Objective: To evaluate the performance of supplemental automated breast ultrasound (ABUS) added to mammography-based breast cancer screening for women with nondense breasts. Materials and Methods: A retrospective search of radiology databases at two tertiary institutions identified asymptomatic women with nondense breasts who underwent breast cancer screening using both digital mammography (DM) and supplemental ABUS between January 2020 and December 2023. We excluded women without sufficient follow-up data or those without an established final diagnosis, including histopathologic results. The performance measures of DM alone and ABUS combined with DM (ABUS plus DM) were compared. The primary outcome was the cancer detection rate (CDR), and the secondary outcomes were sensitivity and specificity. Subgroup analyses were performed for women with scattered fibroglandular density and almost entirely fatty breasts. Results: A total of 2,904 pairs of screening examinations were performed in 1,683 women (59 ± 10 years), detecting 26 cancers. In comparison with DM alone, ABUS plus DM showed higher CDR (9.0 vs. 7.9 per 1,000 examinations, P < 0.001), higher sensitivity (100% [26/26] vs. 88.5% [23/26], P < 0.001), and lower specificity (95.0% [2,735/2,878] vs. 97.9% [2,817/2,878], P < 0.001). In women with scattered fibroglandular density, ABUS increased the CDR from 7.4 to 8.5 per 1,000 examinations and improved the sensitivity from 87.0% [20/23] to 100% [23/23] (P < 0.001). In women with almost entirely fatty breasts, ABUS plus DM showed the same CDR (16.4 per 1,000 examinations) and sensitivity (100% [3/3]) as DM alone. Three cancers (11.5% [3/26]), all of which were stage T1N0, were detected only by supplemental ABUS. Conclusion Supplemental ABUS improved cancer detection and sensitivity in women with nondense breasts, with the benefits primarily observed in those with scattered fibroglandular density.

Regenerative therapy in the foot and ankle region has attracted attention, with magnetic resonance imaging (MRI) playing an increasingly important role. Biochemical MRI techniques, such as T2 mapping, T2* mapping, delayed gadolinium-enhanced MRI of cartilage (dGEMRIC), and sodium imaging, are being assessed as promising tools for cartilage assessment. These methods can quantitatively analyze the water content, collagen structure, and glycosaminoglycan content in cartilage, providing valuable information for assessing the quality of regenerated cartilage. Quantitative analysis using the signal-to-noise ratio has been attempted in a ligament evaluation. Recent studies have shown that T2* mapping can quantify ankle instability and correlate with the clinical findings. Various techniques, such as dynamic contrast-enhanced MRI, diffusion tensor imaging, T2 mapping, and T2* mapping, are being assessed for a tendon assessment, particularly in the Achilles tendon. These methods can be used to analyze quantitatively the vascular regeneration and healing processes of microstructure. Although some of these advanced MRI techniques are still in the research stage, they are expected to play a crucial role in non-invasively evaluating the effects of regenerative therapies in the foot and ankle field. Future research will optimize the MRI protocols specific to each tissue type and validate the clinical efficacy. This review describes the latest MRI techniques for evaluating the regeneration of ankle cartilage, ligaments, and tendons and introduces future research directions.

Background: s/Aims: Artificial intelligence (AI) technology has been used to assess surgery quality, educate, and evaluate surgical performance using video recordings in the minimally invasive surgery era. Much attention has been paid to automating surgical workflow analysis from surgical videos for an effective evaluation to achieve the assessment and evaluation. This study aimed to design a deep learning model to automatically identify surgical phases using laparoscopic cholecystectomy videos and automatically assess the accuracy of recognizing surgical phases. Methods: One hundred and twenty cholecystectomy videos from a public dataset (Cholec80) and 40 laparoscopic cholecystectomy videos recorded between July 2022 and December 2022 at a single institution were collected. These datasets were split into training and testing datasets for the AI model at a 2:1 ratio. Test scenarios were constructed according to structural characteristics of the trained model. No pre- or post-processing of input data or inference output was performed to accurately analyze the effect of the label on model training. Results: A total of 98,234 frames were extracted from 40 cases as test data. The overall accuracy of the model was 91.2%. The most accurate phase was Calot’s triangle dissection (F1 score: 0.9421), whereas the least accurate phase was clipping and cutting (F1 score:0.7761). Conclusions Our AI model identified phases of laparoscopic cholecystectomy with a high accuracy.

