In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

In this paper， by referring to ancient and modern literature， the textual research of Inulae Flos has been conducted to clarify the name， origin， production area， quality evaluation， harvesting， processing and others， so as to provide reference and basis for the development and utilization of famous classical formulas containing this herb. After textual research， it could be verified that the medicinal use of Inulae Flos was first recorded in Shennong Bencaojing of the Han dynasty. In successive dynasties， Xuanfuhua has been taken as the official name， and it also has other alternative names such as Jinfeicao， Daogeng and Jinqianhua. The period before the Song and Yuan dynasties， the main origin of Inulae Flos was the Asteraceae plant Inula japonica， and from the Ming and Qing dynasties to the present， I. japonica and I. britannica are the primary source. In addition to the dominant basal species， there are also regional species such as I. linariifolia， I. helianthus-aquatili， and I. hupehensis. The earliest recorded production areas in ancient times were Henan， Hubei and other places， and the literature records that it has been distributed throughout the country since modern times. The medicinal part is its flower， the harvesting and processing method recorded in the past dynasties is mainly harvested in the fifth and ninth lunar months， and dried in the sun， and the modern harvesting is mostly harvested in summer and autumn when the flowers bloom， in order to remove impurities， dry in the shade or dry in the sun. In addition， the roots， whole herbs and aerial parts are used as medicinal materials. In ancient times， there were no records about the quality of Inulae Flos， and in modern times， it is generally believed that the quality of complete flower structure， small receptacles， large blooms， yellow petals， long filaments， many fluffs， no fragments， and no branches is better. Ancient processing methods primarily involved cleaning， steaming， and sun-drying， supplemented by techniques such as boiling， roasting， burning， simmering， stir-frying， and honey-processing. Modern processing focuses mainly on cleaning the stems and leaves before use. Regarding the medicinal properties， ancient texts describe it as salty and sweet in taste， slightly warm in nature， and mildly toxic. Modern studies characterize it as bitter， pungent， and salty in taste， with a slightly warm nature. Its therapeutic effects remain consistent across eras， including descending Qi， resolving phlegm， promoting diuresis， and stopping vomiting. Based on the research results， it is recommended that when developing famous classical formulas containing Inulae Flos， either I. japonica or I. britannica should be used as the medicinal source. Processing methods should follow formula requirements， where no processing instructions are specified， the raw products may be used after cleaning.

ObjectiveThe widespread adoption of portable fundus cameras for primary care and community screening is hindered by limitations in current autofocus(AF) technologies. Image-based methods relying on sharpness evaluation require iterative searches, resulting in slow convergence, while projection-based techniques are susceptible to optical artifacts and calibration errors. To address these challenges, this study introduces a novel AF system based on direct wavefront sensing, designed to deliver simultaneous high speed, high precision, and operational robustness within the compact form factor essential for portable ophthalmic devices. MethodsOur approach fundamentally reimagines the AF process by directly measuring the ocular wavefront aberration. We developed a custom portable fundus camera integrating a miniaturized Shack-Hartmann wavefront sensor (SHWS) into the optical path. An 850 nm laser diode projects a point source onto the retina via oblique illumination to minimize corneal reflections. Light scattered from this spot carries the eye’s refractive error through the imaging optics and is directed to the SHWS, positioned at a plane optically conjugate to the primary color CMOS imaging sensor. A microlens array within the SHWS samples the incident wavefront, generating a pattern of focal spots on a CCD. Real-time centroid analysis of these spots provides a map of local wavefront slopes. These measurements are processed through a singular value decomposition (SVD) algorithm to fit a Zernike polynomial basis set, enabling real-time reconstruction of the wavefront phase. The defocus component (S) is extracted from the second-order Zernike coefficients, providing a direct, quantitative measure of the refractive error in diopters. This value serves as a precise error signal in a closed-loop control system, which commands a voice-coil actuated focusing lens to its null position in a single, deterministic step, eliminating the need for iterative search algorithms. ResultsComprehensive evaluation demonstrated the system’s high performance. Testing on a calibrated model eye (OEMI-7) established a highly linear relationship between the computed defocus S and the focusing lens position across a ±20 Diopter (D) compensation range, achievable within a 5 mm mechanical travel. The system achieved a focusing precision of 0.08 D, corresponding to an 18-fold improvement over a conventional projection spot-size method tested under identical conditions. The total focus acquisition time, encompassing wavefront measurement, computation, and lens actuation, averaged under 0.5 s. Clinical validation with 25 human volunteers (50 eyes, refractive range -15 D to +10 D) confirmed practical efficacy. The wavefront-sensing AF succeeded in 92% of attempts with a mean time of 0.5 s, substantially outperforming a projection-based benchmark which achieved only a 32% success rate with an average time of 4.25 s. The system provided instantaneous directional guidance and maintained stability during minor ocular movements. Objective assessment of image quality, via amplitude contrast of retinal vasculature, showed consistent and significant enhancement following AF correction across the entire tested diopter range. ConclusionThis work successfully implements and validates a direct wavefront-sensing autofocus paradigm for portable fundus cameras. By directly quantifying and compensating for the optical defocus aberration, this method bypasses the fundamental limitations of image-processing and projection-based techniques, enabling rapid, precise, and deterministic diopter compensation. The developed system delivers an exceptional combination of a wide operational range (±20 D), high accuracy (0.08 D), fast convergence (0.5 s), and a compact physical footprint. This technology provides a practical and high-performance focusing solution capable of enhancing the reliability, throughput, and diagnostic utility of portable retinal imaging in large-scale screening applications. Future efforts will be directed towards system cost optimization and performance adaptation for diverse ocular conditions.

