Based on the high-fat diet-induced hyperlipidemia rat model, this study aimed to evaluate the lipid-lowering effect of Arisaema Cum Bile and explore its mechanisms, providing experimental evidence for its clinical application. Biochemical analysis was used to detect serum levels of alanine aminotransferase(ALT), aspartate aminotransferase(AST), high-density lipoprotein cholesterol(HDL-C), low-density lipoprotein cholesterol(LDL-C), triglycerides(TG), and total cholesterol(TC) to assess the lipid-lowering activity of Arisaema Cum Bile. Additionally, 16S rDNA sequencing and metabolomics techniques were employed to jointly elucidate the lipid-lowering mechanisms of Arisaema Cum Bile. The experimental results showed that high-dose Arisaema Cum Bile(PBA-H) significantly reduced serum ALT, AST, LDL-C, TG, and TC levels(P<0.01), and significantly increased HDL-C levels(P<0.01). The effect was similar to that of fenofibrate, with no significant difference. Furthermore, Arisaema Cum Bile significantly alleviated hepatocyte ballooning and mitigated fatty degeneration in liver tissues. As indicated by 16S rDNA sequencing results, PBA-H significantly enhanced both alpha and beta diversity of the gut microbiota in the model rats, notably increasing the relative abundance of Akkermansia and Subdoligranulum species(P<0.01). Liver metabolomics analysis revealed that PBA-H primarily regulated pathways involved in arachidonic acid metabolism, vitamin B_6 metabolism, and steroid biosynthesis. In summary, Arisaema Cum Bile significantly improved abnormal blood lipid levels and liver pathology induced by a high-fat diet, regulated hepatic metabolic disorders, and improved the abundance and structural composition of gut microbiota, thereby exerting its lipid-lowering effect. The findings of this study provide experimental evidence for the clinical application of Arisaema Cum Bile and the treatment of hyperlipidemia.
Animals ; Gastrointestinal Microbiome/drug effects* ; Rats ; Male ; Metabolomics ; Hyperlipidemias/microbiology* ; Drugs, Chinese Herbal/administration & dosage* ; Rats, Sprague-Dawley ; Hypolipidemic Agents/pharmacology* ; Liver/metabolism* ; Humans ; Alanine Transaminase/metabolism* ; Triglycerides/metabolism* ; Aspartate Aminotransferases/metabolism*

OBJECTIVE: To assess the effectiveness of bone acupuncture in improving pain and function in degenerative lumbar spinal stenosis (DLSS) and compare it with Jiaji acupuncture. METHODS: From January to December 2023, 80 DLSS patients were treated with acupuncture and divided into bone acupuncture and Jiaji acupuncture groups. Among them, 40 patients in the bone acupuncture group included 15 males and 25 females, with a mean age of (60.60±6.98) years old;anthor 40 patients in the Jiaji acupuncture group included 16 males and 24 females, with a mean age of (61.48±9.55) years old. The Roland Morris disability questionnaire(RMDQ), walking distance, visual analogue scale(VAS), and the MOS item short from health survey(SF-36) of two groups at baseline, 2 weeks, 4 weeks, and 12 weeks post-treatment were compared. RESULTS: Eighty patients were followed up for 3 to 5 months with an average of (3.62±0.59) months. There was no significant differences in general data and the scores before treatment between two groups(P>0.05). The RMDQ scores in both groups decreased significantly at 2, 4 and 12 weeks after treatment compared with before treatment(P<0.05), at each time point after treatment, the decrease was more significant in the bone acupuncture group than in the Jiaji acupuncture group(P<0.05). The VAS of waist and leg in both groups was significantly lower at 2, 4 and 12 weeks after treatment that before treatment(P<0.05). At all time points after treatment, the waist VAS in the bone acupuncture group was reduced more significant than in the Jiaji acupuncture group(P<0.05);there was no significant difference in leg VAS at 2 and 12 weeks after treatment between two groups(P>0.05), the improvement was more significant in the bone acupuncture group in the 4 weeks after treatment than in the Jiaji acupuncture group. The SF-36 scores in both groups were significantly higher at 2, 4, and 12 weeks after treatment than before treatment(P<0.05);the SF-36 score raised more significant in the bone acupuncture group than in the Jiaji acupunture group(P<0.05). No significant difference in the walking distance between two groups at 2 weeks after treatment(P>0.05);the walking distance in the bone acupuncture group was significantly higher than that in the Jiaji acupuncture group at 4 and 12 weeks after treatment(P<0.05). CONCLUSION Bone-penetrating acupuncture moderately improves functional impairment, pain, and quality of life in patients with DLSS, showing better efficacy than Jiaji acupuncture.
Humans ; Female ; Male ; Middle Aged ; Acupuncture Therapy/methods* ; Spinal Stenosis/physiopathology* ; Aged ; Lumbar Vertebrae/physiopathology* ; Pain Management