Background: s/Aims: Artificial intelligence (AI) technology has been used to assess surgery quality, educate, and evaluate surgical performance using video recordings in the minimally invasive surgery era. Much attention has been paid to automating surgical workflow analysis from surgical videos for an effective evaluation to achieve the assessment and evaluation. This study aimed to design a deep learning model to automatically identify surgical phases using laparoscopic cholecystectomy videos and automatically assess the accuracy of recognizing surgical phases. Methods: One hundred and twenty cholecystectomy videos from a public dataset (Cholec80) and 40 laparoscopic cholecystectomy videos recorded between July 2022 and December 2022 at a single institution were collected. These datasets were split into training and testing datasets for the AI model at a 2:1 ratio. Test scenarios were constructed according to structural characteristics of the trained model. No pre- or post-processing of input data or inference output was performed to accurately analyze the effect of the label on model training. Results: A total of 98,234 frames were extracted from 40 cases as test data. The overall accuracy of the model was 91.2%. The most accurate phase was Calot’s triangle dissection (F1 score: 0.9421), whereas the least accurate phase was clipping and cutting (F1 score:0.7761). Conclusions Our AI model identified phases of laparoscopic cholecystectomy with a high accuracy.

Background: s/Aims: Artificial intelligence (AI) technology has been used to assess surgery quality, educate, and evaluate surgical performance using video recordings in the minimally invasive surgery era. Much attention has been paid to automating surgical workflow analysis from surgical videos for an effective evaluation to achieve the assessment and evaluation. This study aimed to design a deep learning model to automatically identify surgical phases using laparoscopic cholecystectomy videos and automatically assess the accuracy of recognizing surgical phases. Methods: One hundred and twenty cholecystectomy videos from a public dataset (Cholec80) and 40 laparoscopic cholecystectomy videos recorded between July 2022 and December 2022 at a single institution were collected. These datasets were split into training and testing datasets for the AI model at a 2:1 ratio. Test scenarios were constructed according to structural characteristics of the trained model. No pre- or post-processing of input data or inference output was performed to accurately analyze the effect of the label on model training. Results: A total of 98,234 frames were extracted from 40 cases as test data. The overall accuracy of the model was 91.2%. The most accurate phase was Calot’s triangle dissection (F1 score: 0.9421), whereas the least accurate phase was clipping and cutting (F1 score:0.7761). Conclusions Our AI model identified phases of laparoscopic cholecystectomy with a high accuracy.

Purpose: This study devised triple tension band wirings (TTBW) fixation in patients with comminuted patella fractures to compare the clinical result of TTBW with that of tension band wiring (TBW). Materials and Methods: This study was conducted on 91 patients who had undergone surgery diagnosed with acute patella fracture from January 2011 to December 2016. The study included 51 double TBW patients (Group 1) and 40 patients with TTBW (Group 2). Results: Five out of 51 cases had a loss of reduction and fixation failure in Group 1, and no failure of fracture formation healing occurred in Group 2. Nonunion was noted in one case in Group 1 and no case in Group 2. Eight K-wire migration cases were observed in Group 1, which was not observed in Group 2. Six patients in Group 1 underwent revisional surgery. No patients in Group 2 had a reoperation. As a result of a one-year follow-up after the operation, the mean range of motion of the knee joint in groups 1 and 2 was 128.3°±11.3° and 127.9°±10.8°, respectively. The Lysholm’s scores for groups 1 and 2 were 90.8±4.2 and 90.3±3.8 points, respectively, which was not statistically significant. Conclusion TTBW is a helpful technique for the surgical treatment of comminuted patella fractures. The TTBW method has less reoperation due to nonunion and fixation failure. After a one-year followup, the clinical results were similar to the conventional TBW method.