BACKGROUND: Bone defects are commonly encountered due to accidents, diseases, or aging, and the demand for effective bone regeneration, particularly for dental implants, is increasing in our aging society. Mesenchymal stem cells (MSCs) are promising candidates for regenerative therapies; however, obtaining sufficient quantities of these cells for clinical applications remains challenging. DW-MSCs, derived from embryonic stem cells and developed by Daewoong Pharmaceutical, exhibit a robust proliferative capacity even after extensive culture. METHODS: This study explores the therapeutic potential of DW-MSCs in various animal models of bone defects. DWMSCs were expanded for over 13 passages for in vivo use in rat and canine models of bone defects and osteomyelitis. The research focused on the in vivo osteogenic differentiation of DW-MSCs, the establishment of a fibrin-based system for bone regeneration, the assessment of bone repair following treatment in animal models, and comparisons with commercially available bone grafts. RESULTS: Results showed that DW-MSCs exhibited superior osteogenic differentiation compared to other materials, and the fibrinization process not only preserved but enhanced their proliferation and differentiation capabilities through a 3D culture effect. In both bone defect models, DW-MSCs facilitated significant bone regeneration, reduced inflammatory responses in osteomyelitis, and achieved effective bone healing. The therapeutic outcomes of DW-MSCs were comparable to those of commercial bone grafts but demonstrated qualitatively superior bone tissue restructuring. CONCLUSION Our findings suggest that DW-MSCs offer a promising approach for bone regeneration therapies due to their high efficacy and anti-inflammatory properties.

Background: Histone deacetylase (HDAC) inhibition offers potential anticancer effects across diverse cancers due to HDAC's significant role in cancer development and progression. Consequently, we demonstrated the therapeutic efficacy of the novel HDAC inhibitor, CG-745, in comparison with existing inhibitors such as suberoylanilide hydroxamic acid (SAHA) in non-small cell lung cancer (NSCLC) cells. Methods: CG-745's effect on apoptosis and reactive oxygen species (ROS)-dependent mitochondrial dysfunction was investigated using annexin V assay, MitoSoX, and Western blot in human A549 and H460 cells. Additionally, HDAC expression was analyzed through real-time polymerase chain reaction. We also evaluated the inhibitory effect of CG-745 on epithelial-mesenchymal transition (EMT) induced by transforming growth factor β1 (TGF-β1) via Western blot, scratch analysis, and matrigel invasion analysis. Results: Compared to SAHA, CG-745 inhibited cell viability and mRNA expression of HDACs such as HDAC1, HDAC2, HDAC3, and HDAC8. It also induced apoptosis, ROS, and mitochondrial dysfunction in a concentration-dependent manner. CG-745 reversed EMT triggered by TGF-β1 in A549 and H460 cells, and curtailed the migration and invasion enhanced by TGF-β1. CG-745 has demonstrably inhibited EMT and induced apoptosis in NSCLC cells. Conclusion CG-745 may represent a novel therapeutic strategy for NSCLC treatment.

Objective: This study aims to objectively evaluate turning gait parameters in Parkinson’s disease (PD) patients using 2D-RGB video-based analysis and explore their relationships with imbalance. Methods: We prospectively enrolled PD patients for clinical assessment, balance analysis and gait with 180º turning. Spatiotemporal gait parameters during turning were derived using video-based analysis and correlated with modified Hoehn and Yahr (mHY) stages and center of pressure (COP) oscillations. Results: A total of 64 PD patients were enrolled. The PD patients with higher mHY stages (≥2.5) had significantly longer turning times, greater numbers of steps, wider step bases and less variability in step length during turns. COP oscillations were positively correlated with the mean turning time on both the anterior-posterior and right-left axes. Conclusion Spatiotemporal gait parameter during turning, derived from video-based gait analysis, may represent apromising biomarker for monitoring postural instability in PD patients.