OBJECTIVE: To explore the displacement and pressure distribution of American Chiropractic in a model of third lumbar syndrome based on finite element analysis. METHODS: On March 2021, CT and MRI images of a 23-year-old male patient with right third lumbar syndrome were selected. A 3D stl model was established using Mimics and CATIA, and the data was imported into Hypermesh, Abaqus & ANSYS. The elastic modulus and Poisson's ratio of the affected side material were adjusted to establish its finite element model. Based on the comparison of the operating positions and routines of the American Chiropractic and the lumbar spine oblique pull method, but with differences in the focus and direction of force, the experimental group simulated the American Chiropractic with the healthy side (left side) lying position of the model. The upper endplate of L₃ and the lower part below L₃ twisted accordingly with the body position, we applied a vertical forward thrust of 246 N to the plane formed by the L₄, L₅ spinous processes and L₄ upper articular processes;The control group simulates the oblique pull method of the lumbar spine, requiring the model to lie on the healthy side (left side), fix the upper endplate of L₄, and perform a horizontal rotation along the longitudinal axis of L₃ vertebral body. At this time, the contact force in the upward direction is also set to 246 N. Compare the displacement and stress differences between the L₁-L₅ intervertebral bodies, intervertebral discs, articular processes, and transverse process muscles in two intervention models. RESULTS: ① Under safe load conditions, a test force of 246 N was applied to the model, and the maximum vertebral displacement occurred on the right side of the L₃ vertebral body (1.197 mm) after manual intervention in the control group. The vertebral displacement between L₁-L₅ induced by manual intervention in the experimental group was smaller than that of the control group's manual intervention (P<0.05). ② The maximum vertebral body stress occurred on the right side of the L₃ vertebral body after manual intervention in the control group (98.425 MPa). The stress on each vertebral body formed by the experimental group's manual intervention was lower than that of the control group's manual intervention (P<0.05). ③The maximum intervertebral disc stress occurred on the right side of the L_2,3 intervertebral disc (6.282 MPa) after manual intervention in the control group. ④ The maximum joint process stress occurred on the right side of the L₄ upper joint process after manual intervention in the experimental group (1.587 MPa). The joint process stress on the left side below L₁ and the left side above and below L₂ induced by manual intervention in the experimental group was lower than that of the control group (P<0.05). ⑤The maximum stress on the intertransverse process muscle was observed at the right lateral L₃ process end (31.960 MPa) of L_3,4 in the control group after manual intervention. The stress on the L_2,3 and L_4,5 segments of the intertransverse process muscle induced by manual intervention in the experimental group was lower than that of the control group's manual intervention (P<0.05). CONCLUSION The mechanical feedback of the L₁-L₅ vertebral body, the lower left side of the articular process L₁, the upper and lower left side of the articular process L₂, and the L_2,3 and L_4,5 segments of the transverse process muscle in the model indicates that performing American Chiropractic for the treatment of third lumbar transverse process syndrome can accurately hit the target pain point and allow the patient's tissue to form a low stress and low tension state after manual operation, thereby reducing the possibility of tissue damage caused by hypertonia after intervertebral joint movement, making it relatively safe. The application of American Chiropractic will be a new supplement to the traditional treatment plan for third lumbar transverse process syndrome.
Humans ; Finite Element Analysis ; Male ; Lumbar Vertebrae/physiopathology* ; Biomechanical Phenomena ; Young Adult ; Manipulation, Chiropractic ; Adult ; Tomography, X-Ray Computed ; Magnetic Resonance Imaging

