Objective: To evaluate the performance of 5T magnetic resonance imaging (MRI) in visualizing dental pulp and periodontal ligament (PDL) tissues in vivo in the young adult population, thereby providing a basis for the application of high-field MRI technology in clinical oral examinations. Methods: The study was approved by the Ethics Committee of the hospital. A total of 15 healthy volunteers (413 permanent teeth altogether) were recruited and underwent full-mouth 5T MRI scans. Among them, six volunteers (168 permanent teeth) also received both 3T MRI and cone-beam computed tomography (CBCT) scans. Two dental specialists independently evaluated the imaging quality of the dental pulp and PDL on the images using a 5-point Likert scale and recorded the number of detectable root canals for each tooth. Inter-rater agreement was assessed using weighted kappa statistics and intraclass correlation coefficient (ICC). Non-parametric tests were employed to compare differences in imaging performance among different tissue structures, tooth positions, and imaging modalities. Results: 5T MRI can achieve in vivo imaging for most dental pulp tissues and partial periodontal membrane structures. There was a high level of agreement between the two raters in their imaging scores for the dental pulp and PDL (dental pulp κ = 0.934, PDL κ = 0.737). The imaging scores for dental pulp were significantly higher than those for PDL (P < 0.001), and the scores for molar dental pulp were lower than those for premolars and anterior teeth. In the multimodal comparison involving six volunteers, the raters showed good consistency in scoring dental pulp and PDL imaging across 5T MRI, 3T MRI, and CBCT, as well as in root canal counts (5T MRI for dental pulp κ = 0.971, 3T MRI for dental pulp κ = 0.933, CBCT for dental pulp κ = 0.964; 5T MRI for PDL κ = 0.625, 3T MRI for PDL κ = 0.667, CBCT for PDL κ = 0.571; ICC for root canal counts all ≥ 0.990). The imaging scores for dental pulp and PDL using 5T MRI were significantly higher than those using 3T MRI (dental pulp: P < 0.001; PDL: P = 0.022), but there was no statistically significant difference in the detection rate of the number of root canals between the two (P > 0.05). Although the imaging scores for dental pulp and PDL as well as the detection rate of the number of root canals with 5T MRI were inferior to those with CBCT (dental pulp: P < 0.001; PDL: P = 0.02; number of root canals: P < 0.05), 5T MRI can truly achieve "direct imaging" of these two soft tissues. Conclusion 5T MRI enables effective in vivo direct imaging of dental pulp and PDL tissues in the young adult population, indicating its potential clinical application value in the diagnosis and treatment of pulp and periodontal diseases.

ObjectiveHistorically documented Zhejiang Atractylodis Macrocephalae Rhizoma（Baizhu） possesses premium characteristics such as phoenix-like head and crane-like neck， pronounced sweetness， and fragrant aroma. However， its current market circulation is low， and the processed products with Zhejiang-style characteristics are at the risk of being lost. This study aims to preserve the ancient Zhejiang-style processing techniques and evaluate them using modern scientific methods. MethodsMultidimensional intelligent sensory evaluation was used to digitally characterize the "quality-structure" of the external appearance of nine-steamed and nine-processed Baizhu medicinal materials（intermediate processed products） and the "odor-taste" of the internal quality of its decoction pieces（slices）， and the appearance parameters were digitally characterized by colorimeter， texture analyzer， electronic nose and electronic tongue， the chemical composition was analyzed via ultra-performance liquid chromatography-quadrupole-time-of-flight mass spectrometry（UPLC-Q-TOF-MS/MS）. Then， cluster analysis on the differences in odor between the medicinal materials（intermediate processed products） and decoction pieces（slices） of nine-steamed and nine-processed Baizhu was conducted， as well as the differences in taste between water-soluble and alcohol-soluble extracts of the decoction pieces（slices）， and the correlation analysis of chroma value-alcohol-soluble extract content-component response value. ResultsThe nine-steamed and nine-processed Baizhu had a dark brown to black epidermis， a brownish-yellow to brownish-gray cross-section， a slightly tough texture， a faint odor， and a slightly sweet， bitter and pungent taste. Texture analyzer measurements revealed minimal adhesion and maximum recovery in the middle section of the characteristic processed Baizhu， consistent with the processing endpoint of thorough steaming and cooking. The head section showed the highest internal hardness， elasticity and chewiness， indicating a denser texture in this area. The electronic nose sensor could clearly distinguish the difference between the medicinal materials and its decoction pieces， with a more significant clustering effect at 60 ℃ for 30 minutes compared to ambient temperature headspace for 2 hours， highlighting the significant impact of the baking degree before slicing on the quality. The electronic tongue taste signal map clearly distinguished the differences between water-soluble and alcohol-soluble extracts of nine-steamed and nine-processed Baizhu decoction pieces， and the addition of auxiliary materials during processing could enhance its alcohol-soluble extract content. A total of 82 chemical components were identified in the characteristic processed Baizhu. After processing， the contents of 58 components increased， while 24 components decreased. Correlation analysis revealed significant negative correlations（P<0.01） between ethanol-soluble extract content and colorimetric values of brightness（L^*）， yellow-bule value（b^*）， and total color difference（E^*_ab）. E^*_ab showed marked negative correlations（P<0.05） with the response values of isochlorogenic acid A and C. ConclusionThis study establishes a modern intelligent sensory evaluation model for multidimensional holographic characterization of nine-steamed and nine-processed Baizhu， clarifying the correlation between increased isochlorogenic acid content and the visual color appearance after different steaming cycles， as well as its intrinsic alcohol-soluble extracts. This provides a reference for quality evaluation and processing standards of the Zhejiang-style characteristic processed products.