Objective: Gaits constitute the most fundamental and common form of human locomotion and are essential in daily activities. We aimed to investigate gait parameters in medically and cognitively healthy older adults to determine the independent effects of age, physical attributes, and cognition on these parameters. Methods: This retrospective study enrolled healthy older adult participants aged 50 years or older with normal cognition and no neurological symptoms or medical/surgical history that could affect gait. Quantitative gait analysis was conducted via the GAITRite Electronic Walkway, which categorizes gait parameters into spatiotemporal, spatial, temporal, phase, and variability. Gait parameters were compared between sexes across different age groups. The independent effects of age, Mini-Mental State Examination score, and physical characteristics were analyzed via a multiple regression model. Results: This study included 184 participants with an average age of 72.2 years. After adjusting for age, height, and footwear, only the base width and its variability differed between the sexes. Gait parameters varied significantly among different age groups, revealing multiple interparameter associations. Age was independently correlated with decreased velocity, step and stride lengths, single support time percentage and increased double support time, double support time percentage, and variability parameters, excluding the coefficient of variance of base width. Height was positively correlated with velocity, step and stride lengths, and base width, whereas leg length was negatively associated with cadence and positively associated with temporal parameters of gait. Conclusion Gait parameters in healthy older adults were not only associated with age and physical characteristics but also had interparameter correlations.

Objective: We conducted this study to assess the efficacy and safety of taltirelin hydrate (TH) in patients with ataxia due to spinocerebellar degeneration (SCD). Methods: Patients were randomly assigned to either the taltirelin group (5 mg orally, twice daily) or the control group. The primary endpoint was the change in the Korean version of the Scale for the Assessment and Rating of Ataxia (K-SARA) score at 24 weeks. The secondary endpoints included changes in the K-SARA score at 4 and 12 weeks as well as the Clinical Global Impression Scale, the five-level version of the EuroQol five-dimensional questionnaire, the Tinetti balance test, and gait analysis at 4, 12, and 24 weeks. Results: A total of 149 patients (hereditary:nonhereditary=86:63) were enrolled. There were significant differences in the change in the K-SARA score at 24 weeks from baseline between the taltirelin group and the control group (-0.51±2.79 versus 0.36±2.62, respectively; p=0.0321). For the K-SARA items, the taltirelin group had significantly lower “Stance” and “Speech disturbance” subscores than the control group (-0.04±0.89 versus 0.23±0.79 and -0.07±0.74 versus 0.18±0.67; p=0.0270 and 0.0130, respectively). However, there were no significant differences in changes in other secondary efficacy outcome measures at 24 weeks from baseline between the two treatment arms (p>0.05). Conclusion Clinicians might consider the use of TH in the treatment of patients with ataxia due to SCD.

Background: Although an appropriate weight management strategy is essential for obese individuals, weight loss can have adverse effects on bone mineral density (BMD). We conducted a systematic review of randomized controlled trials to evaluate changes in BMD after the implementation of various weight loss strategies. Methods: The PubMed, Embase, Web of Science, and Cochrane Library databases were searched to find articles published from database inception until June 2023. Randomized controlled trials of various treatments for obese patients that reported changes in BMD were selected. The primary outcome was BMD of the whole body, lumbar spine, and total hip, measured using dual X-ray absorptiometry. Results: Eighteen randomized controlled trials involving 2,510 participants with obesity were included in the analysis. At follow-up examination, the BMD of the lumbar spine decreased significantly after metabolic surgery (mean difference [MD]= –0.40 g/cm2 ; 95% confidence interval [CI], –0.73 to –0.07; I2 = 0%); lifestyle and pharmacological interventions did not result in a significant decrease in BMD at any location. Metabolic surgery also produced the most substantial difference in weight, with an MD of –3.14 (95% CI, –3.82 to –2.47). Conclusion This meta-analysis is the first to examine the effects of all categories of anti-obesity strategies, including the use of anti-obesity medications, on BMD. Bariatric metabolic surgery can have adverse effects on BMD. Moreover, medications can be used as a treatment for weight loss without compromising bone quality.

To ensure high-quality bioresources and standardize biobanks, there is an urgent need to develop and disseminate educational training programs in accordance with ISO 20387, which was developed in 2018. The standardization of biobank education programs is also required to train biobank experts. The subdivision of categories and levels of education is necessary for jobs such as operations manager (bank president), quality manager, practitioner, and administrator. Essential training includes programs tailored for beginner, intermediate, and advanced practitioners, along with customized training for operations managers. We reviewed and studied ways to develop an appropriate range of education and training opportunities for standard biobanking education and the training of experts based on KS J ISO 20387. We propose more systematic and professional biobanking training programs in accordance with ISO 20387, in addition to the certification programs of the National Biobank and the Korean Laboratory Accreditation System. We suggest various training programs appropriate to a student’s affiliation or work, such as university biobanking specialized education, short-term job training at unit biobanks, biobank research institute symposiums by the Korean Society of Pathologists, and education programs for biobankers and researchers. Through these various education programs, we expect that Korean biobanks will satisfy global standards, meet the needs of users and researchers, and contribute to the advancement of science.