ethics committee from Shanxi University of Chinese Medicine (No. AWE202407352). The results showed that the contents of betaine, amino acids, and ononin in the prepared medicated sera of rats treated by intragastric administration with water extracts of honey-processed Astragalus increased compared to those in crude one. The results of CCK-8 experiment showed that there were no cytotoxic effects on RAW264.7 cells in the medicated sera of crude and honey-processd Astragalus at different concentration. The phagocytic index and ATP yield both increased to varying degrees after administration of the medicated sera to cells. The secretion of NO in normal and inflammatory cells increased and decreased respectively, and the effect of honey-processed Astragalus was better than that of crude one. The results of ELISA kit showed that the medicated sera of both crude and honey-processed Astragalus could promote the secretion of TNF-α in a concentration-dependent manner, and the promoting effect of honey-processed Astragalus was stronger than that of crude one. The results of flow cytometry showed that the medicated sera of both crude and honey-processed Astragalus could promote M1-type polarization and inhibit M2-type polarization of RAW264.7 cells, and the effect of honey-processed Astragalus was better than that of crude one. Compared to crude Astragalus, the metabolites related to glycolysis in the cell lysates and culture media of the medicated sera of honey-processed Astragalus were generally on the rise, indicating that the effect on promoting glycolysis of honey-processed Astragalus was better than that of crude one. In summary, honey-processed Astragalus can promote the polarization and energy metabolism of RAW264.7 cells, and participate in positive immune regulation, which is correlated with its enhanced effect of invigorating spleen-stomach and replenishing Qi.

OBJECTIVE To investigate the establishment and promotion of a new standardized management model for anti- osteoporosis medication after fragility fracture surgery by resident clinical pharmacists， and provide references for resident pharmacists to carry out clinical pharmaceutical services. METHODS From July 2023 to March 2024，595 post-brittle fracture surgery patients were enrolled. Using the PDCA （plan-do-check-act） cycle，resident clinical pharmacists identified issues and conducted investigations in clinical practice. Through integrating clinical pharmacist intervention services before， during and after treatment， a medication treatment pathway was developed， thereby establishing a standardized management model for anti- osteoporosis treatment following fragility fracture surgery. Leveraging the National Brittle Fracture Big Data Platform （under the National Clinical Research Center for Orthopedics and Sports Rehabilitation）， a dedicated data module was constructed， providing big data support to evaluate the efficacy of this pharmaceutical care model. RESULTS Continuous PDCA cycle driven improvements significantly increased the proportion of osteoporosis diagnosis （from 9% before intervention to 81%） and proportion of drug treatment （from 4% to 75%）.The proportions of bone density and bone metabolism testing also rose markedly，positively impacting long-term patient outcomes. CONCLUSIONS The establishment of a standardized management model for anti- osteoporosis treatment following fragility fracture surgery by resident clinical pharmacists has enhanced clinicians’ diagnostic and therapeutic capabilities for osteoporosis， ensures rational medication use in osteoporosis patients， and demonstrates significant potential for widespread adoption and application.

Objective To verify the safety and effectiveness of a new percutaneous controllable curved plasma radiofrequency instrument for nucleus pulposus ablation. Methods A new percutaneous controllable curved plasma radiofrequency instrument were designed (controllable curved group), and its ablation effect was compared with the currently used straight head non-bendable plasma ablation instrument (non-bendable group) on gross specimens. The ablation instrument was placed through the right intervertebral foramen, and continuous ablation on the same intervertebral disc was conducted for three times. The ablation range and trajectory were recorded, and the temperature changes in the front, back, left, and right of the ablation center during and 15 seconds after ablation were monitored by the inserted temperature probe. Results There were no difference in temperature changes in the front, back, right regions of the ablation center during and 15 seconds after ablation between the two groups. The temperature changes in the left region of the ablation center both during and 15 seconds after 3rd ablation were larger than those in the non-bendable group (P＜0.01). Compared with the non-bendable group, the controllable curved group achieved angle control and larger single ablation area (2.282 5 mm² vs 1.135 8 mm², P＜0.000 1). Conclusions This new percutaneous controllable curved plasma ablation instrument can achieve angle control and ablation on the side opposite to the puncture site, increase ablation volume, and is safe.