Purpose: To evaluate the results of intramedullary nailing with sliding restriction and dynamization methods in treating intertrochanteric fractures. Materials and Methods: From August 2016 to March 2019, patients aged 65 years and older who underwent intramedullary nailing in treating intertrochanteric fractures were enrolled in this study. The radiological and clinical results were analyzed in 49 patients who had undergone lag screw sliding re-striction and dynamization of the distal interlocking screw method. Results: Forty-seven patients achieved union without complications (95.9%). The mean union period was 6.5 weeks (range, 6-9 weeks). Complications occurred in two patients (4.1%), including the cut through of the lag screw in one patient and varus deformity of more than 10° in the other. The preinjury mean Koval grade was 2.8 (range, 1-7). The mean was 3.3 (range, 1-7) at the final follow-up, and the mean difference was 0.5 (range, 0-2). Conclusion Intramedullary nailing with a sliding restriction and dynamization method for treating in-tertrochanteric fractures achieved union. The reduction achieved during surgery was maintained with good clinical results. This method is a safe and effective treatment technique for femoral intertrochanteric fractures.

Background: We aimed to investigate the current trend of joint replacement surgery incidence in patients with rheumatoid arthritis (RA) in South Korea and to compare the incidence of joint replacement surgery in each affected joint. Methods: We performed this big data analysis to investigate the current trend of joint replacement surgery incidence in patients with RA in South Korea and to compare the incidence of joint replacement surgery in each affected joint. This retrospective study was based on data from the Korea National Health Insurance claims database. Results: The prevalence of RA increased every year (0.13% in 2008, 0.25% in 2016). The number of newly diagnosed patients increased from 29,184 in 2010 to 38,347 in 2016. The incidence rate of joint replacement surgery in patients with RA increased from 0.72% in 2010 to 4.03% in 2016. The knee (68.3%) was the most commonly replaced joint. The relative risk (RR) of additional joint replacement surgery was highest for the shoulder joint (RR,1.454; 95% confidence interval, 0.763–2.771). The median time from diagnosis to surgery was the shortest in the elbow joint (379 days) and the longest in the shoulder joint (955 days). The median time for each joint was short in order of the elbows, ankles, hips, knees, and shoulders (p < 0.01). Conclusions The most frequently and initially replaced joints were different, but the prevalence and incidence of RA, as well as those of joint replacement surgery, have recently increased in South Korea. Joint replacement surgery in RA was the highest for the knee joint. The median time from diagnosis to surgery was shortest for the elbow, followed by the ankle, hip, knee, and shoulder. Regardless of whether patients are symptomatic, evaluation of large joints such as the knee, elbow, ankle, and hip should be considered from an early stage.

Purpose: To compare the short-term clinical and radiologic outcomes of combined posterior cruciate ligament (PCL) and posterolateral complex (PLC) reconstruction to those of isolated PCL reconstruction (PCLR) for patients with posterolateral knee laxity less than grade III. Materials and Methods: We retrospectively reviewed 49 patients (51 knees) who underwent PCLR between January 2008 and December 2015. Patients with a minimum follow-up of 24 months were included and divided into two groups (group A, isolated PCLR; group B, combined PCL and PLC reconstruction). Clinical outcomes were evaluated as the International Knee Documentation Committee (IKDC) subjective, Lysholm, and Tegner activity scale scores. Radiologic outcomes were also assessed using the side-to-side differences in posterior tibial translation via stress radiographs. Results: A total of 30 cases were analyzed. There were no significant differences in the Lysholm and Tegner activity scale scores between the two groups preoperatively and at the final follow-up. However, group B showed a higher IKDC subjective score compared to group A at the final follow-up (group A, 72.8±8.9; group B, 77.7±10.1; p<0.05). Regarding the radiologic outcomes, group B also showed a significantly less side-to-side difference in posterior tibial translation compared to group A at the final follow-up (group A, 4.8±2.3 mm; group B, 3.8±2.1 mm; p<0.05). Conclusion Combined PCL and PLC reconstruction resulted in improved clinical and radiologic outcomes than isolated PCLR in patients who have less than grade III posterolateral laxity of the knee. In cases of PCL rupture with ambiguous PLC injury, combined PCL and PLC reconstruction may help to improve posterior residual laxity of the knee.