BACKGROUND:The surgical treatment of severe lumbar fractures is mainly based on posterior short-segment fixation,and different pedicle screw fixation methods have differences in biomechanical properties.OBJECTIVE:To simulate three different screw fixation techniques in the treatment of severe L1 vertebral fractures using three-dimensional finite element technology,and to compare and analyze the biomechanical characteristics of the upper and lower intervertebral discs,fractured vertebrae,and internal fixation devices during the simulated spinal movement.METHODS:A three-dimensional model of the T11-L3 spine was established to simulate severely unstable fracture of the lumbar 1 vertebral body using the designed three pedicle screw fixation methods:Model A with 4 traditional pedicle screws(2 in each T12 and L2),model B with 4 Universal Spine System pedicle screws(2 in each T12 and L2),and Model C were bilateral intermediate fixation with 6 pedicle screws(2 in each of T12,L1,and L2).Restraint and load were applied to simulate the maximum stress and maximum displacement of the internal fixation,the displacement of the L1 vertebral body,and stress on the intervertebral discs superior and inferior to the injured vertebra during the anterior flexion,posterior extension,left-sided bending,right-sided bending and left-right rotation of the lumbar spine.RESULTS AND CONCLUSION:(1)The maximum displacement and motion range of the lumbar 1 vertebra with Model C in flexion and extension,left bending,right bending,left rotation,and right rotation were lowest in the tested motion states;the maximum stress of the screws and connecting rods was the smallest;and the maximum stress of intervertebral discs superior and inferior to the injured vertebra was the smallest.This was followed by the Model B,while the maximum displacement and motion range of the lumbar 1 vertebra and the stress and displacement of the screw connecting rod in the Model A were highest,but it showed the worst biomechanical stability and was more prone to adjacent segment degeneration.(2)These results show that bilateral intermediate fixation with six pedicle screws during the treatment of severe lumbar fractures is more dispersed in internal fixator stress and exhibits the least displacement and motion range of the vertebral pedicle screws and rods compared with four universal spinal system pedicle screws and four traditional pedicle screws.Thus,it can effectively reduce the occurrence of internal fixation failure and the adjacent segment degeneration.

BACKGROUND:The surgical treatment of severe lumbar fractures is mainly based on posterior short-segment fixation,and different pedicle screw fixation methods have differences in biomechanical properties.OBJECTIVE:To simulate three different screw fixation techniques in the treatment of severe L1 vertebral fractures using three-dimensional finite element technology,and to compare and analyze the biomechanical characteristics of the upper and lower intervertebral discs,fractured vertebrae,and internal fixation devices during the simulated spinal movement.METHODS:A three-dimensional model of the T11-L3 spine was established to simulate severely unstable fracture of the lumbar 1 vertebral body using the designed three pedicle screw fixation methods:Model A with 4 traditional pedicle screws(2 in each T12 and L2),model B with 4 Universal Spine System pedicle screws(2 in each T12 and L2),and Model C were bilateral intermediate fixation with 6 pedicle screws(2 in each of T12,L1,and L2).Restraint and load were applied to simulate the maximum stress and maximum displacement of the internal fixation,the displacement of the L1 vertebral body,and stress on the intervertebral discs superior and inferior to the injured vertebra during the anterior flexion,posterior extension,left-sided bending,right-sided bending and left-right rotation of the lumbar spine.RESULTS AND CONCLUSION:(1)The maximum displacement and motion range of the lumbar 1 vertebra with Model C in flexion and extension,left bending,right bending,left rotation,and right rotation were lowest in the tested motion states;the maximum stress of the screws and connecting rods was the smallest;and the maximum stress of intervertebral discs superior and inferior to the injured vertebra was the smallest.This was followed by the Model B,while the maximum displacement and motion range of the lumbar 1 vertebra and the stress and displacement of the screw connecting rod in the Model A were highest,but it showed the worst biomechanical stability and was more prone to adjacent segment degeneration.(2)These results show that bilateral intermediate fixation with six pedicle screws during the treatment of severe lumbar fractures is more dispersed in internal fixator stress and exhibits the least displacement and motion range of the vertebral pedicle screws and rods compared with four universal spinal system pedicle screws and four traditional pedicle screws.Thus,it can effectively reduce the occurrence of internal fixation failure and the adjacent segment degeneration.