It has become an industry consensus that self-assembled nanoparticles (SAN) are formed by molecular recognition of chemical components in traditional Chinese medicine during the decoction process. The insoluble components in the decoction are mostly in the form of nanoparticles, which can improve the problem of poor water solubility. However, the transfer rate of these insoluble components in the decoction is still very low, which limits the efficacy of the drug. This study aimed to refine the traditional decoction self-assembly phenomenon. The self-assembled nanoparticles were constructed by micro-precipitation method (MP-SAN), and characterized by particle size, zeta potential, stability index and morphology. The formation of MP-SAN and alterations in related physicochemical properties were evaluated using modern spectroscopic and thermal analysis techniques. The quality value transmitting pattern of lignan components within the MP-SAN was assessed via high performance liquid chromatography (HPLC). The MP-SAN showed sphere-like structure with uniform morphology, particle size of (245.3 ± 3.2) nm, polydispersity index (PDI) of (0.13 ± 0.03), zeta potential of (-48.9 ± 5.9) mV and stability index (SI) of (86.05% ± 2.27%). Comprehensive analyses using ultraviolet visible spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and other techniques confirmed molecular recognition between the decoction and ethanol extraction, leading to electron rearrangement under the influence of non-covalent bonding. This resulted in the formation of nanoparticles possessing superior thermal stability. As determined by HPLC, the encapsulation rates of the index components in the MP-SAN were all greater than 75% (dehydrodiconiferyl alcohol: 77.00%; herpetolide A: 78.57%; herpetrione: 94.53%), and the transfer rates were all higher than 65% (dehydrodiconiferyl alcohol: 96.01%; herpetolide A: 67.86%; herpetrione: 65.55%), which were 1.34, 1.38 and 4.81 times compared with those of the traditional decoction. In summary, this study successfully constructed the MP-SAN based on micro-precipitation method to achieve high transfer rate and high encapsulation rate of insoluble components in docoction, which provides a pharmaceutics idea for the efficient utilization of pharmacodynamic substance basis of traditional Chinese medicine.

Objective To analyze the stress changes of thoracic vertebra(T)11-sacrum(S)titanium rods in patients with ankylosing spondylitis after vertebral column decancellation(VCD)osteotomy,and provide reference for the selection and improvement of titanium rods before surgery.Methods The original data of the continuous scanning tomographic images of patients with ankylosing spondylitis after VCD osteotomy were imported into Mimics 21.0 in DICOM format,and T11-S vertebrae,screws and titanium rods were respectively reconstructed.They were imported into 3-Matic to establish a preliminary geometric modeling,and then processed with noise removal,paving,smoothing,etc.The improved model was imported into Hypermesh 10 software for grid division,and the material was imported into ANSYS 19.2 to display the finite element model after attribute assignment,Set the boundary and load conditions,and measure the stress value at the connection between the screw and the titanium rod.Results Under neutral position,forward bending,lateral bending,and axial rotation conditions,the titanium rod had the highest stress at the upper vertebrae(T11)and the lowest stress at the top vertebrae(L3);Under the backward extension condition,the titanium rod has the highest stress at the lower end vertebra(L5).Conclusion In the upper and lower vertebrae,it is possible to consider increasing the diameter of the titanium rod,enhancing its hardness,or changing it to a double rod.