Objective To describe and analyze the epidemiological characteristics of scrub typhus in Huai'an, Jiangsu Province from 2006 to 2024 and explore the long-term incidence trend and distribution of high-risk areas, and to formulate targeted prevention and control strategies. Methods The scrub typhus case report data of Huai'an from 2006 to 2024 in the Chinese Disease Prevention and Control Information System were extracted for descriptive analysis. Results A total of 898 cases of scrub typhus were reported in Huai'an, with an average annual incidence rate of 0.96 per 100 000 from 2006 to 2024. There was a turning point in the incidence trend of scrub typhus in 2011. From 2006 to 2011, the annual percentage change (APC) was 47.09% (95% CI: 7.53 - 859.39), and the upward trend was statistically significant (P < 0.05). From 2012 to 2024, the APC was -2.12% (95% CI: -29.09 - 3.75), and the downward trend was not statistically significant. October and November were the high-incidence months, and the total concentration from 2006 to 2024 was 0.93, indicating that scrub typhus had strict seasonality. The circular distribution method estimated that the peak period of the epidemic was from October 11th to November 25th, and the peak day of incidence was November 3rd. Jinhu County was a high-incidence area. The ratio of male to female cases was 1.03. The age group with the highest reported incidence was 40 to < 80 years old. The occupation with the highest proportion was farmers, accounting for 78.03%. Conclusion From 2006 to 2024, scrub typhus in Huai'an shows a peak every 3 - 4 years. Middle-aged and elderly farmers are the key population at risk, and Jinhu County is a key area. In the future, targeted health education should be carried out to effectively control the prevalence of scrub typhus.

Atractylodes lancea is a perennial herbaceous plant of Asteraceae, with rhizomes for medical use. However, A. lancea plants from different habitats have great variability, and the germplasm resources of A. lancea are unclear and mixed during production. Therefore, it is urgent to protect new varieties of A. lancea. The distinctness, uniformity, and stability(DUS) testing of new plant varieties is the foundation of plant variety protection, and the DUS testing guidelines are the technical basis for variety approval agencies to conduct DUS testing. In this study, the phenotypic traits of 94 germplasm accessions of A. lancea were investigated considering the breeding and variety characteristics of A. lancea in China. The traits were classified and described, and 24 traits were preliminarily determined, including 20 basic traits that must be tested and four traits selected to be tested. The 20 basic traits included 3 quality traits, 5 false quality traits, and 12 quantitative traits, corresponding to 1 plant traits, 2 stem traits, 8 leaf traits, 6 flower traits, and 3 seed traits. The measurement ranges and coefficients of variation of eight quantitative traits were determined, on the basis of which the grading criteria and codes of the traits were determined and assigned. The guidelines has guiding significance for the trait evaluation, utilization, and breeding of new varieties of A. lancea.
Atractylodes/growth & development* ; China ; Phenotype ; Guidelines as Topic ; Plant Breeding

In this study, Saccharomyces cerevisiae R0 was used as the chassis cell to synthesize oleanolic acid from scratch through the heterologous expression of β-amyrin synthase(β-AS) from Glycyrrhiza uralensis, cytochrome P450 enzyme CYP716A154 from Catharanthus roseus, and cytochrome P450 reductase AtCPR from Arabidopsis thaliana. The engineered strain R1 achieved shake flask titres of 5.19 mg·L~(-1). By overexpressing enzymes in the pentose phosphate pathway(PPP)(ZWF1, GND1, TKL1, and TAL), the NADH kinase gene in the mitochondrial matrix(POS5), truncated 3-hydroxy-3-methylglutaryl-CoA reductase(tPgHMGR1) from Panax ginseng, and farnesyl diphosphate synthase gene(SmFPS) from Salvia miltiorrhiza, the precursor supply and intracellular reduced nicotinamide adenine dinucleotide phosphate(NADPH) supply were enhanced, resulting in an 11.4-fold increase in squalene yield and a 3.6-fold increase in oleanolic acid yield. Subsequently, increasing the copy number of the heterologous genes tPgHMGR1, β-AS, CYP716A154, and AtCPR promoted the metabolic flow towards the final product, oleanolic acid, and increased the yield by three times. Shake flask fermentation data showed that, by increasing the copy number, precursor supply, and intracellular NADPH supply, the final engineered strain R3 could achieve an oleanolic acid yield of 53.96 mg·L~(-1), which was 10 times higher than that of the control strain R1. This study not only laid the foundation for the green biosynthesis of oleanolic acid but also provided a reference for metabolic engineering research on other pentacyclic triterpenoids in S. cerevisiae.
Oleanolic Acid/biosynthesis* ; Saccharomyces cerevisiae/metabolism* ; Industrial Microbiology ; Microorganisms, Genetically-Modified/metabolism* ; Plants/enzymology* ; Fermentation ; Metabolic Engineering