Objective:To explore the clinical efficacy value of the medical failure mode,and failure mode and effect analysis(FMEA)mode in equipment management of the department of optimizing blood purification equipment.Methods:Based on the management concept of medical FMEA,a FMEA management mode for equipment was constructed to manage the hemodialysis equipment in the blood purification department of the First Affiliated Hospital of Hebei North University.A total of 83 used hemodialysis equipment in the blood purification department of our hospital from October 2022 to September 2024 were selected,and they were managed respectively by using conventional management mode and FMEA management mode.The differences of operation quality of equipment,comprehensive efficiency of equipment and the management capabilities of managers who used the equipment between two kinds of management modes were compared.Results:The average values of failure rate of equipment,self-repair rate,maintenance rate,and standardized operation rate of using FMEA management mode were respectively(4.72±0.11)%,(90.62±3.44)%,(95.42±2.43)%and(96.22±1.48)%.The failure rate of FMEA management mode was lower than that of conventional management mode,while the self-repair rate,maintenance rate,and standardized operation rate were higher than those of conventional management mode,and the differences were statistically significant(t=108.568,13.658,9.318,10.354,P＜0.05).The average values of availability ratio of equipment,ratio of performance index,and ratio of quality index of adopting FMEA management mode were respectively(91.04±2.65)%,(96.94±2.31)%and(97.66±1.19)%,which were higher than those of conventional management mode,and the differences were statistically significant(t=19.330,13.085,14.889,P＜0.05).The scores of job responsibilities,basic knowledge for equipment,guarantee capabilities for operation and management performance of manager were respectively(94.12±2.76),(92.03±2.50),(91.35±2.62)and(93.65±3.28)in using the FMEA management mode,which were all higher than those of the conventional management mode,and the differences were statistically significant(t=7.630,11.027,17.311,11.645,P＜0.05).Conclusion:The application of medical FMEA management mode in the management for hemodialysis equipment in the blood purification department can improve the quality of equipment operation,and reduce the failure frequency of equipment,and enhance the overall utilization efficiency of equipment,and improve the quality of clinical services in the department.

Objective:To explore the clinical efficacy value of the medical failure mode,and failure mode and effect analysis(FMEA)mode in equipment management of the department of optimizing blood purification equipment.Methods:Based on the management concept of medical FMEA,a FMEA management mode for equipment was constructed to manage the hemodialysis equipment in the blood purification department of the First Affiliated Hospital of Hebei North University.A total of 83 used hemodialysis equipment in the blood purification department of our hospital from October 2022 to September 2024 were selected,and they were managed respectively by using conventional management mode and FMEA management mode.The differences of operation quality of equipment,comprehensive efficiency of equipment and the management capabilities of managers who used the equipment between two kinds of management modes were compared.Results:The average values of failure rate of equipment,self-repair rate,maintenance rate,and standardized operation rate of using FMEA management mode were respectively(4.72±0.11)%,(90.62±3.44)%,(95.42±2.43)%and(96.22±1.48)%.The failure rate of FMEA management mode was lower than that of conventional management mode,while the self-repair rate,maintenance rate,and standardized operation rate were higher than those of conventional management mode,and the differences were statistically significant(t=108.568,13.658,9.318,10.354,P＜0.05).The average values of availability ratio of equipment,ratio of performance index,and ratio of quality index of adopting FMEA management mode were respectively(91.04±2.65)%,(96.94±2.31)%and(97.66±1.19)%,which were higher than those of conventional management mode,and the differences were statistically significant(t=19.330,13.085,14.889,P＜0.05).The scores of job responsibilities,basic knowledge for equipment,guarantee capabilities for operation and management performance of manager were respectively(94.12±2.76),(92.03±2.50),(91.35±2.62)and(93.65±3.28)in using the FMEA management mode,which were all higher than those of the conventional management mode,and the differences were statistically significant(t=7.630,11.027,17.311,11.645,P＜0.05).Conclusion:The application of medical FMEA management mode in the management for hemodialysis equipment in the blood purification department can improve the quality of equipment operation,and reduce the failure frequency of equipment,and enhance the overall utilization efficiency of equipment,and improve the quality of clinical services in the department.

OBJECTIVE To establish the specific chromatogram of Qianghuo Shengshi Tang(QHSS) reference sample, clarify the key quality attributes of QHSS, providing reference for the quality evaluation of QHSS reference sample. METHODS The SilGreen C18 column(4.6 mm×250 mm, 5 μm) was used. The mobile phase consisted acetonitrile and 0.2% formic acid aqueous solution. The detection wavelength was 328 nm. Established an HPLC characteristic spectrum analysis method for the reference sample of QHSS. A variety of chromatographic columns and different instruments were applied to investigate the adaptability of the system. HPLC-LTQ-Orbitrap MS was used to identify the specific peaks of the QHSS reference samples in positive ion mode. RESULTS There were 14 peaks in the specific chromatogram, which belonged to Notopterygii Rhizoma Et Radix, Angelicae Pubescentis Radix, Ligustici Rhizoma Et Radix, Chuanxiong Rhizome, Viticis Fructus, respectively. Ferulic acid(peak 3) was reference peak. A total of 22 compounds were identified by mass spectrometry, including coumarin and flavonoids. CONCLUSION The established specific chromatogram method of QHSS is simple, stable and reproducible. The material basis of QHSS reference sample is basically determined, providing a reference for the development and quality control of QHSS.