ObjectivesBased on the changes of lung lesions in patients with COVID-19 at different stages， a nomogram model describing CT image features was established by radiomics method to explore its efficacy in predicting the progression of the disease. MethodsThis retrospective study enrolled 136 patients with COVID-19 pneumonia who received at least two CTs including three cohorts （training cohort and validation cohort 1 and 2）. Patients in the training cohort were divided into three groups according to time between onset of fever symptoms and the first CT. The clinical manifestations and CT features of each group were analyzed and compared. A nomogram to predict disease progression was constructed according to the CT features of the patients， and its performance was evaluated. ResultsThe training cohort consisted of 41 patients.A nomogram was generated to predict disease progression based on three CT features： irregular strip shadow， air bronchial sign， and the proportion of lesions with irregular shape ≥50%. AUC（95%CI）=0.906（0.817，0.995）.The C index of the training cohort was 0.906， and the C index of the internal verification was 0.892. AUC（95%CI）of the validation cohort 1 （34 cases） =0.889（0.793，0.984）；AUC（95%CI）of the validation cohort 2 （61 cases）=0.876（0.706，1.000）.The calibration curves show that the predicted values of the nomogram are in good agreement with the observed values. ConclusionThe nomogram model based on CT radiomics can predict the outcome of lung lesions in patients with high sensitivity and specificity.According to the changes of CT image characteristics of patients with COVID-19， lung lesions will be improved when the proportion of irregular cable shadow， air bronchogram and irregular lesions is greater than 50%.

Humans ; Hematoma, Epidural, Spinal

Objective: This cross-sectional investigation aimed to determine the incidence, clinical characteristics, prognosis, and related risk factors of olfactory and gustatory dysfunctions related to infection with the SARS-CoV-2 Omicron strain in mainland China. Methods: Data of patients with SARS-CoV-2 from December 28, 2022, to February 21, 2023, were collected through online and offline questionnaires from 45 tertiary hospitals and one center for disease control and prevention in mainland China. The questionnaire included demographic information, previous health history, smoking and alcohol drinking, SARS-CoV-2 vaccination, olfactory and gustatory function before and after infection, other symptoms after infection, as well as the duration and improvement of olfactory and gustatory dysfunction. The self-reported olfactory and gustatory functions of patients were evaluated using the Olfactory VAS scale and Gustatory VAS scale. Results: A total of 35 566 valid questionnaires were obtained, revealing a high incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain (67.75%). Females(χ2=367.013, P<0.001) and young people(χ2=120.210, P<0.001) were more likely to develop these dysfunctions. Gender(OR=1.564, 95%CI: 1.487-1.645), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), oral health status (OR=0.881, 95%CI: 0.839-0.926), smoking history (OR=1.152, 95%CI=1.080-1.229), and drinking history (OR=0.854, 95%CI: 0.785-0.928) were correlated with the occurrence of olfactory and taste dysfunctions related to SARS-CoV-2(above P<0.001). 44.62% (4 391/9 840) of the patients who had not recovered their sense of smell and taste also suffered from nasal congestion, runny nose, and 32.62% (3 210/9 840) suffered from dry mouth and sore throat. The improvement of olfactory and taste functions was correlated with the persistence of accompanying symptoms(χ2=10.873, P=0.001). The average score of olfactory and taste VAS scale was 8.41 and 8.51 respectively before SARS-CoV-2 infection, but decreased to3.69 and 4.29 respectively after SARS-CoV-2 infection, and recovered to 5.83and 6.55 respectively at the time of the survey. The median duration of olfactory and gustatory dysfunctions was 15 days and 12 days, respectively, with 0.5% (121/24 096) of patients experiencing these dysfunctions for more than 28 days. The overall self-reported improvement rate of smell and taste dysfunctions was 59.16% (14 256/24 096). Gender(OR=0.893, 95%CI: 0.839-0.951), SARS-CoV-2 vaccination status (OR=1.334, 95%CI: 1.164-1.530), history of head and facial trauma(OR=1.180, 95%CI: 1.036-1.344, P=0.013), nose (OR=1.104, 95%CI: 1.042-1.171, P=0.001) and oral (OR=1.162, 95%CI: 1.096-1.233) health status, smoking history(OR=0.765, 95%CI: 0.709-0.825), and the persistence of accompanying symptoms (OR=0.359, 95%CI: 0.332-0.388) were correlated with the recovery of olfactory and taste dysfunctions related to SARS-CoV-2 (above P<0.001 except for the indicated values). Conclusion: The incidence of olfactory and taste dysfunctions related to infection with the SARS-CoV-2 Omicron strain is high in mainland China, with females and young people more likely to develop these dysfunctions. Active and effective intervention measures may be required for cases that persist for a long time. The recovery of olfactory and taste functions is influenced by several factors, including gender, SARS-CoV-2 vaccination status, history of head and facial trauma, nasal and oral health status, smoking history, and persistence of accompanying symptoms.
Female ; Humans ; Adolescent ; SARS-CoV-2 ; Smell ; COVID-19/complications* ; Cross-Sectional Studies ; COVID-19 Vaccines ; Incidence ; Olfaction Disorders/etiology* ; Taste Disorders/etiology* ; Prognosis