Colorectal cancer （CRC） is one of the most common cancers， with its incidence ranking high among cancers. It stands as the second leading cause of cancer-related death worldwide. In the early stages， CRC lacks specific symptoms， and most patients are diagnosed at advanced stages， making it a major research focus in the field of gastrointestinal tumors. Currently， clinical CRC treatments face several common challenges， including high surgical risks， frequent metastasis and recurrence， drug resistance， and significant side effects from chemotherapy and radiation therapy. With the development and application of traditional Chinese medicine （TCM）， it has been found that TCM and its active ingredients can effectively inhibit CRC cell proliferation， invasion， migration， and angiogenesis， and promote apoptosis and autophagy， thereby slowing the progression of CRC. This has become a key focus of CRC treatment research. Salvia Miltiorrhiza has multiple pharmacological effects， including activating blood circulation to dispel blood stasis， unlocking meridians to relieve pain， clearing heat to calm irritability， and cooling blood to reduce abscesses. It contains a variety of chemical components， including diterpenoids， phenolic acids， flavonoids， polysaccharides， nitrogen-containing compounds， steroids， and lactone compounds. This review summarized the molecular mechanisms of Salvia miltiorrhiza and its active ingredients in the treatment of CRC. It is found that these ingredients exert anti-CRC effects through various molecular mechanisms， including cell cycle arrest， promotion of apoptosis， inhibition of cell invasion and migration， induction of autophagy， suppression of tumor angiogenesis， and remodeling of the tumor microenvironment. The review aims to provide new insights for the drug development and clinical application of Salvia miltiorrhiza in CRC treatment.

To thoroughly implement the strategic deployment outlined in the Opinions of the Central Committee of the Communist Party of China and the State Council on Promoting the Inheritance and Innovative Development of Traditional Chinese Medicine regarding research on dominant diseases of traditional Chinese medicine and to uphold the development philosophy of equal emphasis on traditional Chinese medicine and western medicine，the China Association of Chinese Medicine has fully played a leading academic role by systematically organizing and conducting a series of academic youth salons on clinical dominant diseases of traditional Chinese medicine. On September 13，2024，the 36^th Youth Salon on Clinical Dominant Diseases was successfully held in Nanjing，focusing on the advantages of traditional Chinese medicine and the integrative traditional Chinese medicine and western medicine in the diagnosis and treatment of erectile dysfunction （ED）. The conference brought together leading experts from traditional Chinese medicine，western medicine，and interdisciplinary fields，facilitating in-depth multidisciplinary discussions that led to key consensus on optimizing traditional Chinese medicine treatment protocols for ED，researching and developing new drugs of traditional Chinese medicine，and advancing interdisciplinary development in traditional Chinese medicine. This salon systematically sorted out the clinical strengths and distinctive features of traditional Chinese medicine in the diagnosis and treatment of ED. Based on current research foundations and clinical needs，it identified key directions for future scientific layout and scientific research tackling： （1） Standardization of syndrome differentiation system of traditional Chinese medicine for ED. （2） Optimization and standardization of intervention methods of integrated traditional Chinese medicine and western medicine. （3） High-quality clinical research guided by evidence-based medicine. （4） In-depth analysis of the pharmacological mechanisms of traditional Chinese medicine in the treatment of ED. （5） Clinical translation and application promotion of new drugs of traditional Chinese medicine. （6） Interdisciplinary integration and innovation in traditional Chinese medicine. For each research direction，key focus areas，expected objectives，and clinical value were further refined，along with the establishment of a scientifically sound priority funding level evaluation system. Therefore，building on the series of salons on the ED-focused dominant diseases of traditional Chinese medicine，this paper provides standardized guidance for clinical practice of traditional Chinese medicine in ED management，effectively contributing to the high-quality development of traditional Chinese medicine. It serves as a valuable reference for national scientific and technological strategic layout， research and development decision-making in new drugs of traditional Chinese medicine，research topic planning，and clinical guideline formulation.