Objective:To study the effects of enoxaparin on osteogenic differentiation of bone marrow stem cells (BMSCs) and the exosomes derived from BMSCs.Methods:After the BMSCs from 4-week old male SD rats were cultured, their surface antigen and multilineage differentiation potentials were identified. Subsequently, the BMSCs were incubated with osteogenic differentiation medium containing 10 IU/mL enoxaparin for 14 days. After the exosomes derived from BMSCs (BMSC-Exos) were extracted by the kit method, their structure was observed by transmission electron microscopy and their surface antigen CD63 detected by Western blot. Alizarin red staining was used to analyze the osteogenic differentiation of BMSCs. Osteogenic proteins including OCN and BMP-2 in BMSCs and exosomes were detected.Results:The spindle-shaped BMSCs isolated and cultured showed a uniform spiral pattern. They expressed highly the surface markers CD29 and CD44 but lowly CD34 and CD45, indicating that the majority of the cells were BMSCs. BMSC-Exos, in an oval shape with a diameter of about 30 to 80 nm, expressed CD63. Alizarin red staining showed that the number of mineralized nodules in the enoxaparin treatment group was significantly lower than that in the control group. Western blot analysis indicated that enoxaparin inhibited the expression of osteocalcin (OCN) and BMP-2 in BMSCs. ELISA results showed that the protein levels of OCN(48.81 ng/mL ± 8.23 ng/mL) and BMP-2 (311.45 pg/mL ± 27.59 pg/mL) in the BMSCs treated with enoxaparin were significantly lower than those of OCN (80.43 ng/mL ± 10.74 ng/mL) and BMP-2 (399.23 pg/mL ± 32.25 pg/mL) in the control BMSCs ( P<0.05). The contents of OCN (1.45 ng/mL±0.15 ng/mL) and BMP-2 (18.47 pg/mL ± 0.54 pg/mL) in the exosomes from BMSCs treated with enoxaparin were significantly higher than those of OCN (1.00 ng/mL ± 0.12 ng/mL) and BMP-2 (9.07 ng/mL ± 0.36 pg/mL) in the exosomes from control BMSCs ( P<0.05). Conclusions:Enoxaparin may inhibit the osteogenic differentiation of BMSCs. The mechanism of this might be related to its direct inhibition against the expression of OCN and BMP-2 in BMSCs and its indirect reduction of OCN and BMP-2 in BMSCs through the exhaust of the above proteins in the form of exosomes.

Objective: To investigate the maternal and neonatal outcomes of fetal meconium peritonitis (FMP) cases with different ultrasonic manifestations. Methods: The clinical data of 31 pregnant women with FMP diagnosed by prenatal ultrasound and confirmed by postnatal imaging examination in Guangzhou Women and Children's Medical Center from January 2011 to December 2018 were analyzed retrospectively. According to the last prenatal ultrasonographic findings, the 31 cases were classified into the following grades: grade 0 (three cases), grade 1 (20 cases, grade 1A: nine cases, grade 1B: three cases, grade 1C: eight cases), grade 2 (seven cases) and grade 3 (one case). All neonates were also divided into two groups: the operation group (19 cases) and conservative treatment group (12 cases) based on whether or not underwent surgery. Statistical methods were independent sample t-test and Chi-square test. Results: (1) The gestational ages at the first diagnosis of FMP and birth of the operation group were both lower than those of the conservative treatment group [(29.9±4.5) vs (38.2±1.0) weeks, t=-6.202; (36.2±2.7) vs (38.2± 1.0) weeks, t=-2.426; both P<0.05]. (2) The operation rates in cases of grade 0, 1, 2 and 3 groups were 0/3, 55%(11/20), 7/7 and 1/1, respectively (χ²=10.136, P=0.017). However, the operation rates in grade 1A, 1B and 1C groups were 7/9, 1/3 and 3/8, respectively (χ²=3.446, P=0.179). Conclusions The rate of operation of FMP newborn was related to the gestational age of the first prenatal ultrasound diagnosis of FMP and the ultrasonic grade. The different grades of prenatal ultrasound in FMP cases can provide important information for guiding perinatal treatment.