The tissue distribution of Qingfei Paidu Decoction was studied by HPLC-MS/MS in vivo. Hypersil GOLD C_(18) column(2.1 mm×50 mm, 1.9 μm) was used for gradient elution with acetonitrile as the mobile phase A and 0.1% formic acid solution as the mobile phase B. High-resolution liquid chromatography-mass spectrometry in both positive and negative ion scanning mode and multiple response monitoring(MRM) mode was employed to analyze the behaviors of the active components of Qingfei Paidu Decoction in diffe-rent tissues. The results showed that 19, 9, 17, 14, 22, 19, 24, and 2 compounds were detected in plasma, heart, liver, spleen, lung, kidney, large intestine, and brain, respectively. The compounds belonged to 8 groups, covering 14 herbs in the prescription. After administration with Qingfei Paidu Decoction, the compounds were rapidly distributed in various tissues, especially in the lung, liver, large intestine, and kidney. The majority of the compounds displayed secondary distribution. This study comprehensively analyzed the distribution rules of the main active components in Qingfei Paidu Decoction and provided a basis for the clinical application.
Chromatography, High Pressure Liquid ; Tandem Mass Spectrometry ; Tissue Distribution ; Drugs, Chinese Herbal

OBJECTIVES: To explore the optimal maintenance dose of caffeine citrate for preterm infants requiring assisted ventilation and caffeine citrate treatment. METHODS: A retrospective analysis was performed on the medical data of 566 preterm infants (gestational age ≤34 weeks) who were treated and required assisted ventilation and caffeine citrate treatment in the neonatal intensive care unit of 30 tertiary hospitals in Jiangsu Province of China between January 1 and December 31, 2019. The 405 preterm infants receiving high-dose (10 mg/kg per day) caffeine citrate after a loading dose of 20 mg/kg within 24 hours after birth were enrolled as the high-dose group. The 161 preterm infants receiving low-dose (5 mg/kg per day) caffeine citrate were enrolled as the low-dose group. RESULTS: Compared with the low-dose group, the high-dose group had significant reductions in the need for high-concentration oxygen during assisted ventilation (P=0.044), the duration of oxygen inhalation after weaning from noninvasive ventilation (P<0.01), total oxygen inhalation time during hospitalization (P<0.01), the proportion of preterm infants requiring noninvasive ventilation again (P<0.01), the rate of use of pulmonary surfactant and budesonide (P<0.05), and the incidence rates of apnea and bronchopulmonary dysplasia (P<0.01), but the high-dose group had a significantly increased incidence rate of feeding intolerance (P=0.032). There were no significant differences between the two groups in the body weight change, the incidence rates of retinopathy of prematurity, intraventricular hemorrhage or necrotizing enterocolitis, the mortality rate, and the duration of caffeine use (P>0.05). CONCLUSIONS This pilot multicenter study shows that the high maintenance dose (10 mg/kg per day) is generally beneficial to preterm infants in China and does not increase the incidence rate of common adverse reactions. For the risk of feeding intolerance, further research is needed to eliminate the interference of confounding factors as far as possible.
Caffeine/therapeutic use* ; Citrates ; Humans ; Infant ; Infant, Newborn ; Infant, Premature ; Respiration, Artificial ; Retrospective Studies