Many triterpenoid compounds have been successfully heterologously synthesized in Saccharomyces cerevisiae. To increase the yield of triterpenoids, various metabolic engineering strategies have been developed. One commonly applied strategy is to enhance the supply of precursors, which has been widely used by researchers. Squalene, as a precursor to triterpenoid biosynthesis, plays a crucial role in the synthesis of these compounds. This study primarily investigates the effect of different squalene levels in chassis strains on the synthesis of triterpenoids(oleanolic acid and ursolic acid), and the underlying mechanisms are further explored using real-time quantitative PCR(qPCR) analysis. The results demonstrate that the chassis strain CB-9-5, which produces high levels of squalene, inhibits the synthesis of oleanolic acid and ursolic acid. In contrast, chassis strains with moderate to low squalene production, such as Y8-1 and CNPK, are more conducive to the synthesis of oleanolic acid and ursolic acid. The qPCR analysis reveals that the expression levels of ERG1, βAS, and CrCYP716A154 in the oleanolic acid-producing strain CB-OA are significantly lower than those in the control strains C-OA and Y-OA, suggesting that high squalene production in the chassis strains suppresses the transcription of certain genes, leading to a reduced yield of triterpenoids. Our findings indicate that when constructing S. cerevisiae strains for triterpenoid production, chassis strains with high squalene content may suppress the expression of certain genes, ultimately lowering their production, whereas chassis strains with moderate squalene levels are more favorable for triterpenoid biosynthesis.
Squalene/analysis* ; Saccharomyces cerevisiae/genetics* ; Triterpenes/metabolism* ; Metabolic Engineering ; Oleanolic Acid/biosynthesis* ; Ursolic Acid

This study explored the potential therapeutic targets and mechanisms of Danggui Shaoyao San(DSS) in the prevention and treatment of Alzheimer's disease(AD) through transcriptomics and metabolomics, combined with animal experiments. Fifty male C57BL/6J mice, aged seven weeks, were randomly divided into the following five groups: control, model, positive drug, low-dose DSS, and high-dose DSS groups. After the intervention, the Morris water maze was used to assess learning and memory abilities of mice, and Nissl staining and hematoxylin-eosin(HE) staining were performed to observe pathological changes in the hippocampal tissue. Transcriptomics and metabolomics were employed to sequence brain tissue and identify differential metabolites, analyzing key genes and metabolites related to disease progression. Reverse transcription-quantitative polymerase chain reaction(RT-qPCR) was employed to validate the expression of key genes. The Morris water maze results indicated that DSS significantly improved learning and cognitive function in scopolamine(SCOP)-induced model mice, with the high-dose DSS group showing the best results. Pathological staining showed that DSS effectively reduced hippocampal neuronal damage, increased Nissl body numbers, and reduced nuclear pyknosis and neuronal loss. Transcriptomics identified seven key genes, including neurexin 1(Nrxn1) and sodium voltage-gated channel α subunit 1(Scn1a), and metabolomics revealed 113 differential metabolites, all of which were closely associated with synaptic function, oxidative stress, and metabolic regulation. RT-qPCR experiments confirmed that the expression of these seven key genes was consistent with the transcriptomics results. This study suggests that DSS significantly improves learning and memory in SCOP model mice and alleviates hippocampal neuronal pathological damage. The mechanisms likely involve the modulation of synaptic function, reduction of oxidative stress, and metabolic balance, with these seven key genes serving as important targets for DSS in the treatment of AD.
Animals ; Alzheimer Disease/genetics* ; Male ; Drugs, Chinese Herbal/administration & dosage* ; Mice ; Mice, Inbred C57BL ; Metabolomics ; Transcriptome/drug effects* ; Maze Learning/drug effects* ; Hippocampus/metabolism* ; Humans ; Disease Models, Animal ; Memory/drug effects*

The zebrafish model has attracted much attention due to its strong reproductive ability, short research cycle, and ease of maintenance. It has always been an important vertebrate model system, often used to carry out human disease research. Its motor behavior features have the advantages of being simpler, more intuitive, and quantifiable. In recent years, it has received widespread attention in the study of traditional Chinese medicine(TCM)for the treatment of sleep disorders, neurodegenerative diseases, fatigue, epilepsy, and other diseases. This paper reviews the characteristics of zebrafish motor behavior and its applications in the pharmacodynamic verification and mechanism research of TCM extracts, active ingredients, and TCM compounds, as well as in active ingredient screening and safety evaluation. The paper also analyzes its advantages and disadvantages, with the aim of improving the breadth and depth of zebrafish and its motor behavior applications in the field of TCM research.
Zebrafish/physiology* ; Medicine, Chinese Traditional ; Drugs, Chinese Herbal/therapeutic use* ; Disease Models, Animal ; Drug Evaluation, Preclinical/methods* ; Animals ; Sleep Wake Disorders/physiopathology* ; Epilepsy/physiopathology* ; Neurodegenerative Diseases/physiopathology* ; Fatigue/physiopathology* ; Behavior, Animal/physiology* ; Motor Activity/physiology*