PURPOSE: MicroRNAs (miRs) were recently recognized to be important for immune cell differentiation and immune regulation. However, whether miRs were involved in allergen-specific immunotherapy (SIT) remains largely unknown. This study sought to examine changes in miR-146a and T regulatory cells in children with persistent allergic rhinitis (AR) after 3 months of subcutaneous immunotherapy (SCIT) and sublingual immunotherapy (SLIT). METHODS: Twenty-four HDM-sensitized children with persistent AR were enrolled and treated with SCIT (n=13) or SLIT (n=11) for 3 months. Relative miR-146a and Foxp3 mRNA expression, the TRAF6 protein level, and the ratio of post-treatment to baseline IL-10+CD4+ T cells between the SCIT and SLIT groups were examined in the peripheral blood mononuclear cells (PBMCs) of AR patients using quantitative reverse transcription polymerase chain reaction (qRT-PCR), flow cytometry, and Western blot analysis, respectively. Serum levels of IL-5 and IL-10 were determined using ELISA. RESULTS: After 3 months of SIT, both the TNSS and INSS scores were significantly decreased compared to the baseline value (P<0.01). The relative expression of miR-146a and Foxp3 mRNA was significantly increased after both SCIT and SLIT (P<0.01). The ratio of post-treatment to baseline IL-10+CD4+ T cells and the serum IL-10 level were significantly increased in both the SCIT and SLIT groups (P<0.01), whereas the TRAF6 protein level and serum IL-5 level were significantly decreased (P<0.01). No significant differences in these biomarkers were observed between the SCIT and SLIT groups. CONCLUSIONS: Our findings suggest that miR-146a and its related biomarkers may be comparably modulated after both SCIT and SLIT, highlighting miR-146a as a potential therapeutic target for the improved management of AR.
Biomarkers ; Blotting, Western ; Cell Differentiation ; Child* ; Enzyme-Linked Immunosorbent Assay ; Flow Cytometry ; Humans ; Immunotherapy* ; Interleukin-10 ; Interleukin-5 ; MicroRNAs ; Polymerase Chain Reaction ; Reverse Transcription ; Rhinitis* ; RNA, Messenger ; Sublingual Immunotherapy ; T-Lymphocytes ; TNF Receptor-Associated Factor 6

Objective To investigate the clinical characteristics of a clustering infection caused by human adenovirus-B type 7 (HAdV-B7) which occurred in one military camp located at the southeastern coastal region in January 2014.Methods All clinical characteristics of the 70 patients were collected for analysis,including clinical symptoms and signs,chest computer tomography (CT) scans and laboratory results.Throat swabs were collected and real time polymerase chain reaction (RT-PCR) was performed to detect viral nucleotide.Results The prominent symptoms of these patients with HAdV-B7 infection included fever (100.0％,70/70),cough (82.9％,58/70),productive cough (72.9％,51/70) and sore throat (61.4％,43/70).All patients showed posterior pharyngeal wall linear congestion with ovoid follicle.Fifty-four (77.1 ％) patients had enlarged tonsils and 46 (65.7 ％) patients had tonsils covered by white secretions.Fifty-eight (82.9 ％) patients had pharyngeal follicular hyperplasia.Fifty-one (72.9 ％) patients had abnormalities on chest radiograph,including lung-marking fuzzy,pulmonary interstitial inflammation and parenchymal serous exudation.Of the 54 throat swabs from patients,34(63.0％) were identified as HAdV-B7.All patients were cured.Conclusions The clinical features of patients with HAdV-B7 infection are different from other viral infection.HAdV-B7 is easy to cause clustering infection in particular populations.Early detection and early intervention are needed to avoid exacerbation and transmission.

Objective:To investigate the effects of ALEX1 overexpression on cell proliferation and apoptosis of human breast cancer cell line MCF-7.Methods: MCF-7 cells were infected recombinant lentivirus LV5-ALEX1 and the negative control lentivirus LV5-NC,respectively.After 72 h, the expression of ALEX1 was detected by Real-Time PCR and Western blot.CCK8 assay were performed to observe the proliferation ability after 24 h, 48 h, 72 h, 96 h.The effect of overexpression ALEX1 on apoptosis was determined by flow cytometry.The level of Bax,BCL-2 and active caspase3 was detected by Western blot.Results:The mRNA level of ALEX1 markedly increased after 72 h(165.81±12.14 vs 52.29±2.32,P<0.01).In CCK8 assay,the results revealed that the cell pro-liferation was inhibited compared with control group in 48 h,72 h,96 h( P<0.05).The results revealed that overexpression of ALEX1 enhanced MCF-7 apoptosis(20.55%±2.50 % vs 3.60%±1.614%,P<0.05).The results by Western blot showed that the protein levels of Bax and active caspase were increased in LV5-ALEX1 group compared with LV5-NC group.However,the protein levels of BCL-2 was decreased in LV5-ALEX1 group compared with LV5-NC group.Conclusion:Overexpression of ALEX1 significantly reduced MCF-7 cancer cells proliferation and induced MCF-7 cells apoptosis.