The clinical practice guidelines for Chinese patent medicines （CPM） provide reference for the selection of national drug catalogs， the formulation of prescription collections in medical institutions， and the clinical use of CPM， constituting an important part of traditional Chinese medicine （TCM） guidelines. As a crucial part of Chinese drug supply guarantee system， CPM plays an important role in the treatment， prevention， and healthcare of many disease categories， whereas the application of CPM has problems of misuse and even abuse. To standardize the application of CPM， a research team at Zhejiang Chinese Medical University developed the Reporting Items for Practice Guidelines in Healthcare for Chinese Patent Medicines （RIGHT for CPM） based on the RIGHT checklist framework. The RIGHT for CPM checklist gathers key information from published CPM guidelines， existing TCM reporting checklists， and the RIGHT checklist and its extensions to form an initial pool of reporting items. Seventeen experts from different disciplines were invited to conduct two rounds of Delphi surveys， and the final checklist was reviewed and approved for publication by 18 leading experts in TCM research and guideline reporting from China and abroad. The RIGHT for CPM checklist adds 16 sub-items and revises 2 sub-items on the basis of the RIGHT checklist， highlighting the characteristics of CPM guideline reporting. It considers CPM selection and inclusion criteria， policy access， indications and symptoms， drug combination instructions， drug use in special populations， precautions， and recommendations of Western medical physicians， among others. This can further improve the quality and transparency of CPM guideline reporting， promote standardized reporting of CPM guidelines， and facilitate the rational clinical use of CPM. This article interprets the development process of the RIGHT for CPM checklist and the items that highlight the characteristics of CPM guidelines， with a view to promoting the application of the RIGHT for CPM checklist.

ObjectiveTo clarify the anti-inflammatory and lung-protective effects of Yantiao prescription on lipopolysaccharide （LPS）-induced acute lung injury （ALI）， and to explore the impact of Yantiao prescription on the metabolic pathways of arachidonic acid （AA） in vivo. MethodsThirty male C57BL/6J mice were randomly divided into the following groups based on body weight： normal group， model group， dexamethasone group （2 mg·kg^-1）， low-dose Yantiao prescription group （18 g·kg^-1）， and high-dose Yantiao prescription group （36 g·kg^-1）， with 6 mice in each group. The ALI mouse model was established by intraperitoneal injection of LPS. The treatment groups received oral gavage once a day for 7 consecutive days， and serum and lung tissue were collected at the end of the experiment. The content of pro-inflammatory cytokines tumor necrosis factor-α （TNF-α）， interleukin-1β （IL-1β）， and interleukin-6 （IL-6） in serum was detected by enzyme-linked immunosorbent assay （ELISA）. Hematoxylin-eosin （HE） staining was used to assess lung tissue pathology. The wet/dry weight ratio （W/D） and myeloperoxidase （MPO） activity in lung tissue were measured. The content of AA metabolites in serum and lung tissue was measured by liquid chromatography triple quadrupole-mass spectrometry （LC-MS/MS）. ResultsCompared with the conditions in the normal group， the content of serum pro-inflammatory cytokines TNF-α， IL-1β， and IL-6 in the model group was significantly increased （P<0.01）. The alveolar structure in mice was severely damaged， with markedly thickened alveolar walls and extensive inflammatory cell infiltration. The W/D ratio and MPO activity in lung tissue were significantly increased （P<0.01）. The content of AA metabolites， including prostaglandin D₂ （PGD₂）， prostaglandin E₂ （PGE₂）， 11（S）-hydroxy-eicosatetraenoic acid ［11（S）-HETE］， and 5-hydroxy-eicosatetraenoic acid （5-HETE） in serum and lung tissue was significantly increased （P<0.05）， while the content of 11，12-epoxyeicosatrienoic acid （11，12-EET） and 14，15-epoxyeicosatrienoic acid （14，15-EET） in serum was significantly decreased （P<0.01）. Compared with the results in the model group， the content of serum pro-inflammatory cytokines TNF-α， IL-1β， and IL-6 in the dexamethasone group， low-dose Yantiao prescription group， and high-dose Yantiao prescription group was significantly reduced （P<0.05）. Mild thickening of alveolar walls， scattered inflammatory cell infiltration， and relatively intact tissue structure with improved alveolar architecture were observed. The W/D ratio and MPO activity in lung tissue were significantly reduced （P<0.01）. The content of AA metabolites PGD₂， PGE₂， 11（S）-HETE， and 5-HETE in serum from the dexamethasone group was significantly decreased （P<0.05）， while the content of 14，15-EET in serum significantly increased （P<0.01）， and the content of 5-HETE in lung tissue significantly decreased （P<0.01）. In the low-dose and high-dose Yantiao prescription groups， the content of AA metabolites PGD₂， PGE₂， 11（S）-HETE， and 5-HETE in serum and lung tissue was significantly decreased （P<0.05）， while the content of 11，12-EET in both serum and lung tissue was significantly increased （P<0.05）. ConclusionYantiao prescription has significant protective effects against LPS-induced ALI， which are related to its regulation of AA metabolic pathways in vivo.

Objective By combining biological detection and imaging evaluation, a clinical prediction model is constructed based on a large cohort to improve the accuracy of distinguishing between benign and malignant pulmonary nodules. Methods A retrospective analysis was conducted on the clinical data of the 32 627 patients with pulmonary nodules who underwent chest CT and testing for 7 types of lung cancer-related serum autoantibodies (7-AABs) at our hospital from January 2020 to April 2024. The univariate and multivariate logistic regression models were performed to screen independent risk factors for benign and malignant pulmonary nodules, based on which a nomogram model was established. The performance of the model was evaluated using receiver operating characteristic (ROC) curves, calibration curves, and decision curve analysis (DCA). Results A total of 1 017 patients with pulmonary nodules were included in the study. The training set consisted of 712 patients, including 291 males and 421 females, with a mean age of (58±12) years. The validation set included 305 patients, comprising 129 males and 176 females, with a mean age of (58±13) years. Univariate ROC curve analysis indicated that the combination of CT and 7-AABs testing achieved the highest area under the curve (AUC) value (0.794), surpassing the diagnostic efficacy of CT alone (AUC=0.667) or 7-AABs alone (AUC=0.514). Multivariate logistic regression analysis showed that radiological nodule diameter, nodule nature, and CT combined with 7-AABs detection were independent predictors, which were used to construct a nomogram prediction model. The AUC values for this model were 0.826 and 0.862 in the training and validation sets, respectively, demonstrating excellent performance in DCA. Conclusion The combination of 7-AABs with CT significantly enhances the accuracy of distinguishing between benign and malignant pulmonary nodules. The developed predictive model provides strong support for clinical decision-making and contributes to achieving precise diagnosis and treatment of pulmonary nodules.

With the widespread adoption of low-dose CT screening and the extensive application of high-resolution CT, the detection rate of sub-centimeter lung nodules has significantly increased. How to scientifically manage these nodules while avoiding overtreatment and diagnostic delays has become an important clinical issue. Among them, lung nodules with a consolidation tumor ratio less than 0.25, dominated by ground-glass shadows, are particularly worthy of attention. The therapeutic challenge for this group is how to achieve precise and complete resection of nodules during surgery while maximizing the preservation of the patient's lung function. The "watershed topography map" is a new technology based on big data and artificial intelligence algorithms. This method uses Dicom data from conventional dose CT scans, combined with microscopic (22-24 levels) capillary network anatomical watershed features, to generate high-precision simulated natural segmentation planes of lung sub-segments through specific textures and forms. This technology forms fluorescent watershed boundaries on the lung surface, which highly fit the actual lung anatomical structure. By analyzing the adjacent relationship between the nodule and the watershed boundary, real-time, visually accurate positioning of the nodule can be achieved. This innovative technology provides a new solution for the intraoperative positioning and resection of lung nodules. This consensus was led by four major domestic societies, jointly with expert teams in related fields, oriented to clinical practical needs, referring to domestic and foreign guidelines and consensus, and finally formed after multiple rounds of consultation, discussion, and voting. The main content covers the theoretical basis of the "watershed topography map" technology, indications, operation procedures, surgical planning details, and postoperative evaluation standards, aiming to provide scientific guidance and exploration directions for clinical peers who are currently or plan to carry out lung nodule resection using the fluorescent microscope watershed analysis method.

ObjectiveTo elucidate the critical role of rehabilitation medical records (including electronic records) in rehabilitation medicine's clinical practice and management, comprehensively analyzed the structure, core content and data standards of rehabilitation medical records, to develop a standardized medical record data architecture and core dataset suitable for rehabilitation medicine and to explore the application of rehabilitation data in performance evaluation and payment. MethodsBased on the regulatory documents Basic Specifications for Medical Record Writing and Basic Specifications for Electronic Medical Records (Trial) issued by National Health Commission of China, and referencing the World Health Organization (WHO) Family of International Classifications (WHO-FICs) classifications, International Classification of Diseases (ICD-10/ICD-11), International Classification of Functioning, Disability and Health (ICF), and International Classification of Health Interventions (ICHI Beta-3), this study constructed the data architecture, core content and data standards for rehabilitation medical records. Furthermore, it explored the application of rehabilitation record summary sheets (home page) data in rehabilitation medical statistics and payment methods, including Diagnosis-related Groups (DRG), Diagnosis-Intervention Packet (DIP) and Case Mix Index. ResultsThis study proposed a systematic standard framework for rehabilitation medical records, covering key components such as patient demographics, rehabilitation diagnosis, functional assessment, rehabilitation treatment prescriptions, progress evaluations and discharge summaries. The research analyzed the systematic application methods and data standards of ICD-10/ICD-11, ICF and ICHI Beta-3 in the fields of medical record terminology, coding and assessment. Constructing a standardized data structure and data standards for rehabilitation medical records can significantly improve the quality of data reporting based on the medical record summary sheet, thereby enhancing the quality control of rehabilitation services, effectively supporting the optimization of rehabilitation medical insurance payment mechanisms, and contributing to the establishment of rehabilitation medical performance evaluation and payment based on DRG and DIP. ConclusionStructured rehabilitation records and data standardization are crucial tools for quality control in rehabilitation. Systematically applying the three reference classifications of the WHO-FICs, and aligning with national medical record and electronic health record specifications, facilitate the development of a standardized rehabilitation record architecture and core dataset. Standardizing rehabilitation care pathways based on the ICF methodology, and developing ICF- and ICD-11-based rehabilitation assessment tools, auxiliary diagnostic and therapeutic systems, and supporting terminology and coding systems, can effectively enhance the quality of rehabilitation records and enable interoperability and sharing of rehabilitation data with other medical data, ultimately improving the quality and safety of rehabilitation services.

In the field of oral medicine, 3D-printed individualized titanium mesh technology is gradually becoming an important means for the treatment of severe alveolar bone defect augmentation. This article provides a comprehensive analysis of the advantages of this technology, the evaluation of osteogenic effects, and the progress of research in clinical applications. In response to the current issue of variability in bone augmentation outcomes, this paper delves into multiple factors affecting bone augmentation effects, including individualized titanium mesh design (involving the thickness, pore size, pore shape, porosity, contour shape, selection of titanium alloy materials, and 3D printing technology), intraoperative procedures (the accuracy of placement during 3D-printed individualized titanium mesh surgery), and postoperative care (including the prevention of complications, formation of pseudoperiosteum, and stability of the titanium mesh). By integrating the clinical experience and research findings of our team, we propose a series of targeted optimization strategies, including designing, manufacturing, and clinically applying self-positioning individualized titanium meshs (positioning wings + individualized titanium meshs) to improve the positioning accuracy of the titanium mesh; propose individualized treatment processes and titanium mesh design schemes based on specific conditions of alveolar bone defects and soft tissue status; and emphasize the importance of long-term stable fixation of the titanium mesh to reduce the risk of postoperative mesh loosening and displacement. In addition, we appropriately summarize the evaluation methods for the bone augmentation effects of 3D-printed individualized titanium meshes, covering the following key indicators: (1) vertical bone augmentation and horizontal bone augmentation; (2) changes in bone contour morphology; (3) bone volume increase; (4) clinical indicators (surgical success rate, titanium mesh exposure, infection rate, and postoperative recovery); (5) aesthetic effect evaluation; (6) long-term stability; (7) radiological assessment; (8) patient satisfaction; and (9) precision of surgical operation, aiming to assist doctors in comprehensively assessing and in-depth analyzing the surgical outcomes to achieve the best therapeutic effects. The purpose of this article is to provide a reference for the optimization and clinical application of 3D-printed individualized titanium mesh technology and to lay a theoretical foundation for achieving the best osteogenic